How to Iron Out Nasty Wrinkles in Your Fabric

[@Widespread-Panic]

Thank you so very much for this video! I am 46 years old, have been sewing for more than 30 years, and I never knew this until tonight. God bless you for posting this!

[@paulwhent1370]

Thank you, I'm a young man and I havnt really ironed but for my job have to wear waistcoat which was covered in wrinkles and your simple trick worked and I can't thank you enough. I was never taught how to iron or press or much tbh so sadly your tips and tricks are helping my knowledge thank you so much

[@fionn5305]

I was given very large pieces of material, then I went out and purchased a sewing machine, now I have to learn to sew :-) Laura your videos are amazing I have only a few minutes ago bought the Panasonic 360 Iron, I need to know how to Iron silk. on one of your videos you had a see -thru pressing cloth, I have been scoring the internet and youtube to see where I can now purchase same. Thank you so much for making my life so trilling I am 66 and life begins a new, every day and love learning something new.

[@SewVeryEasy]

Thank you and welcome to the world of sewing. You can get pressing cloths at most fabric stores but here is one amzn.to/2TPznOU

[@Jointlock]

Thanks for the handy tips. On another unrelated note (and I am sure you have heard this a million times before) you are such a beautiful woman!

[@SewVeryEasy]

Thank you:)

[@patcampbell3585]

I really enjoy all your videos. I can’t wait to make the mariners compass quilt by following your video. I will attempt many items only because your videos are so clear on instructions. God bless.

[@Ms17Dixie]

Just did this and it worked! (And if I'm being honest here, I didn't think it would work on denim.) Thank you!

[@maryb6872]

This worked very well, but I noticed that if you smooth against the grain, the fabric stretches. When I smoothed before and while ironing, I did so with the grain, which kept the fabric from distorting. Thank you for the great tip.

[@DigitalResurrection]

Thank you so much I iron my husband‘s work shirts, and I noticed fine little creases that where not coming out when I would iron and even when I threw it in the dryer on wrinkle free setting, it would not take them out, but this trick has helped tremendously, so thank you again! ❤😊

[@KidaleSmith]

This may seem silly for some but i really needed this, thank you so much

[@eileenfb1948]

I have a beautiful piece of batik and the wrinkles just won't go. Patience and to wait is the answer I'm hearing. Thank you Laura, I Will get those creases out now.

[@SewVeryEasy]

eileenfb1948 Hi Eileen, some of the Batik are always going to have creases because it has been heat set. Just like that seam down the front of a leg on pants. But with patience you will be able to get out a good portion of them. thanks again:)

[@jynclr]

Thank you! Thank you! Thank you!!! Best method I have found to take out wrinkles in quilting cotton I inherited from my partner's father. I'm going to try this on my knits as well.

[@user-lz7ug5cg9y]

Thanks for the tutorial! I just ordered some cotton fabric that came with a lot of wrinkles, so hopefully this will do the trick. Also, this is a bit random, but I love your dress! :)

[@SewVeryEasy]

This is good for any wrinkled fabric:) and thanks about the dress:)

[@alilee7410]

Really helpful tip Laura, it just makes good sense, I believe in all the sound steps for sewing a quilt etc, why rush or compromise when making something so beautiful :0)

[@SewVeryEasy]

Ali Lee For me it's not only the joy when it is done but the enjoyment along the way:D nice to hear from you

[@Cybelle2006]

This is very helpful indeed. What are the alternative starches you use. What are the advantages or disadvantages of using them? Thanks so much for sharing.

[@SewVeryEasy]

I use whatever my quilt store is carrying! as I do love them all. The advantage is you will get no little white flakes as you press however it is softer than starch. Hope that helps

[@ab-yi2wf]

Thank you. Hope this help with a thick fabric that has deep set wrinkles (due to high heat dryer) that cant be ironed away .

[@lucilledaub5991]

Great tips to get wrinkles out of fabric.

[@BobCrochets]

Thank you for this! I've got a lovely piece of fabric I'm trying to iron out for a last minute Christmas present and it has some of the worst end-of-bolt wrinkles I've ever seen!

[@tammy5926]

I know the video is 5 years old, and I think the tips here are very helpful. The problem I'm having is finding an iron that actually gets hot enough to iron out the wrinkles. I did a search to find the best irons, and the top ones are available on Amazon yet most of the complaints are that the iron is not getting hot enough. So if we have the best irons not getting hot enough, that's a problem. Even people who say they've bought the same iron in the past and it doesn't seem to be the same when they replaced it with the exact same iron today.

[@TheChrisgojai]

Thank you Mrs. easy it was helpful now I can iron my shirts and when I go by my parents house maybe my mother Will notice she seems to notice when I don’t iron because I don’t know how to

[@rasomervell]

Does this work for woven home decor fabrics like jacquard?

[@martyk2253]

I have some sheets that were badly folded at the top in the original packaging. I ironed it ok, but after washing the creases return.

[@allieshepherd7860]

Funny, when I was a little girl I watched my Mom on laundry day shake water onto the clothes, roll them up, place in a plastic bag, and put them in the refrigerator for a while. Later she'd get the clothes out and iron them. I guess it wasn't a steam iron and she had to make her own steam.

[@SewVeryEasy]

Allie Shepherd You got it:) Old ways of doing things still work...even today. Thanks for watching

[@bigs1546]

+Allie Shepherd My Grandmother sprinkled all the cottons, rolled them and popped them in the freezer until she was ready to iron - not a wrinkle in sight :)

[@SewVeryEasy]

yes my mother did the same thing too:)

[@DiamondRubyJewel]

SewVeryEasy WILL YOU UPLOAD A VIDEO ABOUT HOW TO STARCH AND IRON LINEN GARMENTS AND POLYESTER?

[@RameyRocks]

Wow! I've never heard of that. I remember my mom ironing for hours! Ugh! She is quite the iron master. But she never taught me!! So here I am wrestling with a gathered bed skirt!

[@five-clawdragon]

I'm not clear if you are addressing ALL types of fabric; there is a HUGE difference between pressing my 100% cotton creases (easy) and my elderly mothers 100% polyester creases that seem stubborn and permanent. A dryer did not cooperate and the low heat setting actually dried with high heat . . . resulting in a plethora of seemingly permanent wrinkles in all her polyester pants. Did I ruin all her pants or is there a solution out there to my conundrum??? Please help . . . anybody out there??? Thanks.

[@SewVeryEasy]

Her pants might have permanent set creases running down the leg. If this is the case it will not be pressed out. Try this... wash the pants and let them dry on a table flat into the position that you want them to be pressed in or just out very flat. Run your hands over the pants stretching out the wrinkles. Keep an eye on them and if it looks like the wrinkles will flatten out, let it dry laying flat. If not, let it almost dry and press them with a pressing cloth until they are dry. Hope this helps:)

[@wtfdinos]

This was super helpful. Thank you so much!

[@ajk1122]

Very helpful idea , great job ma'am

[@FranklinSan]

I just came back from Japan and I bought a Tenugui that has an image printed on it. I want to frame it but it has 3 crazy wrinkles across it that don’t seem to come out when ironing. Should I steam it? I haven’t tried getting it wet yet, after watching this video it seems like that will be my best bet..

[@ElohiSilverEarthVentures]

how do I get the wrinkles out of ryon from bamboo? same thing? I've been using a misting bottle, the only thing I haven't really done is be patient and wait a minute after misting the fabric

[@thefilmpoets]

That worked! Thanks internet mom!

[@jeanwhitesavage1966]

What do you use for a starch alternative?

[@abayless3816]

I have some poly/spandex/cotton? shorts. I didn't use starch, but after the first washing the creases came right back. And I have never had this happen before. Frustrating.

[@luvpinkhellokitty]

How do I wrinkle out chiffon? Thank you

[@kwlee4190]

Does this work for any fabric?

[@meganmcgowan5798]

My husband has some silk shirts that are full of wrinkles. I tried this trick and unfortunately, it didn't work. They would look smooth and flat, but then the wrinkles would just come right back on the hanger. It's almost like the shirt was never ironed to begin with. I even tried re-washing them and pulling them out of the dryer before they were completely dry, then running my hands over the wrinkles as I ironed. Again, they looked smooth and flat, but as they cool, the wrinkles come back again. Any ideas?

[@TheLOUIVY]

I remember seeing a man at our local cleaners pressing clothes and he would sometimes hit it with a stick. I heard that in the old days (1950's) that was how they got out difficult wrinkles. Any truth to that ???

[@jackbendickson7487]

do you go crosswise grain or lengthwise grain

[@SewVeryEasy]

both, as I want to flatten it both ways. good question thank you

[@ZachBornheimer]

Great video. Succinct. Clear. Direct. Accurate. Thank you!

[@summery111]

Can you teach us to remove creases from cheap fabric? I hv lots of clothes that I never wear before, bought online, came in with lots of wrinkles.

[@BiBiDuBu189]

Looks like this is an older video. Does anyone know what the purpose of the starchy water is?

[@user-qv4ni9hd8m]

Great advice! Thank you!

[@DIYwithMYS]

Great.....hope it works for net dress too

[@malikyoung2568]

Thank you, this really helped. I appreciate it.

[@reed6490]

I am working with a brocade fabric that has metallic threads. It has a nasty crease mark where the fabric was folded on the bolt. I'm not sure if I can wet this fabric??? Is my only alternative sending it to the dry cleaner?

[@SewVeryEasy]

Try steaming it. Lie the fabric wrong side up. Steam it with the iron, do not touch the iron to the surface just steam. Well it is hot tap it and iron it with your hands until it has cooled down. If you find The wrinkles are coming out continue a couple of times steaming and pressing with your hands

[@fshs1949]

Good idea given. Thank you so much.

[@4GiveN4get]

Thank you Laura! My fabric management skill on large pieces, is laughable; with the ironed fabric sometimes more jumbled/wrinkled than the un-ironed. Will you please demonstrate ironing a quilt-top?

[@SewVeryEasy]

I will work on it

[@Monty2289]

It would just be really nice to know the ins and outs of ironing in general. When I iron it generally does me no good. I'm just heating the fabric (particularly scrubs) and no wrinkles come out. I'm a guy and it's really embarrassing that I can't iron even though process just looks like you're pressing well...a hot press on to your clothes

[@SewVeryEasy]

I think that would be a great video, thank you. In the meanwhile here is a video that might help kzbin.info/www/bejne/qmG2cnaqiLSKrdE

[@Lasaro7499]

Can u warm up tortillas on the iron?

[@ericme4767]

LOL!

[@mi5jason]

Thank you for the excellent right to the point video.

[@ribkahiswarni9257]

Can't wait to do it, thx your tips

[@RameyRocks]

I'm trying to iron a gathered bed skirt. I'm not good at ironing and this is quite an ordeal!

[@aileenhindley5964]

Will this work on all my wrinkles?

[@SewVeryEasy]

AILEEN HINDLEY If you are talking fabric lol :D. Patience will get out most wrinkles. Thanks for watching

[@Transitlady59]

Ty great tips!

[@mdldgsc]

Thank you so much for this video 💕

[@mamagigie]

thanks mom. it works 😊😊❤

[@hb3o]

Can anyone tell me...will it really work on a pure white cotton cloth...

[@IthasToBe1_Leleippp]

Thank you this helps me and my mom

[@sandibeach7291]

Is this the same method for flannel pillow cases?

[@SewVeryEasy]

Yes, but keep in mind that flannel has more stretch so be gentle.

[@sandibeach7291]

Thank you for your quick response

[@femalemart1388]

Great tips as always - thank you.

[@luwannamclaurin1077]

Thank you, great tip

[@IloveSPIDERZ]

Thank you!

[@mehreenn]

Ty for saving my clothes!!

[@UTubeStar91]

Do you know how to remove wrinkles from flat printed bed sheet ( 50% cotton & 50% polyester )? it has a tag ( no iron muslin ) but I want to iron it with my steam iron.

[@SewVeryEasy]

I think!! what the tags means (no iron muslin) is that it will not need ironing like a " no iron shirt" it will not get wrinkles. You can iron cotton and you can iron poly, so you should be able to iron this. Use medium iron and test a small corner first. Start with a lower heat and go up as needed.

[@UTubeStar91]

will try it. thanks :)

[@kellyf2815]

The instructions written out 1. Relax fibers by dampening your fabric 2. Let it sit 3. Take hands to smooth fabric as flat as you can 4. Take hand and smooth before you iron You may have to do this a couple times. Now you can press it 1. Spray it with your preferred starch 2. Let it sit for a couple minutes so starch gets a chance to soak into fibers 3. Press it like normal

[@anarchy-cupcakes]

What heat setting do you recommend for your iron? My iron goes from 1-10

[@SewVeryEasy]

For hard wrinkles 10!

[@oldtimerlee8820]

As hot as the fabric will accept without damage. Most synthetic fibers and fiber blends can't take as much heat as natural fibers such as 100% cotton. Always do a test piece when unsure of how much heat a fabric will take. A press cloth may also be needed in some situations.

[@jenniferbobanleon6288]

Is it applicable for net fabric?

[@SewVeryEasy]

no, and please place an other fabric on top when you press

[@jorelkent567]

Buena idea gracias por compartir

[@MsAnon4223]

To any newbies watching this, don't iron on your cutting board. I have that same one in the video and I made the mistake of putting my ironing mat down on top of it and it warped. It's never been the same since.

[@SewVeryEasy]

I'm sorry if I misled you. I was just trying to demo the ironing I should have mentioned that. Thank you for letting another know.

[@MsAnon4223]

@@SewVeryEasy I made the mistake when I first bought the cutting board It wasn't because of your video. I've only been sewing a couple of years now and I've learned quite a few things through trial and error. I just mentioned it so others who are new to all of this could avoid possibly ruining a good cutting board. Your videos are great and very helpful.

[@JeffryJohnston]

@@MsAnon4223 Thank you! I was reading the comments to find out if I could iron on my cutting board, because the video seems to show it. Your post saved me (although I'm sorry about your board)! I did some checking and it looks like people are making their own oversized ironing boards using plywood, a single layer of something called "warm & natural batting", and then either cotton twill, canvas, muslin, or silver ironing board fabric.

[@JeffryJohnston]

@@SewVeryEasy Maybe you can add some kind of text to indicate that it's only a simulation?

[@barbra429]

does anyone have any suggestions for getting the wrinkles out of duct cloth I washed it and it is board stiff it is so frustrating. I'm trying to make a floor cloth but I can't get the wrinkles out.

[@SewVeryEasy]

the only thing I can think of is to wet it and lay it out flat to dry and smooth it with your hands as it is drying

[@barbra429]

@@SewVeryEasy Thanks

[@kevinr.akerman1112]

Thank you very much for the great tips, bye 4 now~

[@ririemifuentes9381]

Laura thank you..until ive watched your videos now i know how to iron barong.my problem now is for the wool pants to stop the shiny when ironing.more power

[@SewVeryEasy]

place a pressing cloth on top of your wool before pressing. So that the iron never touches the fabric, just the top pressing sheet.:)

[@Sharp-h2g]

Could I do this with a crewneck sweatshirt

[@SewVeryEasy]

you can but press the inside and test a corner first

[@sherrrahmad9608]

Thank you

[@rowenta1235]

nice shiny iron x

[@thepurplebox380]

Super helpful!!!

[@JtruUk]

Thanks for this great video. My table cloth is now crease free :D

[@SewVeryEasy]

Glad to hear and thanks for watching

[@susancejka6332]

What about flattening batting that has been folded by manufacturer

[@desireeratima4001]

Perfect!

[@daniyalhashmi6433]

Thank you so much

[@dyane1869]

Your amazing! Need I say more?

[@zzyzxx13]

No. You just need to say it correctly.

[@SAL21990]

😭 I have done this over 10 times on the same fabric it’s hot inside and it’s been over an out of doing this to know avail.....does anybody else have a suggestion!!

[@thefabricexchange]

this is indeed awesome

[@SewVeryEasy]

Thanks

[@elizabethboateng4137]

Thanks

[@Lasaro7499]

Can the iron get hot enough to fry bacon?

[@TheoSmith249]

I have found that i am much too impatient to wait. I have discovered spraying 12 yr old scotch significantly reduces the ‘relaxation’ time.

[@yrllpoison4709]

very exllent

[@gobbledygoook]

In the material you show there are no nasty wrinkles... It's pretty easy to get it perfect then

[@sandygrogg1203]

Such good information! Thank you...

[@SewVeryEasy]

Sandy Grogg your welcome, thanks for watching:D

[@DiamondRubyJewel]

*I'M GONNA DO THE OLDSCHOOL POP IT IN THE FREEZER TRICKS IN THE COMMENTS AND THE DAMP AND STRETCH IN THIS VIDEO. I'M NOT PUTTING MY ARM IN FRONT OF A HOT IRON. BURNS& HIDEOUS SCARS*

[@gregorym.3565]

Sarah

[@yrllpoison4709]

i love you

[@jesusfirstto-the-pointendt4552]

Brilliant! Thank you! Praise God!

[@0k_ayy832]

wow

[@PickAShoe1]

Mummy sorry mummy sorry 😞

[@gregorym.3565]

D

[@eshjane]

Thank you 😊

[@jaegergirl6]

Thank you! Worked like a charm!