How To Kill RUST and NOT Have a GREASY OILY MESS!.. Rustproofing Items That are Frequently Handled

Subscribe to our New Channel / mrknowitallguru
and learn to do almost everything DIY! Ok here's the deal, everyone has items that need rust protection, things you handle all the time...most rust proofers are greasy and messy....for instance, a trailer needs protection as do lawn chairs...do you see where I'm going with this? Oily rust proofers are good for out of sight and non handled items. Oh! and clear coats will not give you the protection you are looking for, you need a clear/ transparent rust KILLER
For areas that are not handled see this • How To Make Your Own R...
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
USA TOOLS
Rust Stop amzn.to/3qrZ7Ax
Best Air Grease Tool amzn.to/3A1x54T
Best Grease Clamp Tool amzn.to/3AbHrPV
Best Full Synthetic Grease amzn.to/2T9gwU2
______________________________________________________________
Canada Tools
Rust Stop amzn.to/3gZukd2
Best Air Grease Tool amzn.to/3xQFSVk
Best Grease Zerk Tool amzn.to/3h25Lus
Best Synthetic Grease amzn.to/3x1BfaS
_____________________________________________________________
UK Tools:
Best Rust Stopper amzn.to/3aFeZtH
Best Air Grease Tool amzn.to/3jhKi3B
Best Grease Zerk Tool amzn.to/3h0gRlc
Best Grease amzn.to/3jvaNmr
_____________________________________________________________
Germany Tools:
Rust Stopper amzn.to/3rsbYDZ
The extremely small compensation we receive from these amazon links helps to keep our channel
available to you all for FREE!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Hello Great Subscribers, We have had many of you ask how to rustproof something that is handled frequently or items that cannot be repainted like our trailer. Well, this video will show you that nothing you have now needs to rust and our process is invisible doing the job behind the scenes killing the rust. Oh! GUYS don't tell momma about this or she will have you doing her metal lawn furniture lol ***Quote of the day: Change is the only constant in life. One's ability to adapt to those changes will determine your success in life.**** Benjamin Franklin

[@kylemlm]

Mike,My Biggest pet peeve with painted trailers. I only buy galvanized trailers if it is an option. You have to be ready for worst traveling with trailers. Every fill up / grease and check air.

[@Normalhowaboutyou]

Yes thank you I appreciate it however like a magician you’re moving the can around nobody can see it. I think I know what it is but even when I freeze the frame I can’t see the complete can I don’t know what the product is that you’re using. I’m grateful for your video I just wanna know how to do what you’re doing. Thanks again God bless

[@SweetProjectCars]

We're with you on that Kyle! Not sure what we will do with this one, looks like another project :) Thank you for the view and comment, it's always great to hear from you my friend. Have a fantastic weekend. mad Mike the hammer SPC

[@SweetProjectCars]

All of the tools and products are always in the "SHOW MORE" area of the video description, see these pics on how to find the show more for any video on youtube.......use static pictures as a guide photos.app.goo.gl/4fbqwpXC3Koqsv8o7 for a desktop computer or here photos.app.goo.gl/dY6Wz16qnroYHDsK6 for a cell phone. Hope this helps Geoff, thanks for watching. mad Mike the hammer SPC

[@snake_eyes_garage]

I have been using this product for touching up car chassis and motorcycle frame that I don't want to paint, either because I want to keep the original paint or I am just spot treating and will get to it later. Also works on old chrome. I wondered why sometimes it worked and sometimes not, and that was due to the area being dirty and/or greasy, so now I degrease first (or if I'm lazy, blast it with brake cleaner and then the rust converter). If I'm good with leaving a mark or plan to paint over, my favorite (again, lazy) product is the rustoleum rust converter / primer - same applies to that as well, degrease first then apply wet.

[@SweetProjectCars]

Thanks for watching and sharing, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC

[@pmb0001]

So that is a ‘Don’t Buy’ from Rocky’s Trailers I guess? Given the obvious lack of primer on the trailer, the greasing of the wheel bearings was a good call. Thanks for the heads up on this sub par vendor.

[@SweetProjectCars]

Thank you for watching and sharing, we appreciate it. Have a fantastic weekend my friend. mad Mike the hammer SPC

[@Wawalsh1234]

Great tip. I would be worried about those welds holding, they are horrible.

[@SweetProjectCars]

Thanks Bill, it's concerning for sure! Thank you for watching and sharing, hope you have a great day my friend. mad Mike the hammer SPC

[@s.p.t.4680]

Mad Mike does it again. I have learned a lot of different things from you and I feel there is so much more to come. Great video my friend.

[@SweetProjectCars]

Glad to hear it! Thank you so much for watching and for the nice comment, it's our pleasure to share, and it makes it all worth it when we get great subscribers like you SPT! Hope you have a great week my friend. mad Mike the hammer SPC

[@D2O2]

Thanks for the tip Mike! Shame on Rocky's for their poor paint quality.

[@SweetProjectCars]

Our pleasure D! Thanks for watching, we really appreciate it my friend. Have a fantastic day. mad Mike the hammer SPC

[@ShowYouOnceAgain]

"every" single time I watch your videos I find a use for the information"somewhere" else in my home. Using this on my wrought iron deck rail which is showing the start of rust! Keep up the good work! Thank YOU for sharing the info!

[@SweetProjectCars]

Excellent!! Thanks so much for watching and sharing Jenny, it's our pleasure to help. Hope you have a fantastic day my friend. mad Mike the hammer SPC

[@wantblackwolf]

Looks like they just put one coat of cheap paint over the rust. Not a good company if this is their quality. They should of sandblasted the metal or anything to get rid of the rust before painting.

[@diycarhome9151]

Most trailer makes do this. Will weld trailer with hot rolled steel and tubing with black dirt/scale on it and wipe it down with degreaser and spray it black. A way to put less labour in it, less cost to the customer and get it off there lot. Meanwhile a year later the thing is rusting. I know I'm going to making to trailers a 5 x 12 or 14 and 4 x 8. I will finish every thing on the trailer wiring, lights, hold downs, storage box. Then completely strip it down (metal Is already bare) get some muriatic acid and do a 5 to 10 foot section at a time de-rust and take off the steel mill scale off too.Then finish up with a mild Naval Jelly and flush with hot water, dry the metal and Prime with Home Hardware's Metal Primer (3 coats) lightly sand with 320 wet paper and dry and paint white.

[@SweetProjectCars]

We agree!! Thanks for watching and sharing Aaron, we really appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@rotfan77]

That stuff looks pretty good, and not too expensive. Are usually spray like that is by CRC 6-56, but it comes in gallons and about 50 bucks.

[@SweetProjectCars]

It's a great product rotfan77! Thank you for watching and sharing, have a stupendous day my friend. mad Mike the hammer SPC

[@geor664]

Over the last 20 years I've used the same Loctite Extend Rust version but in the 1 litre white plastic bottle. It seems to be a brush paintable PVA style liquid. I can couch for it as well. Works extremely well to stop rust. In Australia there are a few places i have bought it from. Aims Industrial and CBC bearings.

[@SweetProjectCars]

Thanks for watching and sharing Geo R! It does work! Have a great day my friend. mad Mike the hammer SPC

[@ashleydubbeld9236]

I paint (r v ) frame I can tell You for certain that their Most likely no primer!!L! The more you are able to get the frame painted faster the more you paid for production ( bonus money) I grew up around body & paint shop my dad was auto body and painter so when to in the factory painting frames I disregard all my dad had taught me 🙄 I remember one time I worked in the department that built and painted dumpsters I remember painting dumpsters not even fully dried being put on the tractor trailer wet in the rain I just couldn’t believe it I told my dad need to rolled his eyes at me And this was the time we have been painting with waterborne paint so I never heard anything about them but I can just imagine what they look like when I reach the customer !!! This was in southwest Michigan and Indiana Michigan border so we were one of the main supplier of travel trailer frames and dumpsters so I made good money but sometimes I wonder how long that stuff lasted🤔🤔🤔🤔🤔I hope this gives you a little insight in how things are done in an RV industry I had a almost 12 years of it so I was around him enough to know about stuff by the way great video again and great tips thank you so much for all the hard work you put into your videos

[@ohboy2592]

Sounds like you worked around middlebury, Elkhart or nappannee. I have friends that work in the rv industry and I believe what you are saying. They all say the same and not a single one of them own an rv they produce🤣🤣🤣

[@SweetProjectCars]

Interesting. Thank you so much for watching and sharing Ashley, we truly appreciate it my friend. We all know that quality is not some companies #1 goal :( Hope you have a great evening my friend. mad Mike the hammer SPC

[@wealthyblackman2655]

Old oil from oil changes works great!

[@SweetProjectCars]

Thank you for watching and sharing, have a great day. mad Mike the hammer SPC

[@johnsn10]

I love your sweeeeeeet videos. Keep them coming!

[@SweetProjectCars]

Thank you so much for watching and sharing johnsn10! Have a fantastic day my friend. mad Mike the hammer SPC

[@TheAdventuresofWally]

Looks like a good product. But I live in northern Newhampshire. Everything rusts fast up.here. that stuff will do no good here. We sand blast rust away and use oil based paints. They seem to hold up better here in the white mountains. Good video. 👍

[@SweetProjectCars]

Thanks for watching and sharing, we appreciate it. Hope you have a great weekend. mad Mike the hammer SPC

[@froggerman44]

What is this locktight? Never seen it

[@mudachuka12345]

It’s in the written description there is a link under the video I nearly missed it as well. Loctite extend rust neutraliser

[@JNI_GAMER]

Its Loctite spray adhesive! but I really don't know how this thing works and not risking doing in on my trailer !!!

[@renymullen4582]

an adhesive that helps lock screws & nuts tight so they do not easily get loose. Mechanics use this a lot....

[@SweetProjectCars]

It's this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Jim. mad Mike the hammer SPC

[@JD-wm4uv]

You would think the company that made the trailer would have put some kind of rust protection . Trailers are not cheap .

[@SweetProjectCars]

For sure! Thanks for the view J! Hope you have a fantastic day my friend. mad Mike the hammer SPC

[@Turco949]

I like the voice commentary from Who Leo. Btw, despite the crappy paint job, that is a sweet trailer!

[@SweetProjectCars]

LOL, Hoolio is a busy guy and doesn't have a lot of time to chit chat on the videos :) Thanks for watching, we appreciate it my friend. Have a great weekend. mad Mike the hammer SPC

[@shawn78789]

Friend has small rust spots on her roof of her Pearl white 2010 Mazda 3. I was thinking of using the Loctite; in the video you stated I wouldn’t but you can use. I was going to use and if needed get some pearl white touch up paint if needed. What say you my friend?

[@SweetProjectCars]

Hello Shawn, from what you are describing it sounds like you have clear coat rust which is caused by brake dust embedding into your clear coat. If that's what it is, watch this video kzbin.info/www/bejne/j57dlo2JabaCask and use the products shown then use this goo.gl/z9TrgR to coat the surface and the rust will be gone and not come back. If the rust specks that you are talking about are larger than a ball point pen tip, then you'll have to buff out the area with the mix in the attached video and use touch up paint, but by doing the first process you will know in just a few minutes if it's just clear coat rust, pray that it is. Thanks for watching and asking, have a great day. mad Mike the hammer SPC

[@Luxxen101]

You. Are. Awesome!

[@SweetProjectCars]

Thank you very much, we appreciate the view and comment. Hope you have a stupendous day my friend. mad Mike the hammer SPC

[@1D10CRACY]

Going to have to try this! Everything I own seems to rust out! :D Thanks for the video!

[@SweetProjectCars]

You can do it! Thank you so much for watching and sharing, we really appreciate it my friend. Have a great week. mad Mike the hammer SPC

[@YT-cz1ju]

Hey great channel & video - We have rust areas forming on top of our RAV4 Windshield. How can we stop the rust which is on the roof, between the top of the windshield (gasket). Also is there any way of removing/destroying it without a full body spray job?

[@SweetProjectCars]

Check out our video here kzbin.info/www/bejne/Y3myo5WHoqaWgas it will get you pointed in the right direction my friend. Thanks for watching, have a great week. mad Mike & team

[@whatthe2458]

Just ordered some. Thanks

[@SweetProjectCars]

Thank You! It's our pleasure to share, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@bigm383]

I don’t know how you restrained yourself from lambasting the trailer company. Great video.

[@SweetProjectCars]

LOL, thanks Big M! We appreciate the view and comment my friend, hope you have a fantastic day. mad Mike the hammer SPC

[@willyck948]

Why haven't I heard about this stuff anywhere else earlier. Wow.🤘

[@SweetProjectCars]

Not sure on the Willy! Thanks for the view and comment, we appreciate it my friend, always a pleasure to hear from you! Hope you have a great weekend. mad Mike the hammer SPC

[@BruceLyeg]

Cool. I just went to Amazon and ordered some. Thanks!

[@SweetProjectCars]

Excellent! Thanks for watching and sharing Bruce, it's always a pleasure my friend. Have a great weekend. mad Mike the hammer SPC

[@motorv8N]

Looks like Rocky should change his company name to Rusty’s Trailers...

[@SweetProjectCars]

LOL, sounds about right motorv8N :) Thanks for watching and for the comment, we appreciate it. Have a great weekend my friend. mad Mike the hammer SPC

[@trishpipkins]

Such a shame that a brand new trailer is already rusting. And in Florida I don't often see rust. Just goes to show what happens when a job isn't done right the first time. Good to know Loctiite can fix that! So simple! Like you say "simple ways." 😁💖💖💖

[@SweetProjectCars]

Simple ways :) Thanks for watching and sharing Trish, always a pleasure my friend. Have a fantastic day. mad Mike the hammer SPC

[@richweyerts7267]

I have one. I have some tree sap on my rig. What's the best way to get that off

[@SweetProjectCars]

Do this kzbin.info/www/bejne/pnPLY5umn7p8fdk for sap removal Rich. Thank you for watching and asking. Hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@kylemlm]

Mike , good work..Not big fan of painted trailers.

[@SweetProjectCars]

Thanks for watching Kyle! Appreciate you my friend. Have a stupendous 4th! mad Mike the hammer SPC

[@steveo7624]

Always great advice thank you

[@SweetProjectCars]

Thank you very much Stephen, we truly appreciate the view and comment my friend. Have a great evening. mad Mike the hammer SPC

[@kevinbigelow8931]

On one of your other videos about desufating a deep cycle battery, I wanted to know if you still needed to charge the battery after that process?

[@SweetProjectCars]

Yes, after doing the process use this amzn.to/3kmCThX to bring it to full charge. Thanks for watching and asking Kevin. Have a great weekend. mad Mike the hammer SPC

[@adnacraigo6590]

I love your videos. Thanks a bunch.

[@SweetProjectCars]

Glad you like them Adna! Thanks for watching and sharing, we really appreciate it, hope you have a great weekend. mad Mike the hammer SPC

[@Mcdamn1026]

Could do this to the outside of a dump truck bed??? That frequently rusts so quick

[@SweetProjectCars]

Absolutely Ronald! Thanks for watching and sharing, have a great day my friend. mad Mike the hammer SPC

[@ge2719]

Another example of doing a half assed job at first costs way more time in the end, and usually it costs someone else.

[@SweetProjectCars]

We are with you on that GE! Thanks for watching and commenting, we really appreciate it. Have a great weekend my friend. mad Mike the hammer SPC

[@mjhammer8121]

There is never enough time to do it right the first time, but always enough time to go back and do it again.

[@rcragemoddingenjoyingrcveh417]

So what kind of Loctite what type

[@SweetProjectCars]

We use this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching. mad Mike the hammer SPC

[@MichaelR58]

Great tip , thanks for sharing , God bless !

[@SweetProjectCars]

Glad it was helpful! Thanks for watching Michael, we really appreciate it. Have a great evening my friend, God bless. mad Mike the hammer SPC

[@PeteyMcSavage]

Yep rust is a killer I use cosmoline based spray it what military uses best is rp-342 or Crc but Brock supply sells 12 pack of spray can at a great price point I take a look at the locktite

[@SweetProjectCars]

Thanks for watching and sharing Matt, we really appreciate it, hope you have a great day my friend. mad Mike the hammer SPC

[@alexguzman5547]

Wow. At first I thought it was a second hand trailer and the former owners cleaned it up and slapped a little paint on to cover the problems. Then I saw the stickers and Mike said that it was brand new. Horrible job. Hope anyone else who bought from them sees this video before they've lost out on their investments.

[@SweetProjectCars]

For sure Alex! Thanks for watching and sharing, have a fantastic day my friend. mad Mike the hammer SPC

[@papatorr3669]

So, what Locktite product did you use?

[@willd1665]

Check the show more section of video he lists a link to buy it

[@SweetProjectCars]

We use this amzn.to/3qrZ7Ax Thanks for watching and asking Papa, have a great day. mad Mike the hammer SPC

[@papatorr3669]

@@SweetProjectCars I share the channel with others, top notch instructional videos, subscribed and get notifications!

[@kimellis4659]

I love your videos I always learn so much !!

[@SweetProjectCars]

Glad you like them Kim! Thank you so much for watching and sharing, we truly appreciate it. Hope you have a great week my friend. mad Mike the hammer SPC

[@TheShop.]

I watched this video twice and still didn't get the name of the Loctight stuff he was using. REALLY? Loctight what??? I finally looked in info below the video and found it. If you're going to have an informational video, provide the information.

[@SweetProjectCars]

You found it didn't you?? So we DID provide the information :) Thanks for watching and sharing, hope you have a fantastic day and receive everything you truly deserve in life my friend. mad Mike the hammer SPC

[@debbie2027]

YOU ROCK ! LOVE this channel and tell others about your guys ... U da BEST !

[@SweetProjectCars]

Thanks so much Debbie! We truly appreciate the view and comment, hope you have a stupendous weekend my friend. mad Mike the hammer SPC

[@benharrison1069]

Good video and useful lesson too, Mike. I hope you got a huge discount on that trailer after you showed them all the rust spots.

[@SweetProjectCars]

Thanks Ben! We worked a deal with them :) Appreciate the view my friend, always great to hear from you. Hope you have a fantastic weekend. mad Mike the hammer SPC

[@blackf350]

Used diesel oil is the best for that wood deck.

[@SweetProjectCars]

Thanks for watching and sharing, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC

[@britjamaine9229]

It’s a shame it was built well but the painters are lazy AF. Thanks for all you do to help strangers.

[@SweetProjectCars]

Our pleasure Brit! Thank you so much for watching, we truly appreciate it. Hope you have a great day my friend. mad Mike the hammer SPC

[@TheCamaro5]

I think Diamond C trailers are the only ones that prime the metal, and then they powder coat not paint there trailers.

[@SweetProjectCars]

Thanks for watching and sharing, have a great day my friend. mad Mike the hammer SPC

[@Nico_335i_DCT]

Very nice stuff Mike. Thanks for sharing! Have a great week, regards Nico.

[@SweetProjectCars]

Thanks Nico! I'm a little behind on my responses, have had kids and grand kids visiting for the past month, the last of them are leaving on Monday :) It's always a pleasure my friend, hope you have a great weekend. mad Mike the hammer SPC

[@19211265]

You guys are the best. Please keep up the great work. Thank you 🙏🏻 👏🏻👏🏻👏🏻

[@SweetProjectCars]

Thank you! Will do! We really appreciate the view and comment my friend, makes all we do worth it. Hope you have a fantastic day. mad Mike the hammer SPC

[@19211265]

@@SweetProjectCars you’re very welcome sir. And may you always have a fantastic day 👍🏻

[@albertagibinik3436]

Trailers are difficult to find, so I heard. Was this trailer a rush job?

[@SweetProjectCars]

Possibly Albert, I think companies are trying to make up for all the losses sustained last year, plus they are struggling to find help, maybe a 3 year old painted it, who knows :) LOL Thanks for watching, we appreciate it. Have a great week my friend. mad Mike the hammer SPC

[@WastelandChrome]

I didn’t know you guys were in Pensacola! I just fixed my seats with your help. I’ll have to drive by so you can see the results! 🤣

[@SweetProjectCars]

Thanks for watching and sharing Shajuan TV! Hope you have a great day. mad Mike the hammer SPC

[@ELEVOPR]

I tried this spray on my Mother In-Law, But she is still rusting up 🤔 Another awesome Video SPC keep up the good work 👊

[@SweetProjectCars]

LOL, our pleasure El Evo! Thank you for watching and sharing, and for the laugh this morning :) Hope you have a great week my friend. mad Mike the hammer SPC

[@peterwarner8541]

I’d be taking that back and buying a galvanized trailer instead. Loctite rust converter is great stuff and you can paint over it but just a matter of time until you’re going to have rust under that shoddy paint job.

[@SweetProjectCars]

For sure! Thanks for watching and for your comment my friend, we really appreciate it, have a great day. mad Mike the hammer SPC

[@dcleboski698]

Well, thank you for the video. I’ll know never to buy a trailer from Rocky’s Trailer, Parts and Hitches. It appears they do a ‘slip shot’ paint job on the trailers they sell. They should be super embarrassed for the crappy products the sell. I was needing a trailer for my 2 Harley’s, so at least I know where ‘Not’ to go buy them.

[@SweetProjectCars]

Thank you very much D! We appreciate the view and comment, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@googlesucks4349]

Forget the rust, those welds are totally unacceptable!

[@SweetProjectCars]

Absolutely! Thanks for watching, we really appreciate it. Hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@kennymastersjr3065]

What's in the can loc tight what rust proof spray paint?? You never showed the front of the can!!

[@SweetProjectCars]

It's this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Kenny. mad Mike the hammer SPC

[@ytgre7767]

Usually the next thing I do is get rid of the trailer tires usually you get some crappy Chinese tires that let go at the worst possible moment..

[@SweetProjectCars]

That's on the to do list Ty Gre! Thank you for watching and sharing, we really appreciate it, have a great week. mad Mike the hammer SPC

[@FilterYT]

Thanks for another great video. Check out the price difference on Loctite Extend Rust Neutralizer on amazon USA and amazon Canada

[@Marcoosianism]

Yup 6 bucks vs 30 bucks. Amazon retailers always screw Canadian customers on products like this. Amazon doesn't give a crap either. Same price difference on tons of paints and liquid hardware products. 100 bucks for a gallon of 303 in Canada. Daylight robbery.

[@SweetProjectCars]

Thanks for watching and sharing FilterYT, we really appreciate it. Not sure why there is such a difference in prices? Hope you have a great weekend my friend. mad Mike the hammer SPC

[@MyGuyKirby]

Well rust and Pensacola just go together, sadly it was a new trailer.

[@SweetProjectCars]

Thanks Thom, always a pleasure my friend, have a great day. mad Mike the hammer SPC

[@tonyneises5195]

Great tips!!! Thx. Nice bubble gums welds they laid down. Such a shame the pride in a product has so declined.

[@SweetProjectCars]

Agreed Tony! Thanks for watching and sharing, it's always great to hear from you my friend. Have a fantastic weekend. mad Mike the hammer SPC

[@unnainconnu9098]

Based on reviews, it has to be painted after this spray. A spray paint could do the job.

[@SweetProjectCars]

Watch this kzbin.info/www/bejne/aam8dmSpfNxmidE in its entirety, it will help you out my friend. Have a great day, thanks for watching. mad Mike the hammer SPC

[@MikMech]

4:00 Named and Shamed ! That is disgusting for a new trailer. Warranty??

[@SweetProjectCars]

IKR, very disappointing for sure. Thanks for watching, hope you have a great day my friend. mad Mike the hammer SPC

[@claudesmoot1880]

I would take that trailer back.

[@SweetProjectCars]

Thanks Claude! Yeah, certainly disappointed in it for sure :( Appreciate the view my friend, have a great day. mad Mike the hammer SPC

[@EldonsService1]

Brand New trailer never even used with rust like that, I'd take it back and buy a good trailer

[@SweetProjectCars]

Thanks for watching and sharing Eldon, we appreciate it. Hope you have a great weekend. mad Mike the hammer SPC

[@sams568]

Mad Mike no Sunday video? Happy 4th on the 5th

[@SweetProjectCars]

We'll be back this weekend, had family visiting over the Holiday, Sam :) Thanks so much for watching and being a great subscriber, we really appreciate it. Have a great day my friend. mad Mike the hammer SPC

[@sams568]

@@SweetProjectCars yes sir family always come first.

[@nordicresilience]

I'd be concerned about the overall quality of the trailer after seeing that paint job. If they cut corners and cheat on the paint, where else did they cut corners and cheat? Seems like they did no cleanup, or even primer before coat. And the topcoat didn't even have coverage in lower spots.

[@SweetProjectCars]

We're with you on that! Thanks for watching and sharing, hope you have a great day my friend. mad Mike the hammer SPC

[@LP-ov8mp]

They don’t prime the metal and use poor quality paint. My father in laws brand new trailer similar to yours looked like it was 30 years old after one winter in central NY.

[@SweetProjectCars]

You are correct LP! Thanks for watching and sharing, hope you have a great week my friend. mad Mike the hammer SPC

[@gregmosk]

Thank you Mike. I couldn't remember the product name. 👍👍 Getting older 🤣🤣

[@SweetProjectCars]

LOL, I'm with you on that my friend :) Thanks for watching and sharing, hope you have a great day Greg. mad Mike the hammer SPC

[@robertnaughton5417]

Loctite what? Was that a spray paint or what?

[@SweetProjectCars]

It's this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Robert. mad Mike the hammer SPC

[@JD-wm4uv]

I would be so mad if I bought a new trailer and this happened

[@SweetProjectCars]

Yeah we were not impressed :( Thanks for watching J, hope you have a great weekend. mad Mike the hammer SPC

[@theomnipresent1]

Guess that trailer wasn't really such a good deal after all.

[@SweetProjectCars]

You are correct! Thanks for watching and commenting, hope you have a great day. mad Mike the hammer SPC

[@kirknygaard4669]

Sweeet tip‼️

[@SweetProjectCars]

Thank you very much Kirk! We appreciate the view and share, hope you have a fantastic weekend. mad Mike the hammer SPC

[@leesmith5419]

I would be taking their time about getting my money

[@SweetProjectCars]

Thanks Lee! We appreciate the comment and view, hope you have a great weekend my friend. mad Mike the hammer SPC

[@pidgeiam4979]

In all honesty, and I don’t normally poke out bad stuff....those welds look really bad. Like a mig welder 110v unit bad. Which is bad for any trailer, but a trailer that big man I’m just saying. Looks like a nice trailer, but those welds??!! A lot of lipstick on a pig and they can’t even get that right. I enjoy the channel and like your effort and humour. Keep an eye on the spots/areas you don’t normally see. 😘 -Pidge

[@SweetProjectCars]

Thank you very much Pidge! We really appreciate the view and comment, hope you have a fantastic weekend my friend. mad Mike the hammer SPC

[@randyglasgow5692]

Loctite what?

[@SweetProjectCars]

It's this amzn.to/2ZUPL7b and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Randy. mad Mike the hammer SPC

[@miamiflow5701]

Sweeet project !!!

[@SweetProjectCars]

Glad you like it miami flow! Thank you for watching and sharing, we truly appreciate it. Have a fantastic evening my friend. mad Mike the hammer SPC

[@rogerpenndorf1510]

Why lock tite

[@silvergrizzly316]

Check out the Amazon link in his showmore for the lock tite and everything he uses in his videos. 👍👍

[@SweetProjectCars]

Because we know it works! Thanks for watching, have a great day. mad Mike the hammer SPC

[@The_R-n-I_Guy]

That thing needs stripped to bare metal and property prepped and painted. I don't know where you got that, but I would've gotten a discount or gone somewhere else. They sell crappy work like that because nobody complains. Everyone needs to say something when they see shotty work. I don't make enough money to waste it on a poorly made product

[@SweetProjectCars]

We're with you on that DAL! Thank you for watching and sharing, have a great day. mad Mike the hammer SPC

[@davebuts1921]

That is shocking, that much rust on a new trailer. Where is the skill or pride in workman ship?

[@SweetProjectCars]

That is gone, or so it appears. Lots of shoddy products produced during the year 2020 from what I have seen, and a lack of product. Thanks for watching and sharing, hope you have a great weekend my friend. mad Mike the hammer SPC

[@edwardkane3237]

All I can say is your dealing with piss poor metal preparation before the manufacturer painted the trailer. I’m sure they just blew on some cheap paint with zero primer underneath…?

[@SweetProjectCars]

Looked like a rush job to us as well Edward. Thanks for watching and commenting, have a great day. mad Mike the hammer SPC

[@Leonardokite]

Rocky's Trailers.....shame on you!!!!! Way to nip it in the bud, Bud! Hammer is home Mike!

[@SweetProjectCars]

For sure Leonard! Thanks for watching and sharing, always great to hear from you my friend. Have a stupendous day. mad Mike the hammer SPC

[@texasatrox]

They obviously painted over the rust without any primer. Between that and the quality of those welds, I'd be ashamed to put my name on it. That thing needs to be sandblasted, rewelded, primered and then painted.

[@SweetProjectCars]

Agreed! Thanks for watching and sharing, we appreciate it David. Hope you have a great day my friend. mad Mike the hammer SPC

[@rvadventures]

Stay away from snapper trailers! They sell junk

[@SweetProjectCars]

Thank you for watching and sharing DC, we appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC

[@ToFightTheGoodFight]

ROCKY TRAILER! Shit built!

[@SweetProjectCars]

Thanks for watching Peter, hope you have a great day. mad Mike the hammer SPC

[@stephenpickard5178]

This is a very disappointing example of a brand new product. Unbelievable!

[@SweetProjectCars]

It really was Stephen :( Thank you for watching, we truly appreciate our great subscribers like you. Have a fantastic weekend my friend. mad Mike the hammer SPC

[@Normalhowaboutyou]

Locite?

[@SweetProjectCars]

It's this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Geoff. mad Mike the hammer SPC

[@billy2bob63]

Thanks Mike! I was out today and needed to go by Lowes anyway so I bought a can. 👍

[@SweetProjectCars]

Thank you for watching Kerry, it's always a pleasure my friend. Have a great weekend. mad Mike the hammer SPC

[@ashbashbaby2]

Locktite what?

[@SweetProjectCars]

It's this amzn.to/3qrZ7Ax and just a reminder, all of the products/tools we use in our videos can always be found in the SHOW MORE of the videos description, if you can't find it let us know and we will help you. Thanks for watching Ashley. mad Mike the hammer SPC

[@dangerdavefreestyle]

that trailer looks like it was slapped together finishwise and the appearance of the welds, probly cost 5 grand for that pile of shit

[@SweetProjectCars]

Thanks for watching and sharing Dave, it wasn't quite that costly, but it is a little rough :( Have a great day. mad Mike the hammer SPC

[@swmatthews005]

Sweeeeeet

[@SweetProjectCars]

Thank you very much Simon, we really appreciate the view and comment. Have a great evening my friend. mad Mike the hammer SPC

[@vintage76vipergreenBeetle]

👍

[@SweetProjectCars]

Thank you very much for the view and thumbs up! Hope you have a stupendous weekend my friend. mad Mike the hammer SPC

[@warptek]

And.... respectfully... what is that going to do once rain washes it off???

[@Marcoosianism]

It chemically reacts with rust to convert it to an inert material that can be painted (and needs to be painted), so the product itself doesn't just wash off.

[@SweetProjectCars]

Read the response from Marcoosianism.... He hit it right on the head, fantastic explanation. Thanks for watching. mad Mike the hammer SPC

[@SweetProjectCars]

Thanks for having our back my friend!! Have a fantastic weekend, and thanks too for being here with us my friend. mad Mike the hammer SPC

[@Marcoosianism]

@@SweetProjectCars Thanks Mike, much appreciated! You as well, my friend.

[@dbfcrell8300]

PLEASE MAKE A FOLLOW-UP VIDEO IN A YEAR OR SO AND SHOW US THOSE EXACT SPOTS. PLEASE DO NOT TOUCH IT UP PRIOR TO MAKING THE VIDEO. THIS IS THE ONLY WAY TO PROVE WHAT YOU SAY IS TRUE.

[@SweetProjectCars]

We aren't here to prove anything to anyone, with over 600 videos on our channel we aren't into trickery. Plus we provide all of this DIY information to our viewers FREE of charge. Thanks for watching Dbf. mad Mike the hammer SPC

[@dbfcrell8300]

​@@SweetProjectCars Mad Mike, Let me clarify my statement as I didn't mean it like "you need to prove it to me". I simply meant it as to give your channel the validity it deserves. No need to prove anything to me. (and I'm not back-pedalin' here, honest).

[@ricosuavez582]

👍👍👀

[@SweetProjectCars]

Thank you Rico! We appreciate the view and the 2 thumbs up :) Hope you have a fantastic week my friend. mad Mike the hammer SPC

[@Juanelloooo]

Don't buy PJ TRAILERS..i bought one, and i regret..

[@SweetProjectCars]

Thank you for watching and sharing Juan, we appreciate it my friend. Have a great day. mad Mike the hammer SPC

[@Eschelonistic]

The paint job is one thing, the weld quality = it came from China.... splatter everywhere. Would have sent it back and made them make it themselves

[@SweetProjectCars]

Yeah, very disappointing for sure! Thanks for watching and commenting, have a great day my friend. mad Mike the hammer SPC

[@stevepimentel1225]

Buy junk and you get junk

[@SweetProjectCars]

True! Thanks for watching Steve, we appreciate it. Have a great weekend. mad Mike the hammer SPC

[@karlkascha1261]

Unless you stole it, I would take it back. Garbage quality.

[@SweetProjectCars]

Thanks for watching and sharing Karl, not sure what we are going to do yet. Hope you have a great day my friend. mad Mike the hammer SPC

[@jsh3234]

You need to go back to the manufacturer and complain big time!!!

[@SweetProjectCars]

Oh, we did JonH! Thank you for watching, have a great day. mad Mike the hammer SPC