Tap to unmute

How to Lube and Tension a MoYu AoLong

  Рет қаралды 192,563

Cubeologist

Cubeologist

Күн бұрын

Пікірлер: 505
@evanknowles4780
@evanknowles4780 10 жыл бұрын
"They just get the cube out of the box and break world records" That was amazing.
@Blowurmind63
@Blowurmind63 7 жыл бұрын
Time?
@samm4510
@samm4510 7 жыл бұрын
DuskGlade 19:45
@jonathangt-ramgm3nismo591
@jonathangt-ramgm3nismo591 6 жыл бұрын
Sounds like magic Voldemort
@joeyhicks1670
@joeyhicks1670 7 жыл бұрын
aulong does this process take?
@BunnyBoing
@BunnyBoing 5 жыл бұрын
Weilong.
@Brad_1511
@Brad_1511 5 жыл бұрын
@@BunnyBoing 😭😭😂
@ParkerOhara
@ParkerOhara 10 жыл бұрын
I used you tutorial and I got my time down to 14 secs. thanks so much for the AWESOME vids.
@SvenniDal
@SvenniDal 9 жыл бұрын
Just followed your guide to the 'T'. I used a 50k Silicon Lube on everything, for better control since I'm a beginner. But it's amazing! Thanks so much!
@kaiyang834
@kaiyang834 10 жыл бұрын
This video tutorial was amazing!!!! It really helped my aolong to get the feel that I like. Thanks Cubeologist !
@JosiahsaBruin004
@JosiahsaBruin004 10 жыл бұрын
lol "it seems like [Mats Valk and Feliks Zemdegs] just take the cube out of the box and break world records".... so true
@LACuber
@LACuber 10 жыл бұрын
Amazingly awesome video! Extremely great job! I will always recommend your tutorial now.
@cubeologist42
@cubeologist42 10 жыл бұрын
Thank you very much. I know it is a bit long, but it had to be to cover everything. I hope that doesn't deter people from watching.
@LACuber
@LACuber 10 жыл бұрын
I think it's great to have a tutorial that covers everything. This helps beginners a lot.
@sugamalia1456
@sugamalia1456 9 жыл бұрын
I just subscribed to u la cuber I am getting the moyu wielong 2 mini I have small hands. U think u know what u are talking about when u do bids and I think u da best. THANK YOU and will this work with the wielong?
@zxcv338
@zxcv338 9 жыл бұрын
Thanks billions. Best video I've found on this. Super comprehensive.
@S1neWav_
@S1neWav_ 8 жыл бұрын
+SarcasticDude. you're name is sarcasticdude so...
@S1neWav_
@S1neWav_ 8 жыл бұрын
+GenesiX YT (Scrub) your
@wesleywang6658
@wesleywang6658 10 жыл бұрын
Your video was awesome you cover everything I needed and its a very detailed review! My aolong is coming soon and I plan to uses your tutorial thanks!
@brodave4099
@brodave4099 9 жыл бұрын
This is one of my favorite videos.
@BobbyBriscoeBeats
@BobbyBriscoeBeats 9 жыл бұрын
Thank you for this video. I just followed along on my aolong v2, and it is super buttery now!
@BryanChiaGH
@BryanChiaGH 10 жыл бұрын
This is a very very good and detailed tutorial, Loved it ! I shall follow every step that you mention in that video :) Oh, another thing is that, i bought a Maru Lube from wallbuys and that's the only lube I have , haven't use it yet but what if i dont have other lubes? Do I just use the Maru lube and lube the cube the way you said? Center caps(2 layer inside), top of the spring, core, 2nd layer corner lubed (facing down), last layer corner piece and then 4 drops of lube (2 drops on the front and 2 drops on the back) Please reply ASAP, as I need your answers before I proceed :) Once again, Great tutorial, Keep it up ! Cubeologist
@cubeologist42
@cubeologist42 10 жыл бұрын
I have never heard of anyone using Maru Lube to lube the core and hardware. It would probably work in the short term, but the problem is with durability. You need to lube in the core to be thick and to last a long time. I love Maru Lube, but I think it is best used on the pieces.
@BryanChiaGH
@BryanChiaGH 10 жыл бұрын
Cubeologist Thanks for the quick reply! So I heard you said either cubicle's lube or traxxas lube works well, then what weight should I go for if I choose the traxxas? I'm actually trying to find a cheaper website with free shipping but I can't find any other place for cubicle's lube, the shipping cost is too much for me.
@cubeologist42
@cubeologist42 10 жыл бұрын
If you're looking for a good all-around lube that you can use on the pieces and core, I would go with Traxxas 30k. You get a lot more for your money than with other brands and I really can't tell any difference.
@BryanChiaGH
@BryanChiaGH 10 жыл бұрын
Cubeologist so you're saying one 30k traxxas is good enough compare to a maru lube + Cubicle's lube?
@cubeologist42
@cubeologist42 10 жыл бұрын
No, that is not what I am saying. Traxxas 30k is good enough to compare to a medium wight cubicle silicone lube alone. The only problem with lubing the core with maru lube is that it wears out really quickly. I would definitely recommend getting a silicone based lube (any brand will work) for the inner mechanism.
@josephsabo367
@josephsabo367 9 жыл бұрын
Thx for the upload, helped me get rid of that wrechid spring noise!
@seulmate4750
@seulmate4750 9 жыл бұрын
Did this on my yuxin and it know turns like a dream. Great Video
@shashankaluru
@shashankaluru 10 жыл бұрын
thanks a lot cubeologist keep coming back with more videos
@alon9469
@alon9469 9 жыл бұрын
I used this with weight 5 and weight 1 and it helped! Thx
@mpatel.75
@mpatel.75 10 жыл бұрын
Can I follow this tutorial using lubix and a Moyu Aolong v2 stickerless?
@cubeologist42
@cubeologist42 10 жыл бұрын
Moulin Patel Absolutely!
@mpatel.75
@mpatel.75 10 жыл бұрын
Cubeologist Thank you! I never usually get replies this fast. :)
@paolopergola7777
@paolopergola7777 9 жыл бұрын
Moulin Patel
@NicksIdeaEngine
@NicksIdeaEngine 9 жыл бұрын
Cubeologist Is the core of the stickerless aolong v2 the same as what's shown in this video? Screws, washers, springs, and all?
@NailujG
@NailujG 9 жыл бұрын
Nick Garcia yea
@EDCubes
@EDCubes 10 жыл бұрын
Thank you so much! I tried this out on my Aolong v1 and now it is AMAZING!
@cubeologist42
@cubeologist42 10 жыл бұрын
EDCubes Awesome. I still basically use this method, but I hate my tone in this video lol. It's like I was tired or something.
@alon9469
@alon9469 9 жыл бұрын
+Cubeologist Do i need to use maru lube at the end? If so, what does it do?
@EchuCuber
@EchuCuber 9 жыл бұрын
+Alex Brin Yeah if you use maru at the end it will become even better. That doesn't mean you need to buy maru lube too. I don't use maru for my cubes sometimes.
@EchuCuber
@EchuCuber 9 жыл бұрын
If you want to get your cube the best you can buy maru but if you just wanna get your cube decent awesome no need to get maru
@cubestric4568
@cubestric4568 9 жыл бұрын
Thank you so much,this,is a great tutorial...I tried this in my aolong and it works really well!
@jeffthegoose2455
@jeffthegoose2455 8 жыл бұрын
Hi again omfg I lubed my aolong gt with traxxas 50k and weight 1, and now it's my main! Omfg it's awesome and also I put lube on the pieces without breaking in and it's still great
@Briteboy678
@Briteboy678 10 жыл бұрын
I love these videos, they are awesome :)
@cubeologist42
@cubeologist42 10 жыл бұрын
Spidey Thank you!
@Briteboy678
@Briteboy678 10 жыл бұрын
I haven't had the money to actually worry about lubing and tensioning a cube, I have finally ordered a YJ Guanlong though. It will be the first cube that I will actually take care of (lubing and tensioning)
@DANversusWTP
@DANversusWTP 10 жыл бұрын
Is customization the only reason to get a stickered cube? It seems like stickerless would be better because you don't have stickers pealing or rubbing off.
@justintay99
@justintay99 10 жыл бұрын
Stickerless weren't competition legal this year. It will be next year though. Also stickerless colours tend to be crap.
@Alwaysanoob5
@Alwaysanoob5 10 жыл бұрын
is it bad that i swapped position of the washers? Instead of being inside i have them between the core and center piece, it seems to turn alot smoother, but cant help but think that it was made the other way for a good reason.
@adamforster4300
@adamforster4300 9 жыл бұрын
what where the lubricants you used in this video? and what was the traxxas one you mentioned?
@alon9469
@alon9469 9 жыл бұрын
+cubeologist can u also make a video like this for the moyu lingpo?
@vinzi9295
@vinzi9295 9 жыл бұрын
great video, really helpful! Thanks!
@Dan-zy7pq
@Dan-zy7pq 9 жыл бұрын
What's the difference in lubing the cube? Is it really worth all that work? I am most interested in the spring noise difference.
@ggggghhhyuuuikk4737
@ggggghhhyuuuikk4737 9 жыл бұрын
Does that "Lube the shiny side" of the washers make a difference? Cuz i haven't been doingn that...
@amossim4388
@amossim4388 10 жыл бұрын
Hey do i mix does 2 lube shown in the video or one will do. I am new at cubing so i do not know how and what to use to lube cube
@tempestandacomputer6951
@tempestandacomputer6951 10 жыл бұрын
My Aolong feels rather buddery on the inside and I just got it today. Is it possible it was pre lubed? If so how can I tell because I don't want to overlube it.
@kaifong0
@kaifong0 9 жыл бұрын
If I just have silicon spray can I just use that on the inside of the cube?
@cubianer156
@cubianer156 8 жыл бұрын
Awesome Video, thx man, now all I have to do is doing about 1000 solves...
@TheNetflixGamer
@TheNetflixGamer 8 жыл бұрын
Is it super recommended that you buy both weight 5 lube for the core area and weight 2 for the individual pieces? Could i use just one for both, or is this important?
@yChaos
@yChaos 8 жыл бұрын
+TheNetflixGamer I would also like to know this, interesting question Netflix.
@dannybutler8836
@dannybutler8836 8 жыл бұрын
+TheNetflixGamer Get both. The high order the lube is a thick gel like substance which are good for cores and lower order lube is lightweight so for pieces.
@bryanmontoya2690
@bryanmontoya2690 9 жыл бұрын
Is it okay if I use weight 3 for screws and springs and for the pieces as well or do I have to use a different lube for the pieces?
@Mars2030YT
@Mars2030YT 8 жыл бұрын
My Moyu AoLong does not have any washers, but it is a v2. Is it supposed to have washers? EDIT: nevermind, they are stuck inside the center pieces lol so some of the friction will still happen, sadly.
@super38294
@super38294 7 жыл бұрын
_CreeperDust_ hit the center cap on a hard surface and the washer will come out
@magicsquirrelcubing4905
@magicsquirrelcubing4905 9 жыл бұрын
I am planning to use this method to lube my new MoYu Tanglong (3x3x3). Will it work if I put Lubix on the core and weight 2 on the pieces?
@tacocubes6108
@tacocubes6108 10 жыл бұрын
Very good tutorial! I want to do exactly as you have but all I have is weight 2 silicone lube from the cubicle. Is it okay to do it all with just that?
@NailujG
@NailujG 10 жыл бұрын
Yea
@cubeologist42
@cubeologist42 10 жыл бұрын
Should not be a problem with wt2
@HraesvelgrsEggs
@HraesvelgrsEggs 9 жыл бұрын
17:07 what's that algorithm? Is see people do it when they're inviting cubes, or testing it out, what's the algorithm?
@friendlyghost4561
@friendlyghost4561 9 жыл бұрын
It's a U-Perm search it
@SuperHassaan2011
@SuperHassaan2011 8 жыл бұрын
+Sky Johnson (Tvexpert) No its an h permutation
@super38294
@super38294 7 жыл бұрын
Sky Johnson h perm
@gaminginhd2014
@gaminginhd2014 10 жыл бұрын
Hey Cubeologist, do you mind putting a list of required materials in the description? I've tried to follow multiple times, but each time, I've had to stop and find each item online. It would help a lot, thanks!
@cubeologist42
@cubeologist42 10 жыл бұрын
GamingInHD Good idea, I will definitely do that.
@davemcomie1526
@davemcomie1526 10 жыл бұрын
Cubeologist yea that would be awesome
@PaLoHQ
@PaLoHQ 10 жыл бұрын
I lubed it like this and it got slow after a couple days. How often should i use this technique to lube, i use The Cubicle w5 on core and w2 on pieces, Is w5 to slow and should go to w4? or should i lube the pieces more often.
@HoshiyomiRhino
@HoshiyomiRhino 10 жыл бұрын
You might have overlubed it which made it gummy
@XxprotegyxX123
@XxprotegyxX123 10 жыл бұрын
Should I lube this cube with crc silicone spray? I heard silicone spray wears down the cube
@vegitossb3625
@vegitossb3625 7 жыл бұрын
If you used Lube 2 in the pièces can I still use lube 5 please answer as I'm in the tutorial
@Liquoricilicious
@Liquoricilicious 8 жыл бұрын
Is 50,000 cst the same as 50,000 wt ?? (silicone differential oil)
@bagel168
@bagel168 8 жыл бұрын
I'm not too sure what u mean, but for example, traxxas (which i think is what you're asking about) 50k is the equivatlent (basically) of cubicle weight 5.
@Liquoricilicious
@Liquoricilicious 8 жыл бұрын
Alex Lu cst is used by some companies instead of weight, so I wanted to convert cst to weight
@HoshiyomiRhino
@HoshiyomiRhino 10 жыл бұрын
Cubeologist for the edges do you put lube on both sides or not because it seemed like you lubed one of the edges on both sides
@cubeologist42
@cubeologist42 10 жыл бұрын
Truong Pham I lube the bottom of the edge on one side and the top on the other.
@HoshiyomiRhino
@HoshiyomiRhino 10 жыл бұрын
Thanks for replying and clearing up the confusion for me
@brookewood8623
@brookewood8623 9 жыл бұрын
if you just us the maru lube will it be ok to use or should you just take the the whole thing apart like you did
@aryelcarreon7853
@aryelcarreon7853 9 жыл бұрын
+PIGGYCubes Unless you have Maru axis oil
@aryelcarreon7853
@aryelcarreon7853 9 жыл бұрын
+PIGGYCubes That's true
@Zekzar200
@Zekzar200 10 жыл бұрын
Question! Are you going to US Nationals 2015 July31st-August2nd?
@cubeologist42
@cubeologist42 10 жыл бұрын
Hayden Cuber I am pretty sure that I will be there.
@Zekzar200
@Zekzar200 10 жыл бұрын
Cubeologist Awesome! I'm going.
@looneyCaveman
@looneyCaveman 10 жыл бұрын
Cubeologist Where is it going to take place? I told my parent that I want to compete in a competition
@Zekzar200
@Zekzar200 10 жыл бұрын
Looney Caveman Hilton Head, South Carolina. You can look up the information at www.cubingusa.com/usnationals2015/
@jeffthegoose2455
@jeffthegoose2455 8 жыл бұрын
You just made my aolong gt a fucking beast.
@diamondgrenade6988
@diamondgrenade6988 10 жыл бұрын
I was just wondering whether this tutorial works for the Aolong V2 (enhanced) as well? Thanks.
@cubeologist42
@cubeologist42 10 жыл бұрын
Absolutely.
@trinitycardfighting2005
@trinitycardfighting2005 10 жыл бұрын
Would Z lube work on the aolong? Thanks
@gh8735
@gh8735 10 жыл бұрын
When you buy a cube from cubicle how do you get your own custom stickers with it?
@biscuitcubed2804
@biscuitcubed2804 9 жыл бұрын
gh8735 go to the stickers page and to the sticker picker and choose the shades you want. Then save them and you can buy them!
@Matt-no7gg
@Matt-no7gg 9 жыл бұрын
MoYu stickers are so thick, which may be good, or it may be bad. I found myself having a lot of trouble restickering my YJ GuanLong because of the high-quality stickers. The only problem I've had with them is occasionally they slide around on their Pyraminx and Skewb puzzles. Also, KOOOOOOOOOOB! -Jasper
@redboombuzz
@redboombuzz 8 жыл бұрын
Is singer oil brand is a good lubricant?
@hadyjaafar4303
@hadyjaafar4303 10 жыл бұрын
Is there any risks if we use this method ? Can I use it on a MoYu Aolong v2 ? And can i use cubicle lubrifiant weight 5 for the core and maru lube for the pieces ? Thanks Cubeologist
@marcuslacuesta2073
@marcuslacuesta2073 9 жыл бұрын
Hey i have this cube and i average about 50 seconds do u think i should tighten or loosen the tension more. Plz respond
@aryelcarreon7853
@aryelcarreon7853 9 жыл бұрын
It comes down to personal preference as it doesn't really affect your times. Loosening it can make the cube less controllable but corner cut better. And tightening it can make it controllable but corner cutting tends to not be as good. Hope that helps
@proffesorcuber4426
@proffesorcuber4426 8 жыл бұрын
What lube did you use? and if its not weight 1-6, which weight does it correspond to? +cubeologist
@elrickerick
@elrickerick 8 жыл бұрын
which lube should i use for a tanglong? is maru lube ok?
@WarmLoaf
@WarmLoaf 9 жыл бұрын
What method do you use to solve it, just wondering because my method take 1:20
@epicdarr
@epicdarr 9 жыл бұрын
***** no he should go ahead and learn fridrich with 2 look pll and 2 look oll. That will make him faster and make it easier to learn full pll and maybe full oll
@WarmLoaf
@WarmLoaf 9 жыл бұрын
igoturnose1 Thanks guys, I have created new ways for my method and i can get 50 second solves now, I will have a look at both of those methods and see if i do any better
@WarmLoaf
@WarmLoaf 9 жыл бұрын
***** So you're saying keyhole is way better and faster
@NailujG
@NailujG 9 жыл бұрын
***** actually Zz could be faster...
@iurigrang
@iurigrang 9 жыл бұрын
CubeArt And roux too.
@nickschiener1492
@nickschiener1492 9 жыл бұрын
how tight are the screws under the caps out of the box
@pawelwypijewski
@pawelwypijewski 10 жыл бұрын
Great tutorial :) my cube is soooo fast now :D What is the outro music ?
@linley1309
@linley1309 10 жыл бұрын
Can I follow this tutorial with calvin's lube? And very good video :)
@cheeyeemin9662
@cheeyeemin9662 8 жыл бұрын
What would happen if i wipe all the stock lube out and din't put any lube in?I know It affects the speed but what about other stuff like corner cutting?Does it affect it?
@sarthakkokane5776
@sarthakkokane5776 8 жыл бұрын
yes it does but I imagine not by ALOT just a little though it will feel dry and slow
@GonandersLetsPlay
@GonandersLetsPlay 9 жыл бұрын
Can I use Traxxas 50k on the core and weight one on the pieces an then a couple drops of Maru Lube?
@epicfuntime7120
@epicfuntime7120 8 жыл бұрын
?
@sam-kd3dy
@sam-kd3dy 8 жыл бұрын
Can you do one on the Qiyi Square 1
@nicosullivan3880
@nicosullivan3880 9 жыл бұрын
Is it okay if I put a lighter lube like weight 2 on the core and center pieces?
@vijaimanojk
@vijaimanojk 10 жыл бұрын
Which lube should i use for a moyu aolong
@cubeologist42
@cubeologist42 10 жыл бұрын
Manoj Kumar Vijai You can make it good with a lot of lubes. It all depends on how you like your cubes to feel. I use a heavy lube on the core and a lighter one on the pieces.
@Crubik96
@Crubik96 9 жыл бұрын
Which lube is better for the pieces, traxxas 30k or 10k ?
@alon9469
@alon9469 9 жыл бұрын
+Cubeologist can you please make a video on how to lubricate and sticker a 2by2 (if you can please do it on lingpo)
@manuelrojas9547
@manuelrojas9547 9 жыл бұрын
he has one
@ericcamescasse6392
@ericcamescasse6392 9 жыл бұрын
I'm guessing this works for the new batch of the Aolong V2 right?
@jorjicostava76
@jorjicostava76 9 жыл бұрын
Yeah
@jonathanarnold6384
@jonathanarnold6384 9 жыл бұрын
I had a Moyu Weilong and used traxxas 50k oil. After a few months of use I noticed that the lube had become black and it appeared the hardware was oxidizing. Is this something that can be prevented? Do an Aolong's hardware have this problem?
@biscuitcubed2804
@biscuitcubed2804 9 жыл бұрын
Jonathan Arnold The lube turning black may be the plastic rubbing off. It happens to all cubes.
@mrryanator4273
@mrryanator4273 8 жыл бұрын
What size stickers do you use?
@CreativityCoD
@CreativityCoD 10 жыл бұрын
I'm about to buy some lube for my aolong v2 coming this week, what should I get? Two kinds of lubes? And also where can I buy lube on a website that ships international? I hear people say traxxas is good but it's pretty much sold out in every shop...
@BeyBlade727
@BeyBlade727 10 жыл бұрын
silicone lube from the cubible
@SlickCheeto
@SlickCheeto 10 жыл бұрын
If there are any hobby shops around u (remote control rc shop) they will surely have traxxas oil for you
@CreativityCoD
@CreativityCoD 10 жыл бұрын
***** Thank you i've just ordered some weight 5 and 1 :)
@exemnis9393
@exemnis9393 9 жыл бұрын
Does this work on the Hualong?
@xinfinity0x
@xinfinity0x 9 жыл бұрын
I just got a moyu aolong v2 what weight should I use to lube it
@robmarks6800
@robmarks6800 10 жыл бұрын
Can you use traxxas 50k oil to lube the core?
@rodrigocastellon2256
@rodrigocastellon2256 10 жыл бұрын
What happens if you accidently lose one of the washers next to the springs?
@cubeologist42
@cubeologist42 10 жыл бұрын
Rodrigo Castellon Not much honestly. They just act to extend the life of the cube. Not really a necessary piece for functionality.
@someweeb5961
@someweeb5961 7 жыл бұрын
I over lubed my cube, but it didnt gum up, (I can tell by the cc indicators on the syringe) what should i do?
@shashwatsingh6092
@shashwatsingh6092 10 жыл бұрын
So if i have a maru lube i will just put 1 drop on all sides of the Moyu Aolong...please answer fast
@shashwatsingh6092
@shashwatsingh6092 10 жыл бұрын
actually on the moyu along v2
@vladutu99I
@vladutu99I 10 жыл бұрын
Shashwat Singh I have nothing to do with cubes yet but taking i know basic english that is exactly what he said in the video.
@youtubeaccount7512
@youtubeaccount7512 8 жыл бұрын
Will this work for a weilong?(I don't have it yet so I don't know if v1 or v2)
@ssj9devil
@ssj9devil 8 жыл бұрын
This should work on any cube. I'm waiting for mine as well... It comes April 4th...
@piercecorson6431
@piercecorson6431 8 жыл бұрын
+Joaquin Ssj9Devil today is the day
@ssj9devil
@ssj9devil 8 жыл бұрын
+Pierce Corson it actually came a bit early. It's great!!
@ecubes10
@ecubes10 9 жыл бұрын
I just got a black aolong v2 and have done 100-150 solves on it. Should I lube it now?
@gradyking4739
@gradyking4739 9 жыл бұрын
Why not?
@Bob-np9xi
@Bob-np9xi 9 жыл бұрын
I just recently got a lube for my cubes. I've done over 2,000 solves on it and I lubed it. It turned out great!
@matthewchan3082
@matthewchan3082 9 жыл бұрын
Cubeologist , can I use Cubicle weight 3 and lube both the core and the pieces at the same time?
@EkadosCube
@EkadosCube 9 жыл бұрын
No
@cubetuber4024
@cubetuber4024 9 жыл бұрын
+Martin Heung i would not!!!!
@tanyapuri9341
@tanyapuri9341 9 жыл бұрын
Yes that will make your cube much more controllable if you put that in the pieces and lube for the core will get rid of the spring noise
@EchuCuber
@EchuCuber 9 жыл бұрын
+Martin Heung I wouldn't but if you were to save money or if you like controllable cubes you can
@rodrigorodrigues8793
@rodrigorodrigues8793 9 жыл бұрын
+Martin Heung juts make sure you dont overlube the pices otherwise your cubo will get slow
@liuxoB
@liuxoB 9 жыл бұрын
does this also apply to the moyu weilong?
@ethanloy
@ethanloy 9 жыл бұрын
Can apply to any 3x3
@beetlesss2560
@beetlesss2560 8 жыл бұрын
is it ok if I use maru lube to the core of my cube...if not,what should I use to lube the core of my tanglong...I'm sorry I'm just a newbie cuber so please help me
@maxding1381
@maxding1381 8 жыл бұрын
traxxas 50k for the core, cheap and effective
@shashankchavali5882
@shashankchavali5882 9 жыл бұрын
Where do u get these stickers from
@hanishshkr
@hanishshkr 10 жыл бұрын
Do you need some kind of lube or just use any? Im new to speedcubing so help?
@cubeologist42
@cubeologist42 10 жыл бұрын
hanishshkr it is best to use a heavier lube for the core and hardware (screws and such) but you can use whatever you like on the pieces. It is all determined by how you like your puzzles to feel.
@hanishshkr
@hanishshkr 10 жыл бұрын
Cubeologist Thanks!
@francois-xavierlesaint2055
@francois-xavierlesaint2055 10 жыл бұрын
hi, can you do the same video for the 2 by 2 (dayan) thank you
@cubeologist42
@cubeologist42 10 жыл бұрын
Francois xavier Le saint I will get on a 2x2 set-up video as soon as I can. Thanks for the suggestion.
@kiranmhatre1893
@kiranmhatre1893 9 жыл бұрын
Hey can I use just Maru lube for everything u did from core to everything else? I just don't have that another lube and I don't have any idea about it. plz reply I wanna know
@rehbermoin5443
@rehbermoin5443 9 жыл бұрын
see if u use maru lube for the core the spring noise will not go but if u use for the pieces it will work nicely
@kiranmhatre1893
@kiranmhatre1893 9 жыл бұрын
OK thanks
@kiranmhatre1893
@kiranmhatre1893 9 жыл бұрын
Then can u suggest any other lube?
@rehbermoin5443
@rehbermoin5443 9 жыл бұрын
wt 4 wt 5 lubix maru axis oil
@kiranmhatre1893
@kiranmhatre1893 9 жыл бұрын
+X Cuber but where will I get it?
@themoderngamer285
@themoderngamer285 9 жыл бұрын
I have a question does this method work with a Aolong v2? and would using weight 3 lube be good idea
@SKGThePuzzler
@SKGThePuzzler 9 жыл бұрын
Yes and yes.
@themoderngamer285
@themoderngamer285 9 жыл бұрын
dude thanks i appcreciate your help :)
@SKGThePuzzler
@SKGThePuzzler 9 жыл бұрын
No problem! I only had weight 3 and I lubed it on my v2 yesterday, and it turned out amazing, still need to do another 50 solves before its broken in. How did yours turn out? Shadow King
@themoderngamer285
@themoderngamer285 9 жыл бұрын
Its Amazing when I did it it instantly became my main it got me my PB of 15.37
@dongachawngthu2443
@dongachawngthu2443 9 жыл бұрын
will maru lube alone work on Moyu hualong??
@vinayaksaubhri6606
@vinayaksaubhri6606 9 жыл бұрын
can use maru lube to lubricate the core. plz help me with this
@tonyhua47485
@tonyhua47485 9 жыл бұрын
Can I use weight 3 for this? I don't have any weight 4 or 5 at the moment
@manuelrojas9547
@manuelrojas9547 9 жыл бұрын
use the 3 only for pieces NOT for the core
@manuelrojas9547
@manuelrojas9547 9 жыл бұрын
use the 3 only for pieces NOT for the core
@DanyalShams99
@DanyalShams99 9 жыл бұрын
Manuel Rojas Campos can you please explain why?
@manuelrojas9547
@manuelrojas9547 9 жыл бұрын
Because your cube will have an springy sound, and the 5 is only for reducing the friction.
@CreeperDude957
@CreeperDude957 9 жыл бұрын
Would lubix work for the v2?
@asdfcuber5175
@asdfcuber5175 8 жыл бұрын
We're can I get a aolong v1? Can someone tell me were to find one. ( I don't want an aolong v2 I want an aolong v1 )
@mealy3167
@mealy3167 10 жыл бұрын
Can i use the crc silicone spray
@marknicol9405
@marknicol9405 10 жыл бұрын
Where did you order your stickers from?
@biscuitcubed2804
@biscuitcubed2804 9 жыл бұрын
Mark Nicol most likely thecubicle.us
@carldeguzman4199
@carldeguzman4199 9 жыл бұрын
What is the best weight combination of the hardware and pieces? Example: Hardware- Weight5 Pieces- Weight 3 Please answer i appreciate it
@rodrigorodrigues8793
@rodrigorodrigues8793 9 жыл бұрын
+Carl De Guzman hardware: 4 or 5; pieces: 2 or 1. thats what i use
@carldeguzman4199
@carldeguzman4199 9 жыл бұрын
+rodrigo lima rodrigues thanks i will use hardware 4 pieces 2
@samdeluna6674
@samdeluna6674 9 жыл бұрын
can i use petrolium jely? .... please inform me as soon as possible
@cubestric4568
@cubestric4568 9 жыл бұрын
No you cannot,I would go toTheCubicle.Us and get the lube you want.
@jeffthegoose2455
@jeffthegoose2455 9 жыл бұрын
+Cubing could I use traxxas 50k for all of the lube
@cubestric4568
@cubestric4568 9 жыл бұрын
+FishingForFish No,you should use Traxxas 50k for the core because the lube has to stay in the core...heavy lube is harder to disperse then lighter lube. Use Cubicle Silicone Lube weight 1or 2 for the pieces and Traxxas 50k for the core.
@samdeluna6674
@samdeluna6674 8 жыл бұрын
+Cubing i dont not have the money to buy those stuff
@cubestric4568
@cubestric4568 8 жыл бұрын
Sam de Luna Hmm...maybe you can ask your parents if you can do anything for them to earn some cash...the lube is only $3.89
@murules185
@murules185 10 жыл бұрын
I think the Aolong is competition ready out of the box pre-lubed.
@dylib2650
@dylib2650 9 жыл бұрын
The factory lube isn't that good
@terriblecuber5364
@terriblecuber5364 8 жыл бұрын
Please Respond, would this method be good for a thunderclap? I'm gonna break it in with around 100-200 solves and then lube it.
@trisfairy
@trisfairy 9 жыл бұрын
so lets say that i accidentally lost the tiny washer... is it okay for it to be without the washer
@grantc.7838
@grantc.7838 9 жыл бұрын
Tristan Yun It's just going to make a metric f*ckton of spring noise.
@Minecraftdude60
@Minecraftdude60 9 жыл бұрын
Tristan Yun It okay but the lifespan is gonna get cut short.
@InBoardCandy
@InBoardCandy 7 жыл бұрын
Will this work for the gans 356 air?
@ChrisCuber123
@ChrisCuber123 10 жыл бұрын
That diamond file is the one from TheCubicle. I have one of those myself.
How to Lube and Tension a MoYu Pyraminx
11:10
Cubeologist
Рет қаралды 41 М.
Bringing an AoLong V1 Back From the Dead
6:01
Cubeologist
Рет қаралды 40 М.
Who is More Stupid? #tiktok #sigmagirl #funny
0:27
CRAZY GREAPA
Рет қаралды 10 МЛН
Speedcubing Finger Tricks You Need to Know! + Slomo Examples
16:26
Cube Maintenance
8:53
Cubeologist
Рет қаралды 36 М.
Complete Lube Comparison [TheCubicle.us]
9:09
ParadoxCubing
Рет қаралды 139 М.
BEST Way to Lube your Cube with Lubix! (syringe)
15:37
ParadoxCubing
Рет қаралды 106 М.
Rubik's cube example solves (white cross)
9:14
Feliks Zemdegs
Рет қаралды 1 МЛН
MoYu GTS3 M | A Close Look
6:02
Cubeologist
Рет қаралды 71 М.
How To Easily Lubricate Your Puzzles: Cube Ed #2
9:13
JRCuber
Рет қаралды 266 М.
Easy PLL Skip Cases for OLL
6:00
cyotheking
Рет қаралды 512 М.
How To Assemble And Lubricate A DIY Dayan Zhanchi
20:43
CrazyBadCuber
Рет қаралды 391 М.