HOW TO Install Cooler Master Hyper 212 RGB Black Edition on AM4

[@GearSeekers]

2023 UPDATED HYPER 212 GUIDE: kzbin.info/www/bejne/b2i5pWVretWFjs0

[@ezbreezy5354]

Hello.. what if there are 2 fans.. do you have a tutorial on how to connect them?

[@Thx1138sober]

Amazon just dropped mine off about 20 minutes ago. I'm watching this video before I shut down and install. Currently, Ryzen 5 2600 (no OC) idle temps is 40C and max temp under 100% load is 83C with an ambient room temp of 70F (21C) with AMD Stealth Cooler. After install: Idle temps are 27C-28C, 30 minutes of 100% load cpu stress test (the one in cpuz) max temp was 59C. Update: After overclocking the Ryzen 5 2600 to 4GHz, Idle temp is 30C (room temp 21C) cpuz stress test 100% load for 1 hour Max temp was 66C. My system is installed in a Phanteks P350x case with 5 UpHere RBG case fans running at 1100rpm, the sound meter on my phone says the system is running at an average sound level of 34 to 42dB right on top next to the fan, two feet away from the tower the noise level only reads 10-14dB, so the system is reasonably quiet.

[@BenIsAliveYT]

My idle temps for the stock amd r7 1700 oc to 3.7 is 45

[@raghavbatra12345]

thanks br i have same configs , except my ambient temperature is 25-30 and yea even my 2600 is toucing 83 sometimes , how does this fit in p350x ??does door closes properly??

[@Thx1138sober]

@@raghavbatra12345 The hyper 212 BE fits in the Phanteks P350x with about 5mm to spare. No problem attaching the glass panel.

[@SakaraskiHD]

Thanks! that's the same temp I got with stock fan and this helped my decision.

[@TTGamingTrinh]

Man i was about to ask a question like this. I have the 3700x running with the wraith prism. My idle temp is 45c. I might cop this and install

[@crispdonkey2222]

I always find that installing the cooler is the most stressful part of the whole build lol

[@MrEnvoy05]

Lol. I was considering a liquid cooler for my oc’d Ryzen 5, but I think this’ll do just fine

[@doomer1905]

@@MrEnvoy05 Fuck liquid coolers bro, they click and make dumb noises. I’m swapping mine out for the 212.

[@boombap8007]

Facts

[@ectasylover]

so true

[@xesnox6122]

@@doomer1905 lol

[@Gause10022]

First time pc build on my own, and definitely first time doing an air cooler vs a water cooler. Very helpful and well explained!

[@hazzzed6368]

He’s dogshit at explaining wtf 😂

[@Kyubeyaz]

@@hazzzed6368 he was very straightforward with what he was saying, I would love for you to do a video of explaining and post it.

[@hazzzed6368]

initial 22 if I did it I would go over everything from showing angles better and giving in description how to

[@luke-hv6mp]

@@hazzzed6368 nothing was wrong with the video. i think your tiny brain just has a hard time comprehending it man

[@shaunhal1936]

@@hazzzed6368 make a video then ? lmao

[@RockMore]

5:39 before applying thermal compound and removing the protective cover, make sure to check if the screws align correctly. You may need to pull the springy screws back to move them in another position with this modular CPU cooler.

[@chingchenghanjigrandpa1977]

it still doesnt work

[@pppoopoo1811]

@@chingchenghanjigrandpa1977 yea same for me I’m able to get opposite sides screwed on but the other 2 are so far off that it doesn’t matter what hole the screws in it’s still really far off did u ever fix this or find out if this is a bad thing

[@chingchenghanjigrandpa1977]

@@pppoopoo1811 i just left it tilted lol but i dont recomend doing what i did

[@ForceEdge47]

@@pppoopoo1811 Did you ever get this to work? My screws won’t align for the life of me and eventually I gave up and went with stock but I do want to give it another shot.

[@vartasy]

i thought i was the only one i got am4 socket but its still so far off

[@one2tap681]

+1 highly recommended, found this video while trying to help a buddy build his first PC over discord. no bullshit, straight to the information without any unnecessary extraneous info. super easy to follow, from my buddy who's new to PCs to me, who's built several. Cheers mate!

[@nizotlthehealer4866]

doing the same thing lmao

[@mjbskydigital]

This helped a lot when I was building my first PC the other day. Mounted to a B450 Tomahawk Max. At first the RGB wouldn't work. Turned out I had put the 4pin connector onto the RGB header the wrong way around. For any newbies (like me) out there, make sure the little embossed arrow on the 4pin connector is lined up with the 12V pin on the motherboard.

[@mjbskydigital]

@@_szo No problems so far. All solid for me.

[@andresa1959]

Man I love you for this comment no homo, you saved me from taking off my PSU and connect an unnecessary cable, if case someone has the problem with a MSI b550 tomahawk, the fan's RGB connector has a little triangle, and you have to mach it with the RGB 4 pin header's white square!!! Mine was on the left of the 4 pins

[@mfelipetc]

Thanks, helped a lot, it`s easier than I first thought. The worst part was removing the stock cooler, the thermal paste became a glue (and I was using if for less than 2 months). If any of you have the same problem, twist the cooler instead of just pulling it off. I'm using a stock R5 3600, temperatures dropped from 85 to 70 (full load, stabilized after 15min)

[@joegordon7580]

try not to twist the cooler could accidently bend some pins

[@mr.byebye941]

Holy crap, i watched 3 videos, like 5 times each, read the manual a million times, but then i found this. God, my pc is almost done (looking for 3060 ti) but still, turned on the pc to see the rgb, and wow, my build look complete, and all thx to you!

[@viduranisal]

Just found your channel while searching for Hyper 212 RGB, really good content, camera work and presentation! You deserve more subs! Not sure why KZbin has never put your videos in recommendations when most my subs are tech channels

[@GearSeekers]

KZbin hates us lol.

[@jackbutler3659]

For anyone wondering about the cooler screws not going in don’t be afraid to put pressure on it like I put a good bit especially on the side with the first screw and temps so far are all good and cpu isn’t broken so ya don’t be afraid to put pressure and maybe practice without thermal paste on first that’s what I did and it helped a lot

[@whatshisname2497]

Seriously I'm kind of worrying myself because it felt like it was "crushing" my CPU. Am I ocd'ing it? It booted fine.

[@hjackson.92]

Thanks! I'm using this cooler for an FX-8370, and I can confirm that the instructions work for the AM3/AM3+ platform as well. (The video clarified a couple of ambiguities that were in the user manual.)

[@juansalvetti552]

Is the old version compatible with AM4?

[@RogerioDuarte]

@@juansalvetti552 unfortunately not

[@AdrianD2k22]

I bought this cooler few days ago and i'm proud of it .Besides AMD Wraith spire temperatures dropped with 10-15 degrees.Thx alot for this amazing review.

[@jamessinclair6829]

I'm sorry, it wasn't clear in the video.....Does this have RGB?

[@GearSeekers]

Nah sorry. No RGB. Seriously though I showed how to hook up the RGB, it's in the video title and I also state that it's RGB.

[@jamessinclair6829]

good on ya cobba

[@Daemon1995_]

@@jamessinclair6829 it also says rgb on the box

[@lunchie80]

The fact the fan changes colour is just video editing. It is actually only black. The RGB in the title, product description AND model number just stands for Really Good Blower. Also please don't breed due to your incredible lack of intelligence.

[@Jacob-fo4nq]

r/ wooosh

[@makaveli2tt]

1:35 to 2:10 answered all the things I wanted to know 😁 subscribed

[@pleox42]

Great installation guide. 10/10. Few years ago I installed a hyper 212 and it took me over 2 hours and was very frustrating, although it was my very first build and I was a novice. This video was a great refresher, and I had it mounted in not even 20 minutes or so. Subbed. Ty bro.

[@ConradKo]

Hyper 212 is notorious for installation difficulty. Normal coolers should take 2 minutes

[@Rosa-cr7qc]

screwing in the screws to the mounts takes like 1 hour

[@GearSeekers]

That's because Squid don't have hands

[@oeuf1280]

@@GearSeekers but there are 4 of them?

[@crypticchaos5296]

SquidTree how the fuck is it even possible

[@DVRKSIDE_]

@@crypticchaos5296 you really gotta push hard dude - i thought i was gonna break my cpu when installing but just send it - it works great

[@LukeL1234]

Allan Cameron try hard took me up 2 hours and how do I work the rgb like where the fuck do I plug it in I don’t have a rgb header so where do I plug it in

[@lowporosity]

The thing I love about this channel is the presentation and composition of everything, the personality, and the fact that you cover alllll the ground for questions, do multiple guides, and are thorough. New favorite PC and tech channel.

[@Sicknesss]

Thx buddy, haven't built a computer in 7 years and the included paper instruction booklet with this cooler is worse than ikea. Video was simple and informative to follow

[@nomilk32]

Stopping by and showing some love from the UK!! I Used to own one of these coolers. I was shocked by the overclocking potential for a cheap Cooler. It Looks great now they've updated the look with RGB lights and the black paint job!!

[@drown4994]

Had an existential crisis trying to replace this cooler with my stock 2700x cooler but it was worth it. Went from 40-45 idle to 28-32 idle.

[@schuylerprofitt5535]

Bro same the stock thermal paste like glued itself to the cooler and the cpu I thought I was gonna break my pins

[@MigsRx]

1:30 perfect! Thank you!

[@lecoque88]

Watching this in 2022. Thank you for the quality content, very helpful 👌🏻

[@threeagainstfour]

Thanks for this, I just got the Hyper 212 black edition. Assuming I can use this guide as well once it arrives!

[@christopheroconnor4665]

Just put this on my R5 3600! Thanks for the help man! Really appreciate it!

[@christopheroconnor4665]

@ole faber I was getting in the 60's before now the 40's. Much better temperatures with this Hyper 212 more than recommend it

[@himathyjenkins]

@@christopheroconnor4665 will this fit in a mid atx case? I have a ryzen 5 3600 aswell

[@yaaaboiflexi7114]

Thank you so very much. This worked for the Cooler Master hyper 212 black edition on a AMD4

[@MegaTolp]

The intro is like: "don't bother me with your silly questions" ...

[@aspynoakes2267]

Building my first build in a couple of weeks. I picked this puppy up and I'm super excited. Thanks for install vid!

[@lxiizz3186]

big thank you, too easy assembly with your video. But I didn't understand why the rgb wasn't working so I came back to your video and so I realize that I put the cable on a 3 pin port on my motherboard when you have to put it on a 4 pin and this is not mentioned in the small notice. Thanks again 😄

[@TheSparky1942]

Great, simple, straight to the point video. You just earned a sub!

[@UnluckyDomino]

Just put mine in, took about 15 minutes but it was well worth it. Much more quiet over the stock AMD wraith stealth. Also getting 25c idle on cold boot and havent seen over 50c in games!!! Planning to overclock my ryzen 2600 to 4.1ghz with this cooler At the time of writing this, it is winter here in the UK and I would the ambient temperature is around 15c-20c I also added a noctua fan as an exhaust for the case, which I think may have made a slight different in temperature too

[@jwaye89]

It looks heaps better than the original. Good video and instructions are clear

[@GearSeekers]

Thanks fams!

[@east9876]

Love your "inevitable questions" section. Knew 5/6 of the answers but the 1 was exactly what I was wondering. Thank you! Great video

[@franciscoferrandiz5501]

Nice video. Straight to the point.

[@vaun7109]

Why don't you have more Subscribers is beyond me. This was by far the best explanation one could ask for. I ordered same cooler immedietly after watching this. Good job mate. Very nicely explained. Keep it up.

[@relyesss]

Subbed. Idk if it was just me but I had so much confusion with the manual that cooler master provided with this cooler but you really helped out in the easiest and most effective way possible. Definitely going to check some of your other content out. Thanks.

[@ChiefAaron95]

Yeah same with me hahah was like fuck this and used stock, but changing that today

[@matt-be8lc]

included instructions were so bad they had the wrong screw pictured in the booklet. this made it much easier!

[@conorf8091]

Pretty sure that’s the reason I put the book down and searched this vid. Very first screw on page 1?! Good video

[@Tenaciousdomi]

Literally answered my question in 30 seconds within the first two minutes. Fuckin legend.

[@Asmirasmir420]

This video really helped me, because you explained if there is an added thing for the am4 socked and if there is an added controller for the rgb. thanks, you deserve my like.

[@yacky.r]

I could install it thanks to this tutorial it and it’s working perfectly, thank youu

[@pumpkeenix]

I was worried when I saw the parts.. But because of this walk through, I successfully installed my aircooler easily.. Thank you!

[@KaegosWHM]

Random flying insect @ 2:00 is my hero. Also thanks for delivering on more air cooling perspectives!

[@GearSeekers]

My homie fly guy

[@powerfulrisewithlogan7049]

1:50

[@Obelus_OG]

“Here’s all the materials we need to install this. Now connect these brackets with a screw I haven’t mentioned” 😂😂 Thanks man, I’ve used this guide each time I’ve installed one of these just to be sure

[@TheBinklemNetwork]

JUST FOUND YOUR CHANNEL, NICE MAN!

[@GearSeekers]

You're nice

[@heavydremer8716]

I got the regular evo 212 and I'm kicking myself, because the price is the same on Amazon right now xD Great video! All of the other installations videos were frustrating to watch, especially when trying to install the bottom bracket. such a clean channel!!!

[@rektful]

How hard do you have to push down when screwing @ 5:48 ? I am paranoid that I will create enough pressure that can damage the CPU.

[@morganseche2268]

you know it’s installed correctly once the screws wont screw further

[@CostcoDunkin]

Just enough to get it threaded. Put slight pressure on top so it doesn't rock like it did in the video. Have you put on a stock cooler before? It was nearly identical to putting the stock cooler on the 3600. Only thing you DO NOT want to do is lift up on it to check. That paste might cause them to stick together a little and it will pull the CPU up and it will NOT go back in perfectly, ruining your CPU AND MoBo pins.

[@paullawson8550]

just bought this cooler and a new ryzen 9 3950x ... put it all together as shown and i'm shitting it about screwing it down.. this video will help me to get it installed tomorrow. thanks

[@The93Momo93]

how did your thermals turn out?

[@paullawson8550]

@@The93Momo93 hi, its running nicely, its built in a sahara tower case that has ten cooling fans. idle temp is 35, sustained full load is 70 - 75

[@The93Momo93]

@@paullawson8550 hey, thanks for the reply! those are pretty nice temps, I will run this with only 3 case fans (possibly with a 5800x) but if it ends up not enough I will probably slap a second silencio fan on the heatsink and see how that goes first, but in theory it should be fine

[@paullawson8550]

@@The93Momo93 i think you'll probably get similar temps as me depending on airflow. seems good ventilation pays a key part. let me know how you get along

[@The93Momo93]

@@paullawson8550 thanks, I'll give a heads up when I got it :)

[@ruinfox4108]

Absolutely amazing tutorial, very clear steps. Perfect. 11/10

[@stellargravitywell1828]

This was extremely helpful. I spent far longer than I should have trying to figure out where to put the RGB header (and if I even needed the controller, which I don't). Thank you!

[@joshuayangg]

How do you control the lighting effects?

[@IINSPIR3DD]

software

[@Praby]

@@IINSPIR3DD no you get a remote

[@Praby]

@@IINSPIR3DD its hard to setup tho

[@scrambleegg9743]

@@IINSPIR3DD what type of software

[@IINSPIR3DD]

@@scrambleegg9743 depends on whats your equipment. Search your component (name) lighting control and you will find the correct program to control the colors

[@jellybeenz]

5:30 If the screws aren't aligning for you (like they weren't even remotely close for me), you've installrd the bar on the cooler itself the wrong way round. Unscrew the two small screws, flip both sides round and you'll be good to go :)

[@lukazlkz]

I would like to put an extra fan in the back, which one you guys recommend? Air pressure or Air flow? Thx!

[@rifzzz5948]

Flow

[@Tredwayj]

Thanks for this video. The hardest part was attaching mounting the heat sink. I had the plates backwards at first and then it was just a little difficult to line up the screws but I was doing a swap and didn’t remove the mobo. Anyhow it all worked out and not running 20c cooler under load with this thing. Thanks again. Subscribed. Cheers!

[@SarkarMotion]

Classic mounting style, made me nostalgic about my OCZ tower for 775. Excellent videography, you made a stack of aluminum fins look good.

[@hoodedfarmer]

You know I actually wasn't looking for a video on this and KZbin recommended you to me and I'm actually glad that for once KZbin recommended somebody that could probably help me and take away some of my concerns on the PC builed that I'm doing. And so far only the insulation question was answered but I'm pretty sure there's other videos that I can look at you may have that will answer the rest.

[@Traumalance]

Only issues im having with this coolar are A. One mounting screw, no matter how evenly I tighten, always sits crooked. And B. Mounting the board back into the case with the cooler attached is a pain in the ass

[@lawoftheuniverse8089]

Thank You Guys !!! You made a potentially confusing install very straight forward although I still managed to miss a step or two and its chilling my Ryzon 5 3600 just fine...You have a new Subscriber...

[@mustspeakmillkaman9671]

Is it important that the R's on the Cooler Master Logo on top are pointing towards the Ram or is the direction in which the tower is placed irrelevant?

[@anthonyferreira4125]

I actually have one like this and I put it in ryzen 5 processor and I have no complain about it. Absolutely great design good temps.

[@linkenparis9562]

helped me a lot, very clear instructions ty :)

[@fjdkfdfjdf33]

this works with AM5 too. I didn't realize that the RGB needs to be using the 4 pin 12v header. Had it connected to a 3 pin 5v port and wondered why it didn't work.

[@FitriFini]

thanks for the guide..i thought i was too rough when tried to screw them..

[@tylerdewland2660]

I can’t get the cooler to line up with the brackets lol. The brackets screw into the motherboard no problem when not attached to the cooler, but When I attach the bracket to the cooler it’s not wide enough to fit the motherboard

[@frankst.claire8052]

Excellent video! Clear and concise. Glad I found it after puzzling over the inadequate (for me, at least) “picture” instructions in the box. And the one question answered below on the additional backplate found on my motherboard. Just subscribed!❤️

[@avadhootnerurkar2630]

Already have a AMD Ryzen 5600g with stock cooler and also having VENGEANCE® RGB RS 32GB (4 x 8GB) DDR4 DRAM. Will This cooler fit with the RAM modules already installed. I have a MSI B450M PRO-VDH MAX motherboard

[@senorskellig9131]

How you change the color without the controller because I’m tryna figure out why my lights not working after it was

[@elijahwynkoop1782]

I'm currently having the same issue, if you find a solution I'd love for you too share it with me

[@senorskellig9131]

Elijah Wynkoop if you talking about the led going off it’s because it’s put in backward into the rgb header. You gotta have the arrow on it facing the other side.

[@ryanstechandhardware]

@@senorskellig9131 This worked. Thanks!

[@senorskellig9131]

Ryan's Tech & Hardware that’s great 😁

[@DarkM4V]

Not gonna lie, came here just to know if you need the RGB controller lol. Glad you said it upfront! First PC build so very new to some of it and this video helped, thanks!

[@eddiegarcia2556]

If you hook the RGB to the motherboard how to you use the hook up the get the RBG to work?

[@dylanlawery]

Use some sort of software on your OS to control the RGB

[@kivix3837]

So if you hook up your cooler to the motherboard u can literally control the lights and modes on the software?

[@batman.darthmaul]

I got the non-RGB version of this. This is a really handsome set up, all black metal. I noticed your fan cable is nicer than mine. Mine is just a standard ribbon-style cable while yours has a nice, braided sleeve.

[@MonteiroCoutinho]

Congratulations for the video, it helped me a lot!

[@alisonurtezuela]

Lol Epic intro when you throw the box. I think it's funny. Anyway I will be picking mine in the next few days for my Ryzen 5 3600xt. Thanks for the video.

[@bitronicc1887]

Very nice video production quality

[@DTD2212]

If the screws don't align with the bracket you can pull them up and move them to a different hole (There are two holes). One screw was misaligned and didn't fit on mine but that did it ^

[@xXNunduXx]

Hearing him go through the list of questions in a “kill me now” voice is hilarious!

[@klfjoat]

FYI, it *IS* possible for a slight person to over-tighten the nuts and lock them into the studs, causing the studs to just spin against the backplate.

[@kainoaa6397]

I watched this vid multiple times. You've convinced me to buy it. Oops

[@jaywhite1850]

Using this on my first build (which is mostly Cooler Master products). I’m switching out the fan with one of their argb 3-pin chassis fans because my mobo has no argb headers and I want all my leds synced through a single controller.

[@emilymarie173]

Is there a software that I download to control the rgb on the fan if I connected it to my motherboard? Like how do I change the colors without the remote?

[@bman-kw2xj]

Did u figure it out I need it too

[@DarkM4V]

@@bman-kw2xj This depends on the type of motherboard. Each company has its own software to control RGB connected to the motherboard. I've got an MSI B550 and it uses MSI Dragon Center with Mystic Light to control RGB.

[@Evan-tt5kk]

You said twoard the end (and it says in the directions) to remove the fan will mounting and then reattach it. How is this done? I don't see screws.

[@GearSeekers]

It has clips on the fan bracket to remove the fans and underneath the rubber insulators there are fan screws

[@ramonjose3090]

awesome video as always

[@GearSeekers]

Thanks so much!

[@OKBentley]

Thank you for helping me with my problem! I had the straight brackets on backwards! I'm so dumb!

[@samuraishinobi]

Is there a software that you can download to control the lights other then using the controller?

[@BerkinParlakay]

samuraishinobi i’ve heard people mention Asus Aura but i haven’t checked if the program is cross-compatible with non-asus products

[@OhhShiznits]

What I rinse it with again didn't catch that distilled water or dirty water?

[@asomeluigi1]

5:05 this statement caused me to break 3 of the 4 bolts. Thanks.

[@damienrahul80085]

even I noticed, sadly you won't have replacement screws either

[@damienrahul80085]

@@nims5145 damn man be careful the next time

[@24321619]

That's right nothing I see that would prevent over tighting, they be be something like that on the four heat sink screws, that have some sort of spring set up, still would not trust that all that much.

[@scrambleegg9743]

HAHAHAHA

[@voie3]

I bought it off Newegg and it came with 3x of the correct screws for the socket and 1x of a shorter version... having a real pain getting the last screw to finish my new pc.

[@m8x425]

oh did Cooler Master short you on the 4th screw...... what a surprise! Throughout the years I've bought more than several Cooler Master coolers and a few of them didn't come with all of the mounting hardware. Amazon for instance will take the entire cooler back, no questions asked. I don't have this problem with other companies.

[@Jadynelsworthy]

First video I’ve seen on your channel, i enjoyed it you really covered everything in good detail. I also loved the slow mo showcase of the cooler at the end and loved the added contrast. Good stuff mate

[@GearSeekers]

Glad you enjoyed it!

[@michaelwatson6229]

Thanks you made it look so easy the included instructions were lacking very much so. Thanks again

[@xxalphagamingxx3509]

Bro I am sure you will get 100k subscribers in this year👍

[@GearSeekers]

Let's do it together!

[@zikugo]

when did you explain how to get the fan off

[@shawnferrari1533]

I dont think I have a 4 pin connection for the rgb on my board.. what exactly is my step again? that connector goes where?

[@danilopassos1565]

this RGB is a 12V 4pin plug, do you NOT instal this in a ARGB 5V 3pin!!!!

[@shawnferrari1533]

@@danilopassos1565 thanks have a whole new desktop now lol

[@10cboi63]

What is the ram clearance? Does the 1st slot is blocked by the fan cooler? thanks is advance!

[@rah.33m]

Me: Damn everything is so expensive Gear Seekers: *has shelves full of parts* and tosses cooler...

[@waldolemmer]

The box is empty, you uncultured swine

[@RS250Squid]

I'm glad this thing comes with a little RGB controler. I built a new rig 6 months ago and I'm rebuilding my old one in a new case to kinda refresh it (the old cooler - a 120mm aio - died so I needed a new cooler too). The mobo is old enough that it doesn't have any ARGB headers, so the controller is handy. The 4 pin molex though is... not. :D

[@GoogIe_sheets]

Anyone else having extreme trouble trying to screw in the cooler to the motherboard, the screws on the cooler simply do not reach far enough

[@GiuliaNisacutepuppy]

Just finished my build yesterday- you have to put a LOT of pressure on the screws and really push down to bend the springs surrounding the screws.

[@lildiegoenthusiast]

You gotta put pressure on it, a lot in order for the screws to reach

[@hyperion9131]

What do I do with the black sticky tabs ?

[@Ozzyboy99]

Hello Mr Gear Seeker will this cooler fit my b550m AM4 motherboard 😊

[@elcrunchero3604]

Bruh this shit took me forever! And it was worth it!

[@dan3a]

It took me 3 hours

[@rtxskillz6006]

@@dan3a 💀

[@j.lietka9406]

So it does come with thermal paste! Picked up the 212 (non rgb) today! Thanks

[@rtxskillz6006]

yes

[@MrFreekyJ]

ok ok, i've subbed... support a fellow Aussie!!

[@likewhoa1030]

I had major anxiety going into building my new PC. My last experience with the OG Hyper212 model was not pleasant. Thanks a lot for this.

[@emanbtw3782]

I’m so confused on how you put the fan back on the heat symc

[@kevinmo411]

Hot glue or a stapler

[@misterrandom888]

@@kevinmo411 i agree. But bluetack should do the trick aswell. Thanks.