How To Install Your Switch Panel on 2023 Colorado/Canyon for Lights and Accessories

Installing a Lasfit 8gang switch panel on my 2023 chevy colorado z71 overland/offroad rig! Lasfit is here for all your lighting and electrical needs ! This product makes it SUPER easy to wire all your accessories. All you need is a power and ground wires and the lasfit switch panel doses the rest !
Lasfit 8 gang switch panel-
www.amazon.com...
💥Coupon code💥- SW08L003
🛠️ Build List🛠️
@levelupsuspension 2inch lift and shock guards
@magnaflow overland series exhaust
@dv8offroad bed rack
@Ragofabrications fire extinguishers mount
@dv8offroad traction boards
@roam vagabond rooftop tent
@Roam awning
@Methodracewheels 305
@falkentire 35x11.50 wildpeak rt’s
@Coloradocanyonenthusiasts ditch light brackets
@Ridgid spot light ditch lights
@lasfit.offroad 8 gang switch panel
@supareeofficialus rock lights
Instagram ​⁠@downtimelost
Tik tok @downtimelost
#chevycoloradoz71 #chevytrucks #chevycolorado #chevycoloradozr2 #toyotatacoma #Tacoma #overland #overlanding #overlandingbuild #overland4x4 #zr2 #z71 #trailboss #chevycoloradotrailboss #tacoma #gmccanyon #offroad #tacomakiller #offroad #2023chevycolorado #2023chevycolorado #lexus #landcruiser #butcherjones #switchpro #lights #offroadlights #electrical #wireing #howto #installation

[@migueltj6931]

Thank you for showing the grommet that everyone and their dog talks about but no one actually ever shows a picture of it

[@Downtimelost]

😂😂😂 I know your pain! That used to drive me crazy 😂

[@TonyTheTechnician]

Great job brother. Those lights turned out sick!! Good job with the grommet as well. You just got to man handle that thing lol. Cant wait to see the chase lights as well. Look forward to the next video as well.

[@Downtimelost]

Thanks Tony !! Lol yeah that grommets is a pain in the ass 😂 chase light comin soon I’m campin this weekend so that’s next weeks vid !

[@TonyTheTechnician]

@Downtimelost heck ya!! Dang man I wish I could get out as much as you. Hope you had an amazing weekend out. I look forward to the next video!!

[@davvila2244]

If you pull your carpet back on the driver side,There is a plastic plug on the floor board you can drill out and run wire to the engine bay.Just for the 411.I did a Aux beam power module with no problems.

[@Downtimelost]

Good to know ! I’ll look into it !

[@davvila2244]

@@DowntimelostForgot to say I have the 2023 Colorado LT.

[@drivesafefoo]

Sweeet hell yeah! Can’t wait to install mine!

[@Downtimelost]

U got one ? That’s fire !

[@rowysokatelyn]

Dude I love the lights ! 🤩

[@Downtimelost]

MEE TOO !! 🔥🔥

[@TheLostSquadron]

Was not aware of this, thanks! Just want to add fog and bed lights to my Trail Boss using the GM accessory box, but it's expensive. If you look straight back from your Lasfit setup to the firewall, you can see two studs that GM uses for their accessory box mount. I believe they're on every truck regardless of whether they come with that kit. There may also be a grommet right there, can't look at my truck at the moment.

[@Downtimelost]

Ahhhh I was tryin to mount the box on there 😂😂

[@Z71_Yaunt]

Quick question! I just got my Lasfit pods for my 2023 Z71. I added the accessory power box at the dealership but have no idea how to connect the pods to that Aux lever next to the lane assist lever. I would appreciate any feedback!

[@Downtimelost]

I’m not sure about that one either brother ! Not much info in it , I wish u luck !

[@petergarcia485]

Nice job on this. Gets me some good ideas

[@Downtimelost]

Sweeeeeet thank you sir !! I’m happy I could help out 🤙

[@colesky33]

I have never done this type of thing before so forgive me for asking a dumb question, but what product do you use to tap the fuse?

[@Downtimelost]

No dumb question here ! The kit comes with a fuse tap! Simple plug and play with one crimp 👍

[@alejandrocarvajal2781]

did you see that rough country finally came out with 4 and 6 inch lift kits ?

[@Downtimelost]

Yeah I saw that ! I’m Just got a fan of off the cross member drop stuff it defeats the purpose of a lift and I don’t need nothin crazy big once u get to tall with I’ll my overland goodies it get tipsy lol hoping to long travel In the future 👍

[@jimmycline4778]

Did you get the 430torque calibration? I did and payed 395,,,, I also payed for the labor,,,but someone on You Tube said I wasn’t suppose to pay for the labor cause it was included in the price of my truck,,,can you please tell me if this is true,, if so I’m bringing my receipt and telling them to give me that money back, also if it’s true who should I talk too at GM? The total price was over 600 dollars! Also, I don’t feel a huge difference ,is their anyway I can go to another dealer and verify they DID calibrate it to the HO calibration!

[@Downtimelost]

I did not but thinking about it , dose it realy not feel any different? That’s kinda shitty, u should probably just ask some others what they had to pay cuz that’s messed up :/

[@kevinbreault39]

83! The LED cargo lamps. Thanks so much!

[@Downtimelost]

Thank you ! 🤘

[@tylervanee734]

Isn’t that a constant on?

[@WeFergie]

Interesting install. Was looking for a way to go through the firewall on the passenger side. Good timing!

[@Downtimelost]

Lol happy I could help ! 😂

[@progestar]

How hard was it to pull that rubber grommet and snack your wire in the side? I'm thinking of doing something similar. Is fuse 87 always hot? Or is it ignition based?

[@Downtimelost]

It’s a pain in the ass lol and yes 87 is always hot but with the lasfit switch panel u can turn it off so it don’t drain ur battery 👍

[@ambikasingh3097]

@@Downtimelost any tips on getting through the grommet? I'm having a hard time

[@maxeo2644]

Is there a way I could run the headlights on that panel?

[@Downtimelost]

Not sure 🤔 if there’s a will There is a way ! 😂

[@Trailboss_Serg]

Dope im gunna order mines now !! 🔥 also how did you mount your rock lights ?

[@Downtimelost]

Hell yeah ! 🤘 I just used 3m double side sticky tape lol

[@NBRPWeazelNews.]

Did you drill or how did you get thru the grommet on the passenger floor board

[@Downtimelost]

I just pulled the grommet over and pushed the wire threw , not on the floor board on the passenger fire wall 👍

[@NBRPWeazelNews.]

@@Downtimelost yeah I just got done drilling hole thru it lol but it was worth it I got a cool led strip on the truck now wish I could show it

[@Downtimelost]

@@NBRPWeazelNews. sickkkkkk I might have to do that 🤔

[@NBRPWeazelNews.]

@@Downtimelost it would look sick on ur truck I can’t wait to build something similar to ur truck I love ur setup man and the adventures!!!

[@honeyberry4009]

Are you considering any of the new lift kits that have comeout by RC, the 4 inch or 6inch? They look pretty nice on the site

[@Downtimelost]

Not really I’m just waiting on @peaksuspention coilovers with resis with upgraded uca’s ! They should be out by the end of the year! I just don’t like the cross member drop stuff in my opinion it just defeats the purpose of a lift , but to each there own. It looks nice just not my cup of tea

[@travisjames915]

Dumb question. But does void warranty?

[@Downtimelost]

I’m not sure but Chevy has a switch panel you can buy from them but it’s expensive lol

[@robdfar]

how much was it vs the one that chevy has for the colorado and you do not need to have anything into the fuses or wires to the battery there is a connection for gm's version

[@Downtimelost]

GMs is like 600 for 4 switched lasfit is 180 for 8 switches !

[@kevinbreault39]

Curtis Schimmoller dang! I hooked up to 83, the LED cargo lamp, and my lights turned on. I walked away for more than half an hour with the truck locked, lights were still on. Are you sure this fuse is switched?

[@Downtimelost]

Oh yeah it will stay on if you don’t use the lasfit switch panel cuz the lasfit one turns off

[@kevinbreault39]

Hmm. So why was it hard to find a fuse to tap in the fuse box for you then? You found a constant power fuse, which all of them are.

[@Downtimelost]

@@kevinbreault39 it wasn’t that hard I was being a baby lol

[@kevinbreault39]

@@Downtimelost hmm, well now i know there must not be any switched fuses in the engine bay, im interested to know how you got through that grommet. Ive tried and it aint easy!

[@mt186]

​@@kevinbreault39he went around it from what it looks like in the video. He separated it and went through the side

[@Mi4mi_joe]

Planning on doing this with the SP9100. Thinking of using a magnetic ball mount on the dash somehow. Shits expensive though 😅

[@Downtimelost]

Switch pros EXPENSIVE! Lasfit just as good way cheaper and I got u a discount code ;)

[@Mi4mi_joe]

@@Downtimelost I just like that Switch Prism has the fuses built in and is essentially water tight. Just patiently waiting until I have the funds 🙃. Enjoy your videos though bro!

[@Downtimelost]

@@Mi4mi_joe I feel ya , I appreciate it brother 🤘

[@zeethru]

does it have the stock exhaust?

[@Downtimelost]

Nope ! I have the magnaflow overland series Exhust !

[@zeethru]

@@Downtimelost sounds great! I like how quiet the truck is while cruising, but would like more grunt when accelerating. Would you say this Magnaflow is quiet while in the highway too?

[@Downtimelost]

@@zeethru oh yeah you can hear it a bit on the hwy but nothing crazy !

[@mannymolina6647]

Does anyone know how to wire a lightbar to the AUX switch built in to the front console?

[@Downtimelost]

I tried to look in the fuse Box but I’m Not sure the plug might be behind the switch

[@mt186]

That switch is a switched ground. In the passenger rocker there should be a black and white wire capped off that goes to that. You will need a relay and to wire that relay using that ground as a switch

[@johnw3724]

What a hack job of an install.

[@Downtimelost]

Lol it works engine bay not full of wires 👍

[@Iramz71]

Why didn’t you just use the factory aux switch

[@Downtimelost]

Cuz I have multiple lights now , I need more than one switch

[@Z71X4]

0:33 - 6 gang switch -proceeds to hold an 8 gang without realizing- you were to excited weren't you?!

[@Downtimelost]

Lol yes sir I was very excited 😂😂😂