How To Mount Your Thermal Scope | American Defense Manufacturing 30mm Recon

[@fowllab]

I am using this mount with my Pulsar Digex C50 on my 204. Have had it for a year and no issues. Purchased through Outdoor Legacy and as always they provide great Customer Service.

[@HansETX]

Thank you so much Rich!

[@GSDadd]

American Defense mounts are by far the best option I've found. Solid product!

[@HansETX]

Agree! That’s for watching

[@larryjohnson1966]

I bought the mount because I wanted to add a scope to one of my AR's and it was very easy to install the scope. It is a fine piece of equipment for a scope mount. It is solid, rugged, but does not add a lot of weight. It stays where you put it. Thank You so much for selling me the mount, and thanks for the instructions on how to mount the scope, so I will go back and make sure I did it right the first time.

[@HansETX]

Thank you so much Larry! I really appreciate it

[@ScorpioSin777]

What does the position of the thermal look like on the AR? How far back/forward does it go?

[@keithwray9942]

Thanks for the video. Looks like a sturdy mount…I’d love to see a field test of you shooting with this mount, and then removing the optic from the gun and reinstalling to prove it will hold zero…To me that would legitimize the real value if this mount. Thanks again for the great content!

[@HansETX]

Thanks Keith! That’s a good idea for a video

[@jasonuhl]

Looks like they come in different heights. What do you recommend for mounting a Thermion 2 XP50 LRF to an AR platform while keeping the objective as close to the rail as possible?

[@cdavis0145]

Thanks for the video. I just mounted my adder in an adm mount and it was super easy.

[@HansETX]

Glad it helped

[@bretbrown9488]

Gave you couple calls today finally got through and no adder ts50 in stock when are you expecting them?

[@HansETX]

We are hoping next week.. the ice storm kind of got shipping all messed up. Thank you Bret!

[@TheRussLee]

I'm hoping by the end of the month to buy my first thermal from you guys.

[@HansETX]

Thank you sir!

[@TheRussLee]

@@HansETX Hey thank you Hans for helping me on the phone this morning decide on a Adder 640

[@fabianvaras1273]

Hi there i got issue with one mounts i got 4 of them . The mount did not hold the cero everytime i unlock it and put back on is off for 2 moa at 100 meters so I move it the scope back to point of impact and is ok after that . Now i purchuse a thermal scope from you guys also with the mount . The idea was swiching scope when Im hunting you know . So how i can fix this problem ? I got 4 mouts but made think ok cold boar shot will be freaqing of for a mile . I dont know you guys maybe got a way to fix this . Is you can help out Ill be all glad to ear about it

[@davidram2500]

I use these mounts on my thermals but not the offset version because I use bolt actions. When I pack up my gear I always take my scope off and have had no problems dropping dogs over 200 yards. They always hold zero

[@HansETX]

Thanks for watching!

[@billforby8798]

If you’re scanning with the adder too how important is it to get it back in exactly the same spot on the picatinny rail? Will being more forward or backward throw zero off?

[@HansETX]

Yessir, it would help to be back in the same slots on the picatinny rail.

[@ThomasReynolds-v9l]

Can you tell me which model mount that is? and what hight mount do you recommend thanks

[@HansETX]

adm recon 30mm 👍🏻

[@rossmara8377]

I’d like to buy this, just worried about the throw clearance of the bolt on my Tikka T3x. Can you advise?

[@HansETX]

Unfortunately not exactly sure on that specific rifle

[@LeeH-Ranger83]

Hans, will this mount fit on a picatinny rail? Can I use this mount with a Pulsar Thermian Duo DXP 50/55?

[@HansETX]

Yes to both 👍🏻

[@jonnymiller3231]

Hans, Will the XQ50 Pro LRF and mount that you took of be forsale as a demo unit? Thanks!

[@HansETX]

Use this link to find any demos we have 👍🏻: outdoorlegacygear.com/collections/thanksgiving-2022

[@cainanhunt658]

Just received my duo dxp55 from y’all. Which mount is the one in the video you recommended? I see many options and a different offset.

[@HansETX]

Here you go Cainan:outdoorlegacygear.com/products/american-defense-mfg-ad-recon-30mm?variant=29059342139466

[@flatlinepredatoraddiction6511]

Do you not use the red vibra-tite?

[@HansETX]

I do not only because I am constantly remounting scopes

[@TheReal_JohnDoeSmith]

Use feeler gauges people. This will true up any multi piece mfg. micro flaws. Have a great day ahead!

[@HansETX]

Thank you sir!

[@ryanvantomme7063]

Pulsar says 22.1 in lbs and other gun people say 18 in lbs

[@HansETX]

20-22 is fine.. 18 might be right for some scopes but it seems low thermals

[@nunzionapoli6325]

Do you he use a torque wrench? 😂

[@garyadams7969]

These are not ideal for the new XQ50 when mounted on a bolt action rifle. These are designed for an ar platform.

[@HansETX]

Gary, I’m sorry that you are having trouble. This mount, however, worked on every xq50 that I’ve ever tested, including the newest model, and on all of my bolt guns. However, I do understand that some people are very particular about their setups. I will say, we have sold thousands of these mounts and I can’t think of anybody that called back to say that it wouldn’t work on their bolt action rifle… if you bought your mount from Outdoor Legacy give us a call and we’d be glad to assist you! Thanks!