How to install a Ring Floodlight Cam (no existing wires/device)| Part 1

Subscribe and help me reach 100k subs ❤️. Thank you for your support 🙏
Hi everyone,
In this video I will show you how to hardwire a Ring Floodlight Cam Plus from an Outlet. It took me less than 30 minutes to install a Ring Floodlight Cam Plus. Here is the link for the PART 2 - • How to Install a Ring ...
Products used in this video:
Ring Floodlight Cam Wired Plus - amzn.to/3W3Fe2S
GFCI Outlet Tester - amzn.to/3jCtiak
Screwdriver - amzn.to/3VudQui
Drywall/Jab Saw - amzn.to/3WKZibj
Ryobi 18V Multi Tool - amzn.to/3VwwYb9
ryobi multi-tool blades - amzn.to/3PYh6wJ
bosch laser level - amzn.to/3C98AoZ
Tape Measure - amzn.to/3FjXejV
Ryobi Drill/Driver - amzn.to/3Fm1HCP
Round Weatherproof Box - amzn.to/3G14yAd
14/2 wire (50 ft) - amzn.to/3WFRl6G
Wire Stripping Tool - amzn.to/3I802T6
Head Nail Drive Anchors - amzn.to/3Wy9tQc
Diablo 4 in. x 7 in. (SDS-Max) Carbide Tipped Core Bit - amzn.to/3HaPyBo
SHEUTSAN 4 Inch (SDS-Max) - amzn.to/3H6cEcf
Do you want to support my channel? Like and subscribe! It is gonna help me a lot! Thank you so much!!!
Other videos to watch:
How to install a Ring Floodlight Cam Wired PRO
• How to install a Ring ...
How to Install a Ring Floodlight Cam Plus
• How to Install a Ring ...
How To Replace An Exterior Electrical Box • How To Replace An Exte...
#RingFloodlightCamPlus #ringcamera #RingFloodlightCamInstall

[@CreativeProcessDIY]

Hey guys, here is link for the Part 2 : How to Install a Ring Floodlight Cam Plus (Install and Set Up) kzbin.info/www/bejne/nHe9q3qYeM-Bh80

[@cynthiahernandez6931]

What if I do not have a wall socket near garage door?

[@Bluelightning23]

What if there was a frame stud where you drilled the hole for the junction box?

[@gisthefirstbisthesecond9820]

Totally not to code. You should say you are not an electrician and this video is for entertainment purposes only.

[@CreativeProcessDIY]

@@gisthefirstbisthesecond9820 do you even know what you are talking about?

[@rikkithomas6700]

Thanks for the video. Think it’ll just be easier to return the camera.

[@CreativeProcessDIY]

Thanks for watching!

[@drewtorres5371]

Video was dog 💩

[@yunggass116]

😂😂😂 fr

[@TharakaUkwatte]

Just buy 1 with plug-in cable

[@LAX-J]

Lmaooo

[@jeremiahharrod1492]

I like a video like this because I watch other videos, to set it up, but they don’t quite help because they’re taking out the flood lights and that’s not really the one I’m looking for, but thank God I found this video the one I’ve been looking for

[@CreativeProcessDIY]

Thank you for nice comment!

[@rysword]

If you're trying to install the Ring Floodlight cam (model # 2210C-XYZ) with a 5" base and you need a junction box for it, you'll discover that round junction boxes with 5" diameters are very difficult to find. The large majority of them are 4". I finally found one that'll fit. It's the Grainger Surface mount wiring box, 5", White (model # 14G265). But, bear in mind that Grainger has really odd hours. They close at 4 pm on weekdays, and they are closed all day Sat and Sun.

[@Mia-ht8oi]

Oh good to know! We have an electrician coming to install the Pro to replace the traditional floodlight for $195, but that spot is next to the porch door, which is not too high above ground. I'm a bit concerned that intruders can just reach it and remove 😅. We'd want to install it higher, but now that I bet the electrician cost would be twice as high 😅🙃🤑.

[@sebd1171]

You're the 🐐

[@eirosgame8701]

This is why I like KZbin university.Thank you 🙏

[@Venx2ss]

Why did you leave the romex visible, couldve ripped open the ceiling in the garage to run from the garage door opener

[@michaeljames9096]

Why not just of run it to the outlet above the garage door opener ? Inside of the sheet rock ?

[@Arckiz]

Good video! Next on the list 👍

[@CreativeProcessDIY]

thanks for watching!

[@pbsdesignphoto]

I’m in the same situation, block construction garage. The video skipped the drilling of the rest of the hole to fish the wire through to the other side. How did you drill that hole? Expensive masonry bit?

[@TheLostAdventuress]

You cant run romex wire on the surface of the wall needs to be in the wall the entire way..... or run THHN wires in conduit like plastic pvc or emt or flex conduit 😅

[@Oneklickmedia]

I’m curious if it’s only sticking out say 4 inches under the over hang is that an issue? Or should I still cover with conduit ? Like is it just for weather protection or prevent something or someone actually puncturing it the future

[@TheLostAdventuress]

@@Oneklickmedia I mean that’s fine just keep an eye on it lol it’s more for physical damage and weather, it’s not to code but you’ll be ok

[@pacman9047]

Sir, what hole saw did you use?

[@SabaFaizanMUA]

Aww this is the video i ve been looking for. I have same issue. I dnt have any wired so i have to install new one for put this camera. Its nt easy. We need and electrician. Can u please tell me the extra wire that u used for the junction box was it with the camera or u have to buy separately

[@TheoneandonlyG.G]

Looks good exactly how i did mine

[@CreativeProcessDIY]

thank you for watching!

[@serious.business]

You were quite confident with what you did to have started screwing everything in place before testing. Since this is a tutorial, you should let people know to test to make sure everything works before screwing everything sealed.

[@CreativeProcessDIY]

👍

[@frankvo4819]

Did you need an adapter to go on your drill? Or can it be just as any other bit and goes right in?

[@vbuen323]

I don’t get it, why not wire the camera to an extension cord and plug the cord into the outlet? That’s what I did, works just fine

[@NaztyNapkinz]

Coulding you run junction box and mount it on the outside and an adapter on the outside? No need for such a huge hole.

[@ugsisr]

Well I don't know if you do this for a living or not but I do. Let me say this... Your Electrical leaves room for improvement . Thank You

[@julyzerg1]

LOL WHAT should he have done better, tell us?

[@BreakTime10101]

Looks like you got a little close to your garage door opener track mount above the spring. I would have moved the hole.

[@Aries-ur8lv]

Me thinking my flathead, drill, and maybe a butter knife would solve my problems. My husband would come home to find our house destroyed 🤣 great video though. Guess I’ll hold off on this camera.

[@sisters1474]

Same

[@tuantran5792]

Great video. I am thinking doing the same myself for a flood light in front of my garage. Can you please send me a link where you bought the circular junction box and the nail you used to nail the junction box to the concrete wall? Thank you.

[@CreativeProcessDIY]

Thanks! Everything is listed in the description of the video.

[@tuantran5792]

@@CreativeProcessDIY thank you so much sir! Keep posting, I love your videos. You inspired me to DIY!

[@tuantran5792]

@@CreativeProcessDIY sorry, I don’t see the circular blade you used to cut into the stucco for the round junction box. Please post? Thank you.

[@eddybenss]

I don’t see the circular blade either

[@KingBones49]

Home Depot

[@keimult]

will it work if the lights are on a light switch? such as on a moble home

[@CreativeProcessDIY]

yes

[@JediFOMO]

Can i run the wire off the wires of the garage door opener?

[@Pinky_1775]

Yes

[@Tommy-rf9sw]

How much will it typically cost hiring an electrician to do this? In my case, they’ll have to drill through brick for access to the wiring of where I want the camera to be.

[@ronaldspitz]

that's what a hammer drill is for

[@jiminutez]

6/3/24 Where did you get that nifty wire splitter?

[@adriansilva9301]

Why did you make another box hole? Switch?

[@tritenteske8152]

What kind of new wire did you run from the camera to outlet?

[@CreativeProcessDIY]

I included a list of materials used (w/links) in the description

[@plucio0912]

14/2 romex works

[@marconuguit151]

The floodlight I got was a 2nd gen model, it has aluminum strands. Is it safe to connect it to copper wire?

[@CreativeProcessDIY]

not sure, try to contact ring customer service. they should answer your question

[@sammy_vicious]

Ooo good question - did you get an answer? I have copper wire as well 😢

[@Whatta33]

Bro just PLUG THE DAMN THING IN

[@sammy_vicious]

Ok bc it came with a plug. 🙄🤣

[@LittlePencils]

@@sammy_viciousplug in add on is like $20 on Amazon

[@LorenDarsen]

Как всегда шедевр. А стены тонкие?Гипсокартон?Где выключатель?

[@CreativeProcessDIY]

Thanks for watching! Yes, it is drywall. The floodlight Cam must work 24/7 so it does not need a switch.

[@stimpack-3193]

While I appreciate what you did here, this looks pretty rough! Not as in difficult, but it could be cleaner.

[@haunthunterify]

Do you really need a junction box with this camera? The junction box is attached to the camera. I would’ve just made a hole in the stucco for the Romex wire and then use the integrated junction box and seal everything with the included waterproof gasket and silicone.

[@catlove6332]

Does the drywall contain asbestos?

[@thunderchild2237]

Where is reset button please

[@gregdebacker4998]

Move the red slider back

[@ronaldspitz]

Florida hack job at its finest

[@badaxtion1878]

Can you use that circular drill bit on brick?

[@CreativeProcessDIY]

yes

[@ciancialarm]

ring makes an adapter that easily plugs into the wall outlet

[@CreativeProcessDIY]

thanks for letting me know about that. the floodlight cam has been already installed, why would I need it?

[@iamsoiexist7192]

Thank you or mentioning this that's exactly I will do . I cannot afford an electrician and I'm pretty sure I will fail even with this tutorial lol

[@TylerTheIllest]

Why not run the wire down the wall from the attic and avoid all the holes?

[@CreativeProcessDIY]

the garage is a basement. the ceiling in the garage is a floor in one if the bedrooms on the second floor. no way to avoid any holes in this case

[@RCjunkie]

Thanks for buying a Jeep!!!!

[@amirharris473]

😂😂😂

[@rachaelhammermeister9964]

Now you have all these holes in your wall

[@CreativeProcessDIY]

holes have already been fixed and painted 👍

[@ctrlcommand8131]

​@@CreativeProcessDIYDo you have a video on how you patched those holes? 😂

[@SynysterGoose]

This is some Janky shit lol

[@wayneguy6043]

Novice….

[@ranbo5150]

Hack central

[@original_no_name]

This is so illegal....

[@CreativeProcessDIY]

have you actually done something yourself??

[@GreatLaker69]

This is his property. What is illegal?

[@rellt5498]

@@GreatLaker69 More of a building code violation than illegal, he's not going to get arrested or anything lol. One thing for sure is that he has romex wire on the surface of a wall. Romex is not to be surface mounted along a wall, you would need THHN wire and run conduit along the wall, other wise open up a few more holes in the wall to run the romex through then patch the holes afterwards.