How to Install an in-wall speaker the correct way! Professional Speaker Installation!

Professional technicians by Divine Audio Visual explain step-by-step how to install an in-wall speaker from any brand. Follow this guide to get it done the right way
We are professional AV and Home Theater | Home Theatre installers in DFW Texas.
Custom system design - Free of charge - Call our audio engineer Warren 214.600.4144
Website: Avoftomorrow.com
Email: [e-mail]
Service Areas: Home Theater installation DFW | Home Theatre installation Dallas | We service DFW Dallas area including Frisco, Mckinney, Prosper, Little Elm, Las Colinas, Irving, Celina, Melissa, Southlake, The Colony, Savanna, Lewisville, Carrolton, Plano, Allen, Fairview, Lucas, White Rock, University Park, Highland Park, Flower Mound, and parts of Austin by request.

[@silvanadair4888]

For the hole cutting, if you don’t know what’s back there, start with a small hole to probe for hazards before expanding to full size

[@DivineAV]

@@silvanadair4888 wise words, indeed

[@briannewson8395]

Very helpful video guys. Just installed my first in wall speaker. 6 more to go. Thanks!

[@dlorbieski]

Informative and well presented....thanks for sharing 👍👍

[@jadan2000]

Thx for this How to guide.

[@vishnuramia2140]

So in the prewired part. How do you install the speaker. Wouldn’t the stud get in the way of the speaker clap? The clamps on the speaker are supposed to grab on to drywall right? How do we get around the side that is next to stud?

[@DivineAV]

Drill a very small pilot hole through the clip and run a screw straight into the stud. Very simple procedure and doesn’t damage the clip. Thanks for watching.

[@Doctrtony]

New construction speaker brackets are clutch in this situation 🙏

[@hometheaterman1424]

That was a really great video Warren and Dereck I learned a lot by just watching your videos you guys are doing great. Where was Mercedes and Bennie at? And who was filming?

[@DivineAV]

My brother and I traded off filming. Mercedes was doing the rack and Bennie back in Dallas on another job

[@hometheaterman1424]

@@DivineAV wow that's awsome Warren. Great job buddy.

[@julioemory8339]

instablaster.

[@RJ-js3bh]

Helpful video. Recognizing it’s a year old and you may not be monitoring comments, you mentioned not using a speaker grill behind an AT screen. A screen manufacturer told me the grill is actually beneficial, and I don’t recall why. It logically makes sense to remove, so I was surprised when they told me keeping on is best. Any insight/thoughts?

[@DivineAV]

Hey buddy, we appreciate you watching and we try to rest to get back to all the comments no matter what video. As far as sound quality, removing the speaker grill will certainly cost less obstruction of sound. However, certain speakers have reflective materials on the drivers and therefore you may see them shining through the screen if you don’t have the speaker grill installed. If you’re going to install the speaker grill, I would remove any cloth backing and spray paint the grill matte black. Thanks for watching my friend, we will have some new content out shortly. We’ve been doing a ton of jobs

[@FBC2012THECOLONY]

What kind of magnets where those called and where can you purchase them?

[@yolandagilliams2]

Can these speakers be used to transmit infrasonic sound through the wall of neighbor that share wall...I don't know if it's this type of speaker but most likely a directional one...

[@jcnevamind]

How do the clips work if you’re up against a stud?

[@AllAboutVideography]

Hi there, I really enjoy your videos. A question for you. Do inwall front speakers need to be angled to the sweet spot listening position like floor speakers?

[@DivineAV]

Great question. In an ideal world, yes. But we don’t typically have that luxury so we choose a wide dispersion speaker to act as the LCRs. Having speakers behind the screen is the most cinematic solution. Feel free to reach out if you need product. Divineavinc@gmail

[@djdnewworld]

Any video on 2 story house of running speakers wires on the first floor.

[@DivineAV]

We don't have any videos of that at the moment but there's multiple ways to run wires. If you're trying to do ceiling speakers, you can go upstairs and see if you have carpet above that area, you can basically run flat or thin speaker wire under the carpet and drill through the floor to drop the wires. The equipment can be somewhere upstairs in a closet where you at an outlet and then use universal remote control to operate things.

[@MarvinWoodard]

Appreciate this video. Very informative. However, how would those same Klipsch speakers clamp in next to the stud? Asking cause I've had issue with that in the past where the clamps bumped up against the studs instead of locking in.

[@JoseRodriguezFrio]

move the speaker, stud isnt going anywhere

[@bodydes]

Curious as well. He pulled the jbox, flush cut to the stud to install the speaker. If the clip system spirals towards the top or bottom plane first it would trap drywall then hit the stud. Take advantage of studs being vertical... But I've no idea if that's how it works... Looking to those in the know.

[@DivineAV]

Hey guys, we never saw this comment. Use a screw and screw it into the stud so the clip can grab on to the screw. You can also screw straight through the clip into the stud if you’re not worried about warranty.

[@pluggedindacityproductions3512]

hey what was the link to those rare earth magnets

[@JoseRodriguezFrio]

soundproofing?

[@arjundhillon5214]

What’s your thought on back boxes ?

[@DivineAV]

They do make a pretty significant difference with low end frequency response. We have custom built a few of them and ported them into the room. It was pretty awesome. We will probably be custom making these soon

[@pmc13812]

Can you please advise if this is adequate for concrete wall ?

[@DivineAV]

These clips can attach to concrete board if it is suspended from studs. Please elaborate if that doesn’t answer your question. Thanks

[@josearuquipadiaz3557]

Saludos. Destruir la pared para un gusto me parece al exagerado. Mi opinion.gracias

[@kuisin88]

Curious. I assuming that in wall speaker would do well in hollow wall. What happen if the wall is filled with insulation? Would it still work?

[@DivineAV]

It will do just fine. Punchier mid range but less low end Frequency response

[@kuisin88]

@@DivineAV Thanks for the reply. Lower end can be augmented with sub(s).

[@DivineAV]

@@kuisin88 sure thing. I would go with a decent speaker like Klipsch CS so your mid range isn’t distorted. A good punchy sub helps from 150hz-28hz range.

[@yolandagilliams2]

I am being harrassed by low frequency sound

[@chrissimons8748]

Poor Chisel!

[@DivineAV]

www.homedepot.com/p/Buck-Bros-Economy-Wood-Chisel-Set-3-Piece-40601/100076202 They were eight dollars back when we purchased them six years ago. Still going strong 😊

[@sethbishop3306]

I hate logos on speakers, its trashy. good work dirtbag.

[@sethbishop3306]

I bet you remove the tag on the mattress too!