How To Install SMART Triple Play® Run, Brake, Turn Module

[@lonewolfstranger1776]

Also, for anyone who may be interested, their Trubeam headlight is one of the best around. I matched mine side by side against my brothers Harley Daymaker and it outshined it. The Trubeam throws out an arch of light that helps light up the sides of the road, which is extremely helpful when riding at night on back country roads. No turning into shadows and unexpected surprises. Get it, you'll love it.

[@customdynamics]

Thank you for your support, Frank! We're happy to hear you're enjoying the products - stay safe!

[@angrypatriot5392]

I have a 97 Harley Davidson Dyna Wide Glide. I bought this kit to replace the old one. Mine came with 2 extra wires with plugs. What do I do with those?

[@customdynamics]

The two smaller pigtails on the Triple Play will only be utilized with additional plug and play Custom Dynamics lighting accessories (ie saddlebag lights). If you don't have additional rear lighting accessories installed, they are not utilized.

[@infini1970]

Does this work on the newer models like the 2023 LRS?? I'm very interested in this.

[@customdynamics]

Yes, here's the link www.customdynamics.com/m8-softail-smart-triple-play

[@lonewolfstranger1776]

Love mine. Have had vehicles stop a car length to a car length and a half behind me at stops. It definitely gets your attention.

[@customdynamics]

Ride Safe, Frank!

[@Kenny-hh3zf]

The ON OFF ON switch routine to go into programing . Once you are all done programming do you return them to the OFF position or do you keep them in the ON position,

[@customdynamics]

Hi Ken! Once finished with the programming of the SMART Triple Play® module, the position of the on/off switches will be dependent on whether you want to apply the brake strobe/flash patterns to the center taillight only, rear turns only, or rear turns and center taillight (see below). Switch Functions: Switch 1 On, Switch 2 On: Strobes/Flashes on all three Rear Lights (turn signals and center light) Switch 1 On, Switch 2 Off: Strobes/Flashes on rear turn signals only Switch 1 Off, Switch 2 On: Strobes/Flashes on center light only Switch 1 Off, Switch 2 Off: No Strobes/Flashes Let us know if you have any other questions for the time being and thank you again for considering Custom Dynamics!

[@Kenny-hh3zf]

@@customdynamics WOW did not know this THANKS

[@customdynamics]

@@Kenny-hh3zf We're always happy to help, Ken! If you have any other questions, please don't hesitate to let us know! Thanks again for considering Custom Dynamics! Have a wonderful weekend!

[@susanlee8453]

Hi I have converted my 1156 rear bulb holder to 1157 on my 2013 fatboy as I have 1157 plug probeams,I have added a fly wire to the central tail light so the halo will light up as running light,if I buy the triple play,will it still work,as it sounds like I need a double play,if that makes sense, or how do I go about wiring the brake lights to it,kind regards

[@customdynamics]

Since the rear wiring has been modified from stock, it would be best for a technician to review your products and application to best advise if additional components are required and if any modification will need to be made to install. You can contact our technical team at this link: customdynamics.zendesk.com/hc/en-us/requests/new

[@franconavarro6394]

So this is what I need if I want to my single function leds to work as run/brake/turn lights?

[@customdynamics]

Yes sir! Our SMART Triple Play® module converts rear single-intensity 1156/7507 turn signals (models with a center taillight) to function as run, brake and turn with a choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake)! You can find all our SMART Triple Play® fitments, here: www.customdynamics.com/category/electrical-accessories/run-brake-turn-modules If you'd like, you can also email [e-mail] with the year/model of your bike to receive more specific product information! Thank you for considering Custom Dynamics, have a great afternoon!

[@josephfisher8501]

What if I want my turn signals to not come on with the taillight like they were originally? I just want the taillight to flash.

[@customdynamics]

Hi, Joseph! Thank you for reaching out! If you would like ONLY your center taillight to flash, then you would want to use one of our Magic Strobes Brake Light Flashers instead of the Smart Triple Play. Feel free to give us a call at 800-382-1388 and a representative can help you to find the correct fitment for your year/model! Have a great day, and Ride Safe!

[@HASSAN10321]

Hi, Just I Installed the smart triple play on my Ultra Limited 2017, I did the same steps worked fine, but my issue is no flashing during breaking even I change the nub. I also bought the Extension cables, but no clear video or manual to show how to connect them.

[@customdynamics]

Hi Hasan! We'd be happy to help - might you be able to follow-up with us via email direct ([e-mail]) or by calling us at 1-800-382-1388 so we can confirm some product information/help with troubleshooting? We look forward to hearing from you soon!

[@blskasten6638]

Why is it my tail lights do light up when pressing brake peddle? I have two small plugs remaining on it triple play but don’t see anywhere to plug them in.

[@customdynamics]

The Triple Play will convert the rear turn only functioning turn signals to stay on all the time as a running light & function as added brake lights. The two small white connectors are for added lighting accessories to also operate off the Triple Play. If you don't have any add-on Custom Dynamics lighting accessories those connectors will not be utilized.

[@AustinsMain]

When I apply the brake, the brakelight overrides the signal lights. So when I'm braking, nobody can see if I am signaling. Why is this, and how do I fix it?

[@customdynamics]

Contact our technical team to troubleshoot, Call 1-800-382-1388 or submit a contact request: www.customdynamics.com/contact

[@santhoshVnair]

Can it also strobe the front turn signals? Will this work on 2019 Ultra Limited with 114 motor with the new Boom Box?

[@customdynamics]

The SMART Triple Play® only strobes the brake function for rear fender lighting. On a 2019 Ultra Limited, you'll actually use our Magic Strobes™ Brake Light Flasher which offers the same flash/strobe patterns to the brake functioning lights on the rear fender and/or Tour Pak! We have options to flash/strobe the Tour Pak as well as rear fender lighting (i.e. center taillight, add-on saddlebag LED lights, etc.) - these modules are sold separately from one another. You can find those options for a 2019 FLHTK, here: www.customdynamics.com/amfinder/?cat=108&find=harley-davidson-2019-ultra-limited--flhtk--10657 There's a few fitment options so please feel free to call us at 1-800-382-1388 with any questions you might have!

[@aragos32727]

So I wouldn't have to convert to 1157 bullets on my rear? This will turn my 1156 into running light / brake light?

[@customdynamics]

Correct! The SMART Triple Play® module converts rear 1156 turn signals (models with a center taillight) to function as run, brake, and turn with choice of 10 user selectable built in brake light strobe/flash patterns (user can also select no strobe/flash on brake)! So, the single-intensity 1156 bulbs can provide run/brake/turn function without needing to change out the bulbs/sockets! If you have any other questions, don't hesitate to let us know! We're available by phone at 1-800-382-1388 (Normal Business Hours: 8:30am - 5:30pm EST Monday - Thursday; Closed Noon - 1pm & 9:30am - 5:30pm EST Friday; Closed Noon - 1pm) or, you can email us direct ([e-mail]). Thank you for considering Custom Dynamics! Have a wonderful week & Ride Safe!

[@aragos32727]

@@customdynamics awesome I just bought one and was trying to figure out if I need to do a conversion or not. Thank you for the response

[@customdynamics]

@@aragos32727 Happy to help! Thank you for choosing Custom Dynamics®; have a wonderful week & ride safe!