The ultimate Ls swap guide. kzbin.info/www/bejne/bHPFc4mCfbKFiaM
@imanafrikan3 жыл бұрын
4 min into the video, I like the way you take your time to explain ---- I do the same when talking to customers about their repair nice job man
@pyramidhead04203 жыл бұрын
Thanks for the information man. That's the most valuable thing around
@jabocjacob70643 жыл бұрын
If you use a griffon radiator, you don’t need to cut the core support. It fits perfect in the opening with 1/4” truck cap mounting foam. GRI-1-25271-X Nice build 👍
@kapitalmak25213 жыл бұрын
do you think this works for a 91 sonoma too?
@elsydeon6663 жыл бұрын
I love the header recommendation. I've never seen that before, except with Jeep 4.0 manifolds. Jeep does it to keep the manifold, which is really a header, from cracking due to thermal expansion. I also laughed when the trucker flipped you off right as you were filming him.
@robertstoyles3 жыл бұрын
Your truck is awesome I'm bout to start a lsx swap on a 91 4x4 s10 any tips and advise are greatly appreciated
@jodypierson31374 күн бұрын
If you do the motor and transmission together jack the rear of the vehicle up a couple feet then you don’t have to mess with cab mounts it will go right in
@stevevanhook14133 жыл бұрын
Use a Corvette front runner setup on the front of the motor makes life way easier and you can keep the radiator in the stock location.
@willygarcia47643 жыл бұрын
Thank very much I have all those issues now i know what I need to do thanks man u just made my day god bless u Keep it up theres more people that have the same issues but thanks for sharing your knowledge
@LsBluu3 жыл бұрын
Awesome man! Glad it helped you out!
@paxhumana20153 жыл бұрын
@@LsBluu , out of curiosity, but have you also applied these things to either a GMC S-15 Sonoma or an Isuzu Hombre before, out of curiosity?
@LsBluu3 жыл бұрын
@@paxhumana2015 I haven't had first hand experience with it, but I would really say that the frame and everything is the same on the frame wise with the engine.
@michaelwatts30845 ай бұрын
I'll be starting a s10 ls swap n3xt year I'll be checking back to your videos man I see the video is 3 year old but I hope I can find what I need
@nathanlee74113 жыл бұрын
Lovin my 2003 S10 with A 4.3L V6 With Cold Air Intake & 1” Raised Intake & A Positive Rear End, Its Got Some Jump Power To Take on A Toyota Tundra off the Line thru the 1/4 Mile Say Hello Tundra to you Maker Your Just too Heavy To Jump the Gun, Your Big I’m a Baby But Gone Byby💪🏾
@paxhumana20153 жыл бұрын
@NATHAN LEE, that is nice, until you get he NASCAR spec Toyota V8 engine, then go beyond its stats, and it makes your ride look absolutely slow.
@nathanlee74113 жыл бұрын
But Only Off The Line I Said A Toyota Tundra 5.7 Is Just Too Heavy off the Line My need To loose Some Weight Anyway too Heavy Jump some Weight Off and then Get Beside a S10 With Little bit of Power 4.3 with Small Mods Can Surprise youn💪🏾💪🏾💪🏾
@danhoy8356 Жыл бұрын
I’m going to be starting a l33 swap…. So I’m subscribed!
@LsBluu Жыл бұрын
Thank you!
@MIC-LS2 жыл бұрын
That is funny, I just read your hat in this vid. Springfield, KY I came from Springfield, MA
@DennisMurphey3 жыл бұрын
I would like to do that swap in a Blazer and keep the 4X4 drive and suspension for street rod not drags. Pretty darn nice truck there. Great Tips, Dennis in Virginia
@godloveus19732 жыл бұрын
I have a 1998 chevy s10 4.3 4x4 5 speed 18000 miles run great for sale
@scottc4433 Жыл бұрын
I did the swap . Hamburgers ls swap pan , modified truck manifolds is what I found to work best . Got my mounts and power steering bracket from dirty dingo .
@scottc4433 Жыл бұрын
Also hooker black heart steering shaft and a/c heater box cover really helped
@wadebonhomme2142 Жыл бұрын
Appreciate you doing this for us, quite a few good time saving tips!
@bradyshinsako3 жыл бұрын
Thank you buddy my trucks coming along pretty good right now im working on it as I type this out lol. Pulling the drive shaft then soon the motor
@heatedheavy4072 жыл бұрын
Middle finger was my favorite part lol
@LsBluu2 жыл бұрын
Totally forgot about him doing that. lol
@jackeasterwood51812 жыл бұрын
Just bought 1994 s10 with v6 vortec.saving for 540 hp ls gonna take me around a year to complete the build but can't wait for finished produck
@walasiewicz2 жыл бұрын
Do you know you can put a pry bar in that water pump neck and turn it. It's just a steel pipe that's Pressed in and with enough force you can clock it any direction you want without cutting it
@sjrsloan3 жыл бұрын
i used my truck oil pan,notched the belly,works fine does stick down a lil farther,and i used the flowtech long tubes 1 7/8 went on pretty easy but they do wrap around the frame,but 450.00 vs 8,9,or 1200.00 lol works for me
@LsBluu3 жыл бұрын
I'll have to look into the Flowtech headers.
@sjrsloan3 жыл бұрын
@@LsBluu man there pretty decent,build very well,cleared my factory steering rod with no problem,there long too, there even with the tailshaft on turbo 400
@DIZ4SHIZNITS3 жыл бұрын
Bet it’s loads of fun can’t wait til I do it to mine
@bwut79933 жыл бұрын
Awesome info, thanks! I’m having issues clearing the firewall I’ll probably have to prop up the cab some like you said, thanks again!
@LsBluu3 жыл бұрын
You may need a whooping device to clearance a couple spots and bend the pinch welds in
@mylesakatrm43883 жыл бұрын
Thanks for sharing the info! ✌
@rustyjunk90083 жыл бұрын
Nice tips
@willkincaid58413 жыл бұрын
I love this truck and I'm planning on a s10 project street/strip. I haven't decided if I want to do an old sbc or a ls swap. I'm not sure if you did a video on what it costs roughly for a ls swap + parts that would be awesome if you could or would. I fully understand if you don't want to put all your info out there or mods. But I'm just looking for a rough guess. I found a nice chassis with no engine or trans so less work for me.
@texastootin16282 жыл бұрын
Old school sbc is a little less $ and a little easier but if you put 3-5k in the engine and drivetrain with an LS you can make 500hp super reliably
@marklinkous2192 жыл бұрын
I have a red s10 with the same wheels still a 4.3 I haven't had it that long I'm just driving it and fixing small issues
@K1DWOLF3 жыл бұрын
THANKS BIG GUY!
@davidconley36103 жыл бұрын
Thanks for your knowledge 👍
@johnherman57833 жыл бұрын
Fti. converters and TRANSMISSION s deland Florida..the best people and equipment for you ever!!
@steppydaddy972 Жыл бұрын
Awesome info
@RobbyVsGarage3 жыл бұрын
Gen IV truck water pumps are already a virtual spout so you don't have to cut it, just fyi.
@ericwilkes2383 жыл бұрын
Thanks man
@danielreynolds37432 жыл бұрын
what's the best headers for a 1st gen s-10
@miniz83443 жыл бұрын
My 1998 base model s10 came factory with the none ac heater box
@LuisGutierrez-pm2eq3 жыл бұрын
I got a 2000 s10. Woth a 2.2. Everybody smokes me but. Im gonna do an 4.8 swap on it. But i was woundering did you use the same 4.6 computer or did you buy the plug and play wireing oh and the motor mounts ??? Plz let me knw so i can prepare
@robertgreat17463 жыл бұрын
Good information.
@mannmadesbc3 жыл бұрын
Great tips Bro!
@joecameron34063 жыл бұрын
Great information project 94 SS 6.0 is about to get underway this weekend I only need to find a 3k stall converter yet
@LsBluu3 жыл бұрын
Get a 3600 stall. You won’t regret it.
@joecameron34063 жыл бұрын
@@LsBluu I'm running sum-8707 cam 3.42 rear gear trying to figure out how to send short video of it running
@LsBluu3 жыл бұрын
@@joecameron3406 Do you have instagram? Send it to me there @terrell.power
@mikecroslin37432 жыл бұрын
What yall think a late 90's model s10 with a clean 5.3 swap is worth? Everything works
@hotrod76.3 жыл бұрын
Great video. Thanks
@trevorstaub28863 жыл бұрын
Great video and info... Question for ya what motor mounts and trans cross member you using?
@LsBluu3 жыл бұрын
I am running CPW 2.8 poly mounts and factory transmission crossmember that has been modified some.
@jackeasterwood51812 жыл бұрын
#LS=LOVESPEED
@nivesknight3 жыл бұрын
Heat rises... you want the water going over not under your intake.....
@peteJoseph-x3h Жыл бұрын
Good tips all….
@newmexicosaint2 жыл бұрын
I think that you accidentally inverted the header part number Headman shows that header as 45906. Killer video by the way
@LsBluu2 жыл бұрын
Yea I didn’t realize I got the number wrong until after it was uploaded. I may have addressed it in the description.
@zachawge85763 жыл бұрын
Just subbed 👍 do you ever plan on doing the terminator x in the truck?
@LsBluu3 жыл бұрын
Thanks man! I plan to do that with the next engine.
@floridaasshole7992 Жыл бұрын
Mines next
@user-oc8xc1eo4i26 күн бұрын
Coil springs I got a 97 4banger, do i need v6 spring?
@dannylee9138 Жыл бұрын
I have a 2002 s10 2200 engine can i use the wiring harness from a 2007 chevy 5.3 van
@charlesbrigman12911 ай бұрын
Do you do the 2.2 the same way as far as wiring as the 4.3 I got a 2.2 5 speed wanting to convert it to a 5.3 with a 350th trans with a 3000 stall easiest Way to wire it with out the transmission wires and will it work with out hooking them up to program the motor
@TheREALJosephTurner Жыл бұрын
Is the firewall openings the same between an AC truck and a non-AC truck? In other words, does the firewall have to be modified to install a non-AC heater box?
@LsBluu Жыл бұрын
This truck was once an AC truck, the non AC box was a direct fit. No modifications needed.
@jackperry93692 жыл бұрын
Thanks sir for sharing your aggravation
@chrishall4373 жыл бұрын
I wish I could find those headers I’m in the middle of the same swap and I’m debating on headman 45900 or flowtech has some long tubes out too.
@LsBluu3 жыл бұрын
I believe they got snagged quickly.
@seagate403 жыл бұрын
I’m using the ctsv pan but complete crossmember is cut out and chromoly tube welded across, and I was wonder if you could shed some light on driver side fuse panel n stuff mines all there still n want it all gone what needs to be done any help would be appreciated but it’s a 2001 tho.
@jackperry93692 жыл бұрын
More ls swap s10 builds
@kylewesson56853 жыл бұрын
Good job bro on the video did you still have to cut the cross member using the muscle car oil pan
@SOLDOZER3 жыл бұрын
No.
@jamesd25142 жыл бұрын
I have a 1996 short bed stock rear suspension minus the overload spring with soon to be caltracs…what size slick can I install on a 15x8 wheel with ? Backspacing factory wheel looks like 4.5” backspace and appears I could move it in more…brand of slick recommend also, for weekend track visits only …thinking Hoosier or MT maybe 28-9.5-15 ? Thanks
@roadjokers64673 жыл бұрын
GREAT VIDEO MAN & I have a 93 s10 with a sbc thinking about going with this 5.3 ls I got how much think it will cost to cut my driveshaft
@skrip21433 жыл бұрын
About 200 or less
@bryanbyrd59803 жыл бұрын
Where did you get your hood? I'm building a 2002 GMC Sonoma extended cab flare side any info would be appreciated thank you for your time.
@sanron22052 жыл бұрын
Would this all work for a 92 s10 blazer?
@MrBdmfps93 жыл бұрын
Im getting ready to start a 02 xtreme blazer build, my boss has a bb settin the corner of the shop. Thinkin about maybe trying something with it and a glide to back it up. Any ideas on how it might fit
@LsBluu3 жыл бұрын
Probably going to be super tight and use those frame wrap around headers.
@MrBdmfps93 жыл бұрын
@@LsBluu i wonder if it would be cheaper for someone to build me a set or buy the crazy experience ones
@peteJoseph-x3h Жыл бұрын
GM muscle car pan = Hummer H3 pan.
@removeableskull74463 жыл бұрын
How did you wire the fuel pump
@Sys-Edit0r-19953 жыл бұрын
Im not a car guy but I really want to get in this, I have a stock 95 2.2L 5 speed if I were to put an LS motor in it would I need to upgrade the trans and rear differential?
@carterstrasser71103 жыл бұрын
I have a 98 Sonoma ls swapped. I’m looking for a wider set of wheels and tires for the rear. What size wheels and tires are you running ?
@bryonsusedautos3 жыл бұрын
Are you going to the no prep race next saturday?
@jeffgoodbar Жыл бұрын
Once you drill and tap the waterpump for coolant line, where do you run it if I don't run a heater core in my S10?
@LsBluu Жыл бұрын
The little U shape rubber hose
@scottc4433 Жыл бұрын
You don’t have to drill water pump . You can t the vent line into upper rad hose
@williammendoza38682 жыл бұрын
Anyone find that oil pan?? I didn't see it on the jege website
@lyle7657Ай бұрын
You can also use a 08 hummer h3 Alfa 5.3 oil pan. I used that on mine. No clearance issues
@abarnes03303 жыл бұрын
I have a 2002 S10 ZQ8 X-cab ready to do this swap... #1 Why did you go with a modified Ford 8.8 instead of using a 8.6 S10 ZQ8 rear? #2 Ive heard S10 Blazer gas tanks can be used behind the Diff w/ the Spare tire carrier removed...You know anything?? #3 Do you think there is enough room to retain the condenser in front of the radiator with the way you moved it forward? #4 Ive watched your vids several times each..and hang on every word..because ive been intersted for several years in doing this swap. But everyone seems to cut their frames and crush the firewall to stuff it in..Dont wanna tear up my Baby! #5 Congrats on making to the 10s..
@beardedforlife37402 жыл бұрын
S series trucks didn't have a 8.6 rear end. The biggest they came with was a 8.5 and that only came with the ZR2 package
@abarnes03302 жыл бұрын
@@beardedforlife3740 ..Sorry my friend, mine has the 8.5 Limited Slip diff with the Anti-hop shock. It was an option for these ZQ8 trucks. Or maybe mine is a unicorn, if you need to justify it in your mind with your information. But, I've never swapped the rear out of it..and it loves to spin both rears. Hence, the reason I don't drive it in the snow or rain. Bought a KIA for that shitshow.
@RockyX133 жыл бұрын
According to your hat you're in Springfield KY? I'm in Springfield TN. Do you have a shop that does swaps? I'm currently shopping around for someone to do my swap. I've got an 89 S10 with a 350 TBI currently and want to LS swap. A car accident has taken my ability to do a lot of labor intensive work on my own... I already have the budget, just need a shop that knows what they're doing and would like the job.
@williamprettyman67082 жыл бұрын
Which motor mounts re you using?
@jamesnickol34 Жыл бұрын
Did you notch your frame to fit the oil pan?
@LsBluu Жыл бұрын
No
@hunters16013 жыл бұрын
I am really considering building an s10 but as a student in school I would daily drive this, would this setup last a decent amount of time or should I just wait and settle for a boring reliable car/truck.
@LsBluu3 жыл бұрын
Mine has been on the road for almost 3 years and has done fantastic. As long as you take care of it, it’ll last you. I drive this ole truck everywhere.
@kevinhumphrey9322 жыл бұрын
When using the muscle car pan do you still have to cut the main cross member under the oil pan
@LsBluu2 жыл бұрын
I did not. It fits nice.
@kevinhumphrey9322 жыл бұрын
@@LsBluu thank you for the quick reply
@aumetalmental84033 жыл бұрын
What's the manufacturer of that hood? I want one...
@LsBluu3 жыл бұрын
Not entirely sure. I bought it second hand on a parts truck
@lisaprachnau25023 жыл бұрын
Which engine mount setup did you use to fit the muscle car pan without a frame notch?
@LsBluu3 жыл бұрын
My mounts came from CPW. I use the muscle car pan without the frame notch.
@walasiewicz2 жыл бұрын
Hey when you installed your nitrous did you tee into your primary fuel line or did you run a dedicated fuel supply
@LsBluu2 жыл бұрын
Currently it is on coming from the main feed. On the old set up it pulled from the rail.
@jccbumper13303 жыл бұрын
Soo i can't have a/c if I ls swap my blazer
@LsBluu3 жыл бұрын
Yep you can. There’s a A/C box you can get from Hooker that makes a lot of room. And you can get some A/C compressor relocation mounts too. I follow lots of trucks on Instagram that have A/C.
@PHILLIPBLESS3 жыл бұрын
I have a 02 LS 6.0 going in to an 89 s10 chassis. The problem I’m running into is that the power steering pulley is hitting the gear box. Any recommendations?
@pmotorsports82763 жыл бұрын
4.3 pulley
@brendanlubbe22592 жыл бұрын
Currently building a L33 5.3 out of a 2007 Buick Rainier and using a Hanburger's oil pan. The factory dipstick goes into the oil pan, the new pan doesn't allow this and I'll have to use the hole in the block. Do you think the stock dip stick will work and give me the correct oil level? Or is there a better aftermarket dipstick?
@LsBluu2 жыл бұрын
I am using the muscle car oil pan, and my dipstick is actually broken. I think a stock dipstick would work, but I think the oil level would be more than is in the pan.
@jericodobritz64322 жыл бұрын
What front coil springs did you use or can you use stock
@LsBluu2 жыл бұрын
I’m still rocking stock!
@tylerroe517510 ай бұрын
So does the stock transmission in these bolt right up to the 5.3/6.0?? I’ve got a 2.2L 5 speed manual 98. Very curious about it cuz I can get an LM7 or and old 6.0 for pretty damn cheap. I know the 2.2L’s are pretty much just an LS cut in half so very curious on the bell housing/clutch situation! Maybe I’ll do this swap over the winter if the 5 speed will bolt up
@lyle7657Ай бұрын
Pretty sure you have to get an adapter for the 2.2 manual transmission to bolt up
@corynotgrass62283 жыл бұрын
Did you still have two Notch crossmember for oil pan?
@LsBluu3 жыл бұрын
No. Have about 1” of clearance all the way around.
@heavypour93883 жыл бұрын
How do you get the tbss intake to fit in there? I have one but it doesn’t clear the heater core lines
@scottc4433 Жыл бұрын
I just gently bent my heater lines to passenger side . But I also have a truck manifold
@walasiewicz2 жыл бұрын
There's stainless s10 ls swap headers on eBay for $99 and they are awesome i run then I'll NEVER pay $600 for headers
@LsBluu2 жыл бұрын
The only headers that are worth that are the Mid Length Hookers.
@beardedtrucker94863 жыл бұрын
Does this apply for 1987 short bed single cab s10?
@LsBluu3 жыл бұрын
The majority of it yes, I believe the long tubes are a touch different. I could be wrong.
@RobertHathaway343 жыл бұрын
Did you have to do anything to the transmission tunnel when you put it in?
@LsBluu3 жыл бұрын
There were a couple spots that had to be clearances with a whooping device. And the pinch welds at the bottom of the cab and fire wall bent back.
@dannyvigo57433 жыл бұрын
Good 👍job
@geoloyer66293 жыл бұрын
Will 5.3 bolt to my stock blazer tranny?? 5.3 is 2001 and blazer is 2002
@scottc4433 Жыл бұрын
Just need adapter for converter snout. It’s on Amazon cheap
@mata_ls18463 жыл бұрын
What long tube headers are you using
@LsBluu3 жыл бұрын
At 8:34
@johnmunkers37593 жыл бұрын
96 s10 4x4 what would it cost to swap?
@scottc4433 Жыл бұрын
I spent 4 doing mine . Just start doing it and buy stuff as you need it . I bought a bunch of stuff I didn’t end up using
@Will_14_years_ago2 жыл бұрын
Did just the opposite on mine I put the stock 4 cyl. Out of the s10 into my 2005 4wd ext cab long bed silverado dually with a work box and welder rig on the back, i get away with this using a 2 speed power glide . I'm running 25s in the quarter mile and get nearly 22 mpg, well worth the power loss.
@KingDracSiege3 жыл бұрын
are you the owner of the xanax s10?
@LsBluu3 жыл бұрын
Never heard of it
@KingDracSiege3 жыл бұрын
@@LsBluu got u. Looked like yours had the same color as this one I saw on another video of s10s doing 11 second runs
@codyw94573 жыл бұрын
What are you using for tuning?
@LsBluu3 жыл бұрын
HpTuners
@codyw94573 жыл бұрын
@@LsBluu ever thought about going the Terminator x route?
@LsBluu3 жыл бұрын
Everyday. I think after this engine let’s go, I’ll put a Holley on and re do all the wiring.
@codyw94573 жыл бұрын
@@LsBluu I think that's my route wanna do a s10 but I see no room for boost.
@nelsonsandovaljr70473 жыл бұрын
Got a Instagram?
@LsBluu3 жыл бұрын
@terrell.power
@johnbray6146 ай бұрын
😂😂😂
@johnsheetz6639 Жыл бұрын
If you don't want to get your hands dirty. I would say it's super expensive for the average guy. Separates the men from the boys
@walasiewicz2 жыл бұрын
Yea you had a hot air intake in that picture. A lot of people make that mistake and think it looks cool. Take out a perfectly working factory cold air intake and put those gay conical filters right in the heat