How to make a powerful magnet rotor for Your DIY projects

Super strong magnet bit.ly/35abM0K
Metal Glue bit.ly/35dNNOm
How to make a powerful magnet rotor for Your DIY projects
Related Videos
1. How to make DC motor at home , homemade electric motor easy
• How to make DC motor a...
2.How to create robotic at home , Homemade small robot 2017
• How to create robotic ...
3.How to make soldering iron using lighter
• How to make soldering ...
4.How to make scrill machine at home using spray can and small motor
• How to make scrill mac...
5.Homemade a small and fast car for kids
• Homemade a small and f...
6.How to make 220V solinoid engine at home
• How to make 220V solin...
7.How to make super transformer at home
• How to make super tran...
8.How to make foam cutter at home
• How to make foam cutte...
9.How to make mini grill stove at home
• How to make a mini gri...
10.Free energy device
• Free energy device new...
11.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
12.Motor as generator 2017, Homemade generator from DC motor
• Motor as generator 201...
13.Motor as generator , Homemade motor generator from old vcd player
• Motor as generator , H...
14.Motor as generator from small motor, Energy of small motor homemade 2017
• Motor as generator fro...
15. How to make scrill machine using 12V DC motor very easy , homemade scrill tool 2017
• How to make scrill mac...
16.V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
17.Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
18.How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
19.How to make Easy motor at home 2017
• How to make Easy motor...
20. Phone charging using small battery
• Phone charging using s...
21.Free energy , from small to a powerful energy, Phone charging using 1 5V AAA small battery
• Free energy , from sma...
22.How to make a powerful air pump at home very very strong
• How to make a powerful...
23.How to make 3V Battery from coopper wire
• How to make 3V Battery...
24.How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
25.How to make an Electricity Generator from old HDD motor
• How to make an Electri...
26.How to make a mini flashlight 5W
• How to make a mini fla...
27.Amazing life hack , Easy way to cut roof (Zn panel) using wire
• Video
28.My Electronic lock desk , new idea created in 2017
• My Electronic lock des...
29.Free Energy , Homemade Free Energy Device From Syringe And Water
• Free Energy , Homemad...
30.Free Energy , Free Energy from magnetic, magnet motor 2017
• Free Energy , Free Ene...
31.Free Energy , How to make solar cell from LED, LED Vs Solar cell, homemade 2017
• Free Energy , How to m...
32.Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
33.Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
34.Quad motor helicopter Vs Single motor helicopter, homemade mini helicopters
• Quad motor helicopter ...
35.How to make V2 water pump at home , new model of water pump 2017
• Video
36.How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
37.How to make a mini water pump at home very easy, Homemade 2017
• How to make a mini wat...
38.homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
39.ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
40.High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
41.Super motor , homemade easy motor 2017 , new idea to create motor
• Video
42.Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
43.Very small battery, how to make a small battery at home very easy
• Very small battery, ho...
44.Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
45.homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
46.Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video
47.Free energy, diode as solar cell, new idea to make solar cell 2017
• Free energy, diode as ...
48.How to make spot welding machine at home 2017
• How to make spot weldi...
49.Free energy , Transistor solar cell, how to make solar cell from transistor 2017
• Free energy , Transist...
50.Water turbine generator , not free energy , but just energy of water
• Water turbine generato...
51.How to make mini speakers using Beer cans
• Video
52.Lemons battery, how to make battery from lemons
• Lemons battery, how to...
53.Super DC motor, how to make DC motor very easy
• Video

[@iubs4production340]

इसी तरह रोचक विडियो बनाते रहे हमेशा धन्यवाद

[@pierredessage5530]

Vraiment merci beaucoup pour tout!!!.

[@lifefacts.8794]

Thanks for your help of expanding our awareness on this curious things

[@badtensioner]

your link to super strong magnet which is bangood.com does not have the curved magnets that you used. anyway, how did you bend them to the curve of your specs?

[@kamuranpeker132]

you must produce it privately in China

[@javasyndicate713]

Is it reverse polarity magnet, side by side?

[@bpark10001]

You need an iron ring inside the magnets. This will intensify the field outside.

[@Echo3_]

do you have a link for this I get what you mean but not sure where to put it.

[@bpark10001]

​@@Echo3_ The iron ring goes inside the magnets (against the inside poles). Magnetic flux forms closed paths. The more iron you have in that path, the higher the flux density. (Motor & generator performance is proportional to the SQUARE of flux density). The magnet is "flux pump", and the structure around it "flux plumbing". If you have a restriction anywhere in the plumbing loop, the flow (flux) is reduced. The airgap between the rotor and stator is unavoidable, but all others can be eliminated. For a cylinder construction, the axial length is constant. So the radial thickness sets the cross-section for the flux. Since flux capacity in iron is about double that in magnets, the minimum cross-section of the iron path should be at least 1/2 that of the magnet. For a pole structure where the flux divides in 2, the radial thickness of the iron cylinder the magnets are mounted on should be at least 1/4th the width of the pole. The iron behind the magnets (and that everywhere else) should be annealed AFTER MACHINING. Torching it to red heat and air cooling in still air should be enough. www.controleng.com/articles/understanding-permanent-magnet-motors/ In the illustrations, the purple (left) & light gray (right) is the iron center in the rotors For your construction, the "spool" piece should be either all steel, or a steel ring (radial thickness > pole width/4) over an aluminum center. The spool should not have any significant sides. These shunt off some of the flux from the magnet's edges. Make the flanges only 30 mils high. That way, you still get magnet centering, without shunting off significant flux. Your magnets are "packed tight". Flux from the edge of one magnet loops into the next one without looping through the stator coils. Most efficient use of the magnet is where there is gap 1/4th the pole width between magnets. You don't show the stator construction. The reason coils are set in slots is again, to reduce the air gap. This applies for slow-speed machines. For high-speed machines, the losses in the iron teeth get high, so a distributed, larger, airgap is better. Iron in the stator must be laminated. Problem is, unless you have a stamping factory at your disposal, fabricating slotted laminations is virtually impossible. It is better to steal stator iron from old small induction motor. For high-speed machine, another way to build is to have 2 iron disks with teardrop magnets, and the stator between, like a stack of pancakes. kzbin.info/www/bejne/eIXYdKaejZqVmZI You make 2 iron disks, and face these with magnets. Between is a thick circuit board with coils encapsulated inside it. Because all the iron parts are stationary relative to the magnetic flux, the iron eddy-current and hysteresis losses are reduced to insignificance. The flux density is lower than in slotted motor/generator, but that is made up by the increased speed (motor/generator performance is also proportional to the square of speed). If you run this rotor fast, don't rely on glue to hold the magnets on! Magnets are machanically weak. The plating will peel off. Machine a thin (0.020 inch thick) ring that slips over the magnets to bear the centrifugal force. It will have minimal effect on the flux because of its thinness.

[@jshaw4757]

Is it possible too speak too you for a bit off advice...cheers

[@clashcr6780]

I Will be right here waiting next project😉😁

[@carlosrodriguez9648]

Yeap! That equipment is expensive... 😗

[@shanealexander9952]

I have enjoyed your projects for years, but can you do one on how to make a lathe?

[@iseemobile]

How the heavy magnetting work?

[@georiashang1120]

Have you tried Axial motors?

[@davidbolha]

Aaah... the benefits of having a lathe machine. 🤔😌🙁😓

[@Nekuzir]

Lol take apart some old xbox controllers and use the motors from in there, connect them in just the right way with some batteries and BAM, you got a lathe, dremel, drill, fan, anything else that spins

[@varunentertainmentnetworks2670]

In an alternator, Magnetic rotor is rotated between 2 copper sheet, will it produce an AC which can be used in household or Will the the copper rotate due to rotating magnetic field or be stationary? Is it an alternator or AC Motor?

[@georiashang1120]

so the permanent magnets are opposite to each other with N-S pole,am I right?can you use halbach array to strengthen the mag-field,in order to somehow improve the efficiency?

[@OrcinusLaryngologist]

No such thing as a permanent magnet.

[@alanullmer8369]

You can take off more material per pass. Try .040 imperial with carbide insert on aluminum.025 on steel.

[@josephqaqish2598]

it is a beautiful and most efficiency rotor

[@johneparis]

Are the magnets placed N,S,N,S or are all magnets facing N, or All facing S?

[@bpark10001]

They alternate. For curved magnets, you must get 2 sets of them, half N inside, half N outside.

[@DIYPINOY]

Awesome video. 👆👆👆🤘🤘🤘

[@samirmajumder8633]

Thanks. U

[@r4v5t]

Are you sure about that polarity?

[@expertonnn]

Yes. He must to alternate the polarity of magnets, so I'm not sure how he did it, because magnets have polarity in concave and convex sides.

[@kamuranpeker132]

must be N, S, N, S....

[@lovepreetsinghgill517]

You have made my day

[@mickcarson8504]

I don't trust the way it has been built. At high rotation speeds, used as a motor the magnets can dislodge and come apart with drastic results. I would add a tight fit ring straps on each end to hold the magnets firmly in place, straps similar to wine barrels that hold the staves, or oak wool planks.

[@pereximepere8439]

Also de glue of the shaft would break

[@LFSIDIndonesiaOld]

Thats why we see bldc motor have the magnet attached to stator body, not on the rotor

[@1queijocas]

@@LFSIDIndonesiaOldthat is incorrect. The magnet is almost always attached to the rotor. It just happens that sometimes the rotor is outside and the stator is inside. attaching magnets to a inside rotor is a very common practice

[@jshaw4757]

Hello mate can I talk too you possibly for advice...thanks

[@Pedro_Araujo]

Muito bom! Parabéns!

[@BHARGAV_GAJJAR]

Can you try to make a video and spin this "rotor" ? Thanks

[@fewthings8917]

Aluminium is not good for dc motors it reduces the performance RPM of the motor

[@pereximepere8439]

Truth

[@brixbuenaventura5388]

Can i know the diameter of your metal case sir? Good work!

[@satyamverma8100]

Nice Tech

[@tannhan5290]

Can you tell me how to buy some magnets

[@jorgealmeida3453]

Very good , 👍👍👍

[@Aerox90]

Okey that's it... Honey, sell EVERYTHING! Sell the bicycles, our silverspoons, the sofa, lawn-mover, your parents... We NEED industrial machines! 😖 No, wait... 🤔 Keep the sofa! I love that one! 😊

[@katisotlelima4652]

i need your helpful finding the video that follows this one on how you used the rotor

[@murathoca7252]

kzbin.info/www/bejne/pYHUZ5ZjaZ1oaJosi=F2dyxQDkXVAzp7d3

[@tulsibauri8782]

Good job

[@horrorsilentpicture456]

Perfect fitting Magnet --> rotor Bearing Number 6202 ?

[@abdul-q-khan]

What size lathe machine did you buy and for how much and how long it took saving KZbin earnings?

[@esaucbuitrago5421]

Muy excelente rotor pero hizo falta mirarlo funcionando

[@chbaisla]

I love LATHE MACHINE

[@lordofshade]

dude, your fail point is the glue!!! you've built an strong structure for your rotor and all this is suported by GLUE??

[@josephmarsh8235]

You are too amazing with Inventions Mr American Tech

[@wingedbull1257]

fake

[@jhonquispeagreda7952]

El más CRACKK que he conocido

[@orsike192]

tell me the OP is a guitarist whitout telling me he is one

[@savneetsinghrairai6823]

The best thing is custom machine parts.......or from cnc laith

[@giampaolodisconzi7501]

Top brasil 🇧🇷👍👁

[@mmk4854]

Sir pls send magnets shopping link

[@pedrodediamante1145]

Hi man, the core is aluminiun? Can it be plastic? or not?

[@mickcarson8504]

Plastic is okay but hard nylon is even better. Aluminium and magnets don't mix well.

[@ajengmemberihadiah5612]

@@mickcarson8504 nice info brother

[@Saiful81]

What name this magnet🤔?

[@valentinfermus134]

👍👍👍👍♥️♥️

[@olarewajuibijola1549]

Please where can I download the fusion application

[@joejhihuryusuke4192]

In shop is bar magnet not curved magnet

[@skycollection]

You have to protect the magnets with a copper tube, those magnets are dangerous with the speed...! can you share the link for the magnets...?

[@sidamarali3030]

You'll find all shaoes and types on banggood.com.

[@bpark10001]

Don't use copper. Use THIN steel tube, 0.020" thick.

[@juanguillermopinedogarate2164]

Bien video mi amigo De que material es? Aluminio o acero?

[@wilsonaguilar02]

Y la polaridad de los imanes? Que configuración tiene?

[@paul57401]

Надо было бобинку из алюминия внутри поменьше сделать,нагреть и посадить охлаждкнием на вал. Удачи!!

[@subhashverma4287]

Mini power motor

[@AlphaCreativity001]

Your title spelling is wrong plz check it roter = motor

[@terrypowling]

No...the bit that rotates is called the ROTOR , the static coils is called the STATOR..

[@Ckwinstory]

Wonderful

[@sainiboyes]

Nice

[@Iamsteve314]

and where is copper wire?

[@korimmia9207]

Wow!

[@lengaming1651]

Make motor and generator in one in the next project

[@gowthamgowda9327]

Please make a video for permanent winde turbine... Please

[@Ckwinstory]

Thank

[@howto-bk8ev]

Centerfugal force will destroy the rotor

[@Brassmonger]

Can't get more than 100 W power as generator.

[@faisalbinhaid8049]

U r using curve magnets n the link given of plain rectangular magnets, dn't mislead ur sbscribers.

[@rattlesnake1999]

YOU HAFT TO HAVE NORTH AND SOUTH POLES TO MAKE THAT WORK YOU HAVE THEM ALL THE SAME AND YOUR ROTOR WILL SPIN ON THAT SHAFT IT'S TO LOOSE AND THE BARING FIT IS NOT GOOD EITHER.. "CLICK BAIT"

[@vishva8kumara]

1:43 I think this is not the suitable head for this.

[@ahmetdogrusozlu8929]

Selamünaleyküm

[@kamuranpeker132]

aleykümselam

[@tikhimirchi7713]

Do u have facebook profile ... please send me the link

[@mingshelngamba9822]

Music 🎶 - Name ?🙏 ( background )

[@lorriecarrel9962]

Shity

[@-slemantech6136]

👍🏻👍🏻👍🏻👍🏻👍🏻🌷

[@ГришаГапон-д5ц]

И так. Он берет стопку магнитов в которых верх один полюс, а низ - другой. Затем клеит их бок о бок. Пишет маркером на верхних сторонах (полюсы одинаковых знаков) разные полюса. Это просто п@здец. Я еще не видел, чтоб маркером можно было менять полюса магнитов на нужные полюса. Жесть.

[@АлексейКастевич]

У него две стопки магнитов, похоже что полюса действительно разные. Другое дело что он сердечник из алюминия выточил, а надо бы из стали...

[@Bey_have]

@@АлексейКастевич Я не заметил стальных сердечников в моторах с наружным ротором. Как вы это объясните?

[@АлексейКастевич]

@@Bey_have а материал самого ротора какой?

[@pidousuon2019]

Do you have online courses?

[@libaanmohamed1954]

How are you!

[@Benaamtv1]

Brother Make magnet motor

[@alchemy1]

How about the link is for block rectangular magnet and he is using curved magnets. And since he is can't speak, nor mentions it, can not tell if all of his magnets poles are alike facing out. And if his rotor is aluminum or some other shit. And how perfectly he had the specs to make the magnet's curved fit the rotor surface and just the right number of the magnets for it. People are just rude show offs, feeding the other just enough but not simple details of the whole knowledge. Rude as fuck

[@gamingisfun622]

Hello 👋🏻 Your title motor spelling is wrong . Correct it fast 💨 #Educationalcreativityfun

[@qiangchen4417]

Pawan Subedi It is not a motor. It is a rotor (the thing with 🧲 that spins,) not a motor.

[@kalpanadhadute6834]

🤣

[@subrat1591]

How to make a airplane with home made motor

[@unexpectedpigeon6654]

50 ads and a 10min vid of a guy doing an hour to super glue magnets. Pathetic channels

[@alisoninacio2501]

Bad music for yours videos

[@skhwibowo1785]

music fail not good 👿

[@БахытТургени]

ы

[@ahyyepthomi9359]

What is this yaar! 😞I guess you want to gain more dislike.

[@rajaramchandani5444]

Hhh

[@smoke_stackz3168]

Tangina galing mo ngayun ah