How to Install Lowering Shackles and Hangers 99-07 Silverado Sierra

[@jackstandbuilds]

If y'all need work done to your trucks in the DFW area or you wanna bring your truck to me from wherever you're from, message my instagram @jackstandbuilds I do great work for great pricing! Cam swaps, engine swaps, headers, trans swaps, etc. HMU!

[@Arcticfy]

cam swap 4.8 how much you charge?

[@jackstandbuilds]

@@Arcticfy message me on instagram! I've got some good pricing

[@jackstandbuilds]

@@Arcticfy btw, we can have a conversation on IG but I'll charge 400$ for a cam swap you bring the parts. 500$ if I have to pull the heads

[@beetee801]

Still have the stock hangers? I'll buy them off you.

[@toddgriffey7202]

@@jackstandbuilds where are you located

[@raycobra6078]

I really liked the totally man I have been looking for a video like thia for a while and usually they don't show you how to do it and you did it great. It's pretty simple when someone shows you the right way.

[@gmcsierraproject585]

I did flip kit and c notch.. Front drop spindles only.. And also did a v6 v8 swap.. Got a really good deal on a 6.0 lq9

[@aaronzavala4336]

Do you know if 06 spindles fit my 08 gmc I ordered the wrong year I’m stressing they look identical

[@jessetorres6317]

The 06s don’t have rivets they have welds all along the edge of the factory hanger. Looks fun to remove.

[@danielz3594]

Drivin around on full slicks I love it lol

[@urielhernandez1156]

Could you do the hanger then the drop shackle? I went ahead and did the hanger before doing the drop shackle not sure if that makes a difference though.

[@jeremysav2666]

Great video. Best one i found, good job man help me out a lot!!!!!

[@literallygod3680]

Bro great video, I really appreciate it. Keep it up brother!

[@richvictorin9029]

Thanks for the help, definitely going to follow what you did. Thanks again

[@homiesjdmnation]

Did you use the axle shim kit with the 6513 hanger kit?

[@kenpenn2135]

I just installed those shackles on my 94 c2500..but i put my on with the open in facing the rear...does this affect anything? Oh...it only gave me about a 1 inch drop...I'm confused?

[@7beast298]

What brand are those hangers sir?

[@subelejamz2038]

Did you remove a leaf spring

[@Arcticfy]

just go get a set of leaf springs from the junk yard dismantlers right there in haltom only charged me $25 each side for the leaf springs and you get the shackles with them(got lucky found a truck with drop shackles sold those for $40 and nearly made my money back but it rides way better (my truck) because previous owner removed middle leaf spring

[@jyb7976]

How would lowering shackles and lowering blocks would look ? Random question

[@miguelamaya4673]

Hey I did the exact same thing to my truck 2003 GMC Sierra single cab my truck is squeaking bad why do you think that’s happening I installed hangers and shackles

[@spunkbob-r5v]

so i know that a 95 ram will be different but if i drop it 2in on a shackle and 2in on a hanger will i need to c notch the frame?

[@abg8724]

Did u drop it?

[@cesarmartinez1761]

where u get the headers link please

[@salvadorflores7438]

Since your truck us missing a leaf spring does it still ride good or is it bouncy or mushy?

[@jackstandbuilds]

it rides like crap. I need to get a new set of em, I had to take the shackles off cause it was bottomed out

[@willywonka5590]

Is it stock suspension up front ?

[@2lowfabworkz]

I was told I need to change my hangers back to the originals to drop it more from the back

[@r.i.p_the_5.367]

I Did the hangers and shackles too. Sits just slightly lower in the back

[@ruelas1065]

Did you experience and wobble bc of the hangers ?

[@r.i.p_the_5.367]

Ruelas no I didn’t

[@LTeli]

Will this work on longbeds?

[@alexzanderarmstrong]

Great video 👍🤓👍 well shot

[@chuy9071]

is it stock in the front? or is it slightly dropped in the front aswell?

[@davidanddiana7173]

Cool stuff man 👍

[@jackstandbuilds]

Thanks 👍

[@1_sick076]

What size tires in the back bro 🔥

[@zeazy164]

Dont think it matters, but i think you put the shackles with the plate facing toward the rear instead of facing the front.

[@Jimmyxsx]

There was no need to drop the gas tank or remove the bed.

[@Heavenlycustoms]

I think he just lifted it so he won’t blow up ig but other the bed I don’t know

[@alexayala6720]

I’m about to do this project thx for that tip I was hoping I wasn’t gonna have to take off the bed and gas tank lol

[@Jimmyxsx]

@@alexayala6720 if you don’t have an air hammer than I would totally take the bed off otherwise you’re gonna have a hard time hammering the rivets out.

[@alexayala6720]

@@Jimmyxsx alright thx what I don’t get you don’t need the bottom piece anymore like the stock one does

[@Jimmyxsx]

@@alexayala6720 no you dont need it.

[@TheScarySquares]

What was done to the front and is it 4x4 I’m trying to lower mr rcsb but it’s 4x4

[@xavierb9611]

Where did u get the rims nd wat size

[@nairbudy6403]

What height drop is this w/ hangers and brackets? 3, 4?

[@MemphisTruckMafia]

Dope I’ll try to cover my install

[@alexayala6720]

So when installing this hanger the bottom piece you don’t use no more ?

[@d_pat73]

No, I just buzzed mine off.

[@noelcristian6165]

Good shit 🔥🔥🔥

[@flattestfrog2632]

My rivets will not pop through

[@georgiaboy1579]

Good work Brother

[@kenfigueroa425]

Would you sell the stock leaf spring hangers by chance? Please let me know I’d be interested in buying them.

[@lsxbird7874]

Did you find a set? Im about to take mine off

[@leviwoodring6101]

First step take the bed off. But I cant. The bolts just spin.

[@hunterstrickland3307]

Great vid lots of help before I do mine

[@MrX3liazx]

What rims are those

[@subelejamz2038]

I have shackles and hangers ya know why is didn’t when to low like this one

[@Rada_831]

Turbo ls for the W

[@gamerghostghost6303]

Sick 🔥

[@juliorivera9358]

Sits nice 👌 Is it lowered in the front ?

[@jackstandbuilds]

v6 240k mile suspension in the front. Its just all sagging. Gonna replace it all soon

[@ulisesantonio5905]

Do you need to install the hangers or can you just drop it with the shackles?

[@josemeza5872]

You can just use shackles by themselves they give you like a 2 inch drop but with the hangers it drops a little bit more

[@diegosaldana2255]

4.8 gonna hurt some feelings😬

[@SILENTCHRIS214]

Suelo cuh

[@reddevilent.1587]

Those hangers are for the rear of crew cab trucks

[@jackstandbuilds]

RedDevil ent. Thanks bro it had me confused

[@dleyba8074]

So are those the hangers I need for a 2002 silverado ext cab. The ones that didn't fit 1st..

[@stupidassol]

I wish someone would show this with the bed still on. I cannot get the upper shackle bolt out as it hits the frame. And the spring hits the bottom of the bed before the bolt clears the frame for removal. Fucking wonderful...

[@stupidassol]

Guess I'm going to cut the fucking bolt head off and get 2 (both sides I'd assume) new ones for install.

[@jackstandbuilds]

Haven’t had the shackle bolt hit the frame. The hanger bolt will hit the tank

[@stupidassol]

@@jackstandbuilds I bent the seam on the bottom side of the bed up and took some of it down with a 60 grit flap disk on an angle grinder, then jacked up the ass end of the leaf until the bolt had just enough room. If it wasn't for the seam of the bed, it wouldnt have been an issue at all. And I'm not doing hangers, not going that low. Yet.

[@luisalvarado4778]

Look up TWA Motorsports he has a good video

[@elminilindo80]

What hangers did you use?