Sandtex recommend using a fungicidal wash before painting otherwise mould / growths will come through the paint.
@sololandscaping Жыл бұрын
I had the volume up as you just started cutting in around the gutter and that loud blue flash scared the life out of me 😂
@chelamcguire2 жыл бұрын
Thanks for your tips on painting rough walls outside. I am at the tearing my hair out stage! One enormous property on three floors and I still cannot build this blasted 'scaffolding tower' that I treated myself to. Hey-ho, I wanted to save money, but.............. Thank God the weather is grand. Okay, off now up the shaky ladder! (Oops, just saw the ending of your video and I think that I'll just have myself a B&H before I get cracking!)
@robertlyons20285 жыл бұрын
you shoulda got rid of the ivy residue with a wire brush and soapy water , it'll bleed through in a few weeks
@clintmannion5598 Жыл бұрын
Yer ok m8 take it u have never painted in your life there is no way you could get that of with a wire brush and soapy water
@benholland3682 Жыл бұрын
@@clintmannion5598 Use a pressure washer. That would pull it off. Use low flow and high pressure to prevent drenching the area. Leaving organic material behind paint wont leave a clean or finish with any sort of longevity. The organic material holds moisture and will rot underneath the paint causing the paint to blister and peel off in a matter of months.
@pauldavies8145 Жыл бұрын
Use grinding brush lazy
@zookini6 ай бұрын
Unless you put stucco over the vine marks, it will show under the paint
@YS-sg3uv Жыл бұрын
Just bought a tub of masonary paint, thanks for the demo. Very helpful for a first timer.
@SteveBlakey3 жыл бұрын
I always roll the first coat and get as close to the edges as possible it makes the cutting in easier and fingers crossed ready for a second roll once you finished cutting in, also it might not need cutting in again in some cases, you know this anyway keep up the good work love your vids 👍🐱🏍👌
@MrAndychannon4 жыл бұрын
How much did you charge for that. Only asking as I've got one similar to do
@berusbogzniszczenia435910 ай бұрын
Well done. What do you think about stabilising solution before painting render ? Is it really need IT or not ?
@whomadethatsaltysoup3 жыл бұрын
Not going to stir it next to the Porsche...Love it! Thanks for sharing. 👍😂
@TheGaffferrrr5 жыл бұрын
What about the dead ivy on the wall?
@simonright15074 жыл бұрын
Wouldn't you jet wash the wall first ? 🤔
@wormwood64243 жыл бұрын
The pebbles fall off if you jet wash.
@AG-ICU3 жыл бұрын
@@wormwood6424 if it’s blown it needs to come off best way is with a jet wash
@Steve-so2jm3 жыл бұрын
Great job as always. Where can I get the original heavy duty dust sheets,as the new ones are not made like they use to be. Cheers 👍
@decker1130Ай бұрын
Double arm frames better for masonry as you can give it some stick as single arm won’t last five minutes 👍
@davieboygaming31935 жыл бұрын
i'd love to see a video on how you work out how much paint you need for a job. great video as always
@Lukebourne995 жыл бұрын
Solid job candleman. I used to do it that way for years. Now i spray and back roll. Faster and easier on the shoulders.
@JAG-xf2hm5 жыл бұрын
can i use this method with pebble dash? whats that colour please?
@jaccounts46594 жыл бұрын
Did you clean the wall first?
@686bim Жыл бұрын
why add water,will it take take the waterproofing away,becauce i live on coast,thanx,i am buying santex asswell.
@ratchriat17165 жыл бұрын
good quality paint and the finished is perfect enjoy the video
@tonyp96015 жыл бұрын
Good to see you did it properly getting full coverage first coat. Nothing extra needed.
@bsweeney48752 жыл бұрын
Many thanks for your advice, much appreciated. I’ve since painted my pebbled dashed garage which has quite a deep texture which means there’s little pin pits where the brushed and rollered paint hasn’t really penetrated deep enough. Do you think I should be concerned about that? Kind regards Bill
@wallingtonfilming2 жыл бұрын
Should be ok 👍
@mckinnondecorators41785 жыл бұрын
Buddy I've just taken on another exterior job. Heavy rendering so you can imagine the state or the long pile after a days graft. Filled with stones and looking worth for itself. I've always used an "extra long pile sleeve" from screwfix but never lasts very long. 1 job maybe. What brand/pile sleeve you use for heavy rendering?
@peterolley71595 жыл бұрын
Mate try a Hamilton perfection extra long pile roller sleeve they are bang on for that and last a long time
@mrfix-it27285 жыл бұрын
I'd opt for my airless spray gun on Tyrolean walls/Pebble dash/K Rendered etc.... Flop it and hop it guys mask up plenty good. 👍🏻
@GRIBBO-773 жыл бұрын
Where you get your hat from mate?
@planetconker11045 жыл бұрын
Hi do the walls need washing down first? I'm going to be doing a similar job on a house that I'm moving into and I have zero experience, but it's a lot less to paint then what you did in this video.
@wallingtonfilming5 жыл бұрын
Planet Conker If it’s got green on it you can wash 🧼 it down with bleach, if not just paint 🎨 it.
@antallaczko87935 жыл бұрын
Yes, it needs a proper treatment, otherwise you will end up with algae and mould behind the paint. It's not just about the green. At every outside wall you might have dust, dust from the cars' exhaust, algae or maybe mould. Usually a good painter is applying the paint on a clean surface. Cowboys are painting on any surface. Last year I had an industrial inside job with grease dirty blistering paint on steel beams in a beer factory. Couldn't use the pressure washer, had to use caustic soda to clean the grease, after that wire brushes and attachments of every type. Full face mask, scraped off paint in a closed container. Sanding machine attached to vacuum, all the gears 110 volt. You need knowledge and data mining, not just a brush, a roller and a trades diploma to become a painter. BTW he is a good guy, but he can't cope with the new standards. Probably learnt the methods 100 years ago.
@Boogie4Googie4 жыл бұрын
@@antallaczko8793 I can assure you this shoddy workmanship would've been called the same 100 years / 50 years ago as it is today! CRAP!! He probably thinks the only reason to clean the wall is to keep the dirt off his brush!
@lukeanthony29922 жыл бұрын
@@antallaczko8793 hey .. you know your stuff.. I've got a pebbledash to paint, I've applied a good quality biocide to kill the algae, but l am wondering about washing it down..powerwashing is supposed to be not a good idea for raw pebbledash , so will l paint over the dead 'crusts' ..is this OK..Will be adding owatrol emulsa bond to the first coat of paint
@gw20315 жыл бұрын
Great job Candleman !! Any tips for masonry paint into new concrete render? A mate said a coat of pva first ? And maybe plenty thinners on the first cost ? Any help appreciated mate !
@peterolley71595 жыл бұрын
If you roll side ways you wouldn't need to cut the bottom in and it won't flick
@gordonnewton48322 жыл бұрын
He's cutting the bottom in because it has a lip dopey
@coolI123323 жыл бұрын
Can you use air sprayer for this paint on harling wall guys? Thanks
@PKP1 Жыл бұрын
How many coats would you suggest?
@munirshafi26473 жыл бұрын
Do you not need stabiliser solution first before painting on old masonry paint ?
@CARLIN47372 жыл бұрын
depends if its all powdery to the touch then yes. but if its sound and you can tell just from running your hand over the surface.
@kent75255 жыл бұрын
Good job as always candle man don't worry the vid was not boring to us keep up the good work your painting buddy in the states.
@jamesgrant38123 жыл бұрын
Is the weather in April good to paint ??
@agrafes63 жыл бұрын
What did you pore into the paint and why, was it water or white spirit?👍🏻🇬🇧
@spinx12003 жыл бұрын
Water mate.
@nodriveasusephotos80193 жыл бұрын
masonry paint traps water as its plastic. stops the wall from breathing, water gets in when blasted with rain but gets trapped in the mortar and then wants to come out.
@adamsmith65943 жыл бұрын
Everywhere online states painting new tyrolean - leave it a few days before painting for first time. What's a few days lol. 2 is a couple .... 3? 4?. What's a few?
@grahamjones92423 жыл бұрын
Great video .
@coasttocoast-bn3yi2 жыл бұрын
Nice job
@liamh94853 жыл бұрын
How much would u charge for that area
@pacman45682 жыл бұрын
Move the paint pot under where you are going to roll, saves a lot of time and mess. Cut in after you have rolled the main area. Why don't you seal the wall with unibond PVA first?
@jordancarlin71154 жыл бұрын
How long did it take to put a couple of coats on it mate?
@reamannmacbiatiagh20575 жыл бұрын
How do you get a neat straight line between two terrace house that has pebbledashed but do not want to get paint on the neighbours pebble dashed walls?
@grahamjones92423 жыл бұрын
Gaffer tape.
@reamannmacbiatiagh20573 жыл бұрын
@@grahamjones9242 Thanks Graham I'll have a we practice when the better weather comes. Ray
@rifatzia88643 жыл бұрын
Well done 👏 ✔ 👍 excellent information
@maisonjournals6007Ай бұрын
Really helpful thank you
@maxwellmc97345 жыл бұрын
You must be the only painter that doesn't have a RADIO...LOL
@brenfit42573 жыл бұрын
I always have Radio....for last 20yrs....
@ThePhilandPam5 жыл бұрын
Like that ladder with the handrails but have to admit I hate painting render, great vid 👍
@peakyparttimers93625 жыл бұрын
Hiya how's it going. A question for you. I've been arguing with this painter on KZbin he goes under the name of ( painting and decorating) he's been miss coating bare plaster work with pva and I keep replying saying this is wrong and should always miss coat with a thinned down contract paint. So I thought I'd ask the man! You've done plenty of new builds what do you think?
@andrewwaddams10225 жыл бұрын
Shit it
@wallingtonfilming5 жыл бұрын
DJA 67 Well me old cocker, I’d do it the way you said why would you use pva it’s more expensive for a start. I see no reason why you would use it & i do not know any that has. Merry Christmas 🎄 The Candleman 🕯☕️🚬
@mrfix-it27285 жыл бұрын
Mist coat new bare plaster with doctored Latex emulsion 70/30 paint/water. Flop it and hop it.
@gordonnewton48322 жыл бұрын
Pissed down paint not PVA .
@karlstrangeboston51957 ай бұрын
😂😂 would love to see that wall now
@brancakes13313 жыл бұрын
Good video mate. I'm thinking of painting my house exterior. My old man was a painter and decorater so did a bit with him a s a boy. Only thing is my house is rough casted, never seen paint and I think I'll be biting off more than I can chew.
@gailsbusylife49913 жыл бұрын
Hi, did you try to give it a go? I'm thinking of maybe trying to paint mine and it's rough cast as well. Thanks
@malachy94003 жыл бұрын
@@gailsbusylife4991 if its any use to you i started painting my bungalow this week which is rough cast. its slow going because its so rough that a roller doesnt work and you have to use a brush to dab the paint on, along with a twirling motion to try to cover everything.
@gailsbusylife49913 жыл бұрын
@@malachy9400 thank you 👍
@coolI123323 жыл бұрын
Have you guys any photos to see how it looks once painted?
@raysmith68913 жыл бұрын
Long pile Hamilton from tool station less than £5. Dulux trade paint weather shield from travis £22. 2 coats on my rough cast and it looks great. Went from dirty grey colour to magnolia and it’s pucker.
@UTPP4 жыл бұрын
How many coats do you do mate?
@shaneeiboi.crazymoments78865 жыл бұрын
Isn't it too cold to use that paint because they've got 365 sandtex that you can use in -10 conditions. Just wondering?
@andrewwaddams10225 жыл бұрын
Yeaa
@cbyam13003 жыл бұрын
Right, that's my Easter weekend sorted !!
@Haribo_boyce3 жыл бұрын
what's the reasoning behind diluting the paint ???
@omnipotentpumpkin97553 жыл бұрын
4:10 Good tip!
@scottmclean42373 жыл бұрын
Have you any suggestions how I can get a straight line when I’m painting my pebble dash wall on the part where it is semi detached to the neighbours? I can’t think of a way to get perfect straight line
@garethmurt3 жыл бұрын
Just use a plumb line and mark a straight line and do it by eye or you can temporarily screw a batton to the wall and paint down it
@eezy251able2 жыл бұрын
Frog tape
@redjeans283 жыл бұрын
Beautiful
@JohnMartin-oh6bf3 жыл бұрын
Is that tyrolene?...if it is it’s a tough render to paint. Used to do it on a few schools around the country. You did a first class job of it lad.
@mal36895 жыл бұрын
What roller head are you using mate? (Manufacturers name)
@nigelnigel8825 жыл бұрын
Nice work buddy. Thanks for sharing :)
@jonSnow-cs2dm4 жыл бұрын
Did u not power wash that wall prime it that could all peal off dirr behind it hope it dosent hmmm
@gee37703 жыл бұрын
It’s like watching paint dry 😂
@Jafmanz5 жыл бұрын
nice that you left that organic matter on the wall, when it decomposes it will create an air pocket and the paint will flake off.
@wallingtonfilming5 жыл бұрын
Luna_Dei You talk a load of crap 💩
@Jafmanz5 жыл бұрын
@@wallingtonfilming Thats what all the cowboys say.
@t4ng032 жыл бұрын
I've never cut that paint with water or spirits. Just slap it on straight from the bucket 😂
@andrewwaddams10225 жыл бұрын
Good job gorgeous lol.more vidssssss please.for Xmas
@chriseverett11424 жыл бұрын
Look at the years of dirt on that wall . Must cut down on time away from the pub .
@paulcahoon99715 жыл бұрын
You could have bumped that wall if you'd had of used pliolite...
@CARLIN47375 жыл бұрын
Are you a bastion of Oxbridge
@edenheynatz42043 жыл бұрын
I think the suicidal jokes were a bit too far.
@turloyd2 жыл бұрын
Really? I think he never went far enough... that porsche exhaust pipe would of come in handy!👍😂🏎💨
@adamsargeson5203 жыл бұрын
What Porsche is that ?
@trueman929911 ай бұрын
Surprised you didn't pressure wash before hand and if needed use an anti fungal
@thomasdoyle81582 ай бұрын
Int milk brilliant 😂😂😂
@adrianmcardle853 жыл бұрын
What is that roller head
@peteramond33585 жыл бұрын
Another top job from a top man nice work candle me old mucker
@dr.strangerwhonos44495 жыл бұрын
How much would you charge to paint an area that size?
@80zbabyz5 жыл бұрын
I like that ladder bro. Good job👍👍
@billprezioso3677 Жыл бұрын
I’m not sure but wouldn’t you be dead after the first shot to the temple why did you need 4
@andrewpoole72362 жыл бұрын
Why add water??
@gaylemcgowan22602 жыл бұрын
Very funny & informative 🙌
@Mmmmetro5 жыл бұрын
I was surprised you never applied PVA to start?
@antallaczko87935 жыл бұрын
Why would you apply Pva, when you have a better binder in the paint. If you want to extend the drying time Pva is OK, otherwise it's nonsense
@lisamorris51674 жыл бұрын
i am sorry but if you expect work from this no chance. no cleaning of wall before painting, not good.
@raphaelbenson85263 жыл бұрын
No priming?
@billyclegg30847 ай бұрын
No biocide Dolly...?
@MrBlackbeltkickboxer5 жыл бұрын
Those purdy poles are luvley
@jaysgardens46265 жыл бұрын
Brilliant video 👍
@colinbarlow87763 жыл бұрын
How to price jobs up
@ascno19705 жыл бұрын
Nice 🙌
@hoplite101able5 жыл бұрын
Nice stuff there CM ..
@catsarereallyfurryaliens4 жыл бұрын
Terribly quiet audio on intro
@ciaraboyle304 жыл бұрын
Spray painting is way cooler then the roller. !!! Spray the Feck off the wall
@andrewwaddams10225 жыл бұрын
More more
@Nickpaintbrush5 жыл бұрын
Don't worry mate it was on fastest speed lol
@markdean7924Ай бұрын
Think you need to lay off the cheap cider fella!
@maxwellmc97345 жыл бұрын
Lol
@martingriffiths57125 жыл бұрын
What’s better.... Private or Site?!!
@wallingtonfilming5 жыл бұрын
Michael Griffin All sit ☕️🕯🚬
@sekainiheiwa36503 жыл бұрын
whats s fucking boring? boring is to sit infront of a f, tv
@fordie7115 жыл бұрын
very unclassy with the rope..maybe you should thing before doing something so stupid,
@wallingtonfilming5 жыл бұрын
paul ford Maybe you should just get a sense of humour, or are you on antidepressants as well, If you are going to do it , do it and stop 🛑 talking about it
@leem49465 жыл бұрын
@@fordie711 ike he cares if he's lost a sub 😂
@Guide504 Жыл бұрын
Ivy not cleaned off, this is not an instructional video.