How To Manual Swap an Automatic Car

[@adibannur1985]

Need more rotary content. Only Mazda RX-7 isn't rotary. Citröen GS birotor, NSU, Mazda Eunos Cosmo, the legendary 787B, motorcycles like Norton, Suzuki are also rotary. Need video about those.

[@KennyatHumble]

Did you miss the part that we're working on a Eunos Cosmo in this video?

[@mvmeee]

Let’s just pull a 787B out of our magically asses full of unicorns and glitter in the land of fucking make believe.

[@rolo88bars25]

Lmao fucking Savage ^^

[@thisisthomasjordan]

teach me how to rotary swap my motorcycle.

[@plopplop6805]

@@mvmeee this is a year old and I still FUCKING LOVE IT HAHA

[@Mamac2006]

almost fell out of my chair when he joked about using a flywheel jack😂👌💯

[@caveone-365]

LOL @ 6:23. People are definitely scared AF with the whole tranny jack BS. No reason to be worried about just letting that thing fly. Gave me a good laugh. Thank You! 👍🤣

[@corres78]

Your videos become better and better! Keep it up bro!

[@jacobtuley2573]

Dude you need a frame jack for your glasses

[@KennyatHumble]

tru

[@pexsi87]

Lmao

[@patrickjames6489]

deaddd

[@driffbro3380]

😂😂

[@mikeoakleaf8424]

Hey everyone, i am taking out my motor and automatic transmission as one. and also i am new to this but fairly good at the work. my question is this 2003 toyota Matrix 1.8 manual trans.can i just take trans off after i get the two out and swap too new motor? or do i have to swap flywheels also?

[@TKD187]

How hard would it be to swap a 07 Kia Rio 5 automatic transmission to a manual?

[@driffbro3380]

Why you have no lights in your garage

[@KennyatHumble]

ArmadiloBil We do but they are very dim. We have replacements ready just have not had time to put them up.

[@evilnyne]

Where’d he go?

[@rucarnuts13]

Why did you manual swap it? It's a GT Cruiser and it would have still been plenty epic with that automatic and a turbo 3-rotor! A JDM Grand National, as it were.

[@KennyatHumble]

The amount of money it costs to put a real auto behind it isn't worth the cost.

[@rucarnuts13]

ROTORS - Ahh. Okay, gotcha.

[@cooliebwoy415]

Dr. Weird that would've been an epic concept tho.

[@alexstromberg7696]

Maybe some people want to change their own gears, i'll never buy a auto and keep it auto. I'll just buy manuals instead.

[@1977meteor]

Drive a 20B powered car and you'll quickly realise it was too good to be mounted to a slush box.

[@antonjimmy5636]

Cosmo Automatic bellhousings are useful for putting Powerglides and Ford C4 autos behind other rotors. My friend has one in his Powerglide and 13B powered 8 second Starlet

[@KennyatHumble]

Anton Jimmy 20B, not 13B. 13B and FD autos are the same.

[@antonjimmy5636]

ROTORS my friend has a 20B auto bellhousing between his 13B and Powerglide. It also puts the starter motor in the engine bay rather than next to the trans, which helps with space.

[@kingpancho360]

have a question my brother closed my 12a engine before i got to finish my housings can i re-open the engine and use the water seal again. engine still in stand

[@KennyatHumble]

Rodolfo Lebron I depends on what water jackets you use. Some I wouldn’t trust after they’ve been crushed. Seals like Goopy are reusable. Best bet would be to check with the water jacket manufacturer.

[@kingpancho360]

Tnk u. For youe response

[@metalinvalidmatt]

Exedy Flywheel? I've got a ZF01 and that doesn't look like this one, I see this style appears as a 'Pettit racing' lightweight flywheel? strange, no doubt they do the same job and are similar prices, but a bit weird if it was advertised as a Exedy part

[@carlosflores828]

Were is the pilot Bering for the gear box

[@KennyatHumble]

It goes into the end of the eccentric shaft.

[@carlosflores828]

I didn't see u install it

[@KennyatHumble]

It was installed, you can see it at 10:30.

[@gav240z]

Is this a 13b Cosmo? I thought it was a 20b car?

[@rolo88bars25]

I'm guess 2 thing . 1- pilot bearing needs to be swapped out to FD pilot bushing , or possibly measure the inner diameter and match bearing to be pressed in 2- the pressure plate could be hitting the back side of the inner bell housing or throwout bearing wood release Fork is not set properly . & my last suggestion which I know you guys are professionals make sure the pilot bearing alignment tool is removed ik dum but never hurts too check lolz ..

[@KennyatHumble]

Every pilot bearing from 1974 RX7 to 2011 RX8 are the same. It's all lined up gonna be looking at it a little more tonight.

[@rolo88bars25]

ROTORS welp that just some fuckey then lolz...i would check to see if the throw out bearing is aligning with the pressure plate? I would also check to make sure the transmission tunnel is clear as well. Could be the simplest things?? I hate shit like this bro ... but definitely keep up the good work, I certainly appreciate it I don't really care about others people opinions I just want to see shit get done! .

[@KennyatHumble]

It's going to be something stupid. I just watched the video back and I dont know if I actually seated the throwout bearinga ll the way on the input shaft after cutting the camera.

[@rolo88bars25]

ROTORS possibly could be that .. I hope so , and and not the input shaft on the transmission actually being ben or slightly warped I've seen that on other applications

[@KennyatHumble]

Right, that's my current worst fear. The thing is, we could get the input shaft in, just it wouldn't click in all the way. It also wouldn't rotate the way we wanted it to either, worst case it is the input shaft, best case, it's the throwout bearing hitting the pressure plate.

[@blongsta5]

I need to manual swap my 240

[@_xvvvier_]

Whats needed to swap an auto 300zx to manual

[@BuffKon]

Manual transmission Clutch pedal Clutch lines Clutch Flywheel Slave cylinder Did all that on my 350z and its running perfectly!

[@BuffKon]

And if ur wondering how much. I spent around 2k

[@mikeyg8133]

@@BuffKon hey man doing this to my 350z soon wondering how you did the wiring?

[@BuffKon]

@@mikeyg8133 i didnt do that myself. I had somebody do it for me lol i ddnt wanna mess with the wiring

[@eskimojo5439]

My RX7 FC S5 is a automatic too and I need to swap 💙🤙🏽

[@eddychaosofpain244]

what about Chevrolet Cobalt SS Supercharged 2006 manual to automatic

[@giovannyvillalta7179]

The music is 👌

[@jahmariquammie4275]

U forgot the lock tight jack 😂😂😂😂😂

[@kylenmorrisseau3542]

This channels getting bigger

[@scottiefc]

i did not know you can use a automatic starter.. makes sense though

[@Dollsofgod]

12:27 If a transmission jack kills him it would obviously be because he didn't use a transmission jack jack to move it. But no seriously your content is entertaining already, please use safe work procedures as an example. Besides if you get hurt the content stops flowing. The content must flow!

[@Shreddiespaghetti]

You need a snapple apple jack bro

[@Gumardee_coins_and_banknotes]

Interesting, but it mostly went over my head.

[@dubbleA100]

the pettiness is live! hahahahahaha

[@TheSaint491]

Anyone wanna manual swap a alfa 4c?

[@thisisthomasjordan]

the transmission jack is gonna kill him cause he didn't use his transmission jack jack

[@The_Jake_Man]

@1:07 voice crack 😂

[@yourfather5324]

Jake Callahan tanks

[@manuelitodias9254]

haaa! I knew you guys going to be bought hurt hey dosing need a flywheel Jack what he definitely need is a step stool Jack four little shorty mechanic cannot even reach the flywheel housing you don't have one Snap-on has it the item number is 3 foot height short. probably you going to make another video saying you have one in the shop if you do maybe you should cuz maybe it's a possibility then the transmission would it fit if he have Rich maybe what you're saying was the pilot push bushing that's why transmission didn't want in I don't know but I want to keep watching to find out even know that guys even more interested the videos and also if you friend decide not to be a mechanic anymore and change trades I think he will be good a plus-size model just by the way he what's rocking those those pens what can I say the guy is a natural

[@CA1N1000]

bwwwaaahahaha

[@driffbro3380]

There's so much I have to learn for me before I can pick on a ricer

[@JohannesB5]

Dude get some new glases it bothers me that it's tilted I CAN'T STAND IT😂

[@amusingtree3484]

Forgot to clean the oil on the flywheel

[@yourfather5324]

Amusing Tree it will clean itself as you drive it, it just won’t function properly the first one or two hundred miles

[@iknowdeweybrudda6564]

Nebraska

[@shobud7561]

You need to chill out before you start talking , dude your talking a mile a minute. Slow the heck down so everybody can understand what you saying ! Very informative video though !

[@CA1N1000]

first

[@vikillerklownshadows7692]

second