HOW TO: MAKE PET TRAYS WITH CARVECO SOFTWARE TUTORIAL

[@MikeSmith-pc9nr]

What a cracking video, easily explained and informative. Now i feel more confident in making a bowl design, thank you 👍🏽

[@Hinkleshop]

Awesome glad I could help!

[@Mr.GucciClass1A]

Best tutorial of this kind I’ve come across thus far. Easy to understand, concise, and just straight up clear and to the point. Thank you!!!

[@Hinkleshop]

Thank you for watching and thank you for the kind words Hope it helps you!

[@CARGUY7LIFE]

Great tutorial, that was exactly what I needed to see to figure out what I was doing wrong. Great content sir keep it up.

[@Hinkleshop]

Thank you! Glad I was able to help

[@joemrstik6634]

Mr. Hinkle. I bought my CNC 8 months ago and keep coming back to your videos. Keep up the great tutorials, you make it simple and I keep wanting to experiment more and more after I watch what your pushing out. Its sure a learning curve, but watching your videos (pausing in many cases as I design) really helps me. Thanks again!!

[@Hinkleshop]

Thank you so much for the kind words Glad I’m helping you and I’ll do my best 👍👍❤️

[@clintonelliott340]

Thanks!

[@waynekozak3121]

I lol'd when you said little red square. Great tutorial.

[@Hinkleshop]

Thank you glad you enjoyed it

[@waynekozak3121]

​@@Hinkleshop was the endmill used an up or down cut

[@Hinkleshop]

Down cut to limit the tare out on the top edge

[@playamytrumpet]

Fantastic video, so informative for the person that’s new to CNC ing such as myself. I really like the” show all miss nothing “approach you have. Thank you

[@Hinkleshop]

Thank you!! So glad you enjoyed it!! FYI There are a few more tutorials on my channel if you are interested check them out 👍

[@HiddenHeightsFarm]

Great tutorial, thanks for sharing.

[@Hinkleshop]

Also I have been watching you guys for a long time y’all are doing and awesome job

[@HiddenHeightsFarm]

@@Hinkleshop thanks Vernon. We appreciate that. You just convinced me to purchase Carveco. Going to check out more of your videos.

[@Hinkleshop]

Awesome!!

[@BuckysCustoms]

Another master piece Vernon! Something seemingly difficult made super easy! Thank you for sharing!

[@Hinkleshop]

Very welcome sir! Glad you enjoyed it!!!

[@craigwesson1788]

Your my new favourite channel. Excellent tutorial, thanks for sharing your Carveco experience. 😊🇨🇦

[@Hinkleshop]

Thanks for watching glad you enjoyed it!

[@bcole295]

Off to the shop with another shot at it. Again thank you sir

[@Hinkleshop]

You’re welcome good luck!!

[@joshyingling]

Fantastic stuff, thank you so much. I just got my onefinity and didn't order a spindle because I thought it came with one....😅 so now I'm waiting on a pwncnc spindle and learning what I can to get started.

[@Hinkleshop]

Thanks for watching there are wo playlists on my channel for more info check them out if you're interested

[@wadetomczyk8043]

Just got Carveco nice tutorial thank you.

[@ZER0o10]

Subscribed great video!

[@Hinkleshop]

Thank you!

[@ShaneKennington-r2u]

Thank you so much for your video. I am just a few months with my Onefinity Elite using Carveco Maker Plus. I followed your video to the T but got lines from the bowl cut. What can I adjust to get a smoother face? Thanks!

[@Hinkleshop]

Thanks for watching Reduce the step over and or try a ball nose for the area clearance tool path with a close step over similar to a relief carve finish pass

[@ShaneKennington-r2u]

Thanks I will give that a try.@@Hinkleshop

[@Nissan300zxshowcar]

Excellent video! Thank you!

[@Hinkleshop]

You’re welcome glad you enjoyed it

[@derekmorris9230]

Great instructional. I'm researching what software to purchase next and carveco maker plus keeps calling me back...

[@Hinkleshop]

Thank you! Carveco is an awesome software I’m confident that you would be happy with it if that’s the software you chose

[@playamytrumpet]

Vernon, I mentioned before about your approach to sharing CNC info, I gave it a try and all went well until I changed the bit. It was my first time doing this and I ended up boring right through the bottom of the bowl. Because of bit length differences I had to reset zero and obviously that was my downfall, could you maybe do another vid not using pwn bit setter(I don’t have one) to explain the bit change and what needs to be done. Thx again for great videos

[@Hinkleshop]

Ken If you don’t have a bit setter or PWN CNC collars you need to separate the v bit and end mill files cut the end mill file first Then re-zero for your v bit z off of the top of the stock on the edge where you have original stock height hope this helps Thanks for watching

[@HortonRay]

I was wondering where you found those files for both dog faces to carve? We have a small pouch that looks exactly like the small one, kind of scary she looks so much like it. The larger one looks like my daughters, cane-corso, also referred to a small pony, :). I looked around and could not find either one. Thank you in advance, you do beautiful wood work. I watched you lazer the bear on the cherry yesterday,,, hoping you got it centered, and you did great!

[@Hinkleshop]

Thanks for watching I typically get on the internet and enter the type of dog and use free svg’s

[@Nissan300zxshowcar]

So I finally deceided to try this on my Longmill. Just curios, since I don't have a PWN collar as yet, do you start this job in the center, and if yes, how do you set up your initial placement of the xyz on your cnc? Thanks!

[@Hinkleshop]

Thanks for watching Set your point of origin in the center Use a piece of paper to set Z height Save the tool paths to separate files (That selection is on the bottom left of the save tool paths screen) Then complete each operation separately Re-zero your z height anywhere off of the stock that is the original thickness DON’T RE ZERO X OR Y Just the z Hope this helps

[@Nissan300zxshowcar]

aha! don't re zero X or Y, that what I needed to understand! Thanks so much for your time!@@Hinkleshop

[@Hinkleshop]

@Nissan300zxshowcar you’re very welcome just so you know there’s a playlist on my channel full of Carveco tutorials

[@Nissan300zxshowcar]

@@Hinkleshop Thank you so much! So if I use a 1/2" wide vbit for the carve, would I just bring it up to the side of the workpiece, x and y sides, then divide 1/2" by 2 (1/4" and subtract that to the measurement to get the x and y zero, yes? Confused about changing the bit type for the carve and getting to x and y zero without a touchplate... sorry for the confusion but really trying to complete a valentines day heart tray!!

[@Hinkleshop]

@Nissan300zxshowcar you should not have to re zero your x or y anytime after you begin any carve or change tools Just the z zero needs to be reset

[@Mr.GucciClass1A]

Would you share the specific link to the “Easy bit change” setup you mentioned? I’m curious to know what it is you are referring to, I may be Interested. I followed a link in the description but took me the general products page I wasn’t sure what I’m particular you meant. Thanks!

[@Hinkleshop]

I’m away from my home at the moment on vacation when I return I’ll investigate

[@Hinkleshop]

Ok I checked unfortunately I don’t have a direct link to the collars the only link I have is to PWN CNC pwncnc.com/?ref=D7STa4Rxeaj8P

[@BuckysCustoms]

I posted the link for you, Vernon!@@Hinkleshop

[@Hinkleshop]

Thanks Bucky!

[@Mr.GucciClass1A]

Thanks guys!! Enjoy your vacation! 👍🏽

[@markmyers9855]

Thank u very nice

[@Hinkleshop]

You’re welcome thank you!

[@sylviacook2005]

when i ad the 1 inch boarder is black how do i get it to white or just make my dog smaller in the square?

[@Hinkleshop]

First of all thanks for watching! The first time that happened to me it’s stumped me for a little bit as well However it is a simple fix undo your border basically remove it and we will make it again after we make the fix look in the bottom left corner of the screen you’ll find a black and white square approximately 1/4“ x 1/4 inch I would venture a guess that the black color is on the top. You will have to invert those two colors there is an arrow underneath those two boxes click the arrow to invert the colors so the white is on top and the black is on the bottom then remake your border hope this helps!

[@clintonelliott340]

Awesome, thank you 😀

[@Hinkleshop]

You’re very welcome thank you for watching and the super thanks you rock!

[@saintcharlesdesigngroup4419]

All you have to do is un-group the vectors, hold shift and click the outside vector to de-select it and then re-group.

[@D-GatDesignsLLC]

Nice video but you over complicated the part where you moved the outer boarder in order to regroup the inner vector. All you really needed to do is select the entire image, then hold selecte click the outer boarder to unselect it but leaves the other vector selected so you can regroup them. I only bring that up because the F9 function doesn't always work on my PC

[@Hinkleshop]

Thank you like I always say in the beginning of my videos there are many different ways to program the software and that proves my point thank you for sharing