I wish getting the snap ring back on was that easy for me
@roberttrevino41842 жыл бұрын
You can stretch the blue o-ring and cap will come out. Corvette servo works great but you also need check your travel the less travel the quicker it engages I try to get about 1/8 travel
@roberttrevino41842 жыл бұрын
You can but a longer pin and you need to grind tip. You'll do a few test fits without o-rings until you reach desired travel I like 1/8 or transgo hacs shims in their HD2 kit
@seemooreb.97243 жыл бұрын
You can pull and stretch it(blue O ring at 2:10 into video) and servo cap will come out
@51-FS Жыл бұрын
Lol, did u get that tip from Richard? The transmission guy
@jamesanderson4515 Жыл бұрын
Hey am I the only one who noticed the servo removed is a corvette servo….
@stevebauer62933 жыл бұрын
That trans should of already had a Corvette servo. I think they came in the F bodies as well.
@Snow-qz8xc2 жыл бұрын
thats what the 4l65 was for, corvettes and camaros. they had thicker bell housings, torque converters, better servos. thicker shafts, etc. to take the abuse
@HeHimself8410 ай бұрын
That hat is dope
@grand3lyfecuhh7984 ай бұрын
I am having the worst time getting the snap ring back in smh. I needed a break..
@alfredorosales26683 жыл бұрын
Gracias por tus vídeos
@lsxbrothers68453 жыл бұрын
Gracias por apoyar mis videos 💪🏼
@AngelTorres-gi7ip2 жыл бұрын
Viejo buen día, que ventajas se tiene con el cervo de corvette? Son los mismos pasos para instalarlo en una 700r4 verdad?
@DavidPerez-tk5cp Жыл бұрын
Los cambios se sienten mas fuerte(brusco), 1ra a 2da, 3ra Hasta va a patinar la troca al entrar los cambios bajo aceleracion
@speedfreak11619 ай бұрын
It All ready was a Corvette servo that you took out
@palerider67572 жыл бұрын
So you don't have to swap anything from one servo to the other? It's just a simple swap?
@lsxbrothers68452 жыл бұрын
Yeah very easy swap
@THECHAMUKO134 жыл бұрын
I seen a different video where they put some trans oil before they put it in so it's not dry or it doesn't make a difference?
@lsxbrothers68454 жыл бұрын
Not really, mine is working fine 👌🏼
@seemooreb.97243 жыл бұрын
Yes , it makes a diff. , it'll be metal on metal without film of oil lubricating it. . Oil it before install
@rubensalais15024 жыл бұрын
Great video
@lsxbrothers68454 жыл бұрын
Thanks 👍🏼
@Omar-O2710 ай бұрын
Me recomiendas instalar el corvette servo en mi 4L60e + un 6.0
@yosoyuniversal3 жыл бұрын
Can that corvette servo fit on a 02 gmc yukon denali trans?
@lsxbrothers68453 жыл бұрын
Yes 👍🏼
@yosoyuniversal3 жыл бұрын
@@lsxbrothers6845 thanks man !
@antonioguzman4174 жыл бұрын
Do you need to oil it first?
@CQBTitan4 жыл бұрын
100% make sure all seals and o rings are properly lubed and/or oiled. I didn’t properly lube the cover o ring putting it back in and it ripped without me realizing, so I went to test it and it puked all the ATF and completely smoked the entire trans. Now I drive a Dodge 👌
@bigchungus77204 жыл бұрын
Is there any cons to this for towing or hauling heavy loads ??
@lsxbrothers68454 жыл бұрын
Yes the shifting is better
@bamadave19833 жыл бұрын
Yes it puts more pressure on the 2/4 band allowing to hold better you need to get the assembly thou the vette springs are stiffer
@robpaul79002 жыл бұрын
Does it matter which side snap ring ends are at?
@lsxbrothers68452 жыл бұрын
No
@bobchrysler1784 жыл бұрын
What is the part number for the corvette servo?
@lsxbrothers68453 жыл бұрын
bob chrysler I apologize for the late response, Here is a link to the one that I got on mine. www.ebay.com/itm/122754582455
@joseduron76233 жыл бұрын
what's up friend This corvette cervo can be installed on a 2007 chevy tahoe 4wd. I'm interested. what is the cost of the installation. where is your workshop
@lsxbrothers68453 жыл бұрын
Yeah it can be installed. And I don’t have a shop, all the work I do it on my garage
@joseduron76233 жыл бұрын
Donde vives
@joseduron76233 жыл бұрын
Tengo planeado poner mas cosas en esa troka algo más agresivo me puede ayudar.
@lsxbrothers68453 жыл бұрын
@@joseduron7623 en Grand Rapids Michigan
@lsxbrothers68453 жыл бұрын
@@joseduron7623 si claro que si
@dameanrosales69444 жыл бұрын
You think it'll be difficult under a truck?
@lsxbrothers68454 жыл бұрын
Not really the trucks has more space than my car, so you should have no problem doing it.
@fatimadnoor75634 жыл бұрын
What does the Corvette Servo do
@lsxbrothers68454 жыл бұрын
Arguably one of the most inexpensive, yet most rewarding upgrades to your 700R4 or 4L60E (4L65E, 4L70E) transmission is the corvette servo. Right away you will notice faster and firmer 1-2 and 2-3 shifts. The corvette servo will give your transmission 50% more apply pressure, which is just what you need to keep from burning your transmission up under heavy load situations. The corvette servo is a must for any performance vehicle, for towing, RV, or off road use, and is a positive upgrade for any 700R4 or 4L60E transmission. Our servo is easy to install and can be done with the transmission in the vehicle. The servo comes with all of the necessary seals for installation; including the outer cover o-ring, as well as three pages of instructions with diagrams.If you have already decided to install a corvette servo, your next question might be whether or not you should use the corvette servo with the longer pin instead. Here’s how to decide.
@fatimadnoor75634 жыл бұрын
Ls Brothers Garage We have a 2006 Chevy Suburban 2wd and we pull with it a lot transmission already went out but we’re getting a rebuilt one, would you recommend us upgrading to a Corvette Servo ? Also thank you for the quick reply 💫
@lsxbrothers68454 жыл бұрын
Fatima D Noor most definitely, my Brother & I we’ve been using this one from EBay and we have not had any problems with it. www.ebay.com/itm/122734756783
@bamadave19833 жыл бұрын
@@fatimadnoor7563 make sure to put the wide band in it . Watch Precision Transmission here on KZbin how to make it way better