How to mount amps in the front fairing of a 2014 - 2020 Street glide using plastic and factory holes

[@ernie9360]

Thanks for taking the time to make all these videos. You obviously do great work - too bad you’re not in my area!

[@jameswithrow86]

You are badass brotha! Too cool you are so active about everything bagger audio. Wish my shops around town would do half the things you do for your customers too. You mentioned you give a credit for the rockford 6x9 if you buy the kit and want different speakers. My shops give u the middle finger..

[@NVSAUDIO]

I try my best to help everyone. Thank you for the compliments.

[@P5ODIGYtensaistechtopics]

Can you show is one for mounting amps in an 08 down street /electra glide?

[@NVSAUDIO]

We get mostly newer bikes in the shop ( 2014 and newer ) The next 2013 and older we get in the bay I will do a complete video of the install .

[@jeromemiddleton1042]

Thanks, road glide turn

[@bobsvids5706]

I can't find a mention of why not just mount to metal bracket by drilling a couple holes if needed? It it to redirect heat from the radio? Thanks for the great content/info, RG

[@blankshooter65]

Nice video. You do very nice work. Can I ask why you add a piece of material to the amp tray when mounting amps? Is there an advantage other than a nice clean looking install? I've had 2 amps burn out an I was wondering if this material works as a heat barrier. I run a Sony ax5000 which I see you're not a fan of in my '14 street glide. when it dies I may look at the new HD replacement you reviewed. Until then I'll avoid the rain.

[@jayinmi3706]

Much better than the zipties used to hold 3 amps (seriously....seen it.) lol

[@loudstreetglide7606]

So professional thank you

[@angelvip2474]

Great explanation

[@ccarter7292]

Any recent for 2001 Electa Glides amp mounting?

[@valmilford1542]

What do you use to cover those amps from water if you get caught in the rain

[@NVSAUDIO]

facebook.com/309CustomAudio/photos/this-is-our-fairing-shroud-for-street-glide-this-is-a-water-resistant-material-a/849467705627721/

[@pastorwilburmedley1124]

Can you do one showing how to mount amps on the road glide fairing

[@NVSAUDIO]

Pastor Wilbur Medley I’ll do that one next week

[@pastorwilburmedley1124]

@@NVSAUDIO thank you I am trying to mount two amps in the fairing of my 2017 road glide special and want it to look professional. By the way you do great work keep it up!!! God bless

[@samuelcortes1471]

Hello I have a 2018 street glide radio it only had front speakers on it but I put some six by nines and the bags and I can't get the radio to show up for the fade for left and right or for the rear but the rear wire connections are there so it should be able to fade to the bank but how do I get my radio to fade to the back and left and right when it doesn't show it I know it has two cuz it has the rear wires there they're the blue ones and those were connected to the sick Vines so please if you can help me tell me how to get the radio to fade to the back I would greatly appreciate it thank you so much

[@NVSAUDIO]

You will need to send me the radio so I can flash it and activate the rear speakers

[@WesRyda]

Will two 2400.4 fit side by side? Or two cicada 2000.4?

[@NVSAUDIO]

No

[@dibblm]

good job

[@kendocken5149]

You sell those pkastic composite plastic brackets you made for 2020 street glide

[@NVSAUDIO]

What amps Are you using?

[@kendocken5149]

@@NVSAUDIO diamond audio 4V2 Sinister sound front 4 faring speaker system. I'm a little confused on wiring the pac sni-35. In how to wire/strip the rca's into stock molex connectors. When only I rca connects to pac sni-35. Whit to grey White/black to grey Brown wires?

[@kendocken5149]

@@NVSAUDIO thank you for your vids & response. Much appreciated.

[@boochieandhistruck8133]

How many speakers can those two amps push???

[@NVSAUDIO]

8

[@lyrikaladixxionstudio4824]

What size fuse do they need 40 or 80????

[@NVSAUDIO]

800.4 ? We run a 60 amp fuse

[@robertstephens9323]

Is 2013 different then what you are showing 🤔

[@NVSAUDIO]

Yes Here is a good one for 2013 And older www.ebay.com/itm/Batwing-large-amplifier-mounting-kit-Harley-Street-Glide-Diamond-micro-PN4-520D-/161709271392?_trksid=p2349624.m46890.l49292

[@Bottom2TopServices]

Is this 1/4 thick?

[@NVSAUDIO]

You can use 1/4 inch 3/8 inch or 1/2 inch

[@Bottom2TopServices]

@@NVSAUDIO what screw size to mount amp to the new bracket

[@NVSAUDIO]

@@Bottom2TopServices what amps are you using ?

[@Bottom2TopServices]

@@NVSAUDIO 800.4 not the evo the bigger one you showed at the end

[@limitlessworx5724]

Do u do any work on older bikes, not all of us are millionaire's

[@NVSAUDIO]

We get mostly newer bikes in the shop ( 2014 and newer ) The next 2013 and older we get in the bay I will do a complete video of the install .