How to make a 12v “Paver Sealing” Setup! Make MORE 💰💰💰 in less time! Forget that Pump Sprayer!

Thank you for watching everyone! Below are a few links & parts needed for the build. Please SUBSCRIBE & LIKE the video! Happy Sealing! 🙏
Everflo EF1000-BOX 12V Diaphragm Pump Hose Barb, 1.0 GPM, 3/8" Npt Port a.co/d/6pVsltu
Power Wheel Adapter Battery Adapter for Dewalt 18v-20V Battery Dock Power Connector 14 AWG Robot Power Convertor for DIY Ride On Truck, RC Toys and Work Lights Replacement for DCB205 DCB204 a.co/d/ikVsuhk
Flexzilla Air Hose, 3/8 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3825YW2 a.co/d/iFjFG2m
ADDITIONAL PARTS:
Wire Twist (Home Depot)
Electrical Tape (Home Depot or Lowes)
1/2 inch Bulkhead w\Washer (Home Depot)
3/8 x 1/2 inch Elbow Hose Barb (Home Depot)
3/8 x 1/2 inch Hose Barb Adapter (Home Depot)
3/8 Hose Clamps (Home Depot)
Thread Tape (Home Depot)
3/4 x 1/2 inch Bushing (Lowes)
1/2 x 3/8 inch Bushing (Lowes)
Sealant Syphon Filter (Pressure Washing Store)
3/8 inch Inlet hose adapter (Pressure Washing Store)

[@herbduclos5599]

Hello great video, I just built my sprayer and everything was okay until it came to the priming because I noticed that it isn't pulling water. Any advice?

[@160waldo]

You should talk a little faster

[@SuperBojah]

Just curious, why not a battery backpack sprayer

[@jamesl.3030]

Sir..(thank you!)..."when a sealing job is done..what do u do with the sealer "remaing" in the 3/8x25 ' line"?...jus curious and thx again

[@originalshinemobiledetailing_]

*Can i use a 5.5gpm everflow pump n use a 55 barrel drum instead??Your setup Is ROCKING!!!*

[@autohog]

Awesome, thx. What is that angled nozzle that you are using?

[@josemalave140]

Wooow slow down with the talking my mind can’t keep up

[@erikservices]

How much to make me one

[@lifewithblucifer]

Where is that wamd from or where do i find one similiar? Thanks

[@joshtreurnich5159]

You need a step down converter my dude. Your running a 12v pump with with an 20v battery. This will degrade the life of the pump drastically.

[@FloridaXtremePw]

Done over 20 jobs so far with this setup here. Never had any issues. You take care of your equipment, properly clean, etc.. It will last. Thanks for the comment! 🙏

[@joshtreurnich5159]

@@FloridaXtremePw i dont doubt it works but thats not what im saying, electrically its not correct, got nothing to do with cleaning or taking care of anything my guy. Physics 101 thats all

[@FloridaXtremePw]

You’re more than welcome do build it as would like my brother. This has been working for me for a long time and never had an issue outside of the pump going bad after a while of use.

[@kimariokiji]

@@FloridaXtremePwHi, great video, thank you! The recommendation made about stepping down the voltage is good for the life of your battery and pump, but most of all it’s much healthier for you. The surplus energy is being discharged and can affect our bodies as radiation. So, if you use a step down converter, it maybe safer for you in the long term. There’s a Yt channel called Windheim EMF where they measure the electrical energy that’s being generated by all kinds of devices and machines and it’s eye opening to see how hat our bodies are exposed to on a daily basis. We normally don’t think about it but it’s happening regardless. 20V to 12V Step Down Converter Aadpter for Dewalt 20V Battery DC Voltage Regulator 15A MAX 180W Inverter Automatic Buck Converter Power Wheels Aadpter with Upgraded Low Voltage Protection and Switch a.co/d/ePVld2L

[@JourneyWithGenaro]

how do you clean it after done with sealing? does this work with any sealer /solvent based sealer? is the trigger going to get stuck open after first use?

[@JourneyWithGenaro]

I feel like solvent based sealers will dissolve that seal tape right away.

[@papitheprowindowcleaner]

thank you

[@jamesphilyaw3446]

Where can I get the wand?

[@siggyrides]

Between this video, your wand setup vid ,and your truck setup you gained a new subscriber. 🎉

[@FloridaXtremePw]

I appreciate it 🙏🙏🙏

[@drew5992]

Where did you get that bulkhead at? I can’t find it at my homedepot?

[@FloridaXtremePw]

See if another nearby store has it. If not, order it through their website.

[@EdwinRivera]

Hi why 1.0 gpm and not something higher?

[@FloridaXtremePw]

1GPM is the threshold, anything higher can overflow the pavers and also higher will you make waste more Sealant than needed. Which at the point, you are losing money.

[@bamf6765]

Nice job.

[@FloridaXtremePw]

Thank you! 🙏

[@jmleon92]

Hey brother, is the pump and the battery the same voltage?

[@FloridaXtremePw]

Yes, 12v.

[@jmleon92]

@@FloridaXtremePw isn't the battery 18v and the pump 12v?

[@FloridaXtremePw]

@@jmleon92 My apologies, the pump is 12v and I use a dewalt 20v for battery.

[@ramdeo1978]

@@FloridaXtremePw when you hooked up the battery wouldn’t it keep spraying without pulling the trigger on the handle ?

[@DIYCrasher]

@@ramdeo1978 I believe the pump has a pressure switch. Once it builds up pressure the pump stops so it won't continue to run. Then when pulling the trigger it releases the pressure and the pump will sense it and turn back on. It's like an RV/camper water pump to think of it that way.

[@bluelinepressure9953]

Thanks for the info 😎🦾🤘

[@FloridaXtremePw]

Anytime my brother! Get that 💵💵💵