How To Install A Remote Starter On A 2010 Hyundai Elantra

[@nacl0708]

Thank you so much for making this video. I am about to install Viper 5704V on my 2008 Hyundai Elantra and this video helped a lot to get a sense of the installation.

[@Car-Radio-Bulbs]

Glad it helped.

[@abdullahio8074]

do you know to connect the relay ? it's showing in the video 2 orange wire coming out the fuse and they are the ones that got connected to the 2 batteries cable

[@mattstedwell4369]

Thanks for the video Jeff. I really appreciate your thorough explanation and side commentary. Its really helped a lot

[@wifiox]

Great detailed video, thanks. I have a question, you didn't need a bypass module, how could I tell if my 2009 Elantra will need one?

[@loganshumway1026]

Hey great video, very helpful. I’m doing an install on a 2002 Elantra and can’t find an accurate wiring diagram and I can’t figure out how to wire the door lock/unlock. How can I tell which wires are which using a multimeter? And do you know where I can get an accurate diagram of the wires in the kick panel? Thanks!

[@Mrcaffinebean]

Great video I’m doing this on a Sonata this weekend. Hopefully the voltage sensing works for me. Any idea why that sometimes doesn’t work?

[@davidbaxter6429]

Mrcaffinebean did it work for you?

[@liveandletlive2894]

Is a 2011 sonata same or similar

[@krieger67333]

Im having trouble finding a wiring diagram for my 2013 Hyundai Elantra limited. Any suggestions? Ive googled everythingm

[@dangerousmoogle2876]

I was just wondering what kind of remote start did you use? I'm looking to put one on my 2013 Hyundai Elantra Coupe GS. I'm also wanting to update the radio system (put the reverse camera in and navi-system). I was wondering if you had any recommendations that would drive up the value of the car?

[@joseestrada0690]

Hello I need a wiring diagram on the 2010 Hyundai Elantra touring I can not find the unlock n lock n the parks light and the trunks release wired on my car

[@jgarcia1925]

I just have a quick question, i am working on a 2010 santa fe, and the door locks are the same way. i have the tech tip that is similar to the one you showed. except that this one uses only on diode, can you tell me if it should work fine as well? other wise can you send me a cope of that tech sheet?

[@rodger6940]

do you know if the idatalink or flashlogi bypass are reflashable for other car ,I yunkard my 05 car an I want to install it on my 07 hyundai elantra I just wondering if I can reuse

[@ericdg23]

Any reason as to why only the keyfob would work after and not the drivers side panel lock button ?

[@leslieadams6702]

How much does this job cost and where to get it done I have a Hyundai 2013 Elantra and was told to remove the aftermarket remote start and repair the harness. Who does this I need help.

[@OMGGotYear]

Hi can you help my i got a magicar m871a alarm and i am trying to setup the remote starter but my question is i only have 1 ignition wire so is that the only one i need? And the starter line is the wire that only gives 12v when i crank it right?

[@Car-Radio-Bulbs]

Jeff sodg If you only have 1 ignition wire that's the only one you need to hook up. The starter wire is the only one that shows power when you crank the ignition not any other time.

[@connorsturgeon4499]

Does anyone know where the wire that goes into the coil connects to?

[@howcin]

I have a 2008 Hyundai Elantra, looks the same as this car. I have 2 questions. There is no security bullshit you have to deal with? Also do you have any t harnesses available to make this installation easier and cleaner?

[@faizankhan6731]

hey were you able to install remote car starter in your car i have 2007 hyundai elantra can you please help me with the installation process and what product did you bought please help me if possible

[@nessaaayl9266]

Is this same process for 2010 hyundai sonata?

[@capitalp1869]

This should work for a 2010 Hyundai Accent too right?

[@Car-Radio-Bulbs]

No. Completely different car.

[@bettyboop2447]

Hi I have a 2012 Hyundai Tucson and I want to put in a remote start. but a little scared of which wires

[@Car-Radio-Bulbs]

+Betty Johnson I would let a professional do it, because 1 mistake could cost you a lot of money.

[@nacl0708]

Thank you for this video. I am about to instal Viper 5704V on my 2008 Elantra and I am wondering how do I get a wiring diagram of my car? Do you know where to find it? And please tell me if you have any advice for me. Thank you.

[@flarefamas1248]

Hello where can I buy one of these remote starters can't find it on your site?

[@Car-Radio-Bulbs]

Flare Famas They no longer make that model remote start and I quit carrying​ them they are to much of a Hassel.

[@flarefamas1248]

audioxpress 1 do you know where I could buy a good quality one at

[@liveandletlive2894]

@@flarefamas1248 Amazon

[@keykrazy]

eBay. (Got one for my 2008 Hyundai Sonata for $26.00 buy-it-now with free shipping. Think i might take it to my friend's shop for the installation though -- looks like this job's just a bit more involved than i was expecting.)

[@felixlarose1884]

where did u get the wiring diagram for the car

[@Car-Radio-Bulbs]

Online at the audiovox website many years ago.

[@datgamerboy123]

For those who do not know: Air Bag connectors are ALWAYS yellow. Orange wires with orange wire loom usually indicates HIGH VOLTAGE, and is a wire that you should not touch or deal with unless you know what you're doing.

[@jonathanrichardsonwundreamteam]

how much is normal installation for this on a 2012 hyundai elantra?

[@Car-Radio-Bulbs]

I have no idea, you would have to contact a local installation shop.

[@3588aj]

Will this work same for 2011 Sonata push button start?

[@Car-Radio-Bulbs]

No it will not that's a completely different car.

[@liveandletlive2894]

@@Car-Radio-Bulbs because of the push start or because it's a sonata?

[@Car-Radio-Bulbs]

@@liveandletlive2894 yes to both

[@liveandletlive2894]

@@Car-Radio-Bulbs ok thanks think I'm gonna try on my dads 11 sonata...do I need an immobilizer bypass and another Q if a car has a push button start does it need a bypass

[@Car-Radio-Bulbs]

I have no idea what you will need for that car.

[@antuanperes]

Hi, i want to remove mine, is onstart

[@oralwayne7273]

I JUST HEAT THE WIRE AND PULL

[@Car-Radio-Bulbs]

[@howcin]

Hey I have some questions about this video. Could you email me or add me to circles and we'll use Google Chat? Thanks!

[@ryancampos2826]

Need help on video email me [e-mail]