How To Install Rear Brake Pads on CLK Class Mercedes | Rear Brake Pads for W209 CLK Mercedes

How to Install Mercedes Brake Pads | CLK Class | Rear Brake Pads for W209 Mercedes | How To Install Brake Pads on CLK Class Mercedes | Rear Brake Pads for W209 CLK Mercedes
#HarjinderSidhu #mercedesbrakepads #clkmercedes #w209mercedes
🙏 Shop online at Amazon - www.amazon.com/shop/mrsidhu3250
Any Amazon Link in my description is an affiliate link. “As an Amazon Associate, I earn from qualifying purchases.” I would greatly appreciate it if you considered supporting my channel while shopping from the Amazon store by buying anything you needed from Amazon after clicking on one of the links. This gives me a small commission at no additional cost to you and helps me continue producing more videos! Thanks a million for your support!!🙏
Bosch BP876 QuietCast Premium Disc Brake Pad Set - amzn.to/2vhPtEv
Wheel Spacers to fit c350 wheels:
amzn.to/47RFHeE
amzn.to/49RRmM9
amzn.to/47uiAqJ
Thanks for watching, Enjoy, and please don't forget to: LIKE, COMMENT, FAVORITE, SHARE and SUBSCRIBE.
Please SUBSCRIBE, If you haven't done so yet, take a look around. If you like what you see be sure to Subscribe to be notified when new content is posted. Thanks again for visiting!
Easy Steps - easysteps.jimdo.com/
{This video is for educational purposes only, I am NOT a Professional Licensed/Certified Mechanic and I am not liable/Responsible in any way for damages caused to YOU or your Vehicle due to this video}. Please leave your comments below if you have any questions or concerns. Hope this Helps someone out there.
Cheers!
*Disclaimer: All information is for educational purposes only and is the personal view of the author.

[@jujagthemag]

This is the best video I've seen on replacing the pads. The camera positioning is really clear. Thanks buddy. You may have saved me money and encouraged me confidence.

[@rob440six]

Short, succinct, and clear. This is how auto repair videos should be done. Good job, sir.

[@EasySteps_Sidhu]

Thanks, glad to help. Thank you so much for the like and thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@TheMBDESIGNSTUDIO]

Thanks so much, I was having problems with squeezing in my new pads and you solved it, where other videos just showed the new pads sliding in no problem you showed how to push the cylinder back. Fair play to you Easy Steps.

[@Foxtechconsultants]

Love your videos!! This was a huge help on my clk500. I subscribed for your cooking videos but these Mercedes how-to videos are just a sweet bonus. Well done 👍👍

[@jchacon921]

Great quality video! Definitely saved me time and money! Thanks!

[@Americana64]

Glad I watched your video first. I am used to changing brakes where the whole caliper comes off. Good Video. Thanks.

[@void_dweller7851]

Great video, excellent explanation.. thank you

[@angelodirollo3405]

Very good step by step procedure for pads replacement, clearly spoken so to be easily understood by non english mother-tongue persons. Thanks a lot. I'd like to point out that before any replacement is carried out some measurements should be performed in order to take a decision on whether or not a replacement is necessary, I mean that, for instance, thickness of the pads and the rotor. wear on the star bolts diameters and related holes should be evaluated. Have you edited any such a procedure covering this issue? Angelo Di Rollo (Rome)

[@jimadams244]

very helpfull and saves me a fortune on garage bills thank you

[@EasySteps_Sidhu]

You are most welcome. Thanks, glad to help. Thank you so much for the like and thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my other channel "Sidhu DIY" so please subscribe, thanks. Here is the link for my other channel, thanks in advance. kzbin.info

[@capsfan89128]

Save me so much money thank you!!!!!

[@IceMan-il7dx]

Was going to take mine to the shop but great vid, really clear! Thank you!

[@EasySteps_Sidhu]

You are most welcome, glad to help. Thank you so much for the like and thanks for watching.

[@scottsimoncic6495]

That's one big wheel spacer there.... Thank You for the video!

[@scottsimoncic6495]

You have a beautiful husky... I have one as well.... Great Dogs

[@FunnyVideo5.1]

very very good .... thanks

[@jnambo5500]

Thank you!

[@jordanross123]

You didn't tell the viewers to remove brake fluid cap when pushing back the Pistons, not doing this can potentially burst the Pistons

[@jonaldana1540]

jordan ross

[@J8den]

But isnt that only dangerous if you added brake fluid? Brake fluid normally goes down on low brakes. You change brakes it goes back, unless you added more brake fluid :/

[@AdrianaSclafani]

Hi sir! Very informative video! Where did you purchase your break pads from?

[@arechangemikael760]

i'd like the same as yours 1 inch 112 to 112 with studs

[@arechangemikael760]

Hi do you have link to buy the wheel spacers to fit c350 wheels?

[@EasySteps_Sidhu]

Thanks for asking here is the link. Good luck with your DIY. Wheel Spacers to fit c350 wheels: amzn.to/47RFHeE amzn.to/49RRmM9

[@arechangemikael760]

how much thick are yours? i tried 10mm and it was not enough @@EasySteps_Sidhu

[@michaelashton4350]

Thanks for the video post very easy to follow.

[@EasySteps_Sidhu]

You are most welcome, glad to help. Thank you so much for the like and thanks for watching.

[@EasySteps_Sidhu]

I am posting a thanks message to my viewers/subscribers for their support. Both KZbin channel was hacked/hijacked on (4/24/2019) and I got it back now (5/5/2019). The hacker has deleted the information under the description of my videos as well as all my comments. My KZbin Account Got Hacked - kzbin.info/www/bejne/Z6mvdpafha-kos0

[@EasySteps_Sidhu]

I have started posting auto videos on my other channel "Sidhu DIY" so please subscribes, thanks. Here is the link for my other channel, thanks. kzbin.info/door/uifMS69Pmx-ykxCar5XW6Q

[@toddedwards8354]

That's so easy it's a crime to pay someone else to do it.

[@malave76]

Hi

[@ratty5001]

Spacers, and red paint make the junk go faster... lol. Ever wondered about the sludge behind the Caliper piston?

[@EasySteps_Sidhu]

This was a project car and bought it like this, all messed up. Thanks for sharing your thoughts and thanks for watching.

[@EasySteps_Sidhu]

I have started posting DIY videos on my 2nd channel "Sidhu DIY" so please check it out and subscribe, thank you.🙌 🙏 🙌 kzbin.info