How To Match Your Lure Weight To Your Rod Rating (To Maximize Casting)

Join us in the Insider Club to get up to 20% off all of the best tackle, plus our best fishing tips, regional reports, and in-depth courses. Click here to join today: bit.ly/3CvKIKN
Are you matching your lure weight with your inshore spinning rod rating?
If you're casting lures that are too heavy or too light for your fishing rod, you are likely affecting your performance on the water.
Rods are rated for a certain range of weight that can be casted so you want to make sure you are using lures that are in that range.
But don't forget about the hook's weight as well.
It's the weight of the lure plus the hook that should be accounted for.
So in this video, find out why this is so important to your casting ability!
Have any questions about matching up your lures with your spinning rods?
Let us know in the comments of our Fishing Tips blog on our website here: bit.ly/2VDSOAx

[@Saltstrong]

Calling ALL Inshore Anglers!!! Join us in the Insider Club to get up to 20% off all of the best tackle, plus our best fishing tips, regional reports, and in-depth courses. Click here to join today: bit.ly/3CvKIKN

[@Charsept]

As primarily a fly fisherman, I'm all too familiar with matching rod, reel, line, leader, fly. It's a matter of necessity when a balanced outfit is essential to even just casting. Now, because of that, I definitely check my spinning rods weight range when selecting lures. Although I will go a little heavier and haven't had anything break yet.

[@Arabian_Gulf_Angler]

When u say little heavier.. Is it like almost double the max recommended weight?

[@RandysMixtable]

Very helpful, exactly the information i needed. Thanks.

[@tylertyler6112]

Thank you for all you do

[@ronmb81]

Thanks for sharing this important info. I now write the weight of my soft plastic on the packets just for peace of mind..

[@ucvillaruz]

Thank you brother I got you

[@CombatArmsOwnah]

My question that I can't find too much info on, does the lure weight also apply to my max inline weight size when fishing with just a hook and nightcrawler setup? Been using a 1/2oz inline weight and just noticed the other day that my poll is only rated up to 1/4oz lures.

[@richardunderwood950]

I bought a bull bay banshee rod MH rated for 3/8-3/4 and like to throw the slam shady on a 3/16 jig head. Comes out to just under 3/8. Think it’s anything to really worry about?

[@Vypren]

We don't have bass in Germany but I want to get myself a nice bass combo at some point.

[@Saltstrong]

Thanks for sharing and we hope you get it soon!

[@speoky]

Hello, so I have a rod that has 10 - 30 grams and I have a 100g lure that I wanna use. But I'm not really sure if I can use it or not. Don't really wanna break my new rod

[@Saltstrong]

We have a massive library of fishing tips on our website along with a search feature to let you quickly filter down to find help you're looking for, so just go to www.saltstrong.com/ and use the Search feature in the top menu.

[@Arabian_Gulf_Angler]

I don't recommend this but if you had to do it.. Do it slowly and use like 30% of your normal casting force.

[@rd_0939]

This is very helpful. Unfortunately, im using the ufish 150 rod with lighter lures, now I learned that that's not a very smart idea. Any tips? I think I'll just stick up with it, it's alright. Also im definitely not a serious fisherman, i just like to be in nature

[@Saltstrong]

Glad it was helpful!

[@ShihabdeentheCyclist]

What about higher than recommended

[@macmobilestudio]

I know this video is older but my question is does the "lure weight" actually mean(bait casting) the weight of sinker PLUS bait in total. I.e.rod is rated for 3-8 oz.So I use a 5 oz sinker PLUS 1 oz of bait for a total of 6oz. I ask because I have friends that insist I am wrong.They would use an 8oz weight PLUS bait.I can see it in the lack of distance in there casting but I though I would ask a pro.Thx

[@Saltstrong]

Great question! Make sure to ask this over in the Community (www.saltstrong.com/) where the coaches spend their time.

[@danlalimar9369]

First time pier fishing, what kind of rod do I need to purchase? medium light, medium or medium heavy?

[@chrisjones720]

Medium Heavy all day bro , you’re fishing near structure so you want a rod with good backbone to pull fish out of structure

[@daytonsmith8910]

@@chrisjones720 why not get medium rod rated from 1/4-3/4 not to stiff for light lures still enough backbone for heavylures

[@chrisjones720]

@@daytonsmith8910 It all depends on the rod dimensions too their all different, I have a 7FT MH Tsunami Carbon shield II rod that’s rated for 1/4- 1oz so sometimes it just personal preference

[@daytonsmith8910]

@@chrisjones720 is a 7ft medium heavy baitcaster a good all around rod for bass fishing?

[@chrisjones720]

@@daytonsmith8910 Yes, but it also depends on what type of lures you’re throwing too, if you throw lipless or Crankbaits you want something with a more softer action because you’ll be pulling the hooks out of the fishes mouth. Usually with those type of lures moderate action rods work best.

[@kechikexplore3518]

Rod saya line weight 5lb - 10lb berat umpan 1/4 - 1/3oz berapa gram umpan joran saya? 😞 negara saya mengunakan gram bukan oz saya tidak paham oz,boleh encik tolong saya?

[@daveengstrom9250]

OK. So I understand the LURE weight as it relates to casting distance. But I don't understand the line weight issue. What does it matter if I use 10 pound line on a rod that says 4-8 pound line? (just an example) Is it just casting distance? I mostly use downriggers in very deep water (80-300 feet). I seldom cast anything.

[@Saltstrong]

Casting distance is severely lowered and if you do happen to high-stick the rod, then it has a higher chance of breaking.

[@n0spam911]

Does lure wight also determine how big fish can you pull out? Because some rods state lure weight and some have LB, like 20-30 LB

[@Saltstrong]

Hook size can impact fish size and getting a good hook set. Also, smaller hooks or lures might bend with bigger fish.

[@anamositykilla2190]

That's your line. 20 to 30 pound line.

[@n0spam911]

@Saltstrong so what does lure weight on the rod means?

[@briananderson8185]

So if I’m not casting, using more eight is not really a concern? ie. drop and drift fishing.

[@Saltstrong]

Probably not. However, check out the full blog on our website and leave your question there. That way, our team can respond directly with their recommendation. You can find it here: bit.ly/2VDSOAx

[@Sror3d]

Hmm is this only for lures or what about float rigs and such?

[@Saltstrong]

This is for anything that is getting casted out... float + swivel/hook + bait

[@gemarimancingTV]

Watching video 👍🙏👍❤️😀😘

[@Skatematey1312]

I have a 5-10kg rod what’s the best weight jig head for that

[@Saltstrong]

It will depend on the depth you want to fish. A heavier jig will sit lower in the water while a lighter one will be higher towards the surface.

[@robhildebrand142]

I’m assuming when fishing a popping cork you need to calculate the full weight of the cork and whatever you are fishing under it?

[@cespaia]

I guess so

[@Saltstrong]

Yes

[@jrviktorcsontos7261]

Is it a problem if my rod can hold 20grams but my lure is 25grams

[@Saltstrong]

Likely not, just be careful not to high-stick the rod and when casting

[@CRCFISHIN]

i have a shimano zodias and a shimano vanford 2500 with 10 pound braid its rated 1/8-7/16 i cant even cast a 1/8 lure past 50 feet. i think the rod is over rated

[@ronmb81]

I have the same set up only thing is I use 8lb and I can cast 1/8 further than 50 feet. I dont know if its because you are using 10lb, I mean the rod says 4-8lb..

[@nenadnedovic9246]

@@ronmb81 i have the same setup. Go the lighter braid and leader. The rods feels like its rated higher.

[@Arabian_Gulf_Angler]

Just use a thinner line.. And thank me later!

[@harrystrong6687]

mine doesnt have that tho

[@Saltstrong]

You don't have a rod rating? You may be able to search online to get that information.

[@MaxIQ77]

First

[@Hihahafookyasi]

I don't look at those numbers..I go by feel. You can tell when a lure is to heavy or light for your rod.

[@SaltySeaCaptain]

Yeah but the numbers are usually a correct range. If you don't know what the rod can handle yet its better to have an idea instead of wasting money.

[@Hihahafookyasi]

@@SaltySeaCaptain Sorry you missed the point. I'll try harder next time.

[@SaltySeaCaptain]

@@Hihahafookyasi You don't have a point, this is a tutorial for people who don't know dude. Obviously if you know what your rods can handle this video isn't for you. You're just being an elitist at this point.

[@Hihahafookyasi]

@@SaltySeaCaptain absolutely incorrect. The point is: if you are a first time angler start off with the numbers but do not fixate on them. Figure out what is best for you. All anglers have their unique preferences but the correct one is the one that works for you. Just trying to help. If you don't understand what someone is saying there is no reason to be rude. Tight lines.

[@SaltySeaCaptain]

@@Hihahafookyasi That wasn't your point at all dude, you're just bullshitting now. Your first comment was "I don't look at those numbers" but now you're saying beginners should look at those numbers? LOL. Just admit you made a stupid comment and move on.

[@Comrade_Akimov]

new world order: everyone uses metric

[@Nosfaratuu]

It's a superior method of measurement.

[@Saltstrong]

Thanks for the feedback!