Рет қаралды 9,949
This is how I made a cheap shot put ring for under $100.
Materials (you can buy on Amazon or at local hardware store)
- 4x8 Plywood
- Jigsaw
- Liquid Nails
- Caulk Gun
- 1” Screws
- Drill
- Measuring Tape
Quick Tutorial
1. Buy Materials
2. Cut 1 Sheet of Plywood into 8 Segments Each 1 Foot Long
3. Cut Segments to make Toeboard Arc
4. Glue/Screw 6-7 Segments for Toeboard (depends on thickness of plywood)
5. Glue/Screw 1 Segment for Back of the Ring
Additional Suggestions
1. Buy Plywood with a Thickness of more than 1/2 inch, but less than 3/4 inch
2. Use 1 Inch Screws for First Layer of Toeboard, but 1.25 Inch Screws for Rest
3. Alternate Positions of Screws Every Layer
4. Sand All Edges of Plywood
5. Paint Toeboard
I had most of the tools already so it actually only cost me about $60.
Follow @throwrightfarhappens on instagram and twitter...
📸 / throwrightf. .
🐦 / throwright
#ShotPutRing #Cheap #Toeboard