How to Install ATV Seat Cover ~ Perfect Fit Every Time!

[@TK-uk2yy]

"Ok Dad, whatcha talkin bout dad"... priceless! That is awesome!

[@paulstoolbox]

You are a Pro my friend but your little helper is the Bomb!😂

[@RaztechPowersports]

Hahaha thanks and he makes filming quite interesting 😂

[@wifie9321]

Thank you. I need to wrap a couple seats pretty soon. Getting my machines ready for the summer.

[@the_hate_inside1085]

You´ve got this backwards, it is now during spring you get your machines ready for next winter...

[@waynegambrell7095]

Like the video. I like the fiberfill overlay for the worn cushion. I got a 81Honda 185s atc 3 wheeler seat to do and the seat foam is worn so I will use the fiberfill to cover my foam.Good video.

[@RaztechPowersports]

Yeah I’ve used this trick many times and I’ve always had good results

[@colttefft7654]

😊

[@michaeljl87]

Looks so much better. Awesome walk thru.

[@RaztechPowersports]

Thanks and yeah it always makes a huge difference!

[@grubb910]

Would it not also be a good idea to apply some adhesive to the inside of the seat pan, beneath the staples, to secure the cover and take some load off of the staples? Just a thought...

[@matthew-8674]

Great video, as an FYI: The 125M ATC 3 wheeler DID have reverse!!! I used to have one (86). It was on the brake lever. Small red button, downshift from N.

[@Alwayswatchin2534]

Nevermind I read the description. Awesome job I might ad

[@FullDrawOutdoors]

Man I went to try this and the staple gun wouldn’t shoot the staple through the plastic on the seat, would get it in like 1/8 of an inch and fall out. Do I need to get an air compressed staple gun?

[@JaredRMorgan]

My mom would love if you did this to her dining room set. 😂 Cheers! Grant commentary is excellent, btw.

[@RaztechPowersports]

Unfortunately I have recovered dining room chairs as well lol. Grant makes filming very “interesting”... like the lawnmower scene?

[@JaredRMorgan]

I was pissed off for you. I think you should get the Lav mic next.

[@RaztechPowersports]

@@JaredRMorgan and that lawnmower was across the street ☠️

[@JaredRMorgan]

Lav mic wouldn’t have heard it. Someone was leaf blowing in my last video while I was talking.

[@RaztechPowersports]

@@JaredRMorgan oh that’s awesome 🤘🏻

[@robertreece7824]

This guy is awesome...can't wait to do mine now!

[@RaztechPowersports]

Thank you sir and goodluck 👍🏻

[@Kookamungawerewolf]

You have a good advisor there.😃

[@RaztechPowersports]

He’s a wealth of knowledge 😂

[@Alwayswatchin2534]

What size staples?

[@shadowcali559]

Great video I got my first project bike and now I know I don't gotta buy a new seat lol I'll replace the cover

[@RaztechPowersports]

Exactly and thanks for watching 👍🏻

[@jeepvolks]

Just watched your video and it was very informative. I’ve never done a seat, but just received a new cover for my Big Red. I’ll definitely opt for the batting material as I feel it will help with some of the foam imperfections. Much appreciated brother!

[@dtraider28]

Can u show which direction you overlap the rear corners so that there isn't an ugly foldover on those corners

[@Itsamekatrina]

Great video, ty. Just trying to figure out which seat cover to purchase. Working on my 1995 Warrior 350. Restoring and upgrading to keep up with son's new Yamaha YFZ 450R SPECIAL EDITION, lol

[@RaztechPowersports]

I’ve had good luck with buying seat covers on eBay. That’s a great Atv for your son. Keep him off that 450 🚀😂

[@SoCal_]

Does this stapler go through the seat tray plastic pretty good?

[@RaztechPowersports]

With ease

[@Truckman1980]

Great job

[@phifeeightten5760]

Great video! what name brand did you buy on Ebay? I bought one and it does not stretch at all. Thank you

[@RaztechPowersports]

Thanks and unfortunately there is no branding on it. Most of the seat covers stretch well tho. Surprised yours doesn’t

[@jasongiles1038]

Use a heat gun and it will stretch. Don’t get it too hot because it will melt it! Just heat the material and it will stretch nicely for you. If you recall at the beginning of the video, He had his seat cover laying in the bed of his truck and it was a hot summer day ? He was heating up the seat cover for easier stretching. Please use caution with heat gun! ⚠️ Hope this helps! 🤙

[@benderoutdoors2554]

I am trying to redo a Polaris, but I can not get the fabric to stop lifting where the seat curves from the front, would you recommend adhesive spray? My fabric is pretty tough and slip resistant doesn’t stretch the best.

[@RaztechPowersports]

Warm it up and stretch it really tight on the left and right side (towards the front)

[@jose22ca18]

What's the name of spray that you used?

[@Cjizzle83]

What is the name of the cushion material exactly and where can I get it ?

[@maxkelter3561]

Great to do things yourself when possible - tnx.

[@RaztechPowersports]

Indeed! Always rewarding seeing the finished product

[@rebeccaleif874]

Great job!

[@the_ltz_guymaster7912]

It’s honestly easier in the long run to remove all the foam yourself and have it redone at a shop and have them do the seat cover like 175$ tops is what it cost my old cr500 for a new job because seat was worn and hurt my ass

[@RaztechPowersports]

Finding someone to reshape the foam correctly is pretty tough in today’s times

[@the_ltz_guymaster7912]

U just take it to a upholstery store

[@RaztechPowersports]

@@the_ltz_guymaster7912 I’ve yet to find a good local shop 🤦🏻‍♂️

[@darryldoesit966]

thanks for the help....

[@amyingli253]

Great video! What’s the name and size of the poly foam?

[@RaztechPowersports]

Thanks! I’m not sure But I think most craft stores have it in stock

[@BigIrisProductions]

Very helpful, thank you

[@RaztechPowersports]

Glad it helped 👍🏻

[@john4x532]

How did you get the back corners smooth like that

[@RaztechPowersports]

It takes some practice, but just pull the material around the corner a little bit at a time and staple it. Plenty of staples

[@skateboardtowel]

What length staple did you use?

[@RaztechPowersports]

Usually 3/8

[@TheClassicPaul]

Hey man whats the white material called?

[@RaztechPowersports]

Polyfill

[@miguelgarcia-vg1fh]

Is the foam required? Or I can I just take the cover off and replace it

[@RaztechPowersports]

If your foam is in good shape then you can just replace the seat cover 👍🏻

[@miguelgarcia-vg1fh]

@@RaztechPowersports thank you for the fast reply

[@RaztechPowersports]

@@miguelgarcia-vg1fh no problem and good luck on projects 🛠

[@barrybenson3759]

How thick is the poly foam material?

[@RaztechPowersports]

About 1”

[@georgesalayka8281]

Are you using poly-fill or poly-foam?

[@RaztechPowersports]

99% sure poly fill was the name of the material

[@gwp1ohio]

I can't get my staple in without bending... won't drive through

[@RaztechPowersports]

Yeah, it can be a pain sometimes. Make sure you’re holding pressure behind the plastic, so it cannot flex.

[@AMSRMX16]

I tried to do this with with the exact same staple gun as you on a 1990 CR500...the staples just don't penetrate the plastic..they go in maybe 1mm. I used 6mm staples. Cant find any issue with the gun.

[@RaztechPowersports]

You have to hold the staple gun very firmly. Any loss of energy will allow the staple to not penetrate the plastic

[@AMSRMX16]

@@RaztechPowersports thanks for the answer! I’ll try.. I’m also going to to try the staples with the sharp deviated point. I’ll post back.

[@GermanShepherd1983]

Why can't the old cover remain in place? Removing a couple hundred staples is a lot of work and seems unnecessary. Otherwise, very good video.

[@RaztechPowersports]

If you use the poly fill you might be able to leave the old cover but I’d rather just do it the right way the first time. More work but the end result is always great

[@bigrod0069]

👍👍

[@darrellsomers5427]

Kids are great leave them in the video

[@RaztechPowersports]

Haha thanks man. Yeah it’s a little more stressful but I’m sure I’ll appreciate see him in the videos as the years pass by.

[@DonCraig-lw8zy]

Seat