How To Install a Lamp Post Sensor (Photocell)

[@swingdangler]

Great video and perfect for my needs! Almost identical set up in my front yard and the added written instructions for the 'never done it before' crowd on the wiring was a great added touch.

[@lawnjenkins]

Thank you.,. I'm glad I was able to help. I live in an HOA and my videos are generally geared around questions that the resident's ask. Usually it's Grass stuff, solar lights, lampost etc.

[@swingdangler]

@@lawnjenkins I followed your video to a T, had.my daughter hold the lamp. I've got a large hand so had to use a screw driver to push the sensor into the hole. I put a flame 🔥 bulb in and it looks great. Thanks again for a great video and I followed up with a subscribe.

[@DanCohn-g8m]

Your video is the most simple, straight to the point, calming video I have ever seen! Job well done!

[@lawnjenkins]

I really appreciate that! Thank you for the kind words. I try to put videos out there that help people around the house.

[@jeroldlmurray1616]

Simply, direct and right to the point w/o being long and drawn out. Many thanks,

[@lawnjenkins]

I Know Right. Either direct to the point or add chapters in the video to help you get to the part you want to see.

[@JamesHoffman-b8t]

Nicely done. We moved into a new house that the front yard light was on 24/7. I bought the photocell and after watching your video once, it was a piece of cake. Not hard at all, but when you have never taken one of these apart before, seeing it before trying i helps a ton!

[@lawnjenkins]

Glad the video was of value. You saved $$$ doing it yourself. GREAT JOB!

[@TheAkianna]

Thank you so much for this video. 💗 Yours was the instructions that were simple AND right :)

[@lawnjenkins]

Thank you. I really do try to make it easy. I try not to make my channel with too much extra info that you don't need.

[@armandohernandez-pp1qh]

Thanks a lot for your video, it’s exactly what I was looking for, you explained so easy that saved me a lot of time, God bless you for this video!!!

[@lawnjenkins]

I really appreciate it. Thank you for watching. I am on an HOA board in my community and I tell my neighbors to share my page because I try to post videos that I have been asked in our HOA meetings as much as possible. A lot of these videos will help any person though not just HOA folks.

[@lchiphopkins4518]

Thanks a million. I connected mine correctly and saved money and time. You made it so easy

[@lawnjenkins]

Glad it helped. I appreciate the feedback.

[@gilly2571]

Thanks a lot for this !!! Really helped me and saved me a ton of time with the on screen directions.

[@lawnjenkins]

Yes - it isn't too difficult and the lighting looks really nice in the evening.

[@rlccar8518]

Excellent video‚especially the explanation which wires attach to which. Most people do not put this much work or detail into their videos (one guy literally had "call an electrician" as one of his steps). Thanks for the explanation. I'll be doing this tomorrow.

[@lawnjenkins]

I appreciate it. I like to show people what and how I do things. I always say "use a professional. but this is how I do it". Thank you again.

[@deek9125]

This was a HUGE help! Thank you so much for posting!

[@lawnjenkins]

Thank you for watching and replying.

[@jrahman1025]

Thank you. Saved me time and money.

[@lawnjenkins]

Glad it helped. I appreciate the feedback.

[@duanecagle1690]

Good demonstration!👍

[@lawnjenkins]

Thanks! I appreciate it. 👍🏽

[@RightStop2SHOP]

How would I replace the photocell if there is not a way to remove the top of the post. Is there something that can clean the photocell lense?

[@lawnjenkins]

I haven't see a post like that but maybe your photo cell can be screwed out enough to reach the wires.

[@Teeheyward]

great video. I was able to change it with no problem

[@lawnjenkins]

Glad it helped

[@traderabbit8408]

hey what kind of wire we can use to connect this lights, and how to connect multiple post lamp

[@lawnjenkins]

I believe I have 12 gage UF romex. but I would CERTAINLY reccommend that you find an electrician if you ar hooking one up and trying to connect them.

[@James-yb4uq]

Extremely helpful! Thank you!!!

[@lawnjenkins]

I'm glad it helped you. I have a lot more projects lined up this year. Stay tuned.

[@amitchell4206]

So is simple? Turn the breaker off, black wires go together,red as well and white as well?

[@lawnjenkins]

Yes - it's not difficult at all. Just make sure the breaker is off.,., Now I'm not a licensed electrician so I can't tell to just go ahead and do this without worry. If you try it it will be your decision but I myself have done this many times. I really appreciate you taking the time to watch and comment. Thank you.

[@amitchell4206]

@@lawnjenkins Thank you!!!! I actually did it earlier and I connected everything the way it was I knew the light was bad so I didn’t had to change the sensor but is dark now and the new light is shining and I’m actually proud of it, I do little projects around the house when is a big one I hire a contractor but I’m just like you I watch videos and go for it!! 👍🏻🙏🏻

[@lawnjenkins]

@@amitchell4206 yeah that's the best way. I have work NUMEROUS home rehab jobs and just learned as I went. Also, youtube is GREAT for getting that video on the one piece you may not know. 😂

[@mikcall54]

Best if you have a 5 ft stepladder and set it next to the post and lay the light on it. Then disconnect each sensor wire one by one and reconnect the new one one by one. Then remove the old sensor and put the new one into the hole. With the wires already connected you cannot accidentally drop it down the inside of the pole.

[@lawnjenkins]

Yep that is a step ladder but I could only get it so close because of all the mature shrubs next to the post and the wires on the light would not reach to lay on the ladder anyway because the original wires were sooooo short 🙂🙂. also at 2:45 of the video I tell people how to not drop it down in the post by using a string tied to the photo sensor. Using a string is what I found works best. Great points though.

[@StephenThomas-z2i]

Where does the red wire from the sensor connect?

[@lawnjenkins]

take a look at 3:03 of the video. Thanks for watching. I appreciate it.

[@Ryanrock2]

good job Lawn!

[@lawnjenkins]

thanks. I appreciate it.

[@derekblack5897]

My lamp only has the one ground wire coming from the fixture, but no ground wire coming from the post. any recommendations? My light randomly went out the other month and i replaced the sensor today but it still did not come on tonight. thanks

[@lawnjenkins]

If you have romex wiring, it has a protective sheath. Sometimes a wire could be pushed down into the sheath where you can't see it. If I were In your particular situation I would get an electrician to look at it because it sounds like you may have two or three different things going on. It won't be expensive to get a pro to find out the real issue.

[@duanecagle1690]

No prob! It helped me out! Thx

[@lawnjenkins]

Glad it helped!

[@kengill6025]

Shout out to Cleveland State Vikings!!

[@lawnjenkins]

AHHHH YEAH!!!! SWEEEEEET!

[@Kiddro22]

Yeah mane, have to be handy when owning a home. Unless you have deep pockets. Especially in these times we’re in.

[@lawnjenkins]

EXACTLY! And for less than $10 you can do it yourself.

[@bijougandarillas7626]

Went to fast red goes where and black where to😂

[@lawnjenkins]

3:03 of the video