For those having trouble getting it to close by going up. change the first gearbox so it pushes the piston 2m instead of 1 as its final step. this fixed it for me. also using glue instead of linear chassis will prevent things from sticking to the floor and being dragged with it.
@jurkobaxy10983 ай бұрын
OMG YOU SAVED MY LIFE THX BRO :DDDD
@thundershockcaiden3 ай бұрын
for me it didnt work.
@ImBekker2 ай бұрын
If this does not work for you, here are possible problems and fixes 1.If you sped up the shafts, the place will break. It works perfectly on 16 rpm. If you do want to speed it up, you need to put the redstone contact further away, another option is to add more delay to the redstone repeater. 2.Do NOT spam the activation buttons before everything stops. If you press the button before the gantry shift finishes its way, it will break. To fix this, reset your sequenced gearshifts, gantry shift and piston. Hope this helps
@j-techaerialphotography63062 жыл бұрын
For anyone having issues and saying it doesn't work. Just tested on.1.18.2 forge. Java edition. I can guarantee you it does. HOWEVER, I also had issues until I really paid attention to the video. You HAVE to make sure that the red lights on all the sequenced gear boxes are off! These lights represent the stage that the sequence is in. I.E. if you have 4 steps. You will have 1 light for the first stage 2 lights for the secon. Etc... I paired mine with security crafts keypad block with a Redstone link on the side and it all works perfectly! If you want a video let me know.
@Zurgified2 жыл бұрын
what
@j-techaerialphotography63062 жыл бұрын
@@Zurgified while building it. He tested it multiple times. But after the test notice the video jump cuts and all the previously lit up sequenced gearboxes are completely dark again. He reset them before continuing the build. However he never stated this or showed it. For the Piston part you need to break the Redstone repeater leading into the Redstone contact Put a button on the sequenced gearbox and click it till the red lights go off again. On the gantry shaft assembly just attach a button to the sequenced gear box and click till its also completely dark. Then break both buttons and and place the Redstone links. The keypad block was the triggering mechanism I used to trigger the other Redstone links. I did this by using the security craft mod. Placing a keypad block and a Redstone link on the side as the signal transmitter and the corresponding Redstone links on both (or all three in my case as I have edited the build to also have a rising elevator) this also eliminates the need to press a button twice to get the mechanism moving. And before you say "you edited the build" I did so in a way that had no effect on the original design. I just simply added a non attached extra part.
@Zurgified2 жыл бұрын
@@j-techaerialphotography6306 alr thanks ill see if this worked!
@lohr3 Жыл бұрын
@@j-techaerialphotography6306 Can u help me on a call?
@sweetzy. Жыл бұрын
Can you do a video pllss i can't do it does'nt work
@binkosmith48073 жыл бұрын
Crank up the speed a ton and all of the sudden you have a trap.
@timersson55292 жыл бұрын
U know what would be funny a lifesteal smp create mod server
@Novahacksc2 жыл бұрын
@@timersson5529 should i make one?
@FantasticPotato-qb6xh Жыл бұрын
@@Novahacksc yup
@derhoellisch Жыл бұрын
Thx a lot! For a long time I wanted to create a huge hangar door for my spaceship underground base. And voila - it's there. Thanks to your tutorial. Great work. You have a new subscriber 😉
@dukebanana68853 жыл бұрын
Bro, I made this door alone just if pistons because I couldn't find a tutorial really proud of me
@theonlycube85382 жыл бұрын
I did as well
@oshiiram6792 Жыл бұрын
I've been following your video piece by piece and my gantry carriage just won't move anymore once it hits the other end of the shafts I've tried everything removing blocks around it and all but it just doesn't move help. Edit 1: Once i attach everything it stops moving on side of the 2nd sequenced gearshift Edit 2: If i put a block on top of the sticky chassis the carriage will only go back but not forth
@chimapansin2yt7533 жыл бұрын
Can you add like an Elevator going up so you can go down and up to the surface
@j-techaerialphotography63062 жыл бұрын
Sorry for the late reply, yes this can be done with.a vertical gearbox ,gantry carriage, gantry shafts, water wheel, wheel shaft, and a sequenced gearbox. Just make sure to offset the times and delays. Otherwise they will collide and break.
@jurkobaxy10986 ай бұрын
I tried to make it vertical but... It doesn't work can you pls make video about it?
@teckncal3 ай бұрын
This is old so i doubt ill get an answer. But can someone explain how exactly this works? I get the concept. But what im struggling to understand is why does the piston not instantly extend after the retraction? You hit the button to start it. From there it needs two redstone signals to retract. It gets one when the two contacts connect after pressing the button. And then it gets the second one from the button press?? So it should in theory trigger instantly as soon as you hit the button to retract it. Im glad it works but i cant use this principle to build other things if i don't understand how it works
@LeMB2682 ай бұрын
Yeah! I'm thinking on that too.Actually it's not closing due to that, and when I add three awaits, it still does not work! I don't know what's the logic of it.
@Funfactthisisahandle10 ай бұрын
can someone please help, it opens perfectly, but slides back across but doesnt go up to close.
@b-mustang4 ай бұрын
same
@shadowboyanddashdog55902 жыл бұрын
DUDE I JUST GOT THE TINKER MOD AND YOUR BUILD . . . THE DELAY ON THE GANTRY SHAFT SEQUENCED GEARSHIFT IS ONE SEC OFF ITS 3 NOT 2 I SUFFERED FOR SOOO LONG for like 10 minits
@ZoronPlays2 ай бұрын
I tried to make that but vertical it didn’t work so I just made something else and put a suspicious blue rock behind it
@nizzuisch-nizzoschmidt3 жыл бұрын
I really love Create content that I subscribe if there are lots of it! I just Subbed
@sfsclips62262 жыл бұрын
this channel is way underrated. +1 subscriber.
@bobbaandrup3 жыл бұрын
YOURE SO UNDERRATED, I subbed after 30 secs of watching a vid
@CreeperTNT_derEchte2 жыл бұрын
simp
@gerzsonjatekos31838 ай бұрын
It worked, but I had to make several edits like adding a delay so the hatch goes up and also adding more delay to the gantry gearbox otherwise it glitches
@Gryffender8 ай бұрын
Hey, Could you explain to me where you added the different delays? My hatch does not always go down, sometimes it does not go up, only the translation is done correctly each time. Thanks
@kavana1242 жыл бұрын
I've tried clicking the gearshift but it wont let me access it can someone help?
@galaxygamer8310 Жыл бұрын
try clicking it with an open hand
@mrjasiqi Жыл бұрын
This build is awesome but when the door comes back to the normal position it doesn’t go back up cause the piston doesn’t. What am I doing wrong?
@arkinbrucecuenca9019 Жыл бұрын
add an extra tick to the repeater sry if this is late
@theblockybanana55373 жыл бұрын
Very Smart! Improved and slightly modified door of what kyee made, new subscriber!
@nickfurr21222 Жыл бұрын
when it slides under a block it picks it up and drags it back which is really anoying please help
@lexeychik Жыл бұрын
For some reason, it just stops working if it going forward or down
@Spexo3 жыл бұрын
Most underrated redstone youtuber
@skylanmcghie4684 Жыл бұрын
Merry Christmas everyone!!
@pasarograndfe3 жыл бұрын
not working, when i press the button with all finalized the redstone contact fucks with the sequenced gearshift
@Kumergence2 жыл бұрын
you might have done something wrong or your version of create mod is different.
@mohdqrazali85872 жыл бұрын
Best tutorial for any peole like this mod
@doodlebobert6295 Жыл бұрын
i got the door to work but i ran into a problem. When ever the floor goes back into position, it takes the blocks above the door. Not the blocks on the Linear Chassis, the blocks on top of those blocks. Does anyone know why that is and what to do?
@DemonGlitch029 Жыл бұрын
Its actually the chassis, because you need to use a wrench and hold Ctrl, then look at the chassis, until you see the number 8, then scroll down till one.
@Symura602 жыл бұрын
the redstone conect or turn off and block wont update ruining the whole thing for me T_T
@TheRealKindcod3 жыл бұрын
Now time to make a pop out base
@NovyJones2 жыл бұрын
I tried to do this maybe 6/7 times man …there s something wrong, not all times I press the button the piston goes down and not all times goes up..really..I made it identical to your one…where it's supposed to be wrong? Thanks
@ToonRilla Жыл бұрын
same
@rosethemaidkitty30792 жыл бұрын
could you give us an example on how to do the door again but when it's supposed to go two down, i've tried to do it myself but it never goes back up by two, only one
@j-techaerialphotography63062 жыл бұрын
I can help with that! I.M. me your discord
@rosethemaidkitty30792 жыл бұрын
@@j-techaerialphotography6306 ffff sorry, i ended up loosing the world otherwise i would love to
@prahlad72103 жыл бұрын
nice video:)
@aubepmadara81793 жыл бұрын
did you have facebook? i have more question for you i can't
@thomosevans3 жыл бұрын
Is this working on the newest update?
@carroton3 жыл бұрын
I have not tested it but I see no reason why it should not since it uses core mechanics.
@thomosevans3 жыл бұрын
@@carroton what do you mean core mechanics
@carroton3 жыл бұрын
@@thomosevans like how pistons work or what the timers do.
@RealDTSM3 жыл бұрын
@@carroton one thing i found out was that when i try to search for Gantry Shaft, it doesnt show. did they remove it or is that part of a separate Create mod?
@alfredlifvergren16163 жыл бұрын
@@RealDTSM you have to use latest update for gantry shaft and gantry carriages
@MatskuGaming3 жыл бұрын
Great video
@zuzoscorner Жыл бұрын
Ah how to make a Vault Door
@galaxygamer8310 Жыл бұрын
yo how do i change it from ticks to seconds
@solarflare20013 жыл бұрын
Awesome!
@comboconstricter26413 жыл бұрын
oof i got stuck at the piston
@noshyeohara2 жыл бұрын
sematic
@ArtemisWasHere3 жыл бұрын
You think of secret base doors, *im thinking of missile silos and hidden aircraft cannons*
@bobbaandrup3 жыл бұрын
Already made a couple of my own missile silo designs
@overloadware Жыл бұрын
it didn't go up and down for me
@Nxrthernjsbetta2 жыл бұрын
How to get the gantry shaft
@atharvgopaluni3 жыл бұрын
Big brain
@raku8643 жыл бұрын
for me gantry carriage doesn't go back
@carroton3 жыл бұрын
Make sure that you reverse the direction it rotates in when you want it to go back.
@alelele94342 жыл бұрын
perfect
@voidaeries610411 ай бұрын
Is this still work for 1.5.1?
@hooleyice3 жыл бұрын
so... it doesn't work. After it going back it not getting up UPD: It worked! I just forgot to place comporator :P It was working without him, but didn't getting up. And i inhale what comporator does, second signal UPD2: learn my words: DON'T. OPEN. THIS. NEAR. CREEPER. it got fucked my door
@oliverbecquart80483 жыл бұрын
smart
@crowbarjones21323 жыл бұрын
Finally a tutorial! thanks
@Novahacksc2 жыл бұрын
IT WONT GO BACK UP
@i_like_cold_coffee38673 жыл бұрын
i have to press the button like 4 times to make the gantry go inside nevermind i'm an idiot, i put in 2t for delay instead of 2s such an idiot i am XD
@galaxygamer8310 Жыл бұрын
it goes down but not across what do i do
@mattbeckley94837 ай бұрын
Mine goes across and not down
@Nono-yt3pt Жыл бұрын
It only works going down for me not back up
@spikeygamer40574 күн бұрын
same
@pandamonium92962 жыл бұрын
I did everything in the video and everything works at first but it won't go back to it's position, am i doing something wrong or is the tutorial outdated?
@Lunoxx_tm5 ай бұрын
if you have the problem, that its not going up again after closing it, you need to put it on 2m instead of 1
@ReflexionesPuntoCom2 жыл бұрын
didn't work, but it was fun to make
@ucanturp3 жыл бұрын
Merhaba, bu yorumu GOOGLE ÇEVİRİ'DEN ÇEVİRDİĞİNE İNANMAK İSTEMİYORUM :D
@user-uc4dy6il4t2 жыл бұрын
and how to make such that the door before opening leaves not down, but up?
@j-techaerialphotography63062 жыл бұрын
Just put the piston extensions you need and reverse the direction. Then make the surface you want flush the default position I.E. if you want it to elevate 14 but you have 16 Piston shafts, where it says Piston "ms #" replace the # minus two because your floor would be at 2 not 0.....I really hope that made since. If no just i.m. me and I can help over discord.
2 жыл бұрын
I had a lot of problems
@carroton2 жыл бұрын
This video is very old and so a lot of things have likely changed unfortunately