How to Install a Kwikset Halo Touch Deadbolt

Рет қаралды 49,015

FIX IT Home Improvement Channel

Күн бұрын

Пікірлер: 17

@ThethriftyJew 4 ай бұрын

I love you man. I just bought one and hate reading instructions.

@FIXITHomeImprovementChannel 4 ай бұрын

Glad it was helpful. Check out more home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.

@kellywalker1732 Жыл бұрын

Thank you for your instructional video. I was able to tighten up the screws that had become loosened over time. 👍🏾

@FIXITHomeImprovementChannel Жыл бұрын

Glad it was helpful. Check out some home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.

@FIXITHomeImprovementChannel Жыл бұрын

Glad it was helpful. Check out some home improvement tips in our e-books www.amazon.com/gp/product/B0CNCG1V8X.

@alex-tf6xx 2 жыл бұрын

Thank you for the through walkthrough

@FIXITHomeImprovementChannel 2 жыл бұрын

You're welcome. Check out more home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.

@dannysdailys 2 ай бұрын

Thanks for the info. Made it a snap.

@FIXITHomeImprovementChannel 2 ай бұрын

Glad to hear it Check out more home improvement tips in our e-books www.amazon.com/gp/product/B0B2KW1FQ9?notRedirectToSDP=1&.

@JB47442 Жыл бұрын

It would be helpful to say that the batteries in the box are usually bad. Replacing them with new batteries got me past the red light failure. Another problem is that the cord can rub against the bolt causing the bolt to not move smoothly. I had to fiddle with the cable to get it to fit in without rubbing against the bolt. Seems like a design flaw.

@39872adnan Жыл бұрын

I am having the EXACT same issue with the cable. No matter how I tuck it in, as soon as I attach it unit to the mount, the cable gets untucked and is rubbing up with the bolt causing the "jam." Super annoying. It's just an expensive bolt at the moment until I figure this out. If I don't, I am returning it.

@hazael165 10 ай бұрын

I have the same issue with the cord…! I’ve been using the key :-(

@JB47442 10 ай бұрын

Well, the cord can be maneuvered to get to work properly but it’s tricky. I’m no handyman but fiddled with it enough and finally was able to get it to a spot that stayed clear of the bolt. It’s just a poor design.