How to Jailbreak Nintendo Switch 18.0.0 // Atmosphere 1.7.0 Hekate 6.1.1 // STEP BY STEP

#switch #nintendoswitch #atmosphere #hekate #switchjailbreak
/ @idx3tutorials
🔥 Thank you for watching! Subscribe and hit the notification bell!
Attention! This tutorial is for Unpatched Nintendo Switch V1. For other Switch consoles, you must have a modchip installed. Before the process, check the status of your switch on this site: ismyswitchpatched.com/
Hi everyone. I will not confuse you in this tutorial, we will do it quickly in just a few steps. At the end of the video your switch will be successfully modded and after that you can watch the video below to learn how to install games on your switch using Tinfoil.
Files:
ridgecrop.co.uk/index.htm?guif...
github.com/Atmosphere-NX/Atmo...
github.com/CTCaer/hekate/rele...
gbatemp.net/threads/sigpatche...
github.com/eliboa/TegraRcmGUI...
How to Avoid Ban on Nintendo Switch: • How to Avoid Ban on Ni...
How to Update already modded Nintendo Switch to 18.0.0: • How to Update modded N...
Complete list of switch tutorials: • Nintendo Switch Tutorials
🌐 Connect with me on social media:
/ gameroomdnd

[@IDX3Tutorials]

New 18.1.0 Jailbreak Tutorial kzbin.info/www/bejne/hmSqmIyfq9pmq9U

[@stephanieeager7190]

Could you make a video how add android and Ubuntu without loosing the mods ?

[@atouchofcloth]

Been trying for days with multiple guides all talking me away from KZbin guides. You sir are a lifesaver. Simple to follow guide for even the smoothest of brains coupled with cool music

[@IDX3Tutorials]

Thanks, I'm glad I helped 🙂

[@EricHudson-yj9jc]

Do you just buy the switch unpatched??

[@atouchofcloth]

@@EricHudson-yj9jc no I had a v1 wasting away in a drawer.

[@thetruegodofgeese]

yo thanks bro this is the best tutorial i have seen, very straight forward

[@IDX3Tutorials]

You're welcome 🙂

[@gsodgoon2905]

Been trying to a few hours and this actually worked. Thanks, kept getting no main boot entries when trying to launch emummc

[@IDX3Tutorials]

I'm glad you made it.

[@kikissolano5645]

I'm having an identical problem right now. Did you just restart from the very beginning? delete everything off the SD card and start from scratch? or did you just click and drag certain files?

[@gsodgoon2905]

@@kikissolano5645 yeah restarted fresh and followed this guide. Had no problems

[@kikissolano5645]

@@gsodgoon2905 appreciate it brotha. Just fixed my issue as well

[@spacedevilcz6885]

You have quality content

[@IDX3Tutorials]

Thank you!

[@Sebi12345]

It worked bro, thanks you're a lifesaver and saved my switch files cuz I had so many modded files I couldn't play on until your video saved me thanks!! 😎 I subscribed which I never do, you deserve the extra subs bro thanks so much 🥰🥰🥰

[@IDX3Tutorials]

Thanks for the sub!

[@zjzjzjujj3947]

how to install tinfoil sir

[@IDX3Tutorials]

kzbin.info/www/bejne/oGWzYqiIfrypq7s

[@AbdulAziz-ty5gw]

hey bro I tried modding my Nintendo Switch following a KZbin tutorial but is from the different video not from ur video, but the software went wrong. Now, while my Switch boots up and functions properly with the original software, the modded software isn't working. Any ideas on how to fix it and get my modded Switch running?

[@IDX3Tutorials]

What exactly is happening and on which firmware version? Send me screenshots on ig.

[@StealthNightmxre]

I modded my switch before and now I’m trying to mod it again but tegra rcm gui does not work it gives me the hour glass symbol and then goes into not responding mode

[@IDX3Tutorials]

Try another usb cable. Some cables are made only for charging and not for data transfer. Also try to install the driver from the settings tab.

[@theironfro6395]

You're video worked for me. Thank you very much. Quick question: At the very end, when you went back to stock sysMMC, how from there do you go back into emuMMC?

[@IDX3Tutorials]

Same as the first time, through the hekate.

[@theironfro6395]

@@IDX3Tutorials Thank you. Not too much of a hassle.

[@TheREALGoofy_]

I have a question, ive been following the steps but I saw you listed formatting the sd card, i kinda am using my old and only switch that i own and i dont want to lose my save data on everything. Do you need to format my sd card to work? Because this is the second tutorial that I am watching and it keeps saying I do not have rcm.

[@IDX3Tutorials]

SD Card must be FAT32 to run CFW. If yours is FAT32, then you don't have to, but just in case, make a backup of the entire SD card before the process

[@TheREALGoofy_]

@@IDX3Tutorials Tysm, I’ve been backing up all my 128 gbs of data for a while now, thanks for the information!

[@I-Nspectgadgets]

I accidentally shut my switch off, and it went back to the normal software do I have to do everything over?

[@IDX3Tutorials]

No,just inject payload and launch cfw - emummc

[@wright970]

why mine keep saying no main boot entries found? is it because i may not have downloaded the latest one?

[@IDX3Tutorials]

kzbin.info/www/bejne/hmSqmIyfq9pmq9U

[@thefrustratedpineapple]

I’m kinda new to modding and was wondering what sigpatch for atmosphere does? I have modded my switch using a different guide and that file wasn’t used, so I was curious of its importance.

[@IDX3Tutorials]

As long as you can run every game you install, it means that sigpatches are up to date and you have nothing to worry about.

[@Jretropie]

Hi, I just mod my switch. If I select to boot it back to offical firmware(SYSMMC), how do I boot it back to EMUMMC?

[@IDX3Tutorials]

The same as before, through the hekate.

[@lukereschke8273]

hey quick question, its not letting me format the sd card cause its saying its used by another process? i dont know why its doing this

[@IDX3Tutorials]

Restart your computer.

[@C3deno123]

hi when i enjected the payload my switch popped up a message saying"Failed to init or mount sd/ press any key..what do i do??

[@IDX3Tutorials]

Maybe the sd card is bad? Try another one. I got that error when my sd card died.

[@alexanderespinoza2814]

After getting it into the final part at the end where it's fully modded how do I run games on it or add it?

[@IDX3Tutorials]

kzbin.info/www/bejne/oGWzYqiIfrypq7s

[@Hoanyy2.0]

but suddenly to restart the jailbreak mod if you turn off the console you have to redo everything?

[@IDX3Tutorials]

Inject payload and boot into cfw-emummc

[@kevhough2355]

Thank you so much. After following several other guides with no success this has worked for me! My switch was already modded but I chose to follow this after some of the SD card folders got too messed from failed attempts. Only issue now is my games won't start, even though they're still on the SD card. Any ideas how I can get them going please? It just says 'software data is now downloaded'.

[@IDX3Tutorials]

Organize the files like in this tutorial and there should be no problem. The files are all in one package with updated sigpatches.kzbin.info/www/bejne/j57MiXiLi5VredE

[@user-qq9vm3jo3e]

Question : why do you need to inject the payload via tegra? Is it necessary? Just curious

[@IDX3Tutorials]

Instead of Tegra RCM, you can use RCM Loader, but the payload must be injected. And every time it dies, you have to inject it again. Only consoles that have a mod-chip installed do this automatically.

[@ferbytheblack7928]

I accidentally updated my switch to 18.1.0 and your tutorial saved my day. W channel

[@IDX3Tutorials]

Glad to hear that 🙂

[@ITS_TUX]

every time i plug my switch in it automatically turns back on even if the rcm jig is in and the switch is powered off

[@IDX3Tutorials]

Have you checked if your switch is modable? ismyswitchpatched.com/

[@williammartins6767]

this mods requires a chip to work? like picofly? it will work on a lite console?

[@IDX3Tutorials]

You can also mod chip moded consoles but you have to rename hekate.bin to payload.bin

[@agbhychannel3209]

I tried installing cfw on my switch on firmware 18.0.0, but after injecting the payload there was no response. I wonder why it could be like that? and what is the solution? Thank you

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@uchuynguyen5980]

Thank you so much, I succeed with my Switch. Haha, while was doing it, I mistakenly formatted my SSD instead of the SD

[@IDX3Tutorials]

Mate, I know how you feel 🤦‍♂️

[@youssefyouss9369]

Hey brother my emmumcc is on sd partition and not file.. now sometimes it crash should i create a new emmucc on the sd file and not partition ?

[@IDX3Tutorials]

Maybe you didn't leave enough space for emummc. Try with sd file based emummc, that way you don't have to worry about space and it's simpler...

[@zakariyyakhan5353]

It works but if I install a game using dbi or awoo it's a blank box with the spinning cog. Any idea why?

[@IDX3Tutorials]

You skipped Sigpatches.

[@zakariyyakhan5353]

@@IDX3Tutorials I have added the sigpathes from gbatemp. I've been trying to get this to work for hours.

[@mattone.0743]

I just completed your instructions. Everything seems to work. Thank you. However, when I loaded both JKSV and Checkpoint, they both crashed. Do you have any ideas? I'm pretty sure I have the latest installs.

[@IDX3Tutorials]

Check if there is an update for those tools.

[@fogpatrol]

after switching to unmodded, how do you switch back on the modded version?

[@IDX3Tutorials]

Through Hekate. You have to inject the payload like the first time

[@Clem12343]

i need help, please. everytime that I try to inject playload, it freezes and it doesn't work. my switch is not patched. do you why it doesn't work? please

[@IDX3Tutorials]

If you are sure about it then try another cable. More of them, one must work

[@Clem12343]

@@IDX3Tutorials thank you so much! it worked!

[@stromander7317]

hello, it says my switch version is 18.0.1, will i still be able to perform this?

[@IDX3Tutorials]

kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@2nyrovies]

hi when i want to open tegra rcm in my pc it says that it can’t execute on my pc … any help please !

[@IDX3Tutorials]

Try Installer from this site github.com/eliboa/TegraRcmGUI/releases/tag/2.6

[@Weebhideout]

Hello, im trying to update my cfw switch lite few hours ago. I want to update the atmos version and the firmware version, i don't have PC so im using Phone. My phone connect with my switch using a OTG Dongle when the new file replaced the old one and i'm reboot the switch, my switch won't booting to cfw menu. But i can access my Hekate

[@IDX3Tutorials]

Use this guide kzbin.info/www/bejne/n6mYdXyqiM9_a6ssi=TBU3fsE2bpT5HnP- And because you are on hw moded switch,you have to update payload.bin on sd card. You can do this by renaming new hekate.bin to payload.bin and replace with existing one on the sd card.

[@Weebhideout]

@@IDX3Tutorials thank you for the fast response!

[@Weebhideout]

@@IDX3Tutorials sorry im asking again, replace hekate.bin with payload.bin right? Do you mean Hekate.bin is hekate ctcaer 6.1.1?

[@CryptoMongols]

Im getting some errors can any1 help me pls. MISSING LPO (sleep) lib/ Missing Minerva lib/ Update bootloader folder/

[@IDX3Tutorials]

The SD files are not in the correct location or are not there at all. Check where you copied them

[@CryptoMongols]

​@IDX3Tutorials I did it over with no luck but I noticed files in the bootloader folder disappeared when i plugged SD(fat32) back into the pc so I checked and repaired sd under tools and tried it again, double checked before i ejected and everything was there but no luck. Pulled SD back out and even more files were missing now. Cleared the SD and loaded the setup I had before this and I was finally able to turn it back on but only the stock version will let me in which was my original issue before following this guide.

[@trannhatminhhoang8492]

I did it all and followed every step but then when I was trying to launch into Modded firmware, it gave me Yellow Screen and there's nothing else I could do beside shuting the NS down :/ Appreciate any help

[@IDX3Tutorials]

I think you messed something up with the atmosphere files. Try to copy only the atmosphere again.

[@TheHello069]

Mine says there was a fatal error trying to use fusse. It was working fine before

[@IDX3Tutorials]

If you are already jailbroken, use this tutorial kzbin.info/www/bejne/j57MiXiLi5VredE

[@Emmett_Peterson]

How do I fix it when I push launch and emuMMC it shows the triangle and then it’s says “panic occurred while running atmosphere”

[@IDX3Tutorials]

Error code?

[@Emmett_Peterson]

@@IDX3Tutorials the whole thing says “panic occurred while running Atmosphere. Title ID: 010041544D30000 Error: std:abort (0xFFE) Press POWER to continue.”

[@IDX3Tutorials]

You missed something if you followed my tutorial. Go to atmosphere/contents and delete the folder corresponding to the title id.

[@Emmett_Peterson]

@@IDX3Tutorials I don’t have a contents folder in Atmosphere

[@IDX3Tutorials]

@@Emmett_Peterson Organize the files as in this tutorial kzbin.info/www/bejne/j57MiXiLi5VredEsi=XZTKRDcOMoBe6AuL

[@Hazjc11_main]

7:33 when I booted into emuMMC it will just show a yellow screen until I shut it down, when I boot back up none of the modded applications are there, I tried to recreate emuMMC but it didn't work Edit: nvm i used a newer version of Atmosphere and now it works

[@IDX3Tutorials]

Organize files like in this videokzbin.info/www/bejne/j57MiXiLi5VredEsi=LIyXOeW0MIQhFY3z

[@makima9258]

yooo what version of atmosphere did u use? cause I have the same problem 😔

[@emanuelerubino5528]

as soon as I click "inject payload" no screen appears on the switch

[@IDX3Tutorials]

Your switch is probably patched

[@sanvirbandesha8101]

After I injected the hekate file into my switch it dose not boot in the menu and the screen u back what do I do please help me

[@IDX3Tutorials]

Have you checked the status at ismyswitchpatched.com/ ?

[@Honeymaus2186]

@@IDX3Tutorials I have the same problem and my Switch is green (not patched). Can you help? Thanks. :)

[@IDX3Tutorials]

Try another usb cable. More of them, one must work.

[@MysticGT_Gio]

Hey IDX3 whats that wallpaper you're using

[@IDX3Tutorials]

Chalk Gray E36 downloaded in wallpaper engine.

[@user-uv8py2uo3n]

Dear brother, I was running Nintendo Switch OLED with version 17, and after updating my device to version 18.01, now I cannot enter mod mode, I can only enter normal unmod mode. What should I do please?

[@user-uv8py2uo3n]

A fatal error occurred when running Fusée. Package2 neta is invalidt Press POWER to reboot.

[@IDX3Tutorials]

You must update the payload.bin on the sd card (rename hekate.bin to payload.bin and replace the existing one on the sd card) and follow this tutorial. kzbin.info/www/bejne/n6mYdXyqiM9_a6ssi=OllccBSuRetH-lDn

[@user-uv8py2uo3n]

@@IDX3Tutorials Thanks for the response, my dear brother. After following the steps, another message appears when you enter editing mode ERUNNC is forced but not enabled! Failed to launch HOS! Press any key

[@eth_fish]

I cannot see any applications in hbmenu. It says 'no applications can be found on the SD card'. I took the SD card out and confirmed that the switch file exists and contains .nro files. Any ideas why this is happening? Great tutorial, thank you!

[@eth_fish]

Found the issue.. i named my sd card 'switch'

[@IDX3Tutorials]

Who would have thought that it could be a problem, I'm glad you found a solution.

[@kmalulan1]

I am new to modding consoles, so this might be a dumb question, but will following this tutorial still work on my switch that is in version 18.0.1?

[@IDX3Tutorials]

Oamo if it is unpatched. But follow this guide kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@IDX3Tutorials]

Watch this before everything kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@kmalulan1]

@@IDX3Tutorials used the link in the description and found out my switch is unpatched. also, didn’t realize that you had an updated tutorial for 18.0.1, i’ll be following that one. thanks!!

[@marvinzimmerman1878]

whats the point of creating an emmummc file?

[@IDX3Tutorials]

If you only have sysmmc and decide to play a little online, you can get banned very easily. That's why we make emummc which is only for cfw. And sysmmc remains as before.

[@luvvv227]

whenever i press emuMMC it just says panic occured while running atmosphere. any way to fix this?

[@IDX3Tutorials]

Did you do every step from the beginning? What is the error code?

[@mmgandalfmm1274]

@@IDX3Tutorials I have the exact same thing, error code is: Std: :abort (0xFFE) Title ID: 010041544D530000 If you had a fix, that would be great!

[@mmgandalfmm1274]

@@IDX3Tutorials I have the exact same thing: Error Code: Std: :abort (0XFFE) Tried your Update Method. Same Thing. If you have a fix I would hugely appreciate it!

[@luvvv227]

@IDX3Tutorials I figured it out right after I commented with that exact method. thank you 😭

[@mmgandalfmm1274]

Worked for me! Thanks a lot! ❤

[@real.jepzryo]

Hi Love your videos 🙏 just have a question . Im on FW 17.0.1 / AMS 1.6.2 Is it okay to update now ? is this the final version already ? NOTE: There is no problem running all of my games as of now .

[@IDX3Tutorials]

This is not the final version of Atmosphere. If you want to update an already modded switch, you better wait a little longer because there is currently no simple solution for that, you will have many errors... If you are impatient, you can do a fresh jailbreak like in the video, but you will lose data...

[@real.jepzryo]

@@IDX3Tutorials Thanks . Maybe ill just wait . And wait for further updates . Thanks !

[@lukereschke8273]

Hey bro once I get the sd card into the switch it’s saying on the hb menu that no applications could be found on the sd card and to make a folder named switch when I already have a folder named switch

[@IDX3Tutorials]

The folder with .nro files named "switch", must be on the root of the sd card. If it is already there, check if there is anything in it.

[@lukereschke8273]

@@IDX3Tutorials what do you mean by root of the sd card? Do you mean just on the sd card?

[@IDX3Tutorials]

@lukereschke8273 Yes,on the root of the sd card, without subfolders. If that folder is in some other folder, it won't work.

[@lukereschke8273]

I messaged you on insta

[@MisterE345]

will this still work on 18.0.1? just saw that there was a new mini update and im starting from scratch.

[@MisterE345]

follow up i guess: seems like i shouldnt go to absolute newest but is there a way to update only to 18.0.0?

[@IDX3Tutorials]

kzbin.info/www/bejne/n6mYdXyqiM9_a6s

[@ggbrieel]

Hey my switch serial number is xkj1 can I do this, because I want to have a modded switch so badly. Thank u.

[@IDX3Tutorials]

Check it on the link in the description.

[@Sebi12345]

Up until like 3 months ago, my switch (serial number xaw1 1000500) switch was able to be jailbreaked but now after the new update patch from nintendo, i cant anymore. Will this guide? I shouldnt have updated my switch but it was an accident

[@IDX3Tutorials]

Just follow the tutorial. On my channel you also have a tutorial for version 18.0.1

[@Sebi12345]

@@IDX3Tutorials oh that's great! Thank you so much 😊

[@Sebi12345]

It worked bro, thanks you're a lifesaver and saved my switch files cuz I had so many modded files I couldn't play on until your video saved me thanks!! 😎 I subscribed which I never do, you deserve the extra subs bro thanks so much 🥰🥰🥰

[@IDX3Tutorials]

Thank you so much, I appreciate it!

[@zezozac8495]

My switch in old firmware 13.2.0 it's ok if I jailbreak 18.0.0 or firstable update the system firmware from 13.2.0 to 18.0.0 then jailbreak to 18.0.0 ?

[@IDX3Tutorials]

Right

[@IDX3Tutorials]

18.0.1 kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@markarthurdeluna3389]

Good day sir My memory card is currupted how can i fix it. :(( it lunch hetake but when I click lunch it turn to blue :( plsease help me

[@IDX3Tutorials]

If the sd card is bad, you have to replace it

[@Iamintrover]

can i jailbreak switch v2 with serial XKM7?

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@khai0895]

thanks for the tutorial ! but how do you download games with tinfoil ? couldn't find a link for it

[@IDX3Tutorials]

kzbin.info/www/bejne/oGWzYqiIfrypq7s Here you can see how to install .nsp/.nsz files. And you can Google the files... If you meant direct download through tinfoil, I don't want to make such a tutorial because the shops are constantly changing.

[@BellErIch]

I am on Firmware 17.0.1: Tinfoil v17 doesn't start anymore after updating to Atmo 1.7.0. How is your experience?

[@IDX3Tutorials]

you have to update the firmware or go back to the old atm.

[@BellErIch]

So tinfoil still works on your system?

[@IDX3Tutorials]

Yes, it works on 18.0.0 atm 1.7.0

[@BellErIch]

@@IDX3Tutorials THX for your answer. In my case it did't help. I'm on 18.0.0 now and I still can't start Tinfoil nor reinstall it :-(

[@IDX3Tutorials]

Have you tried deleting the tinfoil and re-downloading the latest version of the installer from the site?

[@tokiocrazy2]

I am on 14.1.2, will this work or should i update? My switch is unpatched.

[@IDX3Tutorials]

First update,then follow this tutorial kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@HybridTwisterVR0979]

cant install them on Erista switch. are ythere no hacks available for Erista or am i screwed?

[@IDX3Tutorials]

What exactly is happening? Was it already jailbroken?

[@IDX3Tutorials]

It should work, the only difference is that you need to rename hekate.bin to payload.bin and put it on the sd card.

[@HybridTwisterVR0979]

@@IDX3Tutorials yes it was, i accidentally updated it to 18.0.0

[@HybridTwisterVR0979]

@@IDX3Tutorials but it says that it is a mariko file to erista

[@HybridTwisterVR0979]

@@IDX3Tutorials it says Mariko pkg1 on Erista. so i need an erista sigpatch

[@JaayleeMusic]

To to get that wallpaper on the computer

[@IDX3Tutorials]

Download wallpaper engine on steam

[@JaayleeMusic]

@@IDX3Tutorials ok thank

[@kdkdkdndd]

can i do this on a nintendo switch lite

[@IDX3Tutorials]

You must have a mod-chip installed on the switch lite.

[@Upliftalex]

This also working with the mod chip?

[@IDX3Tutorials]

I'm not sure mate because I don't have one...

[@marcus05011993]

so i have 4 sd cards i modded 2 of them a while ago i got 2 more and i could not figure for the life of my why it was not working i tried from scratch to put it on the new sd cards i tried to copy both my other modded cards that work and that wouldn't work i tried old versions of atmosphere i couldn't figure out for the life of me what i was doing wrong until i watched your video and seen when you went to the atmosphere page you can open the assets bar to get the latest atmosphere i felt so dumb lol i kept downloading the version under that that has the assets downloads visible lol so thank you once i had the latest versions it was a wrap had both cards done in couple mins btw the music was superb

[@IDX3Tutorials]

LoL bro 🤣 Glad I helped you.

[@marouanbis1712]

Can i use a chromebook to mod my switch v1

[@IDX3Tutorials]

Yes, but you have to figure out how to run Windows applications (Tegra RCM) on a Chromebook. There are also web payload injectors that you can use instead of tegra rcm.

[@godfreyadams937]

whats the name of the song??

[@IDX3Tutorials]

Your Love is What I Need - #chillhopmusic by Soundroll

[@marvinviray5478]

why tegracmc not responding

[@IDX3Tutorials]

Try different cable

[@user-lr1bw9qf3n]

Does it work 17.0.1 on Nintendo switch oled

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@sivapetit1]

Whether uncharted vita game is payable?

[@IDX3Tutorials]

Just buy a Vita.

[@ElijahJohnson-qg4rg]

Question Does this work with a patched switch?

[@IDX3Tutorials]

No

[@sinameyer3975]

Do you need an rcm jig?

[@IDX3Tutorials]

Yes

[@KimuelAKASniperXpert3]

IS THIS FOR ANY S/N OLED???

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@one4jayjay]

Nice Vid Man! I tried this tutorial and got the payload injected successfully. but my switch never boots up to Hekate

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@hatoro1078]

It is work on nintendo switch oled?

[@IDX3Tutorials]

No

[@Lux_055]

I obviously need an not patched switch right?

[@IDX3Tutorials]

That's right

[@Lux_055]

Im out of luck then

[@ionpeen]

@@Lux_055not entirely, but you would need to pay somebody to solder a modchip to it

[@LZenxi]

Is 256 gb sd card good for jailbreaking switch or do I need 512 gb

[@IDX3Tutorials]

Anything over 64gb is fine

[@Clumpesy_YT]

@@IDX3Tutorialswait so is 64GB not good? Or is it 64GB or more?

[@bfny12]

kinda wish i saw this yesterday does anybody know how to get my switch back online after Nintendo Restricted it.

[@IDX3Tutorials]

Are you sure you are banned? What did it say?

[@bfny12]

@@IDX3Tutorials It said The use of online services on this console is currently restricted by Nintendo? This happened when i was trying to download Tinfoil to the console

[@bfny12]

@@IDX3Tutorials It said The use of online services on this console is currently restricted by Nintendo and this happens when i try and install Tinfoil

[@bfny12]

@@IDX3Tutorials It said The use of online services on this console is currently restricted by Nintendo and this happens when i try and install Tinfoil sorry if i replied 1000 times my phone is acting up

[@bfny12]

@@IDX3Tutorialsit said The use of online services on this console is currently restricted by Nintendo and this happens when i try and install Tinfoil

[@emanuelerubino5528]

is this tutorial actually for patched consoles?

[@IDX3Tutorials]

It is actually for unpatched, but it can also be used on a patched console if you have a mod-chip installed. You just need to rename Hekate.bin to Payload.bin

[@vzBandit]

Does this work on the patched switch?

[@IDX3Tutorials]

If you have modchip installed,yes. With one extra step

[@yaniramartinez5689]

What do u mean by jailbreak? Patched right?

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@xvell.]

is it possible to jailbreak a nswitch even if its patched?

[@IDX3Tutorials]

Without hardware modification you can't

[@xvell.]

@@IDX3Tutorials so we need a modchip installed then we’re good to go?

[@IDX3Tutorials]

@xvell. Yes

[@xvell.]

@@IDX3Tutorials thanks

[@Kohv-r9p]

does this work for nintendo oled

[@IDX3Tutorials]

Only if it has a mod-chip installed.

[@ahmedaboula3041]

can i do that to my switch oled

[@IDX3Tutorials]

Only if you have a mod-chip installed.

[@user-md4ho6ut9j]

How to check if switch is not patched

[@user-md4ho6ut9j]

Nvm mine is v2 so it is patched

[@IDX3Tutorials]

You have to install mod-chip first.

[@yasind5517]

does this work on 18.0.1?

[@IDX3Tutorials]

kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@ruski_bagnet]

does it work on 18.0.1 ?

[@IDX3Tutorials]

kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@TedWard-95]

Does this work for patched oled

[@IDX3Tutorials]

If you have a mod-chip installed, then yes.

[@TedWard-95]

@@IDX3Tutorials So i cant do this without a chip installed?

[@IDX3Tutorials]

That's right

[@flighttime84]

does this work on 18.0.1

[@IDX3Tutorials]

kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@user-ub3sv9lr6t]

Can you get banned from nintendo?

[@IDX3Tutorials]

Yes, if you do things you shouldn't. Look at my channel, there are tutorials on how to prevent a ban.

[@racaillshin1106]

Can I do it with a mac?

[@IDX3Tutorials]

webrcm.github.io/ Tegra RCM alternative for mac users

[@racaillshin1106]

@@IDX3Tutorials Thank you bro

[@IDX3Tutorials]

You're welcome

[@user-rv7or2fw7s]

Does it work 18.0.1? And Does it use internet?

[@IDX3Tutorials]

There will be a tutorial soon. I can't say until I try it.

[@IDX3Tutorials]

kzbin.info/www/bejne/faG9doJ7Zduhm7c

[@erik1445]

full mod ?

[@IDX3Tutorials]

Yes

[@erik1445]

@@IDX3Tutorials and please, I have a classic nintendo and I want to switch to android, how do I do it please?

[@IDX3Tutorials]

@erik1445 I haven't made a tutorial for aondroid yet, but I believe you can find one

[@Oozer_]

Is this method patched or not?

[@IDX3Tutorials]

kzbin.info/www/bejne/gIfMlZKAebJ5d6c

[@Oozer_]

I’m talking about the latest switch firmware

[@Oozer_]

The update

[@IDX3Tutorials]

Yes if you have mod-chip instaled.

[@yourgirlcallsme3660]

in 7:44 it shows me that the emummc is disabled and i did what u said and its still showes me that the emummc is disabled :( pls hlp

[@IDX3Tutorials]

Sorry for the late reply, is there even a file like in the video when you go in to select it?

[@yourgirlcallsme3660]

@@IDX3Tutorials yes