How To Install Toyota Prius Interior LED - 4th Gen (2016+)

[@adlar2005]

I recently purchased the same kit about 3 weeks ago. What an amazing difference, I highly recommended it and I am extremely impressed with the quality of the bulbs. Note: The map light fixture is the hardest and the most delicate of the replacements. I only struggled because I didn't have this video to reference. Thanks for uploading especially for future PrecisionLED customers.

[@danpawlowski]

where i can buy this kit? great video btw!

[@PrecisionLED]

@@danpawlowski Thanks! Here is the link: goo.gl/vXz5tu

[@PrecisionLED]

Thank you for the positive feedback. We appreciate your business!

[@davidfigueroa6733]

Thanks Precision LED for making this video. The instructions are very detailed and were helpful for me to swap out nearly all of the incandescent light bulbs for LEDs, including the rear amber turn lights. The map light was the most challenging. My Prius has the SOS emergency button too, however, I was able to remove the housing and the lens as described in the video. I'll also be swapping out the front turn signal lights too, but the passenger side is proving harder for me to get to... Also, LEDs are also vastly more energy efficient than incandescents, and LEDs also help reduce the load on your vehicle's battery.

[@Synomenon]

Is the reverse light removed the same way for the Prius Prime?

[@maggie0285]

Thanks a million. I couldn't get the bulb out so I used the tape and it worked. I have blue LED in mine. Your video is the best.

[@coloradoboo1071]

Great video, I just got mine done. My map light assembly was the hardest and I ended up starting to remove the gray plastic from the bottom right which helped that top tab pop free. No room to get the pry tool up on the top of mine which has the Toyota emergency call system.

[@kenspiro9816]

Great video but I am trying to replace the map light switch. I turns on if I manually turn it on but not in the middle position when the doors are open (until recently the lights would flicker if I pressed on the switch with the doors open and the switch in the middle poistion). Have you ever been able to access the map light switch and find a replacement?

[@gregorycotter6461]

What about the lift back? A light so when it's in the open position there is light shinning down into the cargo area.

[@heybulldog137]

Thats not a factory option. Doesn't come that way, unfortunately.

[@kintamanijp8509]

great tutorial bro!! I have this 4th Prius and was lazy to do it but with your video it will be a piece of cake!! Could you please meke e video about Interior decoration light s for this car?? That would be awesome !! Thanks again!! Respect from Brazil!! :)

[@MotivatorG]

Thanks for the lightbulb extraction trick!

[@PrecisionLED]

Any time!

[@Аксель-л7х]

Thanx for a video! Nice trick with a ductape and original bulb, thanx a lot!

[@season387]

thanks for the video. I got a set with the memorial day discount!

[@PrecisionLED]

Thank you so much for choosing PrecisionLED! We hope your install goes smoothly!

[@pbasch]

I'm really impressed with the bulbs and the instructions. It was amazingly easy! I did have trouble with the door (or "courtesy" lights, because they were a bit of a tight fit. Also, they seem to come out differently on the driver side and the passenger side. But with some determination, it all got done. Even the very tricky map light! I was worried about breaking those little plastic pieces, but it all worked out well! And the light is so much whiter and brighter! Thanks. EDIT: there is one downside -- the vanity lights above the sunshades don't seem to fit as tightly as the originals. If I let the sunshade snap back into place, they slap the ceiling a bit hard and the lamps have popped out, and I have to fish for the loose bulb in that cavity. Annoying! So now I make sure to hold the sunshade when stowing them, so they don't snap back so hard.

[@jiqi963]

Do those white led bulbs too bright?

[@heybulldog137]

​@@jiqi963 they bright asf

[@paulopanayotis4061]

Hi. Excelent video but when I click the product link apears a 2010/2015 link. I have a 4th generation 2017 Prius. Could you please send me the correct link? Actually I live in Brazil and I would like to order the correct Kit LED bulbs ok?

[@sathaasivamnandakumar7576]

How to replace the license plate light?

[@davisonthomas4697]

What's the difference between the standard and premium kit?

[@PrecisionLED]

The new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. And of course, all of our interior 5730 LEDs are backed by our lifetime warranty.

[@radreviewz9482]

Does this use less battery?

[@PrecisionLED]

Yes, the LEDs typically use less battery and last longer than halogen bulbs!

[@ramos42388]

Are there bulbs for brake lights just bought a 2021 prius prime limited wanted to put brake blinking lights in?

[@PrecisionLED]

Unfortunately we do not advertise brake lights as they may hyper flash when ignited.

[@ramos42388]

@@PrecisionLED nothing a 7 ohm resistor can't change.

[@PrecisionLED]

Which brake lights specifically were you interested in replacing? For the two on the sides you would need two T15 bulbs, which you can find here: www.precisionled.com/shop-by-led/automotive-leds/t15-wedge-led.html Feel free to reach out to us directly at [e-mail]!

[@ramos42388]

@@PrecisionLED found out the brake light assembly has to be changed anyways no led switch over that sucks.

[@rottiuree]

This is an excellent tutorial. LED's do make a difference. Don't know why the new cars don't have them.. Having a hard time with the map light. Was not able to remove the clear lens for fear of breaking the tabs. Any other suggestions? Purchased some special plastic wedge tools but still not able to remove the clear plastic. Almost removed the entire housing.

[@PrecisionLED]

Yes, it is entirely understandable, as we had trouble with the map lights as well. However, if you just follow the tips in the tutorial, you should be fine. You would have to remove the entire fixture rather than just removing the front lens covers.

[@divefraggle]

Just finished this on a 2021 Prius Prime. Not too bad.

[@abdulshakoorrahimi3032]

Thanks

[@pete24p]

do u have a premium kit or a link to upgraded led rear lights and fog light upgrade kit as well?? please link me up if you could i would love to upgrade the lighting on my family ride!! thanks.. -p3t3r

[@PrecisionLED]

Of course, I have linked the proper fog and reverse LED kits for the Prius below for your convenience. Thanks for tuning in! Fogs: www.precisionled.com/premium-h11-cree-led-foglights.html Reverse: www.precisionled.com/shop-by-vehicle/toyota-prius-led-backup-reverse-lights-2010-present-2.html

[@mikehorumon3000]

Can you please tell me which Color Temperature matches the factory LEDs over the driver and passenger footwells on a 2021 Prius Prime Limited?

[@PrecisionLED]

Hi, we would recommend the 6000k crystal white color temperature for the closest match for your stock LEDs.

[@mikehorumon3000]

@@PrecisionLED thank you! Buying now!

[@808odi]

I went to your website and tried to purchase some for my 2018 Prius. But you guys don’t have an option for my year it stops at 2015

[@PrecisionLED]

Here is the correct kit for your 2018 Prius: www.precisionled.com/toyota-prius-premium-led-interior-package-2016-present.html

[@annabailey2206]

@@PrecisionLED any more leds for the 2018?

[@PrecisionLED]

@@annabailey2206 You can add additional lights to the base kit using the drop down menu when you go to purchase. Here are direct links for your convenience: interior kit: www.precisionled.com/toyota-prius-premium-led-interior-package-2016-present.html reverse lights: www.precisionled.com/toyota-prius-led-backup-reverse-lights-2010-present-1.html license plate lights: www.precisionled.com/toyota-prius-led-license-plate-lights-2010-present.html trunk strip: www.precisionled.com/toyota-prius-led-trunk-strip-light-2016-present.html

[@adambrantner6567]

Trying to purchase for my 18 Prius and it does not show up on your site. Is that just temporary? Thank you.

[@PrecisionLED]

We apologize for that! The link should be working now!

[@hafizreazuddin]

i try to buy your LED but there is tow option 1/ Cool LED and 2/ Crystal LED what is different?? I need to know winch one you guys use in your car??

[@PrecisionLED]

The 6000K Crystal White color is used in the video. Bulb color temperature is ultimately personal preference. The 6000K projects a warmer white color, as opposed to the 8000K, which projects a cooler white.

[@hotrodmercury3941]

Great for a camper build.

[@PrecisionLED]

It sure is!

[@misterx6802]

Tyvm

[@matgdamon]

Does this work for a 2018 prius prime

[@PrecisionLED]

Yes the package listed in the description box and the installation process is compatible with your 2018 Prius Prime!

[@riceburner4747]

Do u sell led tools u used? If not, where can i get them?

[@PrecisionLED]

Yes, you can find our trim tools here: www.precisionled.com/professional-trim-tool-set-3.html

[@TheDjelements]

what about the lights pointing on the floor mats? you didn't do those.

[@PrecisionLED]

These lights would actually be factory LEDs.

[@cidpusa700]

Amazing Awesome Impressive

[@PrecisionLED]

Thank you!

[@StarryTemplar]

Is the video COOL light or Crystal light???

[@PrecisionLED]

The products installed are the Premium 8000K cool white color temperature.

[@adityakuroodi6034]

Would this work for a Prius Prime Gen4 as well?

[@PrecisionLED]

Yes, the installation process for your Prius Prime would be identical to as shown in the video.

[@daveh5625]

Great video... thanks. Dave

[@PrecisionLED]

Thanks for watching!

[@SkippyPB.]

What about the rear turn signals?

[@PrecisionLED]

At the moment, we do not advertise turn signal lights as they would hyper flash when ignited. However, we are currently testing some lights, and will likely be adding the item to our inventory, if all goes well, by the end of the year. I would check back in a couple months.

[@nickhahn5412]

Do the reverse lights throw any codes?

[@PrecisionLED]

No, we only sell high quality Canbus LEDs to ensure you do not experience any dash errors, flickering, or other issues with your LEDs.

[@Xzen808]

Thank you for the awesome video

[@PrecisionLED]

Thank you for watching!

[@petersteiner349]

great presentation, helped very much :)

[@PrecisionLED]

Thank you for tuning in!

[@carsandcountries4898]

Model no for reverse and indicator bulbs please

[@PrecisionLED]

Hi! We used a T10 bulb. Thanks for watching!

[@lenarguerra7203]

Great video!!! Keep it up.

[@PrecisionLED]

Thank you! We definitely will!

[@orhun2049]

What about footwell and glovebox lights??

[@PrecisionLED]

The footwell and glovebox lights are factory LED, which cannot be replaced as they are soldered to a chip and board.