Tap to unmute

How to Install Recliner Seat Springs

  Рет қаралды 108,606

Recliner Repair Guy

Recliner Repair Guy

Күн бұрын

Пікірлер: 95
@orangefj2618
@orangefj2618 11 ай бұрын
Great video. All of the tips and tricks are the secret sauce of repairs. I watched this to gain a standpoint of practicality of if it's worth it to save my beloved 15 year old "The Alligator" La-Z-Boy chair that now has 2 broken springs. Doesn't appear to be as much of a daunting of a task now.
@alaingoulet4468
@alaingoulet4468 10 ай бұрын
Great video. I would not have contemplated replacing a broken spring on my Lazy Boy seat without watching your video. I tackled the removal of the seat, then replaced only one of the springs. You must be really strong as I had a heck of a time pulling the spring back into the open clip. :) Once the spring was replaced, I then tackled re-inserting the seat back into the Lazy Boy. For some reason a had a really, really hard time getting the brackets to line up with the screw holes on the bottom on the seat. After several hours of trying I had to stop and come back to the problem. What eventually worked for me was to turn the Lazy boy around 180 degrees, lower the back of the chair as flat as possible then I was able the get the rear bracket screws on but no luck lining up the front brackets. The spring on both sides are a pain in the neck. I eventually laid the chair down on the side and got the screws in. I could not believe how hard it was to get these 8 screws back in. Do you have any tips?
@reclinerrepairguy4155
@reclinerrepairguy4155 10 ай бұрын
@alaingoulet4468 - Patience is probably the biggest thing that will help you here. It becomes obvious when reinstalling the seat that the brackets don't uniformly fall into place when you slide the seat back in. So, you have to work with each corner a bit to get the brackets aligned & the screws started. Just start the screws enough so they won't fall out, do not tighten. Save one of the front corner brackets for last. Push the last front bracket inward, depressing the spring. Have a helper then pull (or push) the seat frame up against the bracket. Whoever has a free hand at this point can move the frame until the bracket holes align with the holes in the seat frame & start the screws. Finish tightening all the bracket screws. Once you've done this a time or two it gets easier. You'll have less trouble the next time. ;)
@JimLambier
@JimLambier 2 жыл бұрын
I spent over an hour trying to reattach my seat springs. All I ended up achieving was getting my hands covered in bruises and scratches and getting sweaty. I found your video and saw your tip about using the rope to pull the spring. This made it so much easier!!! Within 5 minutes, all four springs were reattached and I didn't lose any blood doing it. Before watching your video, I was thinking that my recliner was destined for the landfill.
@ronwmmcelman1246
@ronwmmcelman1246 3 жыл бұрын
Just completed a spring replacement on a twenty year old favorite chair of mine. Would have never felt comfortable trying to attempt this without your video. Thanks so much!
@zachkoenig2012
@zachkoenig2012 5 ай бұрын
Thank you, the trick using a small rope and half knot was exactly what I need to re-attach my springs. Saved me time and money from buying the spring replacement tool.
@reclinerrepairguy4155
@reclinerrepairguy4155 5 ай бұрын
@zachkoenig2012 - You're welcome -- good job!
@bongoscongasantiquecashreg4544
@bongoscongasantiquecashreg4544 4 жыл бұрын
Great to know the other options for La-Z-Boy seat Springs since I have a La-Z-Boy recliner this is helpful soooooooo appreciate you!
@albdamned577
@albdamned577 3 жыл бұрын
Followed your instructions and my favorite chair is back to new. You turned a rather depressing experience into a learning one.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Al B Damned -- Good job!
@derekoliver4047
@derekoliver4047 3 жыл бұрын
This is the best video we found to replace the springs on our recliner. Thanks, it made the job so much easier than when we were trying to figure it out on our own -- especially trying to stretch the springs.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Derek Oliver - You're welcome - good job!
@whitneyranchproductions4637
@whitneyranchproductions4637 3 жыл бұрын
Thanks for sharing your knowledge with us. I certainly appreciate it. I broke a seat spring today on my recliner and jury-rigged a temporary repair with a hose-clamp. Now I can order a set of springs and repair at my leisure. You saved me a sock full of money. Thanks RRG!!!
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Mike Whitney - You're welcome!
@kentwall3649
@kentwall3649 4 жыл бұрын
I want to thank you for your videos. I just had to replace the seat springs in my La-Z-Boy Big Man recliner and and the information and demonstrations in the videos were a huge help. Thank you.
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@Kent Wall - You're welcome!
@johnwood760
@johnwood760 3 жыл бұрын
@@reclinerrepairguy4155 old Manuel lever on right side, spring came loose how to reattach?
@richardc2374
@richardc2374 4 жыл бұрын
Exactly what I needed to see to fix my Lazyboy. Thanks RRG!
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@Richard C - You're welcome!
@mattahern4959
@mattahern4959 5 жыл бұрын
thank you! I know I can do this. I was thinking that I needed a new chair but I was not looking forward to doing that! so again thank you!
@reclinerrepairguy4155
@reclinerrepairguy4155 5 жыл бұрын
Matt Ahern -- You're welcome!
@jeffs2905
@jeffs2905 4 ай бұрын
Invaluable info! Thanks again Mister Repair Guy🙂🙂
@simonhale3641
@simonhale3641 23 күн бұрын
A really helpful playlist of videos thanks. But do you have a video showing how to remove the seat base, as you mention you can do it without removing the recliner mechanism? Thanks
@reclinerrepairguy4155
@reclinerrepairguy4155 23 күн бұрын
@simonhale3641 - With many La-z-boy reclining chairs, you can often remove the seat. Here's how to do it -----> kzbin.info/www/bejne/sH2qaHuQpcitbNU
@simonhale3641
@simonhale3641 22 күн бұрын
Excellent. Many thanks
@billymarkwell1105
@billymarkwell1105 3 ай бұрын
thanks for the video, without it I would have never had the courage to attempt to replace my broken spring. I've followed your instructions but am struggling to stretch the spring.. I bought springs from Amazon, and wonder if they may be stiffer than the ones from La-Z-Boy.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 ай бұрын
@billymarkwell1105 - As a general rule, La-z-boy springs are not difficult to stretch. So yes, that could be the problem. A simple test you can do is to reinstall one of the original springs that's not broken. If it goes on easier, you are correct. If you are the original owner of the furniture, the springs are likely covered by warranty. And you should be able to get them for a nominal fee. Here's how to order them -------> kzbin.info/www/bejne/a36ZlWdmp917Y9U
@Justabigham
@Justabigham 3 жыл бұрын
Awesome videos. Thanks much for posting them!!!!
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Justabigham - You're welcome!
@903262
@903262 Жыл бұрын
Great videos, I recently picked up a used La-Z-Boy rocker recliner and it has a missing coil spring and clip for the zigzag spring, it looks like the anchor for the coil spring pulled out of the wood, could you do a video one a repair for that ?
@robsarchery9679
@robsarchery9679 4 жыл бұрын
You need to do a video on how to put the bottons back on the back cushion of a lazyboy recline 3 out of the 4 have come off mine.Only a year old.Please tell me how.
@baila4buddy17
@baila4buddy17 11 ай бұрын
Your instructions were fantastic. Everything went as you said it would. Now, I’m trying to put the seat back together and one side is not coming all the way up to where the screw is supposed to go. It is on the front of the seat. Any suggestions on what I’m doing wrong?
@reclinerrepairguy4155
@reclinerrepairguy4155 11 ай бұрын
@baila4buddy17 - Make sure the front brackets are in the proper position & not flipped upside down. Also, when you put the front brackets against the inside of the seat rails, you're also compressing a spring at the same, while pulling up on the seat frame. Other times it just takes some maneuvering to work the seat frame into proper position. If you can get the holes in the brackets relatively close to the seat frame, the screws are sometimes long enough to start them. Once you have them all started, you can tighten them to draw everything together.
@baila4buddy17
@baila4buddy17 11 ай бұрын
@@reclinerrepairguy4155 thank you so much!
@indianainnovation8002
@indianainnovation8002 9 ай бұрын
Thank you for this very helpful video.
@reclinerrepairguy4155
@reclinerrepairguy4155 9 ай бұрын
@indianainnovation8002 - You're welcome!
@rwferr2
@rwferr2 4 жыл бұрын
Thanks for the video. I got a spring from lazyboy free. If you are the original owner the parts are guaranteed for life. I did pay shipping and handling. I replaced my spring without removing the seat from the chair or removing any staples. Its kind of a bitch getting those crimps on and off but still easier than disassembly and removing all those staples. The part I thought would be the hardest, getting the spring on the top clip, was easiest part.
@grabberblue245
@grabberblue245 3 жыл бұрын
Basically what I am going to attempt. I'm glad I saw your post.
@frankwallace58
@frankwallace58 2 жыл бұрын
Hello very helpful video could you be more specific on the twine pounds rating brand name I can't seem to find anything strong enough
@reclinerrepairguy4155
@reclinerrepairguy4155 2 жыл бұрын
@frankwallace58 - I use the same twine that's used to tie coil seat springs together. I'm not aware of it having a strength rating. It doesn't have to be twine, it can be rope or cord instead. It just has to be thin enough to loop around the spring & your hand. And strong enough so that you are confident it won't break.
@dianaverhulst3407
@dianaverhulst3407 3 жыл бұрын
How does one measure the old spring (since they are curved) to ensure the correct replacement spring?
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Diana Verhulst - If you get replacement springs from the manufacturer, they will be the correct length. They use the chair ID#s to determine exactly what spring (& length) you need. If you're cutting springs to length from a roll, use a cloth tape measure -- or any flexible tape that can measure a surface that is not flat. Simply measure from end to end.
@willhuang6553
@willhuang6553 3 жыл бұрын
Where did you purchase the front seat spring clips? I looked on amazon and the only type they sell are the screw in types. I didn't see the one in your video where you hammer it in. Thanks in advance.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@will huang - It's ok to use the screw-in type, which I typically do. Because the hammer-in type that La-z-boy uses is not available through them. (At least the last time I tried to order some, they weren't.) And I don't know where else to look for them, other than online upholstery suppliers. They may be out there, somewhere...
@ukelilly
@ukelilly Жыл бұрын
do I need the brace wire ? mine is broken.
@Racinrasslinfan36
@Racinrasslinfan36 Жыл бұрын
Yes without the brace wire you can’t clip the springs to anything
@baila4buddy17
@baila4buddy17 10 ай бұрын
your video was so great. I replaced the springs put everything back and now the chair won’t recline. The foot rest moves out just fine but the chair itself will no longer recline. Suggestions?
@reclinerrepairguy4155
@reclinerrepairguy4155 10 ай бұрын
@baila4buddy17 - The seat was most likely reinstalled improperly. You may have the brackets closest to the front of the chair reversed (flipped). Also, make sure the tension adjustment (wing nut) on the Seat Swings is not tightened all the way. Refer back to the seat removal video for more details -----> kzbin.info/www/bejne/sH2qaHuQpcitbNU
@baila4buddy17
@baila4buddy17 10 ай бұрын
@@reclinerrepairguy4155 Thanks for the link to the other video. I haven’t had time to get to the chair for this repair, but I don’t see in your video how the front bracket can be re-installed backwards. Perhaps I’ll understand better when I get to the repair myself. Regardless, thanks so much for getting back to you me. I really appreciate it.
@shaunamorris5801
@shaunamorris5801 2 жыл бұрын
Hello love your videos find they are very helpful. My partner and I are going to attempt to fix my old lazy boy recliner has 2 springs broken and need the foam replaced. We decided to make it a project as neither of us have done anything like this before. My question is what size of zig zag spring to I get or how to measure? Any help would be appreciated.
@reclinerrepairguy4155
@reclinerrepairguy4155 2 жыл бұрын
@Shauna Morris - If you have an upholsterer in your area, take 1 of your old springs & have them cut new ones for you. If you're ordering them thru an online upholstery supplier, get the heaviest (thickest) gauge they offer. The springs will come on a continuous roll & you'll have to cut them to length. Be sure to turn down the ends so they'll stay in the clips.
@gruivis
@gruivis 4 жыл бұрын
Excellent video! Camera angles, lighting and pace are excellent. What software did you use for editing?
@michaelbrande2286
@michaelbrande2286 4 жыл бұрын
So very helpful! Thank you!!!
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@Michael Brande - You're welcome!
@tondathomas4072
@tondathomas4072 2 жыл бұрын
Nice video, you make it look so much easier than I was imagining. I was wondering where you get your supply of clips? I don’t see the exact ones currently on my recliner online. Thanks.
@reclinerrepairguy4155
@reclinerrepairguy4155 2 жыл бұрын
@Tonda Thomas - Actually I've had so many spring clips from furniture stores, manufacturers, etc., that I haven't bought any in years. You don't need to match the original ones. Just get a paper or plastic-lined clip to reduce spring noise. Most of these clips are installed with small nails, but I use small screws instead. Here's a link to a supplier (I've never used them) that offers a spring clip style that I've frequently used --> uphsup.com/p-4815-sprc385004-spring-clips-no-sag-spring-clip-ek-paper-lined-each.aspx
@michaelhoffee8529
@michaelhoffee8529 3 жыл бұрын
i have a cheap recliner. mechanism all good. no broken springs in seat, however, when we sit (heavy person), seat sinks in rear right area under our behind. would this mean weak springs, and to change them per the video? thank you in advance, and excellent video!
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Michael Hoffee - If the springs are not broken or loose, they may be fine. See the video, 'Seat Support Principles' on the ReclinerRepairGuy.com website to learn more.
@marlenecostanzo6916
@marlenecostanzo6916 4 жыл бұрын
I need to replace the foot springs on a recliner.
@katchafire_golden_retrievers
@katchafire_golden_retrievers 3 жыл бұрын
what is an acceptable alternative to use that will attach the cross brace to the zig zag springs. I cannot find this particular item where I am.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Grant Samkin - It's usually best to use the same clips that the manufacturer used. That way the clips will be compatible with the spring wire gauge on your recliner. Contact the manufacturer or one of their dealers for parts. Keep in mind that some of these clips (there are different styles) may not install easily with pliers and may require a special tool.
@cindymertens2244
@cindymertens2244 4 жыл бұрын
can you put the springs on without the coil - then flat piece, are springs we ordered were 23" from wood to wood so we removed the coil-flat hook piece. Will this cause problems later?
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@cindy mertens - You can attach the springs however you like, but it's usually best to attach them as they were originally designed to get the proper support and comfort. If your springs are longer than the originals, you can cut them down and turn the ends (where the cut was made) to match the factory installed springs.
@helenacamilo1835
@helenacamilo1835 3 жыл бұрын
Thank you for your excellent videos. I am attempting to reupholster a 29-year old La-Z-Boy recliner. We started taking it apart before we discovered your video on how to replace the springs, so we unhooked the perfect looking springs (with lots of difficulty!) from the opposite end you show on demonstration. After watching your demos multiple times, and taking the whole chair apart, I noticed that the loops on the wire, that held that end of the springs, are worn and seem to be ready to break. Do you know where I might be able to find a replacement?
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Helena Camilo - Yes, unhooking the Seat Springs from the opposite end is much harder! Can you send a photo of the part you're referring to? Email: pete@reclinerrepairguy.com
@tylerdouglas4942
@tylerdouglas4942 4 жыл бұрын
Hello jus wondering what to do with a slightly noisy spring
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@Tyler Douglas - Seat / back spring or mechanism spring?
@jesuslovesjudy
@jesuslovesjudy Жыл бұрын
What is the coiled spring the zigzag attaches to called? I'm wanting to repair a chair that has lost all of it's springs and it had those but they are broke
@reclinerrepairguy4155
@reclinerrepairguy4155 Жыл бұрын
@jesuslovesjudy - Sorry, I don't know the part name. I've never ordered those springs or seen one fail. If you're ordering them through a local La-z-boy dealer, take one with you to the store. Or, if you're placing your order online, email a picture along with your description of the part.
@jesuslovesjudy
@jesuslovesjudy Жыл бұрын
@@reclinerrepairguy4155 thank you
@rebellos00
@rebellos00 4 жыл бұрын
where could i get those "cross brace wires" the ones i have came loose and got damaged
@reclinerrepairguy4155
@reclinerrepairguy4155 4 жыл бұрын
@rebellos00 - They can be ordered thru the furniture manufacturer or a upholstery supply store. Be sure to order the thickest (heaviest) gauge they offer.
@joecaron7561
@joecaron7561 5 жыл бұрын
Hi , just found your channel , great videos . I just was wondering what kind of staple gun and staple size to re staple the fabric and foam ? I am replacing my seat springs ad I only have a staple gun for finish wood work it seems kind of large for this type of repair . Thanks again for the great info .
@reclinerrepairguy4155
@reclinerrepairguy4155 5 жыл бұрын
Joe Caron - You'll want to use an upholstery stapler (they use fine staples). I use an old Duo-Fast electric upholstery stapler. Any upholstery gun (electric or air-driven) will use the proper staples. I use 3/8" for attaching fabrics and 1/2" for attaching foam. You can go with a bigger staple with foam -- 5/8" -- if you like. When stapling foam, be sure NOT to press the nose of the gun firmly against the foam. Leave a little air space, otherwise the staple will shoot thru the foam instead of attaching it.
@joecaron7561
@joecaron7561 5 жыл бұрын
@@reclinerrepairguy4155 Thanks very much for your reply . Just ordered my springs , wish me luck .
@charleskowalski7654
@charleskowalski7654 5 жыл бұрын
Very good videos, do you have a link on where to get the springs, clips, etc? I have a La-Z-Boy recliner. Many Thanks!
@reclinerrepairguy4155
@reclinerrepairguy4155 5 жыл бұрын
Charles Kowalski - La-z-boy parts are available thru the manufacturer or one of their dealers. Basically anyone who is authorized to sell and/or service their products. You'll need to have your ID tag info to place your order. Learn more about ID tags here ---> www.reclinerrepairguy.com/id_tag.htm
@transmothra
@transmothra 4 жыл бұрын
@@reclinerrepairguy4155 link is broken but I presume this is the correct URL currently: reclinerrepairguy.com/Tag
@outdoormerica
@outdoormerica 6 ай бұрын
Thank you. Just fixed a 5 year old la z boy
@reclinerrepairguy4155
@reclinerrepairguy4155 6 ай бұрын
@outdoormerica - You're welcome -- good job!
@nemea23
@nemea23 5 жыл бұрын
Thanks for the great helpful videos! I am currently working towards replacing the springs on my recliner as one broke recently, but I only want to do the middle two. Is there a way to do that that's not too much trouble, or is it just easier to do them all at once? Thanks again!
@reclinerrepairguy4155
@reclinerrepairguy4155 5 жыл бұрын
Diane Nemea Laessig - There are Repair Clips that will attach to the backside of the front seat frame rail that may be used. But you would need the right type of frame board to use them. A front seat frame rail that is thick & solid wood. Those clips can be found here --www.amazon.com/B-C-Upholstery-Spring-Repair-Bracket/dp/B07CLDVCK9 If your frame board will not allow you to fasten these clips securely, the spring tension can and will pull them loose!
@tompem
@tompem Жыл бұрын
Thank you...nice job. Wish me luck.
@Hannnnnzi
@Hannnnnzi 3 жыл бұрын
What’s the function of this wire?
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Hannnnnzi - The brace wire performs 2 functions: To keep the springs from moving side-to-side & possibly coming loose from the clips. And to tie all springs together so they move as one & provide uniform support.
@Hannnnnzi
@Hannnnnzi 3 жыл бұрын
@@reclinerrepairguy4155 there are some kind of small springs to connect the big ones available in my area. Does this setup have same function? Those small springs hooks in between the bigger springs.
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@@Hannnnnzi - Can you email a photo to pete@reclinerrepairguy.com - ?
@mbushen
@mbushen 5 жыл бұрын
Great video thank you!! Do you know where I can get instructions on how to disassemble a leather Barcalounger? All 4 spring clips are broken on front of seat. Springs seem OK.
@sidforbrains6552
@sidforbrains6552 8 ай бұрын
4 minutes in....I need a nap...how long did this take you? Very good instructional video, thank you....all you doubters out there, stop whining about upholstery costs
@SkiddingF350
@SkiddingF350 3 жыл бұрын
Thank you!!
@reclinerrepairguy4155
@reclinerrepairguy4155 3 жыл бұрын
@Verle Skidmore - You're welcome!
@johnwhitehead5457
@johnwhitehead5457 2 жыл бұрын
Will you do mine?
@LittleMissKnow
@LittleMissKnow 3 жыл бұрын
Good vide
@gabrielstein3680
@gabrielstein3680 3 жыл бұрын
It is a great
@johnspartan98
@johnspartan98 2 жыл бұрын
I would just rip all those stupid springs out and put in some more foam and a piece of 5/8 inch plywood. The foam is springy enough for most people's fat arse and the plywood will last forever. Stupid springs. Spend a 1000 bucks on a Lazy Boy and one spring broke after 8 years.......PFFFT.
How to Repair a Rocker / Recliner Base
8:02
Recliner Repair Guy
Рет қаралды 20 М.
Sitting Too Low in Your Recliner?
7:11
Recliner Repair Guy
Рет қаралды 118 М.
To Brawl AND BEYOND!
00:51
Brawl Stars
Рет қаралды 17 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Installing Recliner Mechanism Springs
10:05
Recliner Repair Guy
Рет қаралды 150 М.
How to Remove a La-z-boy Recliner Seat
9:45
Recliner Repair Guy
Рет қаралды 84 М.
Upholstery Basics: Step by Step Installing Zig Zag Springs
12:29
Fabric Farms Interiors
Рет қаралды 469 М.
How to Install Seat Spring Brace Wire
12:25
Recliner Repair Guy
Рет қаралды 5 М.
How to Replace Recliner Seat Foam
11:14
Recliner Repair Guy
Рет қаралды 106 М.
Recliner seat frame fix
3:57
Matthias random stuff
Рет қаралды 166 М.
How to fix a sagging sofa: Easy 30 mins job!
5:11
Marley M
Рет қаралды 71 М.