Showing you all how to install quick release fasteners on your car. Happy with the results of these on my 2007 civic si, fg2. Enjoy My Instagram: / gerb_productions #k20z3 #k24a2 #fg2
Пікірлер: 75
@angelrodriguez76472 жыл бұрын
You should probably get some touch up paint and paint over the hole so it dont rust
@kevinharris-charles40662 жыл бұрын
Quick, clean install video. Nice job Gerb 👏
@NYGFRANK872 жыл бұрын
Damn Gerb I've been watching you these past 5 years and you are still loyal to this car. I had a 2007 Si, 2015 Si and a 2017 Si I had the last 4 years. Just traded it in for an Acura and now I'm looking for another 2007-2011 Si sedan. Great work man. The 8th gen was always my favorite Si
@jaymesp952 жыл бұрын
I would of just got a new bumper ... looks way cleaner without them ricey things
@henryp72522 жыл бұрын
RIGHT
@bige71862 жыл бұрын
Eh people have there preferences 🤷🏽♂️ at the end of the day its his car
@codycuster13902 жыл бұрын
It’s not just for looks if you take off your bumper often it really comes in handy
@El_payaso_.2 жыл бұрын
@@bige7186 yeah but tbh you see mostly high schoolers rocking those, when you older adult we go for that clean in simple stock look
@bige71862 жыл бұрын
@@El_payaso_. to each there own
@FG2PRL2 жыл бұрын
I feel you on the fender part. Was hesitant to cut my fenders for the sidemarkers but we got it done lol
@keegsbro7862 жыл бұрын
Your intro is straight heat my guy🔥🔥
@TheGerbsteve2 жыл бұрын
Appreciate that man 🙏🏼
@mofendii65402 жыл бұрын
You did a great job 👏
@TheGerbsteve2 жыл бұрын
🙏🏼
@andrewpatterson26372 жыл бұрын
Gerb!!! I was had the quick release on my car when I bought it however I removed the bumper and used command strips+crazy glue one the inside of the bumper cover....was then able to use pull tie on the backside so that it was hidden after that I filled the existing holes and resprayed with rattle can and no more holes plus my bumper is now secure and it looks OEM
@TheGerbsteve2 жыл бұрын
Right on man
@GhxstMode2 жыл бұрын
Came out 🔥 bro. Inspired me to order a set for my clapped out bumper Lol
@TheGerbsteve2 жыл бұрын
Glad I could inspire you man, you’ll like them 🤙🏼
@markmunar89462 жыл бұрын
I painted my callipers orange as well didnt even notice you did yours orange too! Lol def gon get these quick releases for my bumper. Idk why but these 8th gens it’s always the passenger side fender that always pokes out lol
@dafb6dafb622 жыл бұрын
Came out clean bro 😎🥲
@TheGerbsteve2 жыл бұрын
Thanks mane 🙏🏼
@dafb6dafb622 жыл бұрын
@@TheGerbsteve welcome my boi 💯🙏
@michaeljimenez4102 жыл бұрын
Just JB weld a washer lol mines held up for months until I hit a mean curb but I redid it and it’s holding up fine.
@mofendii65402 жыл бұрын
That was the first thing I did when I got my fg2 bro
@CarVidz2 жыл бұрын
Dang, looks nice.
@TheGerbsteve2 жыл бұрын
Thank you 🙏🏼
@CarVidz2 жыл бұрын
Your welcome.
@e92slate2 жыл бұрын
That’s fire 🔥
@TheGerbsteve2 жыл бұрын
Appreciate that 🙏🏼
@e92slate2 жыл бұрын
@@TheGerbsteve keep it up bro 😎
@noblewon35072 жыл бұрын
Nice install ..
@TheGerbsteve2 жыл бұрын
Thanks bro
@operator84702 жыл бұрын
Nice bro!! Only thing I would do is spray a lil rust protection👍😎
@TheGerbsteve2 жыл бұрын
They came out better than I thought! I was thinking that too.
@rinconemmanuel89062 жыл бұрын
ah ouii merciiii Thanks !!!!!
@QuantikoOfficial2 жыл бұрын
are those Advanti OST Storms?? oh man i had those on my rsx type s those are HOT
@TheGerbsteve2 жыл бұрын
XXR 527's bro
@OmarHernandez-iu2zc2 жыл бұрын
I feel you on the drill bro xD Iol
@TheGerbsteve2 жыл бұрын
It was hard for me to do that, but I said w.e
@dior9962 Жыл бұрын
where did u get ur front lip from
@mofendii65402 жыл бұрын
Your my favorite KZbin 🤙🏼💙 Always watch your channel when I’m bored I wanna race you one day w my fg2 k20
@TheGerbsteve2 жыл бұрын
That's wild bro... Have to say, I appreciate your support! I'd be down to have some fun against your k20
@CreampuffK2 жыл бұрын
Should of went quik-latch bro. Looks cleaner, just as effective and you don't have to drill into the fender
@TheGerbsteve2 жыл бұрын
I know, I know.. just had these already and they been sitting around for like two years
@QuantikoOfficial2 жыл бұрын
i don’t see the hate 🤷🏾♂️ it’s preference. personally i like them - they help remove the bumper when working on a car. but they also kinda look a little ugly in my opinion even tho i had it on my rsx, nobody complained but that’s JUST preference! i’m 50:50
@d3athsign356 Жыл бұрын
Just seen my hanging today found a new project
@juanbordelies62042 жыл бұрын
Let’s lock it up bro I’m down in new Britain CT
@TheGerbsteve2 жыл бұрын
Depends what you have
@shengyang49162 жыл бұрын
Bands will break eventually. I had mine zip tie.
@TheGerbsteve2 жыл бұрын
Good thing I have zip ties on deck
@victorrandall2038 Жыл бұрын
Thas' why you should've invested in more securement bands,. Duhhhh
@johnnyturbo84602 жыл бұрын
This is one "mod" I don't get. Why? Isn't the rest of the bumper still bolted in the factory locations? How often to you need to take your bumper off? Sure hope you painted the bare metal or at least put some clear finger nail polish on it
@slow_fk8_2 жыл бұрын
When it comes to working on this specific model si you have to continuously remove the bumper
@johnnyturbo84602 жыл бұрын
@@slow_fk8_ remove it to do what?
@slow_fk8_2 жыл бұрын
@@johnnyturbo8460 to be able to install new CAI or replace filter for CAI, radiator, if you go turbo you gotta take it off to install intercooler
@johnnyturbo84602 жыл бұрын
@@slow_fk8_ got ya... I would just install a new radiator when doing a turbo before they are CHEAP and NOT do those quick release things. Just not my thing.
@slow_fk8_2 жыл бұрын
@@johnnyturbo8460 ya I get what you mean, if only the car had more engine space that way we don’t install these
@dpm87632 жыл бұрын
hey what’s your tire size ?
@TheGerbsteve2 жыл бұрын
215 45 r17
@zauly1. Жыл бұрын
What wheels are those?
@TheGerbsteve11 ай бұрын
xxr 527's
@SloEP3_Ja2 жыл бұрын
Bought a working drill, battery, and charger off of OfferUp and a drill bit kit from Walmart for $70 total😉
@TheGerbsteve2 жыл бұрын
I love offerup... Great score man. I'll have to check and see what I can find
@SloEP3_Ja2 жыл бұрын
@@TheGerbsteve I’ve got a black 7th gen EP3 Si with K20A3. Tryna do a EP3 type r body conversion and possibly gonna do K20A2 or Z1 swap since it’s basically plug n play with kpro, good content tho brother I love your car
@El_payaso_.2 жыл бұрын
I think that’s ricer, that like for them fresh high schoolers who drive bucket cars, should of just bought new bracket , but it’s your car 🤷🏾♂️ or would of looked little cleaner with Quik-latch bumper release
@TheGerbsteve2 жыл бұрын
Had these for awhile, so I wanted to run them.
@InnercityHillbilly11 ай бұрын
You forgot to show how long it takes to get the nut on the back of the Allen bolt in the metal Fender side. You literally jumped right past that 2 hours that it took you to get that tighten down. Why you got to lie to everybody dude??
@Pokka6762 жыл бұрын
Sick clean. But. But. Paint / touch up the freakin hole or it will rust in no time
@ek4dr982 жыл бұрын
Ouch 🤕
@TheGerbsteve2 жыл бұрын
😬
@victorrandall2038 Жыл бұрын
I hate when people complain about the bands breaking.. when clearly this is not a once all fix all... Invest in more securement bands dingalings..Duhhhhh