Check out how to improve the Razer Viper Mini Lift-Off Distance (LOD) for the 3359 sensor. kzbin.info/www/bejne/bmjYiJeMg5tkb5I
@oldi1843 жыл бұрын
Thank you, I bought viper mini few days ago. Mouse is good but it feels too light to me. My previous mouse had almost 90 grams, this one is 30 grams lighter. Tbh I did not expected that. I have small round neodymium magnets 12x6 mm. Can I put 3 or 4 of those magnets inside the mouse to increase its weight to at least about 80 grams? If you could give your opinion? Thanks.
@felicityc Жыл бұрын
@@oldi184 imo light mice are better, that's why the trend has been towards light mice and hand control. the past 4 years or so. i know this is an old comment but it is relevant. you could probably put something heavy inside the casing and tape or hotglue it in. i am not sure why you though the 'mini' would weigh that much tho..... i have smol hands so i bought the mini for that reason i would just be careful about weight distribution and how the center of gravty may change since it will be a janky solution, but it would probably work, yeah
@EmotionalFelizNavidad11 ай бұрын
Can I desolder the the rgb lights?
@suswee_81892 ай бұрын
The white sticker DID NOT need to be removed. I don't recommend removing it now my mouse feels off. Don't be like me, don't remove the white stickers.
@Stixs123Ай бұрын
The… skates????? You seriously didn’t put skates on
@doreomi622Ай бұрын
BRO THOSE ARE THE SKATES
@d1haazeАй бұрын
Your meant to put them back on
@ruesxn4 жыл бұрын
thanks man, i wanted to paint it white to match my setup, i look forward to knowing it will contrast good when i build the setup, ty king
@Beardedbob4 жыл бұрын
Np, send some pics when you make it white.
@itstahno3 жыл бұрын
@@Beardedbob can you make a video on how to put it back together.
@Hello-uh5tt3 жыл бұрын
@@itstahno watch the video in reverse :D
@Nameless08032 жыл бұрын
It was really helpful because there are not many reference videos like this in Japan. Other Viper mini videos are also very helpful. Thanks to you, I will be able to make my own Viper mini. Thank you very much. (Translated using DeepL)
@amveeeee3 жыл бұрын
Sir do you have a video replacing viper mini's optical switches to mechanical switches? Is is posible to DIY if I got the tools needed? Thanks in advance
It is a different mechanism on the board so its not possible to do that
@CheeseGrater.3 жыл бұрын
Hey man. How are you doing. I cant seem to get my clips in while re installing any suggestions?
@Beardedbob3 жыл бұрын
you just have to keep working on it, they will eventually but they can be a pain.
@xerxesdacat10 ай бұрын
Thank you for posting this! My clickwheel got dirty and I could not figure out how to open this thing to clean it! Thank you for saving me $50! ❤
@tarokawaguchi41583 жыл бұрын
Thanks for this guide good sir! I was able to tear it down and clean my unresponsive left click. It's now working!
@Beardedbob3 жыл бұрын
Enjoy
@lanceanthonyraneses91922 жыл бұрын
Same, but in my case left switch is broken
@nicholin022 жыл бұрын
The new patent of hot-swappable switches for example like plugging a device into a wall outlet. (Thanks. Asus.) The contact pins should sandwich together if fit perfectly and worry free about any issues on the market. Maybe oxygen free ones? Same thing as it goes on mechanical keyboard switches too. Pins are very fragile and could break if shocked. Luckily they've made an optical switches to solve the issue of travel and clicking issues thus I don't know if any market would go beyond on this...
@felicityc Жыл бұрын
gosh this thing is really simple to get apart but it feels like a chore to even get it back together. unlike logi mice where its not too bad to make sure its all aligned, but there are a million screws
@vinayaksrivastav2328 Жыл бұрын
thank you for this, the mouse wheel of my viper mini was not working properly, now i know how to DISECT my mouse and clean the wheel 😄
@melon7592 Жыл бұрын
90% if the video was out of focus, cant see anything, at least keep the focus manually fixed in 1 position, instead of it going all over the place constantly
@bwavii60583 жыл бұрын
you are so useful when it comes to mouse modding
@Beardedbob3 жыл бұрын
Thank's Insert Something Random Here I appreciated the support
@nivekquy40753 жыл бұрын
I'm not an mouse engineer but does changing the mouse cable affect anything to the mouse performance ? ( sure if I replace it with a better, lighter one but does it still function the same way before ? )
@Beardedbob3 жыл бұрын
swapping the cable just makes it more flexible or stiffer depending what you do.
@user-dz5kx3uv3o4 жыл бұрын
Hey bob, which screwdriver/set do you use? i cant seem to be able to remove mine on the logitech g303
@Beardedbob4 жыл бұрын
I use a stanley PH0050
@evqn52374 жыл бұрын
Your existence is very important to pc master race. Love you man
@Beardedbob4 жыл бұрын
we shall together dominate the master PC Race
@siddheshkadam50874 жыл бұрын
Hello, love you videos! Just wanted to know if these optical switches can be replaced with mechanical(Kailh/Omron) if needed? If yes, can you make a video on that if possible .. :)
@Beardedbob4 жыл бұрын
Hey, glad you like the content. No they can't be swapped with mechanical
@siddheshkadam50874 жыл бұрын
Hope replacement optical switches will come out from various companies...
@Terra1012 жыл бұрын
@@siddheshkadam5087 I think they feel great for opticals luckily, or what do you say, did you buy the mouse?
@roelsmasterpiece99864 жыл бұрын
Awesome vid. My razer viper mini has some issues on the scroll button. While clicking it there are times it doesn't register. Do you think I can fix it or replace it?
@Beardedbob4 жыл бұрын
I would RMA it, failing that you can swap the scroll Switch out
@AmerikkkaGuitars Жыл бұрын
Thanks, was able to swap V2 opticals in. Big difference!
@ucrain4971 Жыл бұрын
how do i find switches to swap into the viper mini?
@AmerikkkaGuitars Жыл бұрын
@@ucrain4971 eBay and aliexpress, or you can pull them from another razer mouse. It's definitely worth it. The V2 switches are grayish and v1 are darker.
@ucrain4971 Жыл бұрын
@@AmerikkkaGuitars will keep this in mind, thanks
@deadnest_ Жыл бұрын
thank you, finnaly got to clean the mouse
@Beardedbob Жыл бұрын
Its like a new mouse :-p
@deadnest_ Жыл бұрын
@@Beardedbob fr
@jtechmkb2 жыл бұрын
Hey man, do you have a fix for the scroll wheel click issue? Mine is not working but the scroll up and down works just fine. Thanks Beardedbob! hope to hear from you. :)
@MrXucurro Жыл бұрын
Same here, any fix?
@khl24454 ай бұрын
did you forget to weigh the pcb? i wanted to see that so badly
@erfanyousefabadi2 жыл бұрын
yo, nice vid!! is that possible to put our old skates back on the mouse? my back RGB is Sunken into the mouse should I completely open the mouse or what pls answer!
@agneeshwar_ Жыл бұрын
is it okay to permanently remove the black film covering the sensor and the led inside the mouse that you demonstrated at 4:02?
@Key-xl9py10 ай бұрын
He removed it in a weight reduction video for the viper mini.
@satchelpower4782 Жыл бұрын
thx bro, i just poured some milk on my mouse and it went in and my cursor was going up left side of the screen, with this video i was able to open my mouse and scratch every tiny parts of steel touched with milk and my mouse is now working good again
@GonzoGaming223 жыл бұрын
I wonder if it’s possible to put bigger razer viper sensor in the mini ? Would it be possible?
@choojunwyng80282 жыл бұрын
Should I mod my mouse because its more affordable to fix/upgrade, or just as a hobby? Seems quite niche but cool and interesting
@felicityc Жыл бұрын
hobby. warranties cover almost every issue. though they have become much more strict about them over the past 2 years or so since we were hard abusing them. I got 2 free g pro wirelesses just saying mine were busted and they don't ask for a broken mouse back, i think they do now though I started doing it because I wanted a lighter mouse for competitive shooters, not val or csgo, OW mainly, where much faster sens is used on even the csgo-like heroes. also, to clean your godam mouse, it gets GROSS in there was not expecting how bad mine was
@CyberPsychGaming2 ай бұрын
@Beardedbob What is the plastic stick thing you use to remove the skates and label called?
@dexterlallo3972 жыл бұрын
I appreciate the videos lately, but can you tell me the specific middle mouse button being used or atleast what alternative that i can replace it too
@MrGlitchDogePE3 жыл бұрын
What should I do in case my DPI button is loose/rattly?
@Beardedbob3 жыл бұрын
not much on this one as its phatic riveted in. That might have broken so you might need to RMA or glue it
@xZOMBIExx4 жыл бұрын
hey bob. I have a problem with mine. Maybe u heard a fix for this or know something about it. right mouse button has like a squeak whenever i press it (and a awful tactile feedback). any idea how i could fix that. or what is causing it in the first place so i know where to sand down some plastic
@Beardedbob4 жыл бұрын
seems common, there are two options RMA or you could add a little keyboard switch lube
@xZOMBIExx4 жыл бұрын
@@Beardedbob rma from aliexpress.. kinda unrealistic.. will try to lube the stems maybe . ty man !
@leyy15123 жыл бұрын
@@Beardedbob uhm where do i put the lubes sir?
@1guy0clue792 жыл бұрын
Do you think its possible to "unglue" the glued parts without damaging the mouse, and reassembling it the same way (possibly glueing it back) ? I've had issues removing them while painting the mouse. So i had to leave everything in and tape everything off quite tidiously. The Result was also not the Best because of it and im thinking about redoing it. I'd be glad if you'd help me on this one. Also, nice content!
@Roman94412 жыл бұрын
I want to buy this mouse and wonder how hard to replace those switch, Thank you for video
@tteitei Жыл бұрын
Hi, I have a viper mini which has a faulty optical movement sensor LED. Do you know what the LED used for the optical sensor is? I would like to see if I can replace it. it's the one which is facing the plastic lens/ prism. Thanks.
@baohoang51973 ай бұрын
hey, I also have the same problem, i wonder if you have any updates?
@Stevenbustamento3 жыл бұрын
So... Im thinking... Do you think it possible to take the chip, or individual components and frankenstein them with a different mouses body?
@Beardedbob3 жыл бұрын
I've not tried as im sure you will need to alter the firmware if say you swapped the sensor. I've loads of videos though replacing switches, encoders etc if that is what you want
@Rick-wy5mn Жыл бұрын
This was very helpful for me today, as my middle mouse button didn't work. 🎉
@tacituskilgore80 Жыл бұрын
Did you fix it? How?
@Rick-wy5mn Жыл бұрын
@@tacituskilgore80 I fixed it thank you, the small button that makes the clicking sound was stuck, so I just took out the mouse wheel and cleaned it a bit then it was fixed
@tacituskilgore80 Жыл бұрын
@@Rick-wy5mn I understand. Though I had a different problem so it doesn't really help. With my mouse the middle mouse button doesn't register clicks unless I do it really hard. Still, Thanks
@Rick-wy5mn Жыл бұрын
@@tacituskilgore80 That's the problem I had, so if it isn't the little mouse button then I'm not sure what the problem could me, bc it's just that smaaall little button
@Rocktechnoify4 ай бұрын
Thanks, helped me fix a problem!
@Beardedbob4 ай бұрын
Glad it helped! What problem was it?
@geowarrior_3 жыл бұрын
Is it possible to change the mouse switch? I’m not a huge fan of the razer optical switches
@Beardedbob3 жыл бұрын
Only for another Razer Opto mechanical from say the viper wired or ultimate
@geowarrior_3 жыл бұрын
@@Beardedbob ok I have the razer viper
@Beardedbob3 жыл бұрын
Then you can swap them. Its really easy. I've a teardown for the viper wired also kzbin.info/www/bejne/jYTCmZSAmZuhhdE
@geowarrior_3 жыл бұрын
@@Beardedbob ok thank you
@soacktv7 ай бұрын
Do you know if the left click button can be removed? I don't know why the button is stuck, it doesn't work well, the spring must be stuck or something like that, can you please help me? I have a razer cobra mouse but it is almost the same as the viper mini
@maukeep30612 жыл бұрын
Any idea on how to fix main buttons wobble? Really annoying, even if I have the headphones on and the noise of it is gone, I can still feel the wobbling.
@k4rlosl6062 жыл бұрын
i have a problem, my side button on my viper mini is loose. can u tell me how to fix it?
@tareraudetot3 жыл бұрын
After I paracorded my Viper Mini, that transparent lens below the sensor(the one from 6:50 in your video) is moving whenever I shake the mouse. What should I do to make it sit in place? The sound is annoying me.
@Beardedbob3 жыл бұрын
have you tried taking the mouse apart and putting it back together? it sounds like the lens hasn't been seated correctly. If you have then your only option will be to stick it in place with tape or glue without affecting the lens.
@tareraudetot3 жыл бұрын
@@Beardedbob I taped the lens in place and now it's perfect. Thanks for taking your time to reply,
@Beardedbob3 жыл бұрын
Np, glad I could help and its now sorted
@cook1e03 жыл бұрын
Hey, thanks for the great teardown. Not sure if you still read the comments, but is it possible to replace the DPI button on this? It seems to be raised so im not sure how to get it out.
@Beardedbob3 жыл бұрын
yep
@pouringpoipoi57772 жыл бұрын
my issue is left clicking stopped working after 4months... my question is can i replace it with kailh switches?? is viper mini even replacable i think they have own switches and cannot be find anywhere else... RIP
@atapberbumbung56812 ай бұрын
🥲I was hoping for middle mouse button information, at least its dimension... Time to go hunting other video then.
@Terra1012 жыл бұрын
I think that thing over the sensor is to not get RGB light into it.
@viperjavo3 жыл бұрын
is it possible to make the wheel steps more pronounced? thanks for your videos, amazing technical content
@Beardedbob3 жыл бұрын
If you can find another encoder the same sized you can swap it.
@fazendohistoria_3 жыл бұрын
@@Beardedbob a 9mm Kailh will fit? Thanks!
@ItsDavesWorld2 жыл бұрын
just took mine apart to fix the mouse wheel, now i have a broken side mouse button and the sensor isnt working anymore. any way i can fix my sensor?
@ItsDavesWorld2 жыл бұрын
also the click isnt clicking
@indexMemories3 жыл бұрын
Aside for a great mouse props to razer for not putting screws under feet.
@Beardedbob3 жыл бұрын
Yep they just need to keep that up
@troopermaybe41692 жыл бұрын
My left click stoped working the rest is fine of viper mini what should I do? Any advice ?
@seanrobinsonjr43634 жыл бұрын
Hi, i don't have much experience with mouses. I own both Model O version, MM711, and Viper mini. I prefer the shape and build quality of the Viper mini, but I have used it for over a month and I still find the mouse feet to be too slippery. Would you know if they actually are, or is this some kinda placebo effect? I assume people prefer the feet to be as "fast" as possible, but I just can't get used to them. All third party feet for the Viper mini seems to advertise for speed, so I assume they are just as fast if not faster than the stock ones.
@Beardedbob4 жыл бұрын
Overtime they should slow down. What mouse pad do you use?
@seanrobinsonjr43634 жыл бұрын
@@Beardedbob SteelSeries QcK XXL
@Mashwishi2 жыл бұрын
Do you know how to fix the Razer Vipr Mini scroll issue? Its scroll up when scrolling down and scrolling down when scrolling up most of the time i already update firmware and razer app still the same i wonder what's next solution
@joshiee92382 жыл бұрын
Did you try opening it up and cleaning it?
@paytonsrc53404 жыл бұрын
When switching my guns in fortnite with the scroll wheel it doesn’t work all the time
@Beardedbob4 жыл бұрын
Could be a failing encoder
@paytonsrc53404 жыл бұрын
Beardedbob is there a way to fix it
@paytonsrc53404 жыл бұрын
Beardedbob if I send it to you can you fix it olz
@AlexCS22 жыл бұрын
hey if i take off the sticker with all the serial codes and stuff will it be able to stick back?
@Beardedbob2 жыл бұрын
Ish sometimes the sticky doesn’t hold
@MrVirtuezzz4 жыл бұрын
Hey Bob, i'm left handed but really want this mouse. I currently use a model o- with the side buttons removed and tape covering the side buttons holes. What do you think i could cover the empty side button holes with on this one since it seems the holes would be larger? This is the only thing keeping me from buying this. Edit: I've just seen you say they can't be removed without damaging the mouse. RIP I guess...
@Beardedbob4 жыл бұрын
Yeah if you are happy to remove them perm then you can. As for covering hard to say maybe some thick black tape. I would wait to see if they released a left handed version
@MrVirtuezzz4 жыл бұрын
@@Beardedbob Yeah i probably will, though i doubt they'd make one. Thanks for the video anyway!
@edwardmillan132 жыл бұрын
Thank you for this video but let me ask can I use different can i use the mouse cable of DeathAdder elite in this viper like will the pin fit?
@Beardedbob2 жыл бұрын
Depends on the pin configuration some can be different
@zanretsu83634 жыл бұрын
Wow and i was just browsing on the net what the LoD on viper mini is about. Not sure i encounter the lift off distance issue, but so far the most glaring thing to me was when doing sprays on csgo, there is a little bit of jitter when i try to control the recoil.
@Beardedbob4 жыл бұрын
Interesting jitter, I've been hearing this more and more but I'm yet to feel/see it myself. What pad are you using?
@zanretsu83634 жыл бұрын
@@Beardedbob im using a Glorious Gaming XXL Mouse Pad, it's a cloth type pad.
@beegee65593 жыл бұрын
Hey man I heard you say youd link all the tools used in the description.. I dont see any of the tools
@Beardedbob3 жыл бұрын
my bad here they are. shop.beardedbob.com/collections/tools I've updated description also
@Alexanderrroo3 жыл бұрын
I have a razer viper 8k and a razer viper mini, do you think that the hardware from the 8k would fit into the mini body?
@Beardedbob3 жыл бұрын
Don't see it. I need to open the 8k to measure it but I would expect its not going to fit a mini base
@poofy69593 жыл бұрын
When I tried to peel off the bottom warranty,I only peeled off the top part or the coating of it and I can't peel it off right now Any suggestions on what I should do?
@Beardedbob3 жыл бұрын
Just keep working at picking off the final layer will come off without heat
@R3TR0J4N Жыл бұрын
regret not cheking any vid of disassembly, since im used to Razer mouse screws being under the mosue feet/skate 💀 now i just ruined my mouse
@glumboi99462 жыл бұрын
If u want a good feeling copy don't take it apart it will ruin ur travel on mb1 and 2 and may intoduce some sticking because razer used glue in some points in some batches which will result into weird clicks
@Terra1012 жыл бұрын
How do I know if my copy is one of those?
@glumboi99462 жыл бұрын
@@Terra101 Look at the bottom serial number
@Terra1012 жыл бұрын
@@glumboi9946 What should I look for?
@glumboi99462 жыл бұрын
@@Terra101 A number i dont know how long it is cuz i dont have my viper mini anymore
@Terra1012 жыл бұрын
@@glumboi9946 I mean what in the serial number should i look for to see if i have one of these batches?
@ktbMonster3 жыл бұрын
Hey man! What's that pen/stick thing you use to help you pull apart the mouse called?
@Beardedbob3 жыл бұрын
Tools I use shop.beardedbob.com/collections/tools
@n646n3 жыл бұрын
Spudger
@MrGlitchDogePE3 жыл бұрын
What should I do in case it creaks?
@Beardedbob3 жыл бұрын
wear some headphones :-p.... you can open it but whether you can sort the creaks is another issue as its more to do with the fit of the shell... you can lube the edge of the shell but I personally wouldn't
@ZenRyoku4 жыл бұрын
yeeeaaahhh... awesome Bob... thanks for this
@Beardedbob4 жыл бұрын
Thanks ZenRyoku glad you liked it 👍
@daniillyashenko724 жыл бұрын
From which manufacturer are the side buttons?
@Beardedbob4 жыл бұрын
TTC
@demonade042 жыл бұрын
Can I remove the side buttons? My plan is to custom paint it.
@Md_Shohag_ Жыл бұрын
Thanks a lot, man! I fix my viper mini by seeing your video.
@acostayrving35863 жыл бұрын
My razer viper mini sometimes presses the right click button by itself, do you know how to fix that issue? Hope you notice my comment, THANKS!
@Beardedbob3 жыл бұрын
sounds like the button is a little close to the switch. you could try loosening off the screw closest to that.
@acostayrving35863 жыл бұрын
@@Beardedbob I followed your advice, It actually helped Thanks! But there is a new problem though, My right mouse button is now creaking and it is very annoying and alarming do you have any advice for this kind of problem?
@furkantasoglu9112 жыл бұрын
Hey Bob, my viper mini has this small defect. I bought the mouse a week ago. Two edges on the back is slightly popped out (I didn't open my mouse). Should I RMA it, is there a quick fix to this, or if there isn't any should this effect it's performance?
@Beardedbob2 жыл бұрын
I would RMA it failing that take the top shell off and see what’s going on
@gb-yt9if4 жыл бұрын
I'm probably dumb because I cannot figure this out but, can I put this back together because my side button is rattly, so can I take this apart, fix the spring and put it back together. Or is it a one way thing. If I can put this back together are there possibly some instructions on how to do it. Hopefully you can answer this. Thanks
@Beardedbob4 жыл бұрын
You can take it Apart and then put it back together
@gb-yt9if4 жыл бұрын
@@Beardedbob Thanks, but if not sure how, does it go back on the way it came off, like a clip mechanism? Or is some other way or material? Thanks
@tacituskilgore80 Жыл бұрын
I have a problem with my Viper Mini. The middle mouse button is not working half the time and requires a lot of pressure to register a click.
@maral047 ай бұрын
Hey mate, did you find a fix ? Having the same issue after 1 year 11 months of usage
@tacituskilgore807 ай бұрын
@@maral04 Unfortunately not. I learnt to live with it. Whenever I want to click mmb I just use more force. It's not comfortable but I still haven't got a new mouse after an year. Seems it's a common issue with this mouse. That's why I can't recommend it to anyone.
@Frostecc3 жыл бұрын
Thanks for video man! I wanted to ask if you just know how to fix a mouse wheel? On click it works just 2 times out of 10, and most of the time it doesnt work when i click. Happened after 5 month since i got it :(
@Beardedbob3 жыл бұрын
The wheel is be the encoder so you will need to replace if. Aliexpress or ebay should have some
@f0rz533 жыл бұрын
greatvideo as allways. just got my RVM today, only one issue though, mouse 4 seems to be pushing up into the sidepanel, or somehow tilted a little bit upwards, which makes the button mushy and stiff, when i push it down a little and try to press it with another finger it presses similar to the mouse5. Any idea of how to fix this? Thanku in advance, ur a legend;)
@Beardedbob3 жыл бұрын
I would RMA it but if you can't I would take a look inside it's easy to open the viper mini just take it easy on the clips 👍
@martincepeh3 жыл бұрын
Help me what screwdriver i need to open my razer viper miini ? my mouse got water on it and I want to know if I can fix it.
@doomcrimson16803 жыл бұрын
do you know what laser diode and LDR are they using between the switches
@Beardedbob3 жыл бұрын
nope sorry
@jmdjdc32113 жыл бұрын
what screwdriver did you use on viper mini?
@Beardedbob3 жыл бұрын
Tools I use are here Tools @ shop.beardedbob.com/collections/tools
@sadg3 Жыл бұрын
Hey this a little late but I'm just curious if the sensor would go crazy if you removed the black tape kinda cover on top of it? Just cleaned the insides of my mini but I accidentally scraped the black tape thing on the sensor and now it doesn't look evenly applied. Will removing it f-up the sensor?
@Singh2k7 ай бұрын
did it work after that?
@Beni_Boi2 жыл бұрын
video of puting it back together?
@soyaisawesome68932 жыл бұрын
Thanks man finally I can clean my mouse now it was so dirty but why there is white dust on it's circuit board? Does anyone here know
@azisdatucali22903 жыл бұрын
what do I do when my mouse keeps disconnecting and connecting like is it dirty or something? please help
@zuga-39384 жыл бұрын
be careful with the backshell guys I got a really tiny hair crack right at the corner in the middle. The shell is really thin
@Beardedbob4 жыл бұрын
Good tip
@k.et04 жыл бұрын
Hey, can the top shell of the mouse be disassembled into pieces as well??
@Beardedbob3 жыл бұрын
No not on the viper mini. It can be on the viper wired.
@mcallenhernandez85373 жыл бұрын
Are this swappable switches or need to soldering?
@Beardedbob3 жыл бұрын
Swappable but only with other Razer opto mechanical switches.
@OfficialMinecraftEnderman2 жыл бұрын
I did it wrong I lifted up the mouse bottom first now I can't get it back on😭
@okay49024 жыл бұрын
About tearing off the sticker on the bottom... I don’t know how to do it. Can someone give me some guidance on this? What tools should I use?
@bread10514 жыл бұрын
You can put heat on the feet using a hair dryer, and you can use a plastic card like a credit card or something to remove the feet
@Beardedbob4 жыл бұрын
Here are the tools that I use shop.beardedbob.com/collections/tools
@Beardedbob4 жыл бұрын
Thanks for the extra tips
@prottayahmed60213 жыл бұрын
My Viper mini mouse scroll button died only after 2 month's use.... :( the scroll wheel was ok but scroll button press but don't work.... I return for warranty and still don't get it. Delivery and stock is blocked because of lockdown.... :(
@Beardedbob3 жыл бұрын
Yikes...
@jessierabino8223 жыл бұрын
same scroll button dead. other way to fix it ?
@prottayahmed60213 жыл бұрын
@@jessierabino822 Mine is in warranty right now. Usually dust is a major problem. Did you try clicking the button repeatedly many times for a few mins? Also, try to use blower directly on it. It's so sad that such a good mouse is ruined by cheap switches on scroll button.
@jessierabino8223 жыл бұрын
@@prottayahmed6021 yea i already did the rapid click sometimes its work sometime not . i gonna try the blower thing.thx on suggestion bro
@prottayahmed60213 жыл бұрын
@@jessierabino822 np. Btw, if you don't mind, could you share the S/N number of your mouse. Partially. The number should start with PM20XX sth. Could you say what that number is? 20 = Year 2020. And the other 2 numbers are week number of that year. So, if the mouse was created on the last week of 2020, it'd be 2052. 52nd, being last week in the year.
@shaftous Жыл бұрын
I have a viper mini and recently it's been flicking weirdly when i move it to top or the left, it's like its sensitivity goes up to 9999 when moved to the left or top, any idea as to why this is happening and how to fix it?
@abmal87305 ай бұрын
Did u fix it?
@danraz0ralice3403 жыл бұрын
my mouse just decided to stop moving,.. still be able click buttons kinda pissed
@Beardedbob3 жыл бұрын
Gutted..... any dust on the sensor? Can you RMA it?
@jay28_ljy4 жыл бұрын
Hi, i have a questions, is the encoder basically a counter only or? i was studying about it but i dont really get it
@Beardedbob4 жыл бұрын
the encoder is what you feel when you get the tactile feed back, it also tracks how much your scroll wheel has moved.
@EnormeEkoH2 жыл бұрын
hi, does the g305 pcb fit in the rvm? i dont have a 3d printer so cant buy base plate and not even zoros one cause he only ship for US
@arale3383 жыл бұрын
hi, i opened my rvm in the attempt to fix my loose mouse5 button, turns out it just fell off, is there any way i could fix it without replacing it?
@Beardedbob3 жыл бұрын
Ouch.. only by gluing it back on.
@alisaqlain44442 жыл бұрын
i have been using my viperr mini for more than a year now but now it has started to disconnect and reconnect while im playing randomly , could u please let me know it this is a hardware issue and which part to be specific
@Beardedbob2 жыл бұрын
Maybe a spilt in the cable?
@speciti47514 жыл бұрын
Just one question... can you tell me how to put it back together...
@Beardedbob4 жыл бұрын
Play it in reverse
@speciti47514 жыл бұрын
@@Beardedbob im serios tho I can't put it back together
@speciti47514 жыл бұрын
@@Beardedbob ahh never mind it worked thx
@carlbalboa95243 жыл бұрын
helloooo my viper mini has a loose mouse button (both) is there any fix? and pls can you put a timestamp for me as a guide thank you.
@Beardedbob3 жыл бұрын
I've not done a video on it but when its loose how do you mean? side wobble or pre travel?
@carlbalboa95243 жыл бұрын
@@Beardedbob thank you you replied my issue is side wobble it also make a loose sound when i shake it up its bothering me a bit.
@macwtf75293 жыл бұрын
How can I fix my side buttons that are loose? I really need a reply thank you.
@Beardedbob3 жыл бұрын
RMA ? Not sure otherise you would need to look inside . You can also ask on my discord for help discord.gg/cJnfBvXB
@demon-qj7px Жыл бұрын
Yall its not turning on when i plug it in and i tried other computers as well but its just not working can anyone help?
@IIronyy4 жыл бұрын
Kinda upset that my usb broke on the cord and I dont have a screw driver small enough
@Beardedbob4 жыл бұрын
😱. If you post it to me I’ll sort it for you. Might be cheaper to buy the screwdriver