The problem that i have always ran into is while those are great jacking locations, you need somewhere to place your jack stands. In the front, you can use the k-member for the jack with a large piece of wood and put your stands in the location that you illustrated. But when you go to the back, you need a place to put the jack because the location you illustrated is where you will need to put the jack stands. I have resorted to using the lower control arms, but it is sketchy as hell. A company used to make a jack adapter that would slip between the exhaust pipes and let you jack on the rear diff housing- but they went out of business years ago.
@gregs_garage Жыл бұрын
Good points. Those aluminum control arms look awfully slippery. With the lift I’m spoiled because the air bag jacks are very stable plus if they fail the car just falls on the lift instead of on me. I sometimes put a huge block of wood under the control arms just in case.
@chazshier Жыл бұрын
Couldn't agree more. Worst car to try and jack that I've ever owned. I end up spending more time getting the jacking right then whatever job it is I'm jacking it up for...
@ericfowler424811 ай бұрын
Same exact thing you said. That's why I'm here where do we put the jack stands in the rear of the car?
@fixxerautomotive491711 ай бұрын
@@ericfowler4248 Recently, i discovered that you can buy a spreader bar with adjustable pads for a Daytona jack at Harbor Freight. Using this, i can simply slip the jack under the driver door and position the pads on the pinch weld, then jack the driver side just high enough to get the jack stands under the car. then you can go the the passenger side and do the same. After that, go back and forth with the jack to get the height you want- works great!
@RADGarage3 жыл бұрын
The things you learn on the Internet! 🤘
@huntingvipers17897 ай бұрын
On the rear of the car if using pine 2x4 I’d suggest running the grain of the block in the opposite direction of the pinch welds. I could see the weight splitting the wood.
@gregs_garage7 ай бұрын
Yes always go across the grain good idea! The wood can split easily
@sb-di3of2 жыл бұрын
heh. he said i can jack on my wood. nice.
@scientist1004 ай бұрын
gay guy
@johnmcmullen4562 жыл бұрын
Thanks, very helpful. I just ordered a Quickjack and pinch weld rubber pads & needed to find the best C4 lift points.
@gregs_garage2 жыл бұрын
I'd use the wood blocks.
@robertnunn4972 жыл бұрын
Yea, I did the same
@kenfong63735 ай бұрын
As many have already said Can you point out the best places to support and place jackstands ... Usually the jack is really in the way
@gregs_garage5 ай бұрын
yes I should really do another video showing that concept. You are correct the jack is in the way on most unibody cars. There may be a workaround on the C4 though...
@ericfowler424811 ай бұрын
Where do I put the jack stands on the rear of the car once I use the jack to jack it up in the rear I can't genie the Jack out of the way and put jack stand there where I just jacked it from.
@gregs_garage11 ай бұрын
maybe jack with factory jack on factory jack points then put stand with wood like in video?
@ericfowler424811 ай бұрын
@@gregs_garage the only problem I have with that is the car that I own 96 Collector's Edition is completely stock. The Jack equipment has never been out of the car. And really don't want to put scratches on it.
@ericfowler424811 ай бұрын
@@gregs_garage believe me I have thought about it. This car is just to nice. There's not even dirt where there's supposed to be dirt.
@gregs_garage11 ай бұрын
@@ericfowler4248 maybe jack on the control arms or something for a quick minute till you get the stands and wood in place. Although nobody really cares if a jack is scratched - its just a car.
@kanamekiyru Жыл бұрын
Man I'm just trying to change a tire😂why is this so complicated
@dolnick72 жыл бұрын
So once jacked up there is it safe to place a jackstand on the jacking point? Just jacking the car isn't good for much besides changing a tire; I need access to the inner bits.
@gregs_garage2 жыл бұрын
you'd have to put a jackstand under a structural point.
@larrybud3 күн бұрын
Yeah, this is the problem. The pinch weld is where you want the jackstand.
@kussstuff2 жыл бұрын
Good Job Thanks
@rickprice63122 жыл бұрын
Nice ZR1!
@turbobuick333 жыл бұрын
What brand air jack are you using?
@gregs_garage3 жыл бұрын
www.advantagelifts.com/collections/advantage-lift-accessories/products/air-bag-jack except I don't have those crazy extensions. I just put the jack on pieces of 2x10 wood to go higher.
@exilemikeАй бұрын
Ok, so where do you set your jack stands when you have it in the air?
@gregs_garageАй бұрын
Not easy
@DiegoZebazty-83 ай бұрын
How you doing whitt normal jack on floor???cuz the Corvettes are too low!!
@gregs_garage3 ай бұрын
You need a low profile car jack. Or drive the tire onto a piece of wood to get the car up a bit
@josephmichaelgoncalves17282 жыл бұрын
Do you know what year Corvette this is? Thank you so much for this valuable information, I appreciate it! I am getting all new tires on my 1992 and I want to make sure it is lifted properly without damaging anything.
@gregs_garage2 жыл бұрын
1991. your 92 is the same.
@freedomnow9254 Жыл бұрын
Thanks
@gregs_garage Жыл бұрын
Be careful
@ScreamingEagleFTW2 жыл бұрын
Is that floor jack you have there, does it lock so you can use it as a jackstand also?