When I made the family name trees, I did them in the metallic poster board and glitter card stock…I did a layer ‘mirrored’ so the back would look as good as the front…they look great on our tree!
@CharonAurand Жыл бұрын
I made these at the last minute for Christmas gifts. As a teacher, myself, I LOVE your instructional style and materials! Any time I get stuck, I just go back and watch your video again. On this project, I found that the written step-by-step directions mirroring the video led me to a solution for a roadblock I had hit. You are so thorough that I have learned from experience: the answer is always there if I look hard enough. By the way, EVERYONE LOVED THEM and they were all touched to receive something so personal. Many, many thanks!
@juliebooth58 Жыл бұрын
I'm bummed. Won't be able to watch tonight. Have an important meeting. Will watch replay. Thank you Jennifer and all your team for everything you do.
@kellypagan744 Жыл бұрын
These will be fun to make for each of my 15 grandchildren.😀
@1sinspect Жыл бұрын
Did this earlier today. The kids love it. I was actually thinking above doing something like this recently and your video got me there. Thank you! I made the family names tree and one ornament for my daughter with the bird. I used a scrap piece of junk mail to cut out the bird in red and glued it on the final layer. Looks awesome.
@jerridyke68 Жыл бұрын
Nothing better than a Jennifer tutorial! Thank you
@charlenejohnson6467 Жыл бұрын
Thank you so much for this one. I have just gone crazy making these for family members. I have to give my cricut a rest now. Thanks again, hope you and yours have a wonderful Christmas!!
@elizabethvallely4044 Жыл бұрын
Christmas Tree ornament is so cool love it! Love the name ornaments they are so cute! Than you for teaching how to make them its always appreciated!!! Hugs Liz 😊💕
@elliemcgettigan4366 Жыл бұрын
Jennifer, I can't tell you how much I love that you showed us how to make this design. I have made 4 trees this evening. I have a couple questions, is the Cricut Metallic Poster Board two sided and is it really heavier than metalllic cardstock? If it is not colored on both sides; do you glue a colored backing? Again, thank you for a great lesson! You are the most generous person!
@dawnbelke1978 Жыл бұрын
The ornament name tree is my favorite.❤
@scrappingrrl Жыл бұрын
Jennifer to the rescue once again! I love this.
@nancykost2472 Жыл бұрын
Thank you soooo much for your wonderful tutorials!! I am definitely making some of these ornaments! Happy Holidays!
@korinhubbert716316 күн бұрын
These are absolutely wonderful🙌this video is very informative and concise 💪thank you kindly for sharing! Wishing you and yours a wonderful 2024 holiday season🙏🎄🎊✨️!
@JenniferMaker15 күн бұрын
Thank you! Happy holidays to you and your family too!
@roxannepowers7757 Жыл бұрын
These are a must do on my list of many things to do.
@karenfunk853 Жыл бұрын
Thank you, Jennifer, for this awesome ornament! I made several today and will make more in time for Christmas for the kids and grandkids.
@JenniferMaker Жыл бұрын
Wonderful!
@diannaanderson6617 Жыл бұрын
Thanks again for doing the grunt work on this project to make it easier for us!
@karagiovingo5957 Жыл бұрын
These ornaments are cute
@suzimaggard7613 Жыл бұрын
Love the new font! Thank you for another great project.
@reneebanbury7066 Жыл бұрын
I hadn’t thought of something like this! So cool! Thanks Jennifer!
@debraengle2513 Жыл бұрын
Thank you for the new free font!!
@diannerobert3822 Жыл бұрын
Love these , already started one of them. Maybe will get one or two by tomorrow or the next day.🥰
@patiasmith Жыл бұрын
So very pretty! Love them!
@LindaYoung208 Жыл бұрын
Thank you for sharing. As always, love the designs and ideas
@mariea3771 Жыл бұрын
Another spectacular craft. Thank you.
@marleneowens1034 Жыл бұрын
I'm working on making the snowflakes from the other day.
@budoneof15 Жыл бұрын
Cute gift tags
@Tracylovescrafts Жыл бұрын
I can’t wait to try this.
@AmoniaPaulRolle Жыл бұрын
can you do this with glitter foam?
@twetter1 Жыл бұрын
Can you use wood and the maker 3 for this project?
@CarolHewett-g1c Жыл бұрын
Beautiful
@sheilamiller2331 Жыл бұрын
These ornaments are so neat.
@WendyRobinson-t8p Жыл бұрын
Im so exited to try making those Especially the Christmas tree of names
@Itzzmeevans Жыл бұрын
I love the Christmas tree of names so cool.
@reneedickerson4489 Жыл бұрын
❤❤❤❤ So cute.
@LindaYoung929 Жыл бұрын
Beautiful ❤️
@Peppertkd Жыл бұрын
Thanks again for another great ornament and tutorial.
@debraengle2513 Жыл бұрын
Oh these look much easier than your other ones. I will definitely try these !!
@bernadettesjones9142 Жыл бұрын
Im going to try his♥️
@rebeccalinke8101 Жыл бұрын
Gonna give this a try!
@kathylambert309 Жыл бұрын
Can't wait to try this! Love all!
@GeometryBasicswithMrs.Ca-zx2siАй бұрын
I can’t wait to make
@JenniferMakerАй бұрын
Yay!
@marybraunlich Жыл бұрын
@Jennifer Maker: Do you use the clips hold down the materials with your honeycomb panel in your laser machines? The actually fit into the honeycomb holes.
@lorichapman6232 Жыл бұрын
You didn't mention it but could you use any kind of light wood, using the maker. Thank you
@rickandnannettequalls5502 Жыл бұрын
You mentioned these could be made of wood or MDF. Can you recommend a source for MDG, and can they be cut with the Maker?
@beckyoyler5281 Жыл бұрын
Thank you for sharing this.
@jacquelinerodriguez9589 Жыл бұрын
Hi Jennifer can u also make these with the Cricut veneer ply wood on the Cricut machines is it possible for you to make a video using those type of wood from cricut to make these ornaments that would be gladly appreciated thank u
@02turbos18 күн бұрын
Hi Jennifer. I enjoy all of your videos. I have a question. Can you use this method to cut out ornaments using veneer? I would like to make wood ornaments to give to family this year.
@JenniferMaker17 күн бұрын
You can try it but the intricate cuts could be difficult.
@VioletHong-s7g11 ай бұрын
Is the JM block caps part of the subscription because I couldn't find the font?
@JenniferMaker11 ай бұрын
No, it's linked in the notes at the bottom of the tutorial 😊🌻
@CheriBorst Жыл бұрын
Jennifer, what is the diameter of the ornament? Would there be a reason not to size up if needed?
@JenniferMaker Жыл бұрын
You can increase the size in Design Space. 😊🌻
@CheriBorst Жыл бұрын
Thank you. 😊
@elliemcgettigan4366 Жыл бұрын
I sized up and it came out great for my son's family tree; as there is only three names.
@lucindazelna4351 Жыл бұрын
look delicate
@CrazyRedBug2 ай бұрын
I know this was made 10 months ago, but I wanted ask if you could make these from the thing craft foam or faux leather?
@JenniferMaker2 ай бұрын
Yes!
@deannemclaughlin7930 Жыл бұрын
Hello from Ontario Canada 👋
@JenniferMaker Жыл бұрын
Hello there!
@bonnieramirez286010 ай бұрын
Well that's good for people with cricuts
@candicebaker3080 Жыл бұрын
I love these. Where do you get the glue bottle with such a tiny hole so you put out less glue
@elliemcgettigan4366 Жыл бұрын
She is using Bearly Art Glue. It is on Amazon or their website. I believe that Jennifer has a link to this in her supply list.
@candicebaker3080 Жыл бұрын
@@elliemcgettigan4366 thank you so much and i subscribed to you as well. So very helpful. I need to get me some of that. Lol
@kathysharpe7185 Жыл бұрын
Do you think laminating these would make them last longer?
@JenniferMaker11 ай бұрын
Sure!
@erinwhateva2278 Жыл бұрын
Could these be layered with zots or foam dots? 😍
@JenniferMaker Жыл бұрын
I suppose you can do that. ♥️
@eieenwalcik951 Жыл бұрын
Cute!
@hollyt3184 Жыл бұрын
Thank you 😊
@JenniferMaker Жыл бұрын
You're welcome 😊
@lucindazelna4351 Жыл бұрын
Love it!!
@sharonsmithcambridge176 Жыл бұрын
Love these! ❤
@CharonAurand Жыл бұрын
I can't see the font on Cricut Fonts page under either System or Recent. When I downloaded the font, it shows up on my computer under User fonts, but not Computer fonts. Is that the problem and, if so, any suggestions how to overcome that problem?
@JenniferMaker Жыл бұрын
This may be helpful. jennifermaker.com/how-to-upload-fonts-to-cricut/
@donnacagle454 Жыл бұрын
Love these!!! What time will it start?
@JenniferMaker Жыл бұрын
7 pm
@tejoniquedell6556Ай бұрын
Hello can you make these use balsa wood?
@JenniferMakerАй бұрын
The veneer wood from Cricut might cut better.
@dicuzino1963 Жыл бұрын
Did you purposely name your animals so they fit in your crafts? Just kidding, they look wonderful. Is that ribbon in the black box? Thank you for sharing.
@claretasset Жыл бұрын
When I uploaded, the star hanger was filled in. Also the line under it is not filled in and disappears when I go to cut. I am very confused on the line and which one to save. My upload does not match the tutorial. Help please.
@corysoissong4119 Жыл бұрын
Mine too! I made a rectangle as a line currently. All the small pieces in the circles had to get deleted individually too. You can hide the circle in the star
@corysoissong4119 Жыл бұрын
But the circle didn't completely disappear off the star when I deleted the circle.....I don't know!😢😢😢
@corysoissong4119 Жыл бұрын
Figured it out! If you select the items all at once and hit slice, it will cut them out!! All the black fill pieces
@marilynlangley-ws8xx10 ай бұрын
I have a cat named Butterscotch!
@JenniferMaker10 ай бұрын
Aww, that awesome!
@dragonladyx3924 Жыл бұрын
How do you enter the monthly cricut giveaway?
@JenniferMaker Жыл бұрын
You can enter at jennifermaker.com/cricutgiveaway 😊🌻
@chrystalasel8733 Жыл бұрын
I do have a question what if they have more then 7 names
@lorenemalis1059 Жыл бұрын
Has anyone tried making the tree ornament smaller, or is that too hard/too detailed? It looks pretty big in the example.
@elliemcgettigan4366 Жыл бұрын
I did reduce one of mine down to just a bit or 1/2 inch. It came out fine.
@chrystalasel8733 Жыл бұрын
My sister's want me to make this for them
@brandithompson8070 Жыл бұрын
❤
@cynthialemons3394 Жыл бұрын
Dtf
@matthewlavergne56108 күн бұрын
It's good to see the WoodPrix has new instructions to save my money and energy to make it.