Рет қаралды 3,379
This video goes into detail on how to install eaves on a steel frame home.
Storm talks through the process and then there is a close up video showing all the details. We found the eaves quite tricky to get right initially, but the sheet lifter was a game changer in the end!
It meant that Matt could install the eaves himself.
And to install the eaves, he:
--fixes up the rivets on the sprockets
-- marks the placement of the sprockets on the cladding,
-- measures width and cuts to fit - leaving not much wiggle room so that eaves go up tight
-- cuts plastic connector piece to fit width and join sheets together
-- uses sheet lifter to maneuver and put sheet in place
-- screws sheets in place using spacer and markings on cladding
Questions? Comments? Leave these below or email us at thehousethatmattbuilt@gmail.com
====
Follow us on the socials for other snaps and snippets:
/ thehousethatmattbuilt
/ housethatmattbuilt
Find out more about the kit home company we're using -- Paal Kit Homes:
www.paalkithom...
/ paalkithomes
#kithome #diyconstruction #build
====
This is a video in our series on building your own kit home
====
SOME OF OUR OTHER VIDEOS -
How to install gyprock plasterboard - • How to install gyprock...
Installing the doors on our steel frame Paal kit home - • Installing the doors i...
Tips for cladding our steel frame home in Summit weatherboard - • Tips for cladding our ...
Installing support panels in steel frame wall - • Installing support pan...
Wrapping our steel frame home in external insulation - • Wrapping our steel fra...
Window installation in steel frame kit home - • Window installation in...
Top 5 tools for kit home owner builders - • Top 5 tools for kit ho...
Installing roofing sheets on the verandah of our steel frame kit home - • Installing roofing she...
Installing the verandah for our steel frame kit home - • Installing the veranda...
Installing roof apexes for steel kit home - • Installing roof apexes...
Installing roof trusses - • Installing roof trusses