10 ай бұрын
Жыл бұрын
2 жыл бұрын
Пікірлер
@antoniocolonjr.9642 2 сағат бұрын
How many watts rms do you recommend for the 8000f
@JayPatrol 18 күн бұрын
How do you wire them if you don't want to biwire them
@DivineAV 18 күн бұрын
@@JayPatrol just leave the jumpers on and then run the positive and negative to the lower terminal
@JayPatrol 18 күн бұрын
@@DivineAV thanks
@JeffD-bl4rr 27 күн бұрын
I have seen these 2 projectors and the epson was so much better than the sony. I didn't see what you show!! ???
@DivineAV 26 күн бұрын
@@JeffD-bl4rr probably wasn’t configured properly. The Sony is native 4K. The Epson is a shifting Projector. The Epson has a better feature set and professional geometric correction. Build quality definitely goes to Epson, but overall clarity is Sony all day long. Colors, is a tossup but maybe a slight edge on Epson. Really depends on the individual person. We have both on display and we often sell both.
@usaidulu 28 күн бұрын
I have also installed 165” curved screen in my home theatre with 13.2.4 audio..
@DivineAV 27 күн бұрын
@@usaidulu nice, Trinnov?
@Mortagleus 29 күн бұрын
How is the install on exterior walls with vapor barrier?
@DivineAV 29 күн бұрын
@@Mortagleus depends on the build, but most likely exactly the same. In the United States the majority of walls are going to be 2 x 4 or 2 x 6. From inside out: sheet rock, insulation in stud cavity, Osb sheathing, vapor barrier, exterior finishing solution. There wouldn’t be a vapor barrier on the sheetrock side because then it would lock in moisture between the studs. If you’re talking about mass loaded vinyl or something like that, you would need to use a back box with mass loaded vinyl, completing the circuit. Let me know if that answers your question. Thanks buddy.
@DivineAV 29 күн бұрын
I’m realizing, perhaps you’re talking about putting an in wall speaker to play into an exterior space like a patio. If that’s the case, cut the hole out first using a jigsaw, Get a specific back box for the speaker that you’re trying to use, cover the entire backside of the box with something like Dynamat, Put Weather strip around the inside of the speaker lip prior to installation, install the speaker securely. If it’s an in ceiling speaker, like on a patio, if you have access above, use an insulating dome and poly seal that against the ceiling material. Then install your ceiling speaker.
@silvanadair4888 Ай бұрын
For the hole cutting, if you don’t know what’s back there, start with a small hole to probe for hazards before expanding to full size
@DivineAV Ай бұрын
@@silvanadair4888 wise words, indeed
@bikdav Ай бұрын
I just got a TX-RZ50. Talk about high end audio without all the separate boxes.
@raphaelmeillat8527 Ай бұрын
One of the best and most straightforward demo I've seen on two good models. Thanks for sharing this!
@Trying2show Ай бұрын
This theater room is absolutely gorgeous! Finally someone got it right. It actually looks like a 4DX theater. Love the industrial look. Would you guys ever think of converting it into 4DX?
@DivineAV Ай бұрын
Thank you so much! That's very nice of you. We actually just did a ton of changes to it. it now has a Trinnov altitude 16 with waveforming, 10 18” subs, black columns with LEDs, acoustic clouds overhead, MadVR, and Kaleidescape. We will do an update soon. Definitely would consider 4DX
@Trying2show Ай бұрын
@@DivineAV oh man Cant wait to see it ! 🙌🏾
@arineey4538 2 ай бұрын
Is it possible some of the blurriness of the Epson was due to the fact that it was paused? Idk if that also pauses the pixel shifting?
@DivineAV 2 ай бұрын
Yes, a bit. But they also enhanced clarity in a software update. Pretty good now
@BigBoob734 2 ай бұрын
I know yo guys are busy just waiting on home theater demo/tour/install video. Thanks
@Morphz_Unlimited 2 ай бұрын
There isn’t a massive difference between these two subs. The spl made more than rated rms while the 1200 made less that stated rms. The spl meter showed the spl 120 was louder which is why you probably cut the vid short. The only thing I gleaned from this is that the spl-120 is still a viable option if you are looking for a Klipsch sub.
@Razalghul71 2 ай бұрын
No chance at all for the Sony
@TheoM-bx3lx 2 ай бұрын
Excellent video video informative and good
@brooklynknightss 2 ай бұрын
I run 3 klipsch RP-280FA L R C my center tower. I lay horizontal!!
@HolzmannMedia 2 ай бұрын
Is there a horizontal masking system for CinemaScope?
@jordansjournal3077 2 ай бұрын
The 504 is more refined than the RC64. Sounds like the crossover is higher on the 504, so slightly less mids coming through the horn. Having said that, there’s more clarity and energy in the 64 - especially on the vocals. And still refined enough to not sound too harsh. It would be a hard choice. I noticed this previously when comparing the old RC or RB line with the newer RP series. Something can possibly be missing when it comes to excitement. Both are forward heavy on the mids and treble, but I like the RC and RB series for some reason. Maybe not as clinical but the clarity on them is out of this world. Especially the second and third generation. Probably can find them way cheaper now too.
@casswood 2 ай бұрын
Wow… the music is horrible and ruins your video. A pox on the cheap-ass catalog writer who shat that out, and you for smearing it all over your running time.
@ozarkguns1 2 ай бұрын
The 1200 is $800 The SPL-120 is $400. I think 2 SPL-120 will sound better than one 1200.
@UnityDenver 3 ай бұрын
Hello! Can you tell me the maximum distance throws on these two projectors? We are replacing a DLP projector in a church. The distance from the projector to the screen is 60 ft. (18.28 m). The image size is 14 fl. (4.2672 m) in a high ambient environment.
@DivineAV 2 ай бұрын
They aren’t bright enough for those specs. I’d recommend a commercial projector with 8000 plus lumens. An ALR screen would be nice. Feel free to reach out. We will help you get the best unit and pricing. Warren Divine Audio Visual [email protected]
@jamesmorss9940 3 ай бұрын
Genelec 8361A SAM
@champion68 3 ай бұрын
Hey guys great video! I’m curious of your opinion on how the RP-500c II compares to like the 504. I’d love to see a comparison I can’t seem to find any comparison videos anywhere!
@DivineAV 3 ай бұрын
Thanks! We will try to see if if we can make some time to do that video. The 504 has a bit fuller mid range. Other than that they sound pretty similar.
@champion68 3 ай бұрын
Thanks for the quick response! In your opinion which would be better paired with RP-5000f IIs? Would the 504 overpower or would the 500 be too little? Thanks!
@DivineAV 3 ай бұрын
@@champion68 the bigger the better. Keep in mind that a speaker is a speaker so the 5000 is huge even when compared to the 504 C. The ideal set up would be three of the same tower speaker, but that’s usually not very practical. Feel free to reach out whenever you’re ready. We have free shipping and can help you with anything you need. Thanks buddy [email protected]
@Axolotl_12345 3 ай бұрын
Nice compare, many thanks
@djmeltdown65 3 ай бұрын
Don't throw it away! Can I buy the amp plate from the spl-120 off of you? I live in Van Alstyne, TX.
@DivineAV 3 ай бұрын
Mine failed. This was a bit of an issue on those particular subs. We generally recommend running that one at around 50% capacity. It tends to live in that range. Klipsch is one of the best companies out there for warranty claims. Reach out to the dealer that you bought it from and have them put in a claim. Sometimes they will take care of it out of warranty if it’s a decent size Klipsch dealer. You can also just modify it and use something like a crown or other amplifier that puts out more power. Drill a hole in the back of it and then silicone it after you make the connections
@scrivs1976 3 ай бұрын
Forgot to mention, the click-bait title is quite unbecoming- “I threw away my subwoofer…”💩
@DivineAV 3 ай бұрын
I didn’t tell you to throw away yours. I’m just serious, I actually threw away my Subwoofer. I put it on the curb. It was rather old lol.
@scrivs1976 3 ай бұрын
Can’t be 100% sure, but the amplifier looks to be identical to that found in the SPL-150, the measurements help n confirming this. The SPL-100/120/150 all share identical PS/Amp PCBs (all three are marked on the board). They just stuff them differently to achieve the rated power per application. Great class D’s- IRS2092 based if I recall correctly 😎 So, same(ish) amp, and larger box. Only real advantage imo is the reduced port chuff. Not at all digging the increase in size/weight for a few hz lower extension/small spl increase. The older models look like even more of a bargain after watching your video. Thanks for the data point🤙
@DivineAV 3 ай бұрын
Yeah, the old subs are really good if you can find a good deal on them. But I can say the amp is definitely different and improved because we had a ton of issues with the previous model. Now Klipsch is amazing and they took care of every single one of them in warranty or not. But the new ones have been absolutely rock solid. And the chuffing reduction is a huge improvement. Thanks for taking the time to comment, great thoughts
@CWCustoms 3 ай бұрын
404c only die to size limitations!
@johncallison4745 3 ай бұрын
Sorry guys these subs are not for me. I do not mean they are horrible they are not but, I still take SVS above them across the board. I can cup SVS should I choose to do so for different room placement, I also feel SVS has more features than these by far and definitely better suit my uses on any of my systems.
@timtim2668 3 ай бұрын
That's Sic! But its so slowww. By the time it fully extends its Time to Upgrade the TVs out of date & no longer the newest model. 😂😂😂
@DivineAV 3 ай бұрын
lol. We can speed it up a little bit, but yeah, it’s a little on the slower side to ensure safety.
@memesmith9700 3 ай бұрын
I have the sony, it's incredible, don't let the bulb put you off. it's got less blue light than the lazer
@jvonengeln 3 ай бұрын
The Epson is actually quite a bit brighter than the Epson, so what gives? The MWAVE comparisons side by side did not make the Epson looked so dim and they were both calibrated too. Epson is rated at 2700 lumens. Sony at 2000 lumens. Yet Sony looks way brighter than the Epson in this side by side?
@DivineAV 3 ай бұрын
These units were both to 75% laser output. If you turn them up to 100% Epson is slightly brighter. Also with software updates, it’s significantly sharper now. Stay tuned to the channel because we have another Epson video coming out very soon. Thanks for watching.
@Svante Ай бұрын
When is the new Epson video coming out?
@adelekeadeniyi1706 3 ай бұрын
Nice
@Svante 4 ай бұрын
Was the Epson updated with the firmware, that massively improved the pixel shifting?
@DivineAV 4 ай бұрын
It was running the current software at the time of the video. It’s possible that the software came out shortly after that. We’ve sold a bunch of them and I can tell you that they are great projectors. The Sony is definitely a bit sharper, but the feature set on the Epson is unparalleled. Especially with our curved screens, the geometry correction is fantastic. Thanks for watching.
@vishnuramia2140 4 ай бұрын
So in the prewired part. How do you install the speaker. Wouldn’t the stud get in the way of the speaker clap? The clamps on the speaker are supposed to grab on to drywall right? How do we get around the side that is next to stud?
@DivineAV 4 ай бұрын
Drill a very small pilot hole through the clip and run a screw straight into the stud. Very simple procedure and doesn’t damage the clip. Thanks for watching.
@SlaviDavi 4 ай бұрын
Damn just blew my computer speakers.
@TheNLHAZE 4 ай бұрын
May I please ask what subs do you guy's have thanks in advance..😊
@jamesreese7111 4 ай бұрын
I want a RC-64iii, but I have it's little brother the RC-62ii I love it! Have you guy's ever heard one? I got my RC-62ii for $350 in 2015. Is the RC-64iii ported? My RC-62ii has 2 front ports. It delivers pretty impressive bass for a center channel speaker.
@ElCidPhysics90 4 ай бұрын
Would the JVC be adequate for a 170'', 2.4:1, AT screen at 20' away
@DivineAV 4 ай бұрын
Hey my friend, thanks for watching. The Jvc will most likely throw the image, but I wouldn’t expect more than about 150 nits with that combination. I’d recommend a brighter projector. if you’d like us to consult with you, send us an email and we can do some calculations to advise on the best set up. We also provide the best pricing. Thank you very much. [email protected]
@MCK888 5 ай бұрын
JVC ❤️
@ilovehughjanus69 5 ай бұрын
Guys, I’m currently rocking a baby set up but want to expand and build up. I am GREEN, very new at this and have little knowledge. I have a Sony STR DH-590 and 2 KEF Q350 Bookshelf speakers paired with a Klipsch R-100SW. I was going to add a couple KEF Q series floor speakers - probably the 6.5”. I found the RP-1400 on a massive discount and am debating on pulling the trigger. Would I need a new receiver to run that?
@DivineAV 5 ай бұрын
Hey buddy, thanks for reaching out. You have to start somewhere. KEF makes good stuff. 1400 is a massive box. Do you have space for it? It is a great sub but we would want to analyze the space and ensure it's the correct choice. Are you in the states, if so, we match all authorized dealers and can give you proper advice on the space. Let me know. Thanks
@ilovehughjanus69 5 ай бұрын
@@DivineAV it’s definitely a beefy sucker, that’s why I thought it might be overkill but I wasn’t sure. It was going to be in my living room, which is 14’ deep (couch wall to tv wall) x 16’ wide with 16-20 vaulted ceilings. Unfortunately one entire wall is made of windows which isn’t the most desirable, it’s on the opposite side of the room from the tv and current speakers . I am in the states though - Ahwatukee, Arizona.
@oofy_-vi7zj 5 ай бұрын
TURN DOWN 4 WATTS 🗣️🗣️🔥🔥💪💪🗿🗿💯💯🙏😭😭
@plasmarenegade 5 ай бұрын
very nice
@jorgenavas6704 5 ай бұрын
Hello! how are they? I have a 16 m2 living room and an integrated amplifier, I want to watch movies, CDs, streaming music. What combination do you recommend for the living room? Klipsch rp600 mkii or Klipsch rp500 mkii with a subwoofer? I saw several and I would like your recommendation if you don't mind and you are so kind . Klipsch RP-1000SW, Klipsch SPL-100 or Klipsch R-100SW? a cordial greeting from Argentina!
@DivineAV 5 ай бұрын
hey my friend, thank you very much for reaching out. For your room, I would definitely recommend the RP 600s and 1000 SW. If budget constraints, the SPL 100 or 120 can be found at some sources. their performance is still very good but I recommend running them at around 50% gain otherwise you could experience some long-term amplification failure. The 1000sw has a five-year warranty instead of two and is a more reliable unit plus doesn’t suffer from chuffing noise. RP 500 is a bit small for the space. Thank you so much for your support!
@jorgenavas6704 5 ай бұрын
@@DivineAVThank you very kind!
@konradbak 5 ай бұрын
I dont have enough place for RP-1000SW, will SPL-120 be good enough to pair with RP-6000F II?
@zaidiyoucef6916 5 ай бұрын
JVC
@mwrightinsurance 5 ай бұрын
I’m curious why they put dipoles on the rear wall rather than the side walls? It’s just not typical, and I would like to hear Klipsch’s reasoning.
@DivineAV 5 ай бұрын
Cornering out dipoles is kind of a trick that is used when the seats are too close to the back wall, but that room has changed now. We deleted the back row and added Klipsch Rf7iii as rears. Dual 18s in the back and 8 18s in the front. Trinnov Waveforming. It’s on another level. We will do an update soon. thanks for watching buddy
@jeff-w 5 ай бұрын
Welp, I'm sold. Can you get one to Canada?