How to Narrow your VW Bug Beam / And we're giving it away!

How to Narrow your VW Bug Beam / And we're giving it away!
Today we take the lowered Volkswagen Beetle beam we did in and earlier episode and show you how to narrow it.
This was a Type 1 Volkswagen ball joint beam (Beetle, Ghia, Thing) we had laying around so we decided that when we were done lowering and narrowing it we're giving it away. So make sure you are a subscriber and comment below to win. You can also comment in the "How to lower your Bug for Free" video for another chance to win.
Link here: • How to Lower your VW B...
Giveaway Update here: • Volkswagen Bug Lowered...
#aircooled #lowered #VW
Video Disclaimer:
The content of this video is for entertainment,
the techniques we use in this video work for us but they may not
work for you.

[@RobStapleton]

Don't forget to Subscribe! We'll pick a winner after we hit 500 Subs!

[@dmwgreywolf1123]

Hey guys, really, quit moving the goal posts wouldja? Ok, in case you didnt notice. 3 vidz ago you said you were giving it away, 2 vidz ago you said just comment on one of the two vidz and a drawing would be made of those 2 vids and flip for winner. Then this vid comes out and you say we gotta say "im in" on this one. And now your saying its not until 500 subs? Losin cool points fellas.

[@RobStapleton]

@@dmwgreywolf1123 this is the second vid we were talking about.. the other one was just an update.

[@RobStapleton]

@@dmwgreywolf1123 Also the first vid says to say I'm in... Sorry for the confusion.

[@MrStan7476]

I am in

[@jerrydunbar9841]

I’m in ! Just ran into a wheel and tire package where this is a must!

[@johnstephany4029]

I’m in!!! Awesome and talented work!!!

[@benjamincramer7750]

I’m in!!! I need to get one for my 66 and can’t beat free! Great video guys!!

[@tjaysughrue]

I’m in, nice work guys. 👍

[@jimmyconner4186]

I'm in guys, great video by the way!

[@pauldavy9374]

Sweet!! I’ve just been thinking about narrowing my beam🤩

[@philiprowe5242]

I’m in, wish I had see this earlier. Nice job guys

[@dougmittleberger8802]

I'm in sure could use one right about now, thanks for the demo

[@VWJawbreaker]

Well done my friends, excellent video.

[@RobStapleton]

Thanks Jawbreaker!

[@TorquePowerVideo]

Count me in. I'd love this for my Thing!

[@mkeeg590]

Awesome video guys!! This would fit great on my 66 bug.

[@surlycrosscheck1]

Subscribed! I’m in! Nice work!

[@vintage76vipergreenBeetle]

Good info on the steering box small tabs.

[@frankiebrabin8003]

I'm in,would rock it with pride!

[@Staygoldfarms]

I’m in. Lol. Great information guys

[@matthewchilders5263]

I'm definitely in!

[@KrazyAdventuresof626]

Oh I can’t wait

[@stoneystone1583]

I would love to have that on my double cab truck Thanks for your videos they are self learning it’s nice to watch a video that you can learn from you guys are awesome

[@jameswright7382]

Type 2s have a completely different front end. This would never fit a type 2.

[@sameersmerchant]

Awesome, good stuff

[@davidhuckaby8911]

Awesome!!! This video helped me 100%

[@RobStapleton]

Glad we could help! Thanks for watching.

[@pierreduplessis1507]

I really enjoyed the video.

[@BIGG-MATT]

Love it and need it I'm in!

[@mauropari1840]

Nice job there boys ,nice to have a brain and talent ... I love to put that beam in my dune Buggie

[@kingnothing9572]

Im in bro!! But I won't be home from Afghanistan until March 2020. Hope you guys had a great Christmas, keep rocking out the DIY Videos.

[@GreenMursey]

Awesome video! This would be awesome on my build! Good luck every1!

[@orangebox05]

I’m in, great video

[@flounderflop1]

I'm learning to weld so this is awesome

[@ryanlowther6447]

We will be doing some welding tips soon so stay tuned!

[@frankfullone5283]

Love the video your both doing a great job keep it up 👍

[@ryanlowther6447]

Thanks!!

[@luisliboy2558]

I'm in for the win!!!

[@billyhetzel]

Im in guys love this channel 🤘

[@RobStapleton]

Thanks William!

[@friedcolor8522]

great! im in.

[@allhyped3128]

I'M IN!!!!

[@mutante361]

I’m in!!

[@buggybatty2238]

I’m in ! GOD BLESS THE USA... XXX

[@ericgarner889]

I'm in awesome work

[@arbiewolfe3027]

Safety tip... glasses and gloves with a plasma cutter are 2 and 3....most important thing is a respirator...regular use of a plasma cutter without breathing protection will mess your lungs up badly and permanently.

[@JohnSmith-ff1rk]

Im in....Hell ya, Im in!

[@johnkimball4864]

great work as always from demon motorsports

[@jeatonhd]

I’m in!!!!

[@brianhenry9564]

I'm in!!!!!

[@mancaveproductions00]

Great

[@leonfinley9659]

Not sure if its to late but I'm definitely in . If not I may try to make it myself. I would like to add the adjustment screws.

[@jerrylopshire1160]

I'm in nice job

[@carlosramos6536]

I’m in 👍🏻

[@Juan-fu6vq]

I'm in !!!

[@4x4loz97]

Yay 😁

[@ThePaceVlog]

When you take out 2 inches from either side and offer it back up. Surely it will hit the body? Or am I missing something

[@Lee_Etterling]

I'm In!!

[@levishoup3106]

I'm in need to get the beetle lowered

[@raghudas2781]

i'm in !!!

[@TorquePowerVideo]

I'm in!

[@techhead11]

This would be perfect for my project!

[@RobStapleton]

What are you working on?

[@techhead11]

@@RobStapleton I have a 76 type 1 that I'm trying to make into a low cruiser. I dropped it in the rear already and put drop spindles on the front but it's still not low enough haha.

[@RobStapleton]

@@techhead11 Cool.. This beam would be perfect!.. good luck!

[@SolitaryCanid]

You can also use a hose clamp instead of tape.

[@saltlifebuggin]

I’m in 😎🤙

[@davidfrancies8105]

Im am in!

[@edwardlocke874]

I’m in !

[@alecjones7299]

Forgive me for an ignorant question, but why would I want to do this or what advantages would it give me or what type of project would it be good for? Thank you.

[@jeremymarano4866]

Sweet, gotta get a welder so I can learn to do this.

[@ryanlowther6447]

We will be doing some welding tips and tricks soon so stay tuned!!

[@Tikicar]

Would look great in my Thing

[@VeeDubP8]

Where is the ride video on that sweet rat rod?? Beam looks killer!! I came over from VWJawbreaker!!

[@RobStapleton]

Welcome to the channel VeeDub! That one would be a good Ride Run Down .

[@mikegreen2229]

I once had a split bus project getting towed. The master cylinder was missing. Before I could stop the driver, he used the master cylinder bracket to pull the Bus onto the truck. 😢

[@georgevillalba9822]

I'm in brother

[@BluebulletZx5]

I’m in

[@bretbeasy6839]

Do you know who owns the black and green beetle at the beginning of your video? I built years ago and was wondering if it was still alive or what happened to it.

[@villiematt]

Previous owner of my rail hit a tree my beam is bent can’t keep tires on the right side so I’m in

[@dmwgreywolf1123]

Im in.

[@cnunamker]

I'm in it

[@beagfam]

I’m in.

[@tecbug63]

I'm in

[@albertmuro8477]

Im in....what's your guys opinion on an shocktower less beam...safety/ride quality....can we get an how to properly narrow tierod tubes...thanks.

[@RobStapleton]

I like that idea! We'll try to make a video on that in the near future.

[@bretbeasy6839]

where did you get the pictures of the black and green volksrod at the end of your video? I built that years ago and have been trying to track it down.

[@RobStapleton]

I took the pic... Email me your contact info and I'll pass it on to the owner.

[@jessecrossley1281]

"I'm in"

[@aliciabarbarini1640]

Im in

[@atari1977]

Count me in! 74 VW

[@sebastiengeerens5158]

I m in

[@yourhandle2024]

I’m in! Too late?

[@SSTools1]

I am in

[@frankwilliams5460]

count me in

[@brianhirtch]

A free narrowed beam, sure would fix my tire rub 😎. Im in

[@derickg3657]

I'm in but don't know how I'm gonna get it shipped to me

[@bux49]

You forgot to shorten the leafs.

[@SpiderMan-ms8rp]

Iam in

[@lilleed]

Who won??

[@musclecarfan70]

I'm in lol

[@pint4907]

An I late?? I’m in

[@deathkeggerify]

Is it to late to enter 😂

[@vwdemoreno876]

Compas conprese una luz no se be nada

[@jessecrossley1281]

Beam me up Demon Motorworks!

[@VWLifeVW]

i'm not in :)

[@ryanlowther6447]

Haha well thanks for watching anyway!!

[@hairychris71]

As a custom motorcycle frame builder, I'd probably have opted to sleeve those joints as well, for added strength. You could either have made up some snug fitting sleeves of say 1½ inches long, slid them on before you welded the tubes, marked ¾ inch either side of the join, for alignment, then welded your sleeves in place or even just tacked some bits of flat in place and formed them around the tubes, before fully welding them in position. Not a criticism - you do good work and my ways are probably overkill, but as a time served welder, I guess I tend to over engineer things - better to be safe than sorry.

[@d5291]

I’m in!!

[@ronniecairnes7182]

I’m in!!!

[@badpunker68]

I’m in!

[@duggravs]

I'm in.

[@mykesiviter3397]

I’m in

[@douglasmorley1953]

I'm in

[@blakeerdmann]

Im in

[@barryshoup8831]

I am in

[@d5291]

I’m in!!