How to jump start using your NOCO Boost GB40

Рет қаралды 639,230

Күн бұрын

Learn how to jump start using your NOCO Boost GB40 UltraSafe Lithium Jump Starter in three simple steps.
Find more helpful information at:
Videos: / noco
Support: no.co/support
Shop: no.co/gb40

Пікірлер: 231

@tanchoandroid229 Жыл бұрын

The best thing about this video is that it is quick and clear. In 37 seconds it tells you everything you need to know to jump start a car, and when you're in a situation where you need to do that, you don't want any long-winded videos.

@rk3689 Жыл бұрын

Yeah. I hate when an article or video about a problem online starts with: "First, let's talk about the history of car battery jump starters".

@tanchoandroid229 9 ай бұрын

@@toddnewhook6940I've not had any problems with mine. Maybe yours is faulty?

@Countcho 2 ай бұрын

Yess

@eternaladventure-wm5fn Жыл бұрын

If your battery is under 2v the jumper will not detect a battery. The charge indicator will not blink. You can bypass this by holding the override button (red exclamation) until it starts to blink. This will also disable safety features on the jumper.

@Sunokanse Жыл бұрын

THANK YOU!

@artemis3120 Жыл бұрын

This comment is a life saver here

@Easy.Fixxxx Жыл бұрын

I was trying to connect cable 10 different way and holding the power button nothing was help then I saw your comment and it work in secs Thanks for your help.

@RosserNFT Жыл бұрын

Thanks.

@diamondnicole6736 Жыл бұрын

This comment is the real MVP. 🫡👏🏽

@saprissa9 11 ай бұрын

You need this for your family and especially if you're a loner like me with no friends who could help you in a bad situation. I've used it twice in 5 years. A life saver.

@mtlicq 9 ай бұрын

You could also help someone in distress out and really get appreciated for it

@wayne6777 8 ай бұрын

I’ll be your friend. You don’t vote republican or have body odour, do you?

@Meanoldwoman2013 7 ай бұрын

I have to use mine today. My Honda Accord retaliates 😢 by going dead if I don't drive it enough.

@MERTVARIŞLI37 4 ай бұрын

3200 dizel araç için uygun mu?

@Tom_TTT Жыл бұрын

I’ve used this three times( twice for my wife and one for my own car), life saver and amazing product. Highly recommend.

@SeaofThieves_7 Жыл бұрын

bruh that means you need to get new batteries for you cars 😂

@pabhb 10 ай бұрын

@@SeaofThieves_7😂😂😂😂😂😂

@OkolieRaymond 8 күн бұрын

Extremely short but educative video.

@desmondsilva3313 Жыл бұрын

I just finishing boosting my car with this thing. It is a real time and money saver, and really helped in a jam where I had nobody else to help me. It did take a bit of fidgeting with the clamps to get a good connection, but I eventually got the Boost to detect the car battery. I would have had to dish out around $80 to the tow truck company to come and give me a boost or depend on my neighbour who was at work when this happened. Thank God I bought this thing. Definitely a good buy.

@atomicerectus Жыл бұрын

Had my old, cheap jumper box crap out on me multiple times leaving us stranded, went to CT for a jump one of the times and this is the one they had in the garage for shop and loaner use. Guy was like "it's not fully charged so I don't know if it's going to work", showed like 2/3rd battery but it started my truck on the first turn. I asked if they sold this unit in the store and they showed me where but it was it was like $200. Finally snagged it on sale and I don't have much else to say than I'm psyched to have it and very impressed with the quality! I am curious though, if you've used it much, 8 months later how is it holding up?

@tinajeppesen5948 Жыл бұрын

My dad sent it to me ❤️Yes it’s great 👍

@Countcho 17 күн бұрын

Love this thing. Jumped my car today, saved money

@rivasoutdooradventures 4 ай бұрын

This thing saved us in the middle of the woods in a hunting trip! Temp dropped down to the 40’s and the battery in my Silverado was dead. This jumped it right up like a charm. Have had to use it several times. Works perfect!

@Cerbenix_ 8 ай бұрын

Just started my Lexus GS300 3.0l with the GB40. Completely no issues. Threw on the clamps, turned the device on and the car started like it was on a fully charged battery. Happy with the purchase.

@BlessedVive 2 ай бұрын

Thank you need to jump started my car asap this morning!!!! And this video was super quick and right the point thank youu!!! My car is back on and on my way to church!!! Hallelujah thank youuuu

@seanfay279 3 ай бұрын

I have one of these Chargers in every single one of our cars and our kid's cars. Sometimes it starts their car, sometimes it starts their friends car, but every time it prevents someone from having to catch a ride home or leave their car somewhere. My vehicle has the larger version - because I drive a diesel F-250, and I have used it to jump everything from a car broken down in the parking lot to a lawn mower to a semi. They are absolutely worth the money. They also make pretty darn good gifts from Dads and uncles, especially if you buy the Noco carrying case made for them.

@NOCO 3 ай бұрын

Thanks for sharing!

@royalfalcon6785 3 күн бұрын

It works like a magic highly recommended!!!

@eduardosanchez7827 5 ай бұрын

Guys thank you for such a straightforward video. I just used my NOCO GB40 on my wife’s suv for the first time since I got the device 6 months ago. The NOCO still had charge (although very little) so I think I should check it maybe once every 3 or 4 months. Anyways, I’m sold for a second unit!

@DiginDominic9 7 ай бұрын

Works like a charm, remember to press the power button after attaching the clamps to detect the battery. Real life saver.

@MtaBus5102 Жыл бұрын

I've had mine since 2019, it's certainly saved me in the middle of the night in the middle of nowhere in the winter before, I always have it charged and on standby in the car always.

@XenaTheQuadCamBikah 4 ай бұрын

I just bought this item. I provide on site small engine repair at peoples homes and this will come in very handy when I happen upon a lawn tractor with a dead battery. Also plan on packing it when I take long motorcycle trips. Hope it works out well for my needs.

@stephenwhincup7768 Жыл бұрын

The battery went flat in my van sorting an ignition switch out. Couldnt move the van or get close with jump leads. Bought this hoping for the best. Charged the unit for a couple of hours to get it fully charged. Connected it to the van and it fired up straight away. Brilliant!!!! 2.4 diesel no effort at all.

@apolotorales993 7 ай бұрын

I used on a Honda Accord 2018 and it work perfectly,

@natedamak 9 ай бұрын

Thanks! I just jumped my company vehicle with this video!

@mygg15 8 ай бұрын

Just used mine for the first time in -20 celsius (although noco was freshly charged and at room temperature) and surprisingly it worked first time and it was sooo easy! When i connected the noco before trying to start the car the car’s lights went on. So maybe shut off everything in the car that uses electricity before connecting as not to drain the noco unnecessarily

@geforce9009 Жыл бұрын

Went out to my car after work and what do you know, dead battery. Plugged in my GB70 and had to use the red over ride button because my battery was severely drained. Started right up with no problem. Absolutely saved my *** and since then I’ve helped out a few friends with it… awesome!

@wilindrocca 8 ай бұрын

Thanks for this very succinct and helpful video - watched it as a refresher before jump starting my car using the GB40 Boost Plus. Worked like a charm - awesome product!

@lindawheatley6822 2 жыл бұрын

Thank you . Wasn't sure how to do it . Your instructions were a great help.👌👍

@gaelvaladez534 8 ай бұрын

Holy crap this guy really works. 😂

@eddieryan63 4 ай бұрын

Love noco chargers and jumper packs!!!!

@Trethe1_ Жыл бұрын

Had an alternator issue and my car suddenly died, used this and got it working in no time

@TheLifeisaParade 3 ай бұрын

It worked. Eureka. My car sits more now since I work from home.

@Countcho 17 күн бұрын

One of the best devices you can own. HIGHLY recommend. Saved me 2x now and will probably save me again.

@Green3Eagle 2 жыл бұрын

The instruction manual says to connect the Positive clamp first, followed by the Negative clamp. After the car is started it says to disconnect the Negative clamp followed by the Positive clamp. Unless by chance you are using a positive grounded vehicle, which the manual says is very rare.

@FreedomofSpeech865 Жыл бұрын

Thanks!

@Green3Eagle Жыл бұрын

@@FreedomofSpeech865 I really like this product. I'm looking for people who need a jump start!

@davidseitz1510 Жыл бұрын

That's exactly how you should take any jumper cables off safety. Good looking on that!!!!!

@cttbbt6640 9 ай бұрын

And in this video they did it backwards

@jivekiwi 11 ай бұрын

Worked this time! Stuck in a traffic jam and I had a loose terminal 😒 jumper leads would have made it way more embarrassing. When I bought it, it had absolutely no charge which was pretty annoying though.

@Woodlawn22 2 ай бұрын

Since this is a video made by the NOCO company I think it would have been nice if they had more clearly said to connect the red to positive FIRST then connect the black to negative or car frame LAST Then when disconnecting unclamp black FIRST then red LAST. I am a newbie at this but that part seems important to me.

@mrcomenttoe2009 4 жыл бұрын

I just wanted to tell you guys that I think this your products are super fine and the keychain necklace flashlight I got is the best in the world I've had many flashlights and many lighting devices for over 40 years just cool

@SmoothSoulM 8 ай бұрын

Glad I watched this because I might of Left the Booster on and disconnected it 🥴😂⚡️instead of turning it off first

@DiginDominic9 7 ай бұрын

what would have happened if you disconnected it properly without tuning the unit off @NOCO

@SmoothSoulM 7 ай бұрын

@@DiginDominic9 probably would blow up or something

@AnthonyDetry Жыл бұрын

The GB 40 has never worked for me the first time. I do unplug it then reattach it then turn it on. 3 times being the shortest amount of time that it work. On two occasions someone with a larger model was able to change me in one shot. I don’t know if my GB40 is still under warranty but I was thinking of returning it for a bigger model

@BapFootballHD Жыл бұрын

Hi, have you changed to a bigger model? Does it work now?

@b1m3x8 Жыл бұрын

Worked once. Now it just clicks and doesn’t provide any voltage boost when it says it is.

@tobylariosnyc Жыл бұрын

Wow. You just save my time

@akissparaskevopoulos Жыл бұрын

Thanx for the video.

@wynnmatthews1858 2 жыл бұрын

Mine is a piece of junk. I bought it as a back up to another brand. After about a year, I decided to give it a try (and yes, I kept it charged), the power wouldn't come on. The flashlight worked, and when it came on showed full battery charge. Absolutely will not jump a car nor charge phones/devices. Good thing I wasnt out on the road or the NOCO would have left me high and dry. The other charger (S type brand from COSTCO) was forty dollars cheaper and has yet to fail me over two years of service. 100 bucks down the drain.

@NOCO 2 жыл бұрын

I'm very sorry that you're having issues with your Wynn. Please contact our support team for assistance. You can reach them by email at support@no.co (NOT ."com") they also have a Live Chat option on our website here: no.co/support

@parkerbohnn 2 ай бұрын

Buy one with at least 2000 milliamps peak boost. The ones with only 1000 generally only last a year or so because of the low power output.

@marknightingale8932 7 ай бұрын

A bit late to the party but thanks for this

@finbarrcorcoran9342 5 ай бұрын

Also will start your car if you have a faulty starting motor,Saved my ass a couple of times.

@h.Johnson00 3 жыл бұрын

What is the difference between the Boost Plus and the Genius Boost? Both GB40, 1000A, 12V.

@Gorbyrev 4 жыл бұрын

I have had very little success with my GB40 starting my VW Transporter T5 2.5TDI . The battery has a parasitic drain which intermitently flattens the battery. The only time the GB40 has worked was when the engine turned slowly but wouldn't start. I always have it fully charged. I would be grateful for any advice.

@nigeltaylor58 4 жыл бұрын

You need something a lot bigger than a Noco GB 40 to start your VW Transporter T5 2.5TDI, An Diesel engine that size will kill your NOCO GB 40. Suggest you get a NOCO GB 70 or a NOCO GB 150. You’re asking your NOCO GB 40 to do the impossible to start your transporter. I use a NOCO GB 150 to start my Audi A3 S Line which has a 2.0 litre engine and it starts it with ease.

@Gorbyrev 4 жыл бұрын

@@nigeltaylor58 I appreciate the reply and that would make sense. When I bought the GB40 it was advertised as being able to start a 3.0l diesel or a 5.0l petrol engine.

@CADDESK70 4 жыл бұрын

I use an NOCO GB 70 to start our Chev 3500 6.1 Duramax Diesel P/U when needed, no issues. I have an NOCO GB 40 to start our 4 and 6 cyl cars if needed. And I always carry one of them in whatever vehicle that I may be traveling in...

@NOCO 4 жыл бұрын

The GB40 is rated for jump starting up to 3.0L diesels. Depending on how depleted the battery was from the drain, Manual Override may be necessary for the jump start. Please contact NOCO Support directly on the NOCO website for further assistance.

@qanononabong8491 3 жыл бұрын

@@nigeltaylor58 Negative. The GB40 is adequate. His battery and alternator need to be checked for inadequacy.

@totalrise1811 3 жыл бұрын

Just wondering, once the car has been jumped and running, do I turn off car and then NOCO and remove it? or Keep car on and turn off NOCO and remove it? Thank you.

@turveymark 3 жыл бұрын

Keep the car on, the car will take a while to recharge its battery before it is ready for an unassisted start

@yasir1only 22 күн бұрын

Can I fully charge my car battery with this and how would I know it’s fully charged?

@DennisAllums Жыл бұрын

Expected a one-page instructions instead they sent a bible. geez. why so big. luckily i found this video.

@patrickc1792 3 жыл бұрын

I have a GB40 and was pretty unsuccessful boosting a 2013 Honda CR-V with it. It actually worked 1/4 of the time (during summer, mind you). The remaining 3/4 of the time were during winter and ended-up using my other car to boost the CR-V. Last failed attempt, battery was at 11.37v and it was -1C outside. LED would cycle with the relay clicking. Reading the manual, it says that the battery may be defective. Right. I then tried it on my other functional car resulting in the same behaviour. WTH? That battery on that working car is also defective? I have made my mechanic do a battery test on the CR-V which the battery came out has “healthy”. Anyway, after seeing video where people are able to jump start a car without a battery attached, I am left to think that my GB40 is defective: I find the one-year warranty to be very thin. In my case, it worked the first time (within one year of having bought it). The second attempt using the GB40 was after the one-year warranty - SOL. Makes no sense to provide such a thin warranty since you are not going to use this thing every day. I bought this unit to have a certain “peace of mind” should I come to a non starting vehicle after a day of work. Very far cry from what is happening: On the last two attempts, I rolled my eyes saying “Ok, I’ll try that thing, maybe it’s going to work this time?”. I lost confidence in the product and find that the unit did not delivered as advertised. I was lucky that my four attempts where in my driveway with the other car available to boost.

@NOCO 3 жыл бұрын

We're sorry to hear you had trouble jump starting your vehicles. The clicking is part of the internal safety features of the Boost. The clicking happens because the internal relay is switching off and then back on quickly while the Booster checks to make sure a battery is still connected. This can happen if the battery in the vehicle is weak. You can try cranking the engine longer than expected to put an additional amp load on the Booster. If attempting to crank the engine longer does not resolve the issue, you can place the Boost in Manual Override to bypass the relay. To enter Manual Override in these situations, you need to REMOVE the Boost from the vehicle's battery, which will stop the percentage LEDs from chasing, and hold the "!" button for 3-5 seconds until the percentage LEDs start to chase again and the white Boost LED starts to flash. The Boost will not allow the Manual Override to be selected if it is already in the Boost mode with the percentage LEDs chasing, so you have to disconnect the Boost from your vehicle's battery first before putting it into Manual Override. Be cautious as it turns off the safety features of the Boost like spark protection, and reverse polarity protection. Connecting to a ground away from the battery is recommended in this scenario. If this is not helpful, we do have courtesy options available to assist with replacing NOCO products even if they are out of warranty. Please contact NOCO Support directly for assistance.

@patrickc1792 3 жыл бұрын

@@NOCO I have tried the manual override which worked (putting my overall experience at 2 successful boosts in 6 attempt). I was tempted to write about this but waited until I needed another boost (not to celebrate victory too soon). As expected, I needed another boost not so long ago and this time, the unit was unable to start the car (2/7 attempts). By the time I was to write this comment, I had to perform ANOTHER boost - which, obviously, failed again (2/8). I metered the result: -17C outside, the GB40 was delivering 11.73V to the battery (it was charged at 100%). I verified the voltage output while not connected to any battery and it is 12.35V. That was it! I then went and bought a brand-new battery (the previous was of 11/2017). I then connected the GB40 to it and tested its behaviour. The relay clicked just like on my old battery and on my GF’s car battery. I contacted Noco Customer service to learn that the fees outside warranty are 56,23$ USD to get a new unit. After viewing other videos, I decided to go against it as video as such shows exactly what I am experiencing: kzbin.info/www/bejne/gH-bcmWkfrKIjaM. I am extremely deceived in the product which brings up again that warranty of one year - which is far from being sufficient and totally inadequate IMO.

@rainsf0rd 2 жыл бұрын

@@patrickc1792 I'm having similar frustrations ... Constant relay clicking and sub 12.0v showing at battery on boost. However, I realized now I haven't been entering manual override mode as per NOCO's reply above. Didn't know you had to hold the override _before_ connecting to the battery. I'll see what happens next time. Not that I see why I'd need a manual override for a battery that tests at ~500 of 750 rated CCA, and was reading 11.5v on my dash. It's weak, sure, but not dead. Just tired from trying to crank a finicky rotary engine over with fueling problems. I figured 1000a of portable power would sort me out for when I need to crank for extended intervals. Nope. Relay noise and frustration.

@duyle1167 Жыл бұрын

Can use 2 GB40 to jump a 24v starter? Every GB40 hold a battery.

@Justinrojones 9 ай бұрын

Just to clarify, under normal operations I should connect both the positive and negative clamps to their respective terminals on the battery and not to a separate ground?

@defenderovich1898 Жыл бұрын

What do I do if I have to use the manual override, then turn it off and back on without the manual override, it starts detecting the battery but would not crank the engine? The clmps connected securely. The car was sitting on th elot for close to two weeks. A 2 year old Bosch battery made in Germany.

@BapFootballHD Жыл бұрын

Try manual override: Disconnect all clamps. Press the "!" in 3-5 sec until the BOOST light is on. Connect clamps (positive + first, negative - second), you will see it sparkling to the negative, start the car.

@docglock1932 3 жыл бұрын

Can this be used to jump start a garden tractor? Can the unit be charged from a power strip plugged into the home?

@dane6510 11 ай бұрын

I've gotten this thing to work once then never the next 2 times. Idk if my battery is dead or what

@whoever_you_want_me_to_be 3 ай бұрын

Which cable do you hook up first and which one do you take off first it doesn't tell me anything

@NOCO 3 ай бұрын

This depends on your vehicle. Most vehicle's are negative ground, in which case you'd connect the positive cable first, then the negative and remove the cables in the reverse order. If your vehicle is positive ground, which is less common, you'd connect the negative first, then the positive, and remove the cables in the reverse order.

@Zefinfer 14 күн бұрын

is it safe to store these in trunks of cars in florida during summer?

@notadumbblond3 Жыл бұрын

So how would you know if someone doesn't have a lead acid battery? And how do you know when the battery has a positive ground?

@SandwichFresh 11 ай бұрын

Hello, can i use it also for charging and topping up the car battery like a trickle charger or battery maintainer please? Sometimes im driving just once in 2 weeks. Thank you

@suyan9733 3 ай бұрын

I bought one of this in the hope of jump starting my 2021 toyota hilux sr5, I connected all the clamps as instructed, turned the unit on and wait for the boost light to come on, then started the engine, engine turned over a little bit but unable to fully turn on, the noco then overheated and showed the exclamation light blinking, 2 bar s of battery already drained, I don't know what I did wrong, really need some help.

@parkerbohnn 2 ай бұрын

Lithium polymer batteries degrade over time. They usually lose 20 percent every year.

@hunterh.4357 11 ай бұрын

This might be a dumb question, but when you have the NOCO fully charged does it matter where you store it? Would it be fine to keep in my car during winter (below freezing) or during summer (up to 100° F)

@NOCO 11 ай бұрын

The recommended storage temperatures are -4F to 122F (-20C to 50C). The Boost should not be in temperatures exceeding 176F (80C) under any condition.

@parkerbohnn 2 ай бұрын

Storing it in extremes heat will shorten the lifespan of the battery/batteries.

@iaincathro3373 8 ай бұрын

Unfortunately mine is not starting the vehicle. It also completely loses charge after trying to start the vehicle. What am I doing wrong?

@tinajeppesen5948 Жыл бұрын

I read not to leave it in a hot car. What? It’s for emergencies so of course u keep it n the car…right?? I live in Florida it said heat could be an issue

@NOCO Жыл бұрын

The recommended storage temperatures are -4F to 122F (-20C to 50C). Since the unit does contain an internal battery, storing the Boost outside of these ranges can cause damage to multiple crucial components of the jump starter. The Boost should not be in temperatures exceeding 176F (80C) under any condition.

@daysiaaaaaaaaaa 10 ай бұрын

I wish the noco boost kept the battery charge from when you last charged it fully. I just pulled mines from the trunk and it’s basically dead.. whats the point of keeping it in your car for emergencies if its gonna die 😭 and keeping it in the house is pointless if you’re not at home and your battery dies.

@daysiaaaaaaaaaa 9 ай бұрын

@@toddnewhook6940 OMG every TWO WEEKS?!? Whatttt that’s too much 😂

@verdinec Жыл бұрын

If the lights chase but the jeep won't start, what might be a possible cause of it not starting?

@hollowedbethyknight 6 ай бұрын

Will this work on a 2006 Chrysler 300 2.7L? Please and thank you!

@parkerbohnn 2 ай бұрын

Did they steal the name from the trotting horse Noccalula? Noccalula was a world champion trotter.

@candacewegner3624 5 ай бұрын

I’ve lost the clamps to my original purchase.. will any clamps work with this product?

@NOCO 5 ай бұрын

The appropriate clamps for the GB40 are part number GBC003, they can be found on the NOCO website as well as Amazon

@Motosem Жыл бұрын

İ have a gb 40 I lowered the my motorcyle 1200 cc battery energy to try but it cant started!.

@johnnocanuck 9 ай бұрын

I've tried to use my GB40 a few times, but it usually doesn't work. I don't know why. It's always at least 75% charged.

@NOCO 9 ай бұрын

I'm very sorry that you're having issues with your GB40. Did you attempt the jump start using the Manual Override feature as well? The Boost units are designed to detect a battery first and then apply the appropriate charge for jump starting. If the vehicle battery is below 2V, the Boost will not be able to detect it and thus will not apply voltage to the clamps. This is part of the built in safety features of the Boost. You can force the jump start current to the clamps by using Manual Override. Use Manual Override cautiously as it also turns off the reverse polarity protection and spark protection. You can enter Manual Override by pressing the red "!" button for three to five seconds. If you did attempt this and were still unable to start your vehicle, please contact our support team for assistance. You can reach them by email at support@no.co (NOT ."com") they also have a Live Chat option on our website here: no.co/support

@plightn 4 жыл бұрын

Sorry but I was taught never to attach the negative part directly to the battery only to a ground on the engine or body, is that wrong?

@theFilch 4 жыл бұрын

For car to car, Starter/Running car = both cables, Dead Car = Positive to batter, neg to metal ground I would follow the manufacturers instructions when it comes to the GB40, connect both.

@NOCO 4 жыл бұрын

The clamps of the Boost can be safely connected to both battery posts, or positive clamp to battery and negative clamp to ground.

@ih1809 Жыл бұрын

That's what it says in the manual - either both clamps to the battery terminals or 1 on the body chassis.

@tomc8115 6 ай бұрын

Attach red first or black first? Or, doesn't matter?

@parkerbohnn 2 ай бұрын

Attach the red first.

@brandondeener 3 жыл бұрын

Every time I hook up to my Honda the red ! Is highlighted and won’t let me start.

@duellcollins7989 Жыл бұрын

This thing can't jump nothing. I am trying to jump off my caddy am it does work

@hunterharlow93 8 ай бұрын

Ive attempted to use this one 3 different vehicles and it wouldnt start a single one

@DiginDominic9 7 ай бұрын

Did you forgot to press the power button on the device which was the mistake I did.

@tenthumbs9 10 ай бұрын

My V6 truck turned over once and stopped, I let set for too long , I tried using this and it would not jump it off !

@NOCO 10 ай бұрын

@tenthumbs9 10 ай бұрын

@@NOCO , it was my fault , I realized that I had blown a fuse to the starter

@cemjgamer7388 Жыл бұрын

How do you know if the device itself needs charge?

@lookoutnow4996 Жыл бұрын

When the power level is in the red... I usually charge mine up every 6 months. I haven't had to use it yet, I just like to have my power level in green.

@cemjgamer7388 Жыл бұрын

@@lookoutnow4996 thanks

@m4xripper Жыл бұрын

I bought my Norco boost plus GB40 a week ago I charged it fully and today my neighbor needed a boost so I put it to the test and it didn't work so I had to do it the old fashioned way with jump start. I then came to realize the device was died and had no charge.

@Solittletimetoomany Жыл бұрын

I just tried it and it would not start my vehicle. The starter cranked it but engine would not start. Even tried jumper cable and that didn’t work. Battery was fine until a week ago.

@NOCO Жыл бұрын

@Solittletimetoomany Жыл бұрын

I didn’t press it long enough I think. Thanks for the info.

@MinhCobos-q1o Күн бұрын

Cronin Shoals

@BapFootballHD Жыл бұрын

I have my BMW F30 tuned N20 engine and fail everytime using GB40, the GB40 completely dead when I hit the car start button and can not jump start my car. Do I need to upgrade it to GB150?

@BapFootballHD 6 ай бұрын

Thought NOCO wasn't good but it turned out GB40 is not enough for my tuned F30 although they said that it would work up to 4.0 litters diesel and my car is 2.0 diesel. I gave it another try and bought NOCO GBX155, just on that day my car accidentally got a completely drained battery, jumped start it with GBX155 and succeeded!

@ChristyJoseph-j2n 27 күн бұрын

Schiller Estate

@unaladem 4 жыл бұрын

turkey distributor for VW group vehicles, he said not enough gb40 model. I should have got a gb50. but shouldn't even gb40 work with 6 liter models? My car vw polo 1.4 gasoline automatic.

@NOCO 4 жыл бұрын

The GB40 is rated for gas vehicles up to 6.0L and diesel up to 3.0L.

@MaryJackson-n3v 27 күн бұрын

Sipes Way

@LattimoreFay-d2u 29 күн бұрын

Katlyn Circles

@lucasprado6705 Жыл бұрын

It worked on my Mazda 3 however when i turned off the car it wouldn’t turn back on. I needed to us the exclamation mark button. How long do i need to leave it charging? I removed right after it worked and then turned off the car.

@RE-nv4we Жыл бұрын

You connect the device and turn it on, turn on the car (engine works), then turn off the device and remove the black clamp then the red clamp, close your hood. Let the car run idle for 10 minutes (turn off the lights first), and then drive the car for about 20 min, this will replenish the battery. If you just jump start and then turn off the car, you accomplished absolutely nothing and will have to jump start it again.

@Eloisaaaaaaa 2 ай бұрын

@@RE-nv4weThank you SO much!!

@RE-nv4we 2 ай бұрын

@@Eloisaaaaaaa If you did this, keep in mind that the battery is no longer "healthy" and needs to be changed, or connected to a trickle charger daily (the small charger with low voltage).

@neilboswell8706 4 жыл бұрын

Price??

@jamessummers5936 Жыл бұрын

What does solid red error light mean? I connected it to a battery in one vehicle and red error light came on, so I connected it to another vehicle and the lights were "loading". Does this mean the battery in the first vehicle is completely dead and need to be replaced?

@canadianstarbuck Жыл бұрын

it means the battery is too low for jumper to start. All you need to do is press on the red exclamation button for 5 seconds and it will start the jumper for good

@jamessummers5936 Жыл бұрын

@@canadianstarbuck Preciate the response, and yeah I manage to figure it out. You basically have to manually override it to get it to charge really low batteries.

@happydays1165 8 ай бұрын

Big let down will not start my vw crafter 2.5L 5 cylinder

@rickjames5998 3 жыл бұрын

this is the TL:DR version of their video. lol

@ClaraDelia-s7k 27 күн бұрын

Benton Mission

@HughGloria-l9m 27 күн бұрын

Walker Crescent

@CopperfieldElma 12 күн бұрын

339 Davis Radial

@ИсидораАлександрова 25 күн бұрын

Lawrence Locks

@KatharineSnow-t4p 28 күн бұрын

Reilly Glens

@MarcCheshire-v1w 27 күн бұрын

Kautzer Streets

@BushVerna-u5z 29 күн бұрын

Maggio Route

@Spotteddeathboy 2 жыл бұрын

If only pt cruiser wasn't difficult. Positive and negative are far apart .2002

@shakamulaka 3 жыл бұрын

This thing wouldn't even start a 4cyl Subaru Legacy. The roadside assistance came and had no problem starting it with the GB70, so clearly the advertising of 6L for the GB40 is completely wrong.

@NOCO 3 жыл бұрын

We're sorry to hear you had trouble jump starting your vehicle. Did you attempt the jump start using Manual Override? Sometimes with a weak or low battery, the Boost can have a hard time ""seeing"" the battery and will cut power to the clamps intermittently as it ""loses sight"" of the battery. You can try cranking the engine longer than expected to put an additional amp load on the Booster. If attempting to crank the engine longer does not resolve the issue, you can place the Boost in Manual Override to ensure you're getting the full power necessary for the jump. To enter Manual Override in these situations, you need to REMOVE the Boost from the vehicle's battery, which will stop the percentage LEDs from chasing, and hold the ""!"" button for 3-5 seconds until the percentage LEDs start to chase again and the white Boost LED starts to flash. The Boost will not allow the Manual Override to be selected if it is already in the Boost mode with the percentage LEDs chasing, so you have to disconnect the Boost from your vehicle's battery first before putting it into Manual Override. Be cautious as it turns off the safety features of the Boost like spark protection, and reverse polarity protection. Connecting to a ground away from the battery is recommended in this scenario. If you're still having trouble, please contact NOCO Support directly for assistance.

@shakamulaka 3 жыл бұрын

@@NOCO I think it works better when the booster is warm(not left in a sub zero car) because it did start it at that point. I'll try the manual override next time regular boost doesn't work. I'm back to being a fan, thanks!

@gamingboy1220 3 жыл бұрын

@@shakamulaka Hi there, how much did you pay for this model (GB40) ?

@shakamulaka 3 жыл бұрын

@@gamingboy1220 About $130 CAD

@claudeisaac5494 Ай бұрын

Worked once and refuses to charge beyond 25% since then. Wasted my money.

@ByronOliver-v7d 29 күн бұрын

Osinski Parkways

@scurvydigdog 4 жыл бұрын

I have the GB70 and it starts my Toyota Landcruiser 4.2 from flat, however it will not start my 1.2 Suzuki Swift ! Anyone tell me why ?

@NOCO 4 жыл бұрын

It's possible that the Swift's battery was too depleted for automatic detection, and Manual Override was needed for the jump start. Please contact NOCO Support directly on the NOCO website for assistance.