HOW TO INSTALL LS SWAP FUEL TANK VENT. (86 MONTE CARLO SS)

[@thehpw]

Good info, thanks! You can actually put a loop in the hose too! And also I think the vent should be higher than the filler neck, or the tank, whichever is higher.

[@reggiesride6670]

Great video. Can you tell me what size bolt you used to mount the valve? And did it come through the bed?

[@PENNYLS1]

I think it was 5/16 self tap or whatever size that fits through the bracket. The bolt did come through the trunk floor but I have sound deadening so it didn't come all the way through. Hope that helps.

[@reggiesride6670]

Thanks

[@leonardunderwood4635]

What's the part number for the sending unit and the float that you use it

[@PENNYLS1]

www.psiconversion.com/products/fuel_pump_kits/fuel_pumps/TAN-SW.html

[@65chevelleboys91]

Thank you for the video I read on the manufacture website that it had to be vertical because of the check valve built in .In case of rollover

[@barrets6226]

The bag mine came in says vertical only.

[@DBA1976]

Hey thanks for all that. It’s gonna help me out on my tank install. Close to the same set up.

[@Dreskezi]

You definitely just helped me out

[@williamcannon8136]

Thanks for the info, I'll do that on my C10 swap also

[@ddstaton211]

PennyLS1 that proforged kit is great go with umi suspension great people to deal with

[@DBA1976]

I installed a new tank , it looks like yours. I set it up like you did , but I’m still smelling gas fumes. How is your car in the garage doing, as far has fumes?

[@PENNYLS1]

No more fumes after I installed the rollover valve

[@DBA1976]

@@PENNYLS1 OK Thanks. I’ll review my install closer. And see if I missed anything, I’m perplexed on the smell. Oh one last thing! Are you running a vented gas cap? Thanks for your help

[@carminking9315]

Coming along well fam!

[@spencerandmelaniehervey957]

Bro, I'm in mansfield with a 87 Monte. Let's link up....

[@MrOlds8488]

Good shit

[@Driver_Joe]

👍🏽👍🏽