How to lower/slam a d21 hardbody for $60

[@uncleiroh6127]

Coming from a person who knows absolutely nothing about these trucks you made it seem very easy to do this. I’m gonna get my friend to help me. Wish me luck

[@johnnymills1594]

96 hardbody was my first truck. I bought in 97. Yes I'm old lol, 40. I used blocks and pulled the middle spring. Cranked torsion bars , got alinement. Nice ride

[@STONEBROKEGARAGE]

that's sweet man !

[@adrianmitchell7878]

That not old

[@johnnymills1594]

@@adrianmitchell7878 well thank you ma'am for that. I'm 40

[@jeffreymessner4571]

Bump Stops are gone.

[@jeffreymessner4571]

I guess ill have to C notch it thats how I had my Isuzu.

[@E36tyler]

Good video! I have a quick tip for anyone that wants to do this. Use PB Blaster instead of WD-40 it works way faster in dissolving rust and build up.

[@AgSherr]

It's the stuff! Overnight is a sure bet!

[@dapperdanbuilds]

Jack stands will save your life...

[@JohnShaw26.2]

Danny B my thoughts exactly

[@camgb8025]

came looking for this comment

[@kriscarter5440]

Everytime you said "diff" I drank. I'm drunk. Good times. Cool video.

[@STONEBROKEGARAGE]

Hell yeahh

[@Mon3ymotivat3d]

Where can I find the video of you lowering the front more?

[@kger4643]

Can you post a link to the blocks you used?

[@RYDENROAM72]

I noticed that you forgot to state that lowering will also give you a really bouncy ride on the front end. I have done it before and it got a really bouncy ride. if you want to have a smoother ride and still want that low end you could also spend a little more and get drop spindles. then use the torsion bar to lower even more.

[@STONEBROKEGARAGE]

Yeah but that goes without saying the only reason I haven't gone with spi does is because the font give you any camber which is what I need

[@RYDENROAM72]

STONE BROKE GARAGE ohhh ok. Gotcha you. Still like the video.

[@AgSherr]

You can flip and swap your control arms too for more low! Look into it! You love your Hardbody's Sir! Those Steelies are coming in clutch as well! Keep it up! #SquadetteOutForNow

[@brycenaquin2492]

A 97 was the first vehicle I’ve ever had and I thought my dad sold it but he said it’s sitting on his other property waiting for me to come get it I’m so excited to take the trip and go get my baby back

[@STONEBROKEGARAGE]

That’s cool !

[@benignamartinez4746]

Just wanted to say thanks for your video I just slammed my 1993 hardbody it looks great. Keep it up 👍

[@STONEBROKEGARAGE]

Haha that’s right ! & no worries man

[@brandongarcia2688]

Where’s the video of u re indexing the torsion bar?

[@officialsamuel23]

Can you post a link to where I can purchase this flip kit

[@IceRhino44]

Never give up on the KZbin dream my dude. Doing great!

[@STONEBROKEGARAGE]

thanks man I appreciate all the love & support !

[@nulldua8547]

which way does the slant on the block face??

[@chatomelenaify]

thank you for the video ''you brought back memories of my first new truck I ever bought a 86& 1/2 Nissan hardbody, I paid $6,995 back in 1986. I slammed the same way and installed some enkies saw blades, 15 inch reversables by 8 195/50 by 15 tires and .they would stick out about 2/3 inches from the fender...my wife wants me to buy onother black hardbody and drop it the same way .but I have been looking for some Enki rims 15+8 reversables .if you know were I can get that tip off rims please let me know thank you very much...

[@STONEBROKEGARAGE]

That's rad man ! I'm not to sure where you'd be able to buy some oldschool enkeis but maybe offerup?

[@summerfox9292]

Good video man, very helpful. Nobody out there mention the direction the blocks should go in Thanks

[@EagerOutdoors-oo7pz]

What direction does it go in?

[@rauljuarez2298]

Heyy when you did all this did you truck start making funny noise??? Cause my struck sounds like i have rocks flinging up and a noise that sounds like metal against metal spinning against eachother thanks!!!

[@STONEBROKEGARAGE]

No weird noises for me. Are you sure everything is tight ?

[@rauljuarez2298]

Yes. Which way are the blocks supposed to face? I the lower side of the block to the front. Is that wrong?

[@james-nh1wd]

I had a 94 hard body and I reposition the leaf springs hanger and cut off access and gain another inch and a half

[@moddifiedmachines3662]

I just lowered mine 4inch tapered blocks but my passenger wheel is not inthe center of the wheel well is this normal

[@STONEBROKEGARAGE]

I dont think so unless its redrilled

[@moddifiedmachines3662]

@@STONEBROKEGARAGE so i have to redrill the hangers for it to be center

[@DaisyHead666]

is it possible to do this to a 4x4 truck? the whole lil.. like u bolts are upside down..

[@STONEBROKEGARAGE]

I’m sure it’s doable the only thing is you won’t be able to go as low as a 2wd without having driveline issue’s with binding. However it is definitely doable, I would say maybe put the axle over the leaf springs like on a 2wd truck

[@DaisyHead666]

@@STONEBROKEGARAGE I could try doing that, all it would take would be flipping the axles upside down.

[@DaisyHead666]

@@STONEBROKEGARAGE also i just realized i commented on this video abt the same thing a year ago.. im sorry for the inconvenience xD

[@jenbill]

Should mention once you lower front need to have alignment done anytime you change something specially in front suspension alignment will be off causing drifting and uneven wear, lowered my truck 4” then went with bigger tire so raised it to 3” I have 86.5 Nissan Hardbody bought brand new Feb of 86 and still driving it today

[@STONEBROKEGARAGE]

Yes I forgot to mention. That is awsome to hear !

[@michaelhernandez7192]

i have a 1985 king cab and the driver side tire rubs on the fender when i make a turn , i want it stock , but dont know if some one meesed with the suspention , any recomendations

[@STONEBROKEGARAGE]

Control arm could be bent or bushings could be bad causing the wheel to make back. It’s hard to know exactly what it is without looking at it

[@cruzcervantes1848]

Just got a 97' Extended Cab, can't wait to start working on it. Now I know what to do when lowering it, thanx for uploading.

[@STONEBROKEGARAGE]

No problem ! That's dope man, glad to hear !

[@minorclips7541]

please don't lower your truck like this if you ask around you will find the correct way to lower your truck it may be more expensive but at least you won't destroy your truck. this kid is showing a cheap way to lower your truck but it will really mess up your drive train and suspension please do some research.

[@Brooklyn_Powers]

James Minor You criticize his method of lowering his truck, but, fail to educate us on the correct method of lowering...So! In your opinion: Where did this “kid” go astray...?

[@ed_savant]

in the front, what if i dont want bad camber, cause it just going to eat up my tires._. I really want to lower it, but i dont want camber then have to get it aligned.

[@ed_savant]

great video btw

[@austoncarroll4752]

Drop spindles. They lower the front 2 inches and keep the stock geometry then you loosen the torsion bars sone till its at the height you want. But regardless you will need an alignment

[@STONEBROKEGARAGE]

add shims on your upper control arms

[@robertfurlow4230]

You can use 4x4 top control arms to get rid of camber .. they are longer than 2wd control arms. I cut the bump stops in half and cranked the torsion bars down. = perfect camber

[@3fiddyz808]

Usually any suspension modification will cause you to need an alignment

[@freddygarcia2761]

Hey man I got one truck like yours but single cab and I was wondering where did you get those blocks or what's the name of it so I can order to low my truck

[@STONEBROKEGARAGE]

www.autoanything.com/suspension-systems/61A6131A0A0.aspx I went with 4" blocks

[@MrTecolote310]

Auto parts store bro they always have them

[@jimmyreynolds4619]

What’s the difference between tapered and non tapered blocks? All I want is to lower the back about 2”

[@STONEBROKEGARAGE]

you don't really need a taper for 2" but it's all pretty much to help out with your pinion angle

[@504eldiablo]

What size are the wheels and tires

[@motorman111jld]

Did he say it was good on gas? I have a 97 with a 5-speed and I do good to get 14-15 miles per gallon driving it like it’s a baby. And if I drive it normally that drops to about 11-12. One time I got close to 20 but never again since. I’m thinking my numbers was off that time. I honestly have had 3 full size trucks get mileage over 20 mpg consistently. One 2000 Z71 5.3 4x4 automatic I could get 21-22 mpg. (That was the only one that year I had that did) Two an 87 K5 blazer 4x4 automatic I got 21 mpg. And three a 1991 dodge 3500 Cummins automatic 2x4 would easily get 25+ mpg consistently. The little hardbody is fun to drive but it certainly would not be my choice based on fuel economy or space and comfort. I got it cheap though.

[@STONEBROKEGARAGE]

Maybe there is something wrong with maybe the fuel filter or dirty air filter? When mine was all stock I got about +25mpg driving it like a grandma

[@motorman111jld]

STONE BROKE GARAGE I thought that too but I’ve changed air filter, fuel filter, slightly adjusted timing in every way I could and drove it to see if there was a difference. I’ve even gone as far as changing exhaust to a more free flowing exhaust. The only thing left I can think of is maybe the timing chain has too much wear on it. I just find that hard with just a little over 100k and you don’t hear it rattling.

[@STONEBROKEGARAGE]

I hear you

[@dylanwestenskow6897]

My 89 jimmy (gmc version of blazer) 4x4 with a 350 and auto trans was lucky to get 12 mpg

[@jakobbell5170]

Do you remember what offset the wheels where ?

[@MrSmokeingood]

I just bought a d21 and I bought lowering blocks but the prob my axel and leaf spring set up is completely different it looks like its flipped upside down ? Like my leafs rest and Mount on top of the axel and also my torsion bars are in a complete different location and looks different I’m so confused lol

[@STONEBROKEGARAGE]

Do you have a 4x4 by any chance ?

[@MrSmokeingood]

STONE BROKE GARAGE yes I was just reading in the forums that the 4x4 the perch was on top of the axel and not the bottom, you think I can Still make the blocks work? I’d seriously have to cut the bump stop

[@MrSmokeingood]

Actually I think ima just keep it the stock size I go off roading a lot so no point in slamming it down , ima just upgrade my suspension. I’ve been doing so much work to this truck since I got it a few weeks ago in Oakland lol you’re from seaside right? I’m in Gilroy not too far away we should meet up sometime in Monterey I wanna see how you boosted your tuck, I wanna do a similar set up

[@STONEBROKEGARAGE]

Ontario & sadly it’s not boosted anymore

[@mikethaxton1799]

I dropped my rear end 5" using a 2" lowering block n a 3" lowering block n then I took off the torsion bars n my trucks frame was 2" off the ground

[@STONEBROKEGARAGE]

Goddamn that’s pretty low bud !

[@InherentTrash]

Did you use angled blocks?

[@mikethaxton1799]

@@InherentTrash they were the blocks that this guy used with the slight angle on them n I just used good ol hand power tools (no power tools was used) n my truck sat flat with 15" wheels idk what size tire but it was a low profile tire probably 2 1/2" sidewall maybe n you can fit a fingertip between the tire n fender all around n the tires were about 9" wide n I had no tire rub

[@mikethaxton1799]

@@STONEBROKEGARAGE the funny thing is when I used to go cruzin ppl thought I had hydro's because I used to step on the gas n slam the brakes really fast n did it just a couple times back to back so that the front would lift n drop fast so ppl used to ask me how many switches I had n I told them none it was fun back then. I had a stock 2.4 zte or zle whatever but it was the high output engine n I had 8 spark plugs on the 4cyl I used botch platinum plus 4 plugs with a cut off exhaust ater the catalytic converter n the truck purred I race someone in a chevy blazer n he had automatic v6 on 33" tires n a cold air intake n we raced a quarter mile n I had him at take off then he was about to pass me then I hit 2nd then 3rd I get to 75mph n were already done n then he finally passed me n he must've been pretty pissed cuz I didn't see him the rest of the night

[@cperez8203]

If i was to turn the leafs up-side down, and get adjustable shocks on the front side? Would tht work?

[@STONEBROKEGARAGE]

I'm not sure I've never don't it that way , pretty sure it would.

[@cperez8203]

I'll try doing it👍, and let you know if it worked

[@mikethaxton1799]

I used a 2" n a 3" lowering blocks together n lowered the torsion bars all the way n my truck sat level

[@mikethaxton1799]

I also removed one of the leaf springs

[@InherentTrash]

Do you have an Instagram? I wanna see it lol

[@InherentTrash]

Do you have an Instagram? Lol

[@luismartin7886]

What did u mean by the car wont drive the best

[@STONEBROKEGARAGE]

It’ll be very bumpy since you will most likely bottom out a lot

[@ed_savant]

@11:15 what size socket is that ? for the torsion bar

[@STONEBROKEGARAGE]

I believe 14mm I'm not to sure it's been a while

[@kevinkevin1730]

What’s the type of lowering blocks you bought ? Belltech but the 6203 --6100 ?

[@jacobstewart1600]

Which way does the wedge go if you don't mine me asking is it lower part to the front of the truck or is it to the rear of the truck

[@STONEBROKEGARAGE]

Taller part goes in the rear

[@gliderarts3573]

My D21 pulls to the left Crank the other tours and bar what

[@mickopaparo7378]

What size are the original UBolts. I have a hardbody that’s slammed but wanna go back to stock for now.

[@claysongrom6040]

Aye bro was wondering what the part number for those blocks

[@johnnymills1594]

Also bump stop removed, middle leaf spring removed.. mine was 2 half inches from laying frame

[@STONEBROKEGARAGE]

that was one low hardbody !

[@johnnymills1594]

@@STONEBROKEGARAGE yes sir, I loved it , till a drunk had to mess that all up for me. I've been thinking about doing another, letting my daughter take it.

[@alecfleming373]

Johnny Mills Best move on that... Have you noticed the appreciation on the value of these little trucks now that we can not find them?

[@jeffreymessner4571]

I have a 95 Single Cab. Lowered as low as it will go in the front. But dude I bought it from put 3 in lowering blocks in back under the axle and the bed looks like its a hot rod. How do i lower the back at least to even it out? Any Ideas

[@alecfleming373]

@@jeffreymessner4571 C notch the frame? How about removing any bump stops?

[@penninviisaampi]

Where you order these kind lowering kits ?

[@STONEBROKEGARAGE]

Bell tech

[@penninviisaampi]

@@STONEBROKEGARAGE thanks, even find a store in finland so its easier to buy :)

[@penninviisaampi]

@@STONEBROKEGARAGE Thank you so much

[@ShiftyReaperGaming]

Were can I order it and can I get blocks that get me lower then that

[@STONEBROKEGARAGE]

Belltech.com & you can stack blocks but I wouldn't recommend

[@Brooklyn_Powers]

STONE BROKE GARAGE Yes, not a good idea to stack blocks.

[@sofreshandsokleanempire5023]

So to raise it back up from the front just go the oder way?

[@STONEBROKEGARAGE]

Yes correct

[@dominiccuevas8983]

How low can i go with a tire that had no stretch

[@STONEBROKEGARAGE]

depends on what size rims you running

[@__Cperez]

did you have to trim the drive shaft

[@STONEBROKEGARAGE]

Nope !

[@__Cperez]

@@STONEBROKEGARAGE just did the 4” blocks and leaf spring hanger redrill and i feel like it’s binding up

[@VOTsaner]

Where did you get the blocks

[@STONEBROKEGARAGE]

Belltech.com

[@dfitzwm]

I honestly miss my hardbody so much maybe I should get another one? it was slammed with rays reps with that static bounce

[@InherentTrash]

You’d love mine then lol you perfectly described it down to the wheels

[@ft_541]

So is the rear lower as is here? How much is the difference? Day time video

[@STONEBROKEGARAGE]

4"

[@hawaiiaction.1976]

Did you measure the front height both sides.after you drive it the suspension settles and it goes crooked till you adjust it the same and test drive then check height

[@STONEBROKEGARAGE]

yes , both sides are even in the front

[@hawaiiaction.1976]

@@STONEBROKEGARAGE o.k

[@jasminedegollado4192]

How did you lower it more down from the front wheels ?

[@uleashthepower]

Take the bottom leaf spring out, flip the leafs and youll tuck in the rear

[@SnakesTheBas]

I gotta 86 with 3 inch blocks on 16s and i have like 3 inches from tires to the body and comparing to what you did just from the video i should be hella lower than what i am idk if theres a difference between the 93+ to the 92-

[@ss90CannibalKing]

What are the exact measure of your rims?

[@chilladudess]

How much clearance would I have in the front on the stock 14’s I want it lowered fully so I can measure up some new wheels but don’t want it to rub and then have my truck squatted

[@STONEBROKEGARAGE]

I think you would have less clearance with the factory 14" rims then a 17" with small tire but it all depends on what drop you have, what size rims, & what size tires. I can't really help out to much man

[@isrielgonzales5753]

This is a lot easy if you use jack stand right in front of the leaf hangers and let the rear suspension droops so there’s no load on the suspension. You then unbolt the a us a jack to lift the axle so you can slid the blocks in. This way also Make it easy center your axle in the case the axle slide alittle to one side.

[@yama_desuwu]

Idk if someone already asked. Whats the part number of the block kit

[@calvinbennett8556]

Which way did u put angle of block high side to center or rear

[@STONEBROKEGARAGE]

tall side in the rear

[@punktastic5952]

you know a good place to buy flip kits to lower an axle? coz my springs sit on top of my axle.

[@STONEBROKEGARAGE]

I'm not to sure tbh man

[@Okaloosa850]

Could u post tge link where u got the lowering blocks from

[@legendblue1222]

So are the slanted blocks better or the the straight blocks are better ??

[@STONEBROKEGARAGE]

The bigger the block the more you want/need tapered blocks. tapered blocks are better overall

[@Ls.nando05]

My uncle used to have a hardbody in highschool and he told me today if I get a hardbody when I turn 16 he will lower it for free😂

[@STONEBROKEGARAGE]

That's wassup!

[@CarlosRodriguez-mw3xm]

Looks firme, what size of tires?

[@STONEBROKEGARAGE]

195/50R15

[@DaXielDaX]

Hola!! En angulo queda hacia adelante o hacia atrás... baje mi b2000 pero tuve que empujar el eje hacia adelante con fuerza para encajar ( puse el ángulo hacia adelante ). Y a veces hay un click o ruido raro....

[@Rp-gs4ut]

Stone broke garage Where did you buy the lowering blocks? I been looking everywhere and I cant find the beltech 4" blocks with the taper. I only found 3 " tapered and the 4 " with out the tapered

[@STONEBROKEGARAGE]

i beleive all 4" belltech lowering blocks are tapered , I'm not 100% though !

[@Rp-gs4ut]

What do you think about DJM Lowering blocks? Those are the only ones I found that it specifies that is 4" with a taper

[@IvanGarcia-re1zj]

Aye bro so I got how 2 lower the back of the truck but the 2 slower the front u just loses up bolts ??

[@STONEBROKEGARAGE]

Yeah pretty much. The more you listen the bolts the more it drops

[@Carlos-fi3xr]

Hey i got a trade in of a hardbody but it’s lowered and it’s bouncy I hate it. Do you know if it’s hard to remove those things

[@STONEBROKEGARAGE]

Same way I did it but reverse

[@mcneileosis]

How do you reindex the front Torsion bars

[@eloyreyvlogs175]

Where you buy you rims and size ?

[@bayleyfearn9676]

Nice truck I have a both a wd21 terrano and a d21 navarra we call them here in New Zealand

[@bayleyfearn9676]

The terrano is a 2.7 turbo diesel and the navara is a z20

[@STONEBROKEGARAGE]

is the navara a pickup or like a pathfinder?

[@bayleyfearn9676]

@@STONEBROKEGARAGE the terrano Is like a path finder The navara is a pick up its similar to a hardbody but it has different front gards bonnet and grill

[@kathleenkatefraser1765]

What are your tire size and wheel width?

[@STONEBROKEGARAGE]

195/50R15 & x10

[@kathleenkatefraser1765]

Looks great thank you

[@phillipbutler7695]

Does it work on a 2000 Nissan Frontier I this is my first time own a nissa

[@watti7643]

So you basically just ruined the quarter panels of every truck by Rolling the fenders instead of getting wheels that tuck?

[@jarmyestrada]

what size are thos rims and tires?

[@STONEBROKEGARAGE]

15x10 with 195/50R15

[@jarmyestrada]

ok thank you for answer my ?? have a good day

[@Dnay5454]

Where's the reindex video?

[@00l_callsign.altyn_l00]

Will this work for a 87

[@josephgarcia8185]

what way does the slant on the block go

[@noelhernandez9531]

What size is your drive shaft

[@STONEBROKEGARAGE]

oem one

[@noelhernandez9531]

STONE BROKE GARAGE I put 4 inch blocks on my truck and it started grinning

[@rickyarroyo5889]

@@noelhernandez9531 Use angled lowering blocks to help with that, or get a custom one piece drive shaft

[@westsidekhan287]

what size r ur rims and tires?????

[@STONEBROKEGARAGE]

15x10 with 195/50R15’s

[@westsidekhan287]

@@STONEBROKEGARAGE thanks brother! i have a frontier nissan 98. can i use those same blocks to lower it? i got a new paintjob and looks sweet. but i really wanner lower that sucker asap lol

[@brandonb6903]

Where can i order those for my d21. Can u link it in the description. I would like to get the 2-in drop in the back

[@STONEBROKEGARAGE]

I don’t have the link but you can find them on bell tech website

[@killianlebarbier1164]

Can’t find these blocks anywhere

[@STONEBROKEGARAGE]

Belltech has them on their site

[@MrSoeiro66]

Hey bro! I got an Nissan d21 diesel but the hardbody is made off hood so that can influence the stancing progress?

[@STONEBROKEGARAGE]

can you repeat the question? I couldn't understand

[@MrSoeiro66]

@@STONEBROKEGARAGE sorry bro xD I was sleepy AF. I also got a Nissan D21 but the hardbody is not made from metal is, is made from wood, can that influence the slamming process? My English is not the better since im Portuguese

[@TheKalebSamuel]

Hey bro do you know the offset on those wheels? Cheers bro

[@STONEBROKEGARAGE]

0 offset

[@ggua92722]

Where in California do you live? Maybe i can visit you if you are not too far for your expertise how to lower my 1995 Toyota. Let me know please. Thanks

[@tristanbiddinger6104]

are those rims stock?

[@FishingWithSails]

Great vid! Was wondering if its the same process and parts for Datsun 720. I know the D21 and 720 are similar but idk how similar.

[@STONEBROKEGARAGE]

Yes, pretty much the exact same

[@ed_savant]

aye bro do you have a link to where to get, the lowering blocks you got ?

[@STONEBROKEGARAGE]

no sorry , go on belltech.com and you'll find them there

[@ed_savant]

@@STONEBROKEGARAGE do you put the short tappered side of the block, facing the front or rear of the truck

[@calvinbennett8556]

Did u take bump stops off front ??

[@STONEBROKEGARAGE]

yes front bumpstops removed

[@curtismcquiston3192]

And also lowering the front end the way he does it tires will last you about a month they will look brand new on the out side and steel belts hanging out on the inside

[@STONEBROKEGARAGE]

if your toe is on point it will last way longer , thats what chews up tires more thwn anything. 2°of negative camber isn't even bad. I've ran my other truck for about 3 years without showing and bald spots and I got the tires used. that tells you something

[@Nightfiresabre]

I had a '96 with the tosion bars all the way down, loosen the two bolts holding the upper control arm on and put I believe two, (maybe three, thinking it might be one 1/8" for every inch lowered) 1/8" shims in and tighten those bolts back down and your tires will be straight up and down again and will wear like normal.

[@DmitriyPanasyuk]

Can you do this on a 1999 nissan frontier xe

[@STONEBROKEGARAGE]

I believe you can

[@DmitriyPanasyuk]

@@STONEBROKEGARAGE I cant find any information on my 1999 nissan frontier xe (I cant afford anything better right now ) online or on youtube even for simple alternator change ... Don't understand how its possible ,.. Its like the ghost of trucks. Now im stuck finding out how to do everything from trial and error and self knowledge .

[@PlsCallCYFS]

Dmitriy Panasyuk does it have leaf springs? if so they’re all the same thing

[@DmitriyPanasyuk]

@@PlsCallCYFS its the stock suspension , so im not sure , I just got it last year with 89k miles was garage kept by some old guy

[@wbonilla35]

bad ass what size are tour tires

[@rickcreations1320]

"Made to be slammed" lmfao

[@bjtuazonjr4489]

How inches did u drop?

[@ryanlott6309]

Just an FYI u bolts are not supposed to be reused.

[@jennifertrayer5546]

What siz rim did u use

[@STONEBROKEGARAGE]

15x10

[@jerronnichols4519]

How do u reindex torrsion bars ?

[@jabezvasquez5446]

When you put the slanted blocks in how do you know where the high side goes

[@STONEBROKEGARAGE]

Tall side goes on the rear

[@cosmic1663]

What is the model number for the blocks?

[@STONEBROKEGARAGE]

www.autoanything.com/suspension-systems/61A6131A0A0.aspx

[@CasinovaGaming]

What are the wheels/specs? I really like them. Great video