How to Limit Throttle on FS-i6X - Reduce Throttle Output with Throttle Curve - Flysky i6X i6

[@KingBeetle1966]

Thank you for continuing to create content centered around the FlySky i6/i6X. It's such a great radio for beginners, and I feel like too many content creators poo-poo the humble i6. I for one appreciate the FlySky love! It's pretty hard to beat for the price!

[@bradwhite3587]

Awesome! I was using the right side for a remote lawn mower that I have built and needed to adjust the output! Thank you for us simple guys!

[@thebunkreport]

This is just what I needed. I've burned out two motors by running full throttle for too long. I've set my max power at 70% so I can't go full throttle even if I wanted to!

[@unadjusted1]

Super video's Adam, thank you. Really helps those of us who need a helping hand.

[@beefybeef1326]

Excellent tutorial Adam. Thank you. I wish this channel existed 7 yrs ago!

[@RCwithAdam1]

Lol me too!😉

[@francisscanlon3510]

Thanks, nice job as usual. You are the go to guy on the Flysky FS I6X. Keep up the good work!

[@RCwithAdam1]

Wow thanks! I really appreciate that!

[@jacobheileson9750]

For the second part of the video, my transmitter was having the same problem, but it wasn't AS extreme as yours. Mine was at 77%. It's still a lot though. Glad you showed how to change the end points though! Thank you!

[@fadybenmoussa2114]

mine does'nt even work it's always stuck on 50%

[@geofkane2365]

Very clear and helpful advice and nicely demonstrated.

[@RCwithAdam1]

Glad it was helpful!

[@kenmccallum233]

Hey Adam Why are the end points on all channels set at 100% and 100% by default? Wouldn't 0% and 100% be more sensible? Cheers Ken

[@albaniansuperiorshqipetari8055]

Happy New Year to Everyone, Thanks gor this Helpful Video Adam, Well Done Mate.

[@samuelchristopher4506]

You need to calibrate your esc ( turn on with the throttle up...and bring down so you don't need to mess with the throttle endpoint for your throttle to start sooner You might affect movement values to be non linear and accurate by adjusting with endpoints First part of the video was very helpful .thanks

[@CaptainJohn]

I was trying to do this with my DX6e and found this, it actually is a lot alike although the issues was I put it on a switch in accident lol. But now I know, thanks!

[@devpatel-vu4hs]

budget guy. appreciate this man

[@RCwithAdam1]

Yeah! 👍

[@josephbove7477]

Fantastic video! Very helpful. May be useful for indoor flying. Did you notice longer flight times? Thanks again for doing such an amazing job for the Flysky enthusiasts out there! Happy Holidays!

[@RCwithAdam1]

Thanks so much! Good idea about indoor flying! I haven't really gotten to test it out.

[@loosein1]

Great vids on the Fs-i6x BTW.....learn so much from you

[@longjammeriii3323]

Thanks for the straightforward advice and easy to understand, regards Alan, UK

[@RCwithAdam1]

You are so welcome!

[@svenhindriks7884]

I learned again .thank you Adam

[@RCwithAdam1]

Glad to hear it! 👍👍

[@glytch5]

wow dude thank you so much. What I can't quite figure out is what all this other stuff means on the remote lol

[@RCwithAdam1]

Glad I could help!

[@andreashadjiantonis2596]

Regarding the second part: If you decrease the lower endpoint, will you essentially have current running through the motor when the stick is at it's lowest position, but without the motor actually spinning? If that's the case it could be a short cirquit.

[@literailly]

Similarly wondering about this

[@robertbrander2074]

Good Lesson ! It will be handy for all my Builds and Models ! Thanks !

[@premraj9795]

Thank you so much, it's has been so helpful. Actually I was facing that the throttle issue now get resolved.

[@calycoopermorapedi2332]

Thanks a lot

[@theeddytor3490]

i usually use a glider type plane which fly higher in cloud and once it reaches there i have set a switch designated which change the trottle curve from 90% to 50% (i never set my high to 100% EVER) for 90, 90/4 is 22.5 so my 4 values are 22, 45, 67 and 90. for 50, 50/4 is 12.5 so my 4 values are 12, 25, 37 and 50.

[@sidewayslike3957]

Great it worked!

[@RCwithAdam1]

Glad it helped!

[@TheBambie86]

Great stuff real well demonstrated

[@jluke168]

I cut my thumb trying to remove a propeller earlier lmao.

[@mikewofford2198]

Great info do you know how to do the throttle hold help

[@RamvoBhai-pe4jr]

Good work

[@Tommy5Fingers]

Adam, I have a FS-I6X. I am using a nitro engine. Pertaining to endpoints in the tx, is there a feature that will allow me to setup a kill switching feature beyond any given set endpoint that is in the I6X?

[@budmartin8297]

Maybe do an ESC calibration first then the last step might not be needed?

[@hjorleifuringason2778]

Hi, great videos. Gave you been using Flysky for things like tanks, dozers or excavators? Some videos about that would be appreciated

[@yashnivalkar1131]

Can we change output value of other channels for servo?

[@shoodheshoodhe7903]

Mr what is the advantage of this video i can use this method my rc plane

[@gihanhanwella3307]

Thank you for this..

[@robertbrander2074]

Have you done a Tutorial on how to use the i6 with a Flight Simulator ?

[@RCwithAdam1]

I haven't yet, but should!

[@robertbrander2074]

RCwithAdam Great ! .... Have you seen that little $10 dollar device from Banggood : the iRangeX iRX6 Multiprotocol TX Module for Flysky FS-i6 i6x Transmitter , that lets you bind with many toy drones like Syma and Hubson ? Seems like a good add on for Flysky users . Cheers !

[@stefedwards2934]

Thanks Adam👍🇬🇧

[@RCwithAdam1]

👍

[@jonjepson3650]

Another awesome tutorial 👍

[@RCwithAdam1]

Thank you!!

[@gaba2130]

Plz i need help the horizontal line on his display tha was moving when he accalerated is always in the middle of my display and it causes trouble

[@robbietrumpet]

Hi, I love my FS-i6X I have a problem with flying with Nitro power... MY problem is the main Throttle trim on the front of the transmitter For some reason will not move a SERVO ( try it yourself) I think it has something to do with speed controllers verses a SERVO hooked into channel 3 .... All the other trims will move servos just fine but NOT channel 3 there is no info in the user guide... and I have a different FLYSKY transmitter too (FS-ST8) which the same problem exists... Any ideas for me... Robbie

[@EJ3.16]

👍🏻👍🏻excellent excellent tutorial thank you....!!!

[@andreiantohe7442]

Hi! I have the same radiocontrol flysky and I used it for a boat control. Do you have any ideea how to set up the throttle for forward and backward controls?

[@markocarevic9488]

Hello, Hello Adam. Can you explain how did you connect RC receiver with motor. Is it a direct connection or did you use some sort of driver? Thank you

[@RCwithAdam1]

Hi, Marko. The ESC is used to control the power to the motor, as well as power the receiver. The ESC connects to the battery and has a BEC to power the receiver. Check out this video kzbin.info/www/bejne/bl7PopSEd9GUetU for a fuller explanation.

[@denismoran670]

Hi ,Adam - thanks for the video. Unfortunately , you didn't address the issue of motor running when the throttle is switched on. I've just bought a twin edf, and cannot get the motors to stop, even taking them down to 120% - they slow, but don't actully stop? I've done the 'stick up'/ connect battery, drop the throttle arm, but to no avail, except that the motors sound in synch! Any suggestions, please?

[@mh_intelligent4576]

Great thanks

[@josefranco8973]

Hi Adams great video , my fs-i6 does not respond when I do what you show in the video about trimming the throttle. What is going on?

[@silverrick90]

I have a question. I’m using the fly sky FS-i6X for my Tamiya grand hauler. When I’m reversing I have very little throttle. I get full throttle going forward but reverse is limited. My end points are all set to 100%. Thanks!

[@abipaily228]

Can I use 2200kv motor with 10 inch props ? I read that I need to use 1000 kv motors or they will burn out. So reducing throttle output can that allow me to use 2200 kv motors without burning out ?

[@WATCHMEGOBROKE]

Is this necessary to do?

[@sinzichang9345]

Hi what if I want to increase my throttle value instead? But however my High is already at 100%...

[@knagencjusz1958]

What is idle mode?

[@DeMoNSe3d]

Thanx for this!

[@curiouslife6014]

i got that

[@loosein1]

thanks for the reply

[@brendand.2269]

Is there a way for beta flight to limit throttle or blhei32

[@CarlosGutierrez-ou2bb]

Hi Adam, Just a quick question for you about Fly Sky 6. Can one transmitter be used for two models?? Do you need separate receivers and do they have to be the same frequency, or does that matter? Can I get a second receiver that will match up to the transmitter? Any help greatly appreciated. Thanks

[@ashishpawar2261]

Hi, Sir I have a problem with flysky fsi6 transmitter when the throttle is moved to 75% the motor shut off and starts to beeps and after making throttle 0% it starts again and the same repeat, please help me out.

[@hyphyfpv1331]

Hello @5:23 is that the reason why my drone disarms when have throttle down for freestyle?

[@LONEWOLFAirsoft]

Hi there. Thanks for all the tips. Beside the throttle output is it possible to lower the output for other channels like 1,2 or 5,6? Thanks Tim

[@humbertomonteiro6742]

It is, on TX ATV function...

[@debrajrooj3414]

My home made dorne DJI Naza V2 not arming Please help 🙏

[@user-de7wo5xb6v]

How to can go return

[@christophertaylor7647]

can i do this on ch2?

[@user-hq2zo4xg7b]

Good

[@loosein1]

Hey there, I need a little help. Does anyone know what brand of Gyro/stabilizer that will work with Flysky fs-i6x transmitter ? (RC Plane) thanks in advanceBTW, great videos

[@ParaglidingManiac]

What if my throttle's in the middle position for neutral, but I want it traditionally lowered all the way down for neutral? I have reverse there now.

[@DimitrisStrigkos]

My friend I have the same problem and I cannot find answer. Have you found how the neutral can be to the lowest position of the stick?

[@loosein1]

Hmmmm, next project for Adam......find a gyro that works with flysky transmitter!

[@RCwithAdam1]

I think so!

[@loosein1]

Adam , I believe the NX3 and NX3 EVO may do the Job......but ur the expert buddy

[@kathanchauhan8350]

there is so much delay in my throttle response that i crashed my machine twice because of uneven throttle it just shoots up suddenly and then gets to zero in the same manner the motor output is not at all balanced what should i do to avoid a third crash?

[@RCwithAdam1]

Hi! Are you flying a plane or quad?

[@kathanchauhan8350]

@@RCwithAdam1 a quad

[@loosein1]

No ideas? Gyro/stabilizer that will work with Flysky fs-i6x transmitter ??

[@RCwithAdam1]

Hi! I think this www.banggood.com/custlink/DvmDbYCYyv might be what you're looking for--FS-BS6. Edit: Sorry, I just realized that is designed for a car. Hmmm, wonder if it would work at all for a plane?

[@cikwanfpv4646]

Hai Adam, if i alter throttle end point in radio, so will i also have to alter in betaflight receiver tab too ?, . , . . . ,., .

[@RCwithAdam1]

Hi! I'm not sure. I'll have to test it out.

[@glowworm3345]

Is there a way to set the throttle so that below mid throttle the motor will run in reverse? I’m trying to use this transmitter for an rc crawler so I’ve got to have a reverse on the throttle.

[@RCwithAdam1]

I don't think so, at least not in a normal way. But I will look into it!

[@johnhanton1649]

Use a reversing motor controller, common for model boats.

[@ArunKumar-yu3qp]

Throtal 70%k bad Kam kar raha h kya karu plz

[@user-lm9po5ws7x]

❤❤❤

[@anshulsolanki7563]

My receiver get disconnect after 50% of throttle can you help me to find out the problem ??

[@RCwithAdam1]

Hi! what electronics are you using? It could be a "brown out" where the motor and other electronics draw too much current away from the receiver.

[@andrewerickson6690]

Hey Adam I'm having similar issue with an i6x a flite test 25 amp esc the nano goblin 4000 kv motor on 3 s worked perfectly with the radio link t8s but I lost the rx in an unfortunate electronics ejection stuck the flysky rx in brand new 3 of them to be exact and all of them go wompus at full throttle

[@premraj9795]

But still facing a lot of issue rest of it.