By the time you assemble this thing, winter is over.
@tripletvn2 жыл бұрын
I bought the system in summer 2018 and here I am winter 2022 still trying to figure the snowblower out... I gave up every year I tried...
@Jackson-cv7eq2 жыл бұрын
@@tripletvn want to sell?
@matthewmorse3307 Жыл бұрын
I just bought one of these for my first riding mower I’ve ever had. So literally zero experience with mowers or snowblowers and I had it installed in less than 30 minutes…. Maybe it’s not the product is all I’m saying.
@B4TS15 жыл бұрын
I installed one of these on a 2005 L120 with the electric PTO. It's now a dedicated snow blower and will never go back to a mower. I fabricated an extra support bracket to the chute control, the one bolt hold down was too flimsy. I put chains and rear weights on it as well. One complaint is the raise and lower arm. When snow builds up on the blower housing, it requires 2 hands to raise and lower the blower, stronger lift springs might be needed. I'll be installing a 4 inch electric actuator to solve this problem. The instructions were a bit vague but I took my time and put it together over the summer. So far I broke 2 shear bolts this year when I hit some icy snow and no other problems. It works for me!
@scottweisel36402 жыл бұрын
If I had the storage space, that is exactly what I would do. Have one tractor set up for mowing and another dedicated for blowing.
@patrickcapp8198 Жыл бұрын
Was it hard to fit to L120? I have a LA175 but JD says this mount is for 2014 or newer. I'd consider changing to this mount, can you leave the front part on and still fit the mower deck on? I know I'd still have to remove the drive belt module...
@B4TS1 Жыл бұрын
I have 2 videos on my channel. John Deere L120 Snow Blower and John Deere L120 Snow Blower 2 I set the tractor up as a dedicated snow blower and will never go back to a grass cutter This might help.@@patrickcapp8198
@robertwoods28272 жыл бұрын
This video was excellent. It saved me a lot of time and effort as I have severe spine and arthritic issues, it was invaluable, thank you, Bob.
@JohnDeere2 жыл бұрын
Robert, we are glad that you liked the video! Thanks for sharing. 💚💛
@mundo4722 жыл бұрын
I would have been completely lost without the help of your video and my wife. Thanks a bazillion!
@NikiDDawg3 жыл бұрын
Thanks for this. So complicated and beyond what I'm willing to do. Convinced me to NOT get a JD Tractor and snow blower. I'll stick to my regular snow blower and mower setup.
@scottweisel36402 жыл бұрын
If you think this one sucks, you should see the install for the Cub Cadet 3-stage blower. I looked this up to see if the JD was easier. It is, but still not simple or easy.
@supremeoppressor Жыл бұрын
Looks super simple to install to me. They covered everything in a video less than 4 minutes long.
@matthewmorse3307 Жыл бұрын
Dude what are you talking about too complicated? It’s 6 bolts and a couple clips. This is a comprehensive video covered in 4 minutes. The operations of the machine itself are more complicated to figure out than this install
@KyleMart2 жыл бұрын
Was considering getting this for my John Deere, but I'm too lazy to do all this work.
@matthewmorse3307 Жыл бұрын
It’s 6 bolts and a few freakin clips to get in place…. Everything is covered in a 4 minute video…. Jesus Christ lol
@erswnn Жыл бұрын
And watch out for a twist in the belt. It won't seat correctly into the pulley at the pulley module. It's hard to spot if you're not experienced with the problem. I had to have a JD mechanic come out....this was after I pulled the module and took it to the dealer who sold me the blower. Even they missed it since it was not installed. They also found the wrong return spring on the module. I have my concerns with quality control at John Deere.
@snwbm3 жыл бұрын
This is nuts. Glad I watched this video. I'll look for a different solution.
@therookienomore882 жыл бұрын
It's carriage bolts, too.
@TheDuttonExperience11 ай бұрын
So this wont work with an s130 without burning up the trans? Good thing i just dropped 2500 on everything. 😊
@shunnjohn5 ай бұрын
Would you have an equivalent removal video for a 44 inch Snow blower on an S240 by chance? The operator manual is not the best to follow
@michelesadler1792 Жыл бұрын
not detailed enough to know if the belt is correctly running around the small pullies correctly, no diagram showing the way they should run. \
@JohnDeere Жыл бұрын
Hi, Michele! We're sorry for any confusion. If you are having issues with your belt, we recommend taking a look at your Operator's Manual in the Troubleshooting section for some possible solutions. If you're still having trouble after doing this, please reach out to your local dealer for assistance. You can find your nearest dealer at Deere.com/Dealer.
@bryanpaul878217 күн бұрын
I’ve got a new s240 is this the same design? First timer trying not to waste my money
@JohnDeere16 күн бұрын
We appreciate you checking, Bryan! While the trade dress of the 44-in. Snow Blower may have changed, we can confirm this attachment is compatible with your S240 Lawn Tractor. You can find the 44-in. Snow Blower for the S100 and S200 Series here: spr.ly/6055UB0nx. If you're ready to purchase, simply click on the Buy Online button to get started. We hope to see you running with us this winter!
@JimBroten10 ай бұрын
Just spent 10 grand on a new tractor and bought the 44 inch blower for my D140 now it says I need additional brackets thought the kit was complete before I spend more money John Deere can come take it all back
@JohnDeere10 ай бұрын
We're sorry to hear about your experience with the snowblower attachment for your D140 Lawn Tractor. If you would like to discuss this with us further, our Enterprise Contact Center for John Deere Parts team would be happy to assist you. Our team is out for the night, but you can reach them between the hours of 7am - 7pm CST Monday - Friday at 1-866-993-3373.
@localrvsmyboatsforsale6522 Жыл бұрын
Will this fit a 200 series 265 unit. Had a 47" on it originally with front manual lift for deck.
@RandyH-o6l10 ай бұрын
Awesome! Thank you
@WranglerRunner13 жыл бұрын
Does John Deere have a video for the install of the weather enclosure for the 100 series tractors? Seems a lot of people would find this helpful as it goes hand in hand with the snow blower attachment.
@thedoctor1542 жыл бұрын
Very easy to install both together. All the pieces fit well together.
@WranglerRunner12 жыл бұрын
@@thedoctor154 thanks, I went ahead and purchased a Berco cab for around the same coast due to the fact that the JD was too tall for my small garage.
@marcbond46835 жыл бұрын
This video does not show how to tension the belt after placing the snowblower on the front mounts. The instruction booklet does not provide this information either.
@stepfour4 жыл бұрын
The robot lady said it's a low tension system.. don't be alarmed by all that slack in the belt... that's what she said.
@simonmarx344 жыл бұрын
Its tensioned by the engage lever
@matthewmorse3307 Жыл бұрын
@@stepfour yeah, but I have legit like 18” - 24” of slack. Surely that’s not normal
@stepfour Жыл бұрын
@@matthewmorse3307 oh, I know...
@trentshackelford198710 ай бұрын
They also forgot to show installation of the belt on the drive pulley. My new snowblower pulley system came with the belt crossed top to bottom. Poor quality control.
@trentshackelford198710 ай бұрын
Lots of comments on how hard this is. Took me maybe two hours for assembly and install, but over an hour of that was just finding the bits and assembling them. It’s not going to be that hard to take on and off now.
@shea60715 жыл бұрын
Real easy and uncomplicated huh....for all the money you spend engineer something better with a drive up hook up.
@kartboarder22g174 жыл бұрын
Yea I agree, might as well just buy a seperate unit for snowblowing and save yourself a couple hours a year setting this up.
@bowtieboy572bb4 жыл бұрын
Looks like I'm hunting for a late 90s Deere with hydraulics.
@justadbeer3 жыл бұрын
@@kokokyoushi - Removing or installing the mower deck takes all of 5 minutes. I'm not sure what all the fuss and whining is about, but it is obviously coming from people that don't have one. This snow blower really is a breeze to install and I can do mine in about 30 minutes or so. Uncrating it and assembly when you first get it will add some time to that, but once that's done, you're good to go. This is a reasonably priced unit ($1,400) for what it's capable of. Someone mentioned engineering a drive hook-up. As someone that already owns a Kubota (with the optional mid PTO), I can tell you that that is an EXPENSIVE ad on, not to mention the 6k cost for the snow blower, which also must have a sub-frame installed every year just as this was.
@davestrongman95193 жыл бұрын
I have an LA145 and I just bought a snowblower attachment for it but it doesn’t look like this snowblower. Trying to find a video to help me hook it up.
@JohnDeere3 жыл бұрын
Thanks for reaching out, dave strongman. We do not currently have a video outlining the installation of a snow blower on the LA145 Lawn Tractor. We recommend contacting your local John Deere dealer for assistance with the installation. If needed, you can find your local dealer at Deere.com/Dealer.
@charlieminer52215 жыл бұрын
I have a D155 and just bought a 44" snowblower for it My local dealership is installing it for me Only one question and this point How long does it take to put this one starting with the very beginning?
@JohnDeere5 жыл бұрын
Thanks for your question, Charlie. Your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer here: bit.ly/2V3skCv.
@massfrog5 жыл бұрын
Seems a lot more complicated than 2015 44" snowblower attachment on mine. Is this there newer version?
@JohnDeere5 жыл бұрын
Massfrog, thanks for your interest. Yes, this would be an updated version compared to your 2015 unit. We released an updated 44” Snow Blower attachment with the New E100 Series Lawn Tractors in 2018.
@ryanbrown82463 жыл бұрын
@@JohnDeere Is it backwards compatible? I have a 2015 D140 will my blower fit a 2021 S240?
@JohnDeere3 жыл бұрын
Thanks for asking, Ryan. There were Snow Blowers specific to the 2015 and prior model year D105 Lawn Tractors, which would not be compatible with your S240. We recommend confirming your current Snow Blower's part number and compatibility with your local dealer. If needed, you can find your nearest dealer and their contact information at Deere.com/Dealer. We hope this helps!
@brodieroomojo2 жыл бұрын
dont buy it. get another brand
@Robphoto37 Жыл бұрын
What is the overall width and length of this lawn tractor with the snow blower attached?
@JohnDeere Жыл бұрын
Thanks for the question, Robphoto37. The width of the S100 Series Lawn Tractors with the Snow Blower attached is 46.6-in and the length with the suitcase weights is 105.7-in. For more information we recommend contacting your local dealer. You can find your local dealer here: Deere.com/Dealer.
@Robphoto37 Жыл бұрын
@@JohnDeere I have but nobody got back to me. Thanks for the info
@Satvik882 жыл бұрын
Can someone suggest which lawn tractor better to do lawn mowing and snow cleaning along with all accessories required
@JohnDeere2 жыл бұрын
Sensible Satvik, we're glad to hear you are looking at our Lawn Tractors. Choosing the right equipment for your needs can be a challenge, so you might want to start with our Product Selector Tool here: bit.ly/3ymEfQY. You can utilize the filters found on the left side of the page to find a Lawn Tractor to fit your specific needs. Your local John Deere dealership would also be happy to help you to answer any questions you may have about our wide variety of Lawn Tractors. If needed, you can find your local dealer at Deere.com/Dealer.
@brodieroomojo2 жыл бұрын
anything but a john deere
@tripletvn2 жыл бұрын
I was able to do mostly everything BUT the driver belt! I do not see when or how to put the belt around the pulley right under the tractor - not the one in the snowblower housing, nor the two in the blower deck that goes underneath the tractor. None of the pulleys can move and I am weak so I don't think pulling the belt works for me. I am debating un-bolting the driver module and redo it. Anyone that could help SOS? I have 17-18 inches of snow blocking my 200-ft driveway and I am house trapped right now. Thanks.
@tripletvn2 жыл бұрын
I got it from the manual, from the right side there is a tension release arm that could move. The video failed to show this.
@JohnDeere2 жыл бұрын
Thanks for the feedback, Trang Thai! Please check Section 30 - Installing - Installing Belt Drive Module in the Operator's Manual for the 44 Inch Snow Blower here: bit.ly/3IdX4t9. If this does not help, your local dealer would be another resource for assistance with installing attachments. Your nearest dealer can be located using bit.ly/3rqTCVj. We hope this clears up the installation process.
@tripletvn2 жыл бұрын
@@JohnDeere Yes, that was exactly what I was referring to from my physical manual book, but the wording with little to no figure it was not as easy as the video (not that the illustrations in the manual book help, I think they are poorly drawn). It is also the you-know-it-or-you-don't kind of thing, so it is easy now. I am also having issues with really hard if not impossible to squeeze the lift handle to raise/ drop the snowblower (small Asian woman with smaller hand) so I had to operate it with the snowblower on the ground 100% of the time, which was super inefficient, and I would love to see more explanation on the tension of that part. I also found from KZbin that some people install electric winch for about $150 diy so I think that would be a good solution for me compared to doing it manually.
@cptnbillyjohnstone51011 ай бұрын
Did you get your belt drive module figured out? I'm looking for that module if you might know where I could find one. Our son bought this package deal from Lowes several years ago, but never used the snow blower set up and now we find the belt drive module not in the package. What a pain.
@freespirit7475 Жыл бұрын
i can fig it out but sum may not, you did not show installing the belt on the pto drive pulley .
@bronwynmcsorley3069 Жыл бұрын
This is exactly what I am here trying to figure out. The instructions in the manual are terrible!! Did you figure it out
@donaldobrien45933 жыл бұрын
I have a JD D130 tractor I recently purchased a nice use MO44SBHVEM080426 snow blower attachment. I'm not sure if I purchased the correct blower? I can't find any videos showing the installation methods for this blower. Does anyone know if I have the correct snow blower Thanks for any help Don
@JohnDeere3 жыл бұрын
Thanks for your purchase, Donald O'Brien. Please consult your local dealer for further assistance. You can find their information at dealerlocator.deere.com.
@amoryerenhouse5535 Жыл бұрын
Will this fit a John Deere S220?
@JohnDeere Жыл бұрын
Thanks for the question, Amory. Yes, the 44-inch Snow Blower will fit a S220 Lawn Tractor. You can find parts and attachments for your unit here: spr.ly/6053PpZsZ. Your local dealer is a great resource to confirm part numbers and help order. If needed, you can find contact information for your nearest dealer here: spr.ly/6054PpZsw.
@cptnbillyjohnstone51011 ай бұрын
Was wondering if you bought this 44 inch snow blower? Did it come with all the parts shown in the JD video? Mine is missing the belt drive module and you can;t just get that part, but have to buy all the individual pieces that make up this module and assemble them. Cost is $1700 Canadian to buy all the parts. Wondering if you got the belt drive module as shown in video. Bill
@amoryerenhouse553511 ай бұрын
@@cptnbillyjohnstone510 I havent bought it yet
@trentshackelford198710 ай бұрын
Mine came with it, but factory installed the belt incorrectly
@Ghillie30m14 жыл бұрын
I have an E-130 22hp will the snowblower attachment work on it? If so where can I buy this set up in the video. Much appreciated
@JohnDeere4 жыл бұрын
Thanks for your interest, Ghillie30m1. We recommend contacting your local dealer for questions you may have regarding the compatible attachments that are available for your E130 Lawn Tractor. You can find your local dealer at dealerlocator.deere.com. You can also view the Attachments & Implements Brochure for our riding lawn equipment here: bit.ly/33KUnNf.
@jeffh.9620 Жыл бұрын
Mine does not have that front pulley u bolt guide and can,t find where to buy one. Called JD and they had no idea just said all the parts should be there and had no part number. belt comes off about every 40 ft. It,s in the video JD
@JohnDeere Жыл бұрын
We're sorry to hear that you had this experience with your snow blower attachment, Jeff. Please give the John Deere Enterprise Contact Center a call at 1-800-537-8233 for further assistance with your missing parts. You can also speak with your local John Deere dealership about any missing parts. If needed, you can find your local dealer at Deere.com/Dealer.
@cptnbillyjohnstone51011 ай бұрын
Did you ever get your snow blower working properly. Ours came without the belt drive module, unfortunately that was several years ago and we haven't wanted to blow snow until this winter and no belt module. I'm trying to find one. Thanks for any comments, Bill
@jeffh.962011 ай бұрын
@@cptnbillyjohnstone510 Yes i did find a belt guide from john deer about 50.00 bucks as i remember. it,s for the front pulley it,s a big u bolt about 8 inches long and 1/4 in thick that just keeps the belt from coming off. it,s been a long time and i don,t recall how i got the part number, not sure what the belt module is your talking about
@cptnbillyjohnstone51011 ай бұрын
The belt module is the metal frame that hangs under the tractor and has 2 pulleys that get your power from the tractor to the snow blower. We never got it when we bought the tractor several years ago and have never tried to blow snow until this winter and no belt drive, so no go. Where are you located? I'm in Winnipeg if you have any ideas on where to find this module. Bill@@jeffh.9620
@timlancaster96812 жыл бұрын
Will this attachment fit an e100?
@JohnDeere2 жыл бұрын
Thanks for the question, Tim. Yes, this 44 inch snow blower attachment is compatible with the E100 Lawn Tractor. We recommend contacting your local dealer if you need assistance locating and ordering parts for your unit. If needed, you can find your local dealer at Deere.com/Dealer. We hope this helps.
@WranglerRunner12 жыл бұрын
Now do a video of LP68150, electric lift kit install.
@anthonyrajchel59845 жыл бұрын
What size Carriage Bolts and nuts are used to attach the Front Hitch Assembly??
@JohnDeere5 жыл бұрын
Anthony, you can find a full break down of the parts used in the hitch linkage of this 44" Snowblower attachment in our online Parts Catalog here: bit.ly/2qFuGO4. You can also find a full list of parts included with the 44" Snowblower in "Section 20 - Assembly" of the attachment's Operator's Manual here: bit.ly/33ILXVq. We hope this helps!
@tinpony94244 жыл бұрын
@@JohnDeere the second link in your reply was very helpful for the blower I have. The local JD dealer was also helpful in providing a complete exploded view and parts number list for me.
@Diycanada560 Жыл бұрын
So we cannot have both mower and snow blower, we need to switch, install and reinstall. I would rather keep my 400$ snow removal contract
@UncleAL2006 Жыл бұрын
I bought 44 inch snow blower for my John Deere s130 only to find out that it would burn up my transmission according to the expert at the John Deere store.
@cptnbillyjohnstone51011 ай бұрын
What did you do with your blower. When you bought this, did it come with all the parts shown in this youtube video? I am missing the belt drive module and was wondering if you got one with your new purchase. Bill
@liamceh86973 жыл бұрын
HI is John working today?
@MrCaleb28353 жыл бұрын
yes
@brodieroomojo2 жыл бұрын
nope, only here to steal money not work. mine is 3 days old and dead in the driveway
@seanm84345 жыл бұрын
No instructions on how to attach it to the pto
@JohnDeere5 жыл бұрын
Thanks for reaching out, Edward. For full installation instructions, including how to attach to the PTO, we recommend taking a look at "Section 30 - Installing" in the attachment's Operator's Manual here: bit.ly/33CXF3v.
@tripletvn2 жыл бұрын
@@JohnDeere Error at the moment!
@TheOGofSki3 жыл бұрын
How do I release the belt tension when removing the blower attachment? I have an E170 with electric PTO. Thanks.
@TheOGofSki3 жыл бұрын
Fiddled around and figured out that you have to manually pull to large black tension spring on right side of pulley assembly to loosen enough slack on the belt to slide it off the PTO. For both installation and removal this is a pretty big step to omit!
@Steve_Edberg3 жыл бұрын
Is that front hitch included with the snowblower or do you have to buy thay separate too??
@JohnDeere3 жыл бұрын
Thanks for the question, Steve. The 44 in. 100 Series Snow Blower comes equipped with everything you need to install the attachment to your unit. We recommend consulting your local John Deere dealer for further questions regarding attachments for your unit. If needed, you can find your local dealer at Deere.com/Dealer. We hope this helps!
@supremeoppressor Жыл бұрын
Tire chains and weights are separate but necessary.
@MRIDNETGUY20043 жыл бұрын
At. This point I would honestly get a x700 series.
@craigvantine20625 жыл бұрын
Does anyone know if the 100 series snow blower will fit on the 300 series?
@JohnDeere5 жыл бұрын
Thanks for asking, Craig. The Snow Blower attachment featured in this video (BM26888) is only compatible with our 100 Series and S240 Lawn Tractors. You may be able to locate the Snow Blower attachment compatible with your unit by searching your model number in our online Parts Catalog here: bit.ly/36O6jOD. The Snow Blower attachment compatible with your X300 Series Lawn Tractor may vary depending on the model, model year, deck size, and serial number break, so we recommend reaching out to your local dealer to confirm the correct Snow Blower before purchasing. If needed, you can find their contact information here: bit.ly/2WVxSB5.
@Ghillie30m13 жыл бұрын
Where do I buy this exact model of snowblower?
@JohnDeere3 жыл бұрын
Thanks for the question, Ghillie30m1. You can look up and order many attachments online at Deere.com/Parts. Simply enter your unit's model number and view the corresponding Parts Catalog. Your local dealer would also be happy to assist you with locating and ordering attachments for your unit. If needed, you can find your local dealer at dealerlocator.deere.com. We hope this helps!
@brodieroomojo2 жыл бұрын
any angry yard sale should have them brand new with only a few hammer dents and urine stains
@brodieroomojo2 жыл бұрын
by the quality if mine id say at the dollar store
@andygoggin47624 жыл бұрын
Anyone have a tip for removing the metal bumper? The clips are locking it in and preventing removal.
@JohnDeere4 жыл бұрын
Andy, your local John Deere dealer is your best resource for technical questions like this one. You can find your closest dealer here: bit.ly/33YYpjT.
@joshfrentzel61624 жыл бұрын
Ya push the clips in with a screwdriver after you pull the pin and slide it out.
@andygoggin47624 жыл бұрын
Josh Frentzel Finally managed it. Thanks mate.
@tripletvn4 жыл бұрын
@@andygoggin4762 I also struggled with the bumper longer than I expected :)
@andygoggin47624 жыл бұрын
Trang Thai it sure wasn’t as simple as the robot in the video made it look. Mrs. Champ pitched in and the bumper slid right out. Hard to do solo!
@brodieroomojo2 жыл бұрын
i just bought a 160 and all the snowblower equip. well im 4.5 hours with 2 people into it and im just about halfway with assembly. the instructions are terrible the parts barely fit together and none of the hardware is labeled. 1 more day than its all going back!!!!
@JohnDeere2 жыл бұрын
We're so sorry to hear that you have been experiencing difficulty assembling the snow blower equipment for your unit. Your local John Deere dealer may be able to provide some guidance for you. If needed, you can find your closest dealer at Deere.com/Dealer. Simply enter your location and then select what type of equipment you are looking for. We hope this helps.
@brodieroomojo2 жыл бұрын
@@JohnDeere what im looking for? are you a bot? i bought what i was looking for and it doesnt work. i assembled it and it ran for an hour now the tractor is dead and the tractor itself was assembled by john deere. i guess what im looking for is the hole in my head that made me think john deere was still quality
@matthewmorse3307 Жыл бұрын
This is my first riding mower so no experience with any mowers or snowblowers ever and I installed mine by myself in less than 30 minutes in a very dimly lit garage with main source of light being a flashlight. Just saying, it may not be the product if it took you and another person several hours to put like 6 bolts in…. As far as quality I can’t speak on yet. But installation was crazy easy.
@cptnbillyjohnstone51011 ай бұрын
Was wondering if you ever got that snow blower working? I can't finish mine because there was no belt drive module in the package my son got. Trying to locate one of those and that is another crazy world trying to deal with John Deere. My son bought this unit from Lowes and never needed the snow blower, so we didn't discover the missing part until 4 years later, and of course no one has it now. Any chance you might know of a place to get that belt drive module? Bill
@brodieroomojo11 ай бұрын
i returned the whole unit and bought directly from a john deere dealership@@cptnbillyjohnstone510
@peterdeaf93305 жыл бұрын
How much all tractor lawn and snowblower?
@JohnDeere5 жыл бұрын
Peter, thanks for your interest. Please contact your local John Deere dealership for pricing information as prices are set by our individual dealers. If needed, you can find your local dealer here: bit.ly/2PX9wng.
@brodieroomojo2 жыл бұрын
dont get it, you will regret it
@tazzharm3 жыл бұрын
so after we bought the snow blower from home depot, not only was it missing a couple of bolts the handle was broken during shipping and home depot and local dealer is blaming each other. got to the drive belt module install and my unit does not have the holes for the the unit to bolt into , Nice.....as I am reading the instructions in fine print it says if your frame doesn't have the holes you will need a left and right bracket which are sold individually , $140 cad each plus taxes. I have a D140 and the description is for ALL 100 models, that is incorrect. buyer beware. tractor purchased in 2017 and now I have to decide do I drill the holes or send unit back. don't buy anything for your john deere unless you 100% it will fit.
@JohnDeere3 жыл бұрын
We apologize for this experience. If you would like to discuss this with us further, please reach out to our Enterprise Contact Center for Residential, Golf, and Turf products at 1-800-537-8233. You can also submit a help case here: ccms.deere.com/prweb/MyJohnDeereAuth?pyActivity=Deere-CCMS-Case-CM-Work-GSC.SnapStartCreateCase&MashUp=R4+Turf. Our Enterprise Contact Center is open from 7am - 5pm CST Monday - Friday, and 8am - 4:30pm Saturday. We hope this helps.
@cptnbillyjohnstone51011 ай бұрын
hello Tazzman. Did you solve this dilemma with your snow blower. My son bought an E170 4 years ago and never used the snow blower attachment. I wanted to use it this winter, but he never received the belt drive module in his package, so JD tells me now that they don't make that part, you have to buy every individual piece and assemble your own belt drive module. I am desparately searching for a belt drive module, if you have any ideas on where I might find one. Thanks for your time.@@JohnDeere
@cptnbillyjohnstone51011 ай бұрын
@cptnbillyjohnstone510 1 day ago hello Tazzman. Did you solve this dilemma with your snow blower. My son bought an E170 4 years ago and never used the snow blower attachment. I wanted to use it this winter, but he never received the belt drive module in his package, so JD tells me now that they don't make that part, you have to buy every individual piece and assemble your own belt drive module. I am desparately searching for a belt drive module, if you have any ideas on where I might find one. Thanks for your time
@tazzharm11 ай бұрын
we ended up returning it and purchased a mahindra Emax 20 with a bunch of addons....lawn tractor still working as it should .@@cptnbillyjohnstone510
@shivpatel99235 жыл бұрын
Quick question, Can this be installed onto a E150 lawnmower?
@JohnDeere5 жыл бұрын
Yes this 44” Snow Blower attachment is compatible with the E150 Lawn Tractor, Shiv. You can learn more about the 44” Snow Blower and other attachments here: bit.ly/2K6R7nP.
@JonnyBlazeTCB5 жыл бұрын
Whats the part number for the belt?
@JohnDeere5 жыл бұрын
Hi Johnny, you can find this information in the Parts Catalog for the Snow Blower here: bit.ly/2MxDtKo. Your local dealer can also assist in locating and ordering parts for your unit. If needed, you can find your local dealer here: bit.ly/2My7TMK.
@nodak81 Жыл бұрын
Don't see why this simple attachment should cost more than the tractor.
@joe08132 жыл бұрын
Oooof that looks like a massive pain
@Carta87Blanca3 жыл бұрын
There’s more to the belt drive module that should have been covered buying one of these I can say the directions are terrible and none of the bags I received indicated what hardware went where luckily my neighbor gave me a hand
@eriktarver20874 жыл бұрын
Disappointed to say the least. This was the first lawn tractor I ever (E-180) snowblower attachment has the worst instruction manual I've ever seen, the handle to raise the blower is awkward and difficult to lift. I'll never buy another one.
@tomf99288 ай бұрын
Deere over complicates, attachments i own 3 different models and yet my 73 wheelhorse is so much easier
@wvdiggingroots Жыл бұрын
Wow I wish. I got a homemade snowplow for my s240. I get on off mower a lot.
@larrygunter26753 жыл бұрын
I have a 2015 JD X324 all wheel steer. The people at JD that designed the deck with J-Bolts have NEVER tried to put a deck on or take it off. They should have been working in a candy store. Stupid people. The same with the bagger. My last JD. I'll find a K-Mart store and get a better product.
@wondereagle Жыл бұрын
I’m tired just watching this…
@murd777Ай бұрын
I'd rather buy a Honda HSS1332ATD snowblower
@itsasinine33372 жыл бұрын
this is too much work to put on and take off twice a year.
@todds59562 жыл бұрын
What a pain!
@wtfpwnman2 жыл бұрын
This is hilariously too much effort.
@glenncarruthers33557 ай бұрын
Completely useless. You never show how the drive belts are aligned around the the idler pulleys etc.
@JimBroten10 ай бұрын
Do not buy this blower better options for the money
@JimBroten10 ай бұрын
Dont buy a John Deere everything has become more complicated and cheap had 3 no more