How to prime a new turbo (Mini Cooper S or JCW)

How to prime a new turbo (Mini Cooper S or JCW)
In this video im showing you how I primed my new JMTC S42.
I got this turbo and my stage 3 RPM tune from Mario Palza.
Mario Palza’s. Contact info:
[e-mail]
mqubed_motorspo...
Project Mini,
Maintenance, Modifications & Repairs made easy.
My goal is to help as many people as possible to keep their Mini Coopers on the road. I find the easiest way to do all the maintenance that these cars are known for, plus I’ll teach you how to do your own performance and esthetic mods. Subscribe to my channel and let’s keep the amazing Mini Cooper community on the road!!!
Project Mini merchandise: teespring.com/stores/project-...
R53 Mini Cooper S- How to’s: • R53 Mini Cooper S - ho...
Mini Cooper S R56 - How to’s: • Mini Cooper S R56 - Ho...
My Instagram is @project_mini_official
/ project_mini_official
- Facebook groups -
Mini Cooper R53 Enthusiasts: groups/16499...
R56 Mini Cooper S enthusiasts: groups/72982...
Mini Cooper DIY: groups/51890...
Tools every Mini Cooper owner needs.
- commission earned below -
1. Bentley service manual
2002-2006: amzn.to/2QVZDaE
2007-2013: amzn.to/3h1Hhj5
2. BMW specific code reader
Foxwell NT510 Elite (This is what I use): amzn.to/3bAuRgX
3. Timing chain tool
EWK W10 W11 R50 R52 R53 Camshaft Locking Fixture Timing Chain Special Tool for Mini Cooper 2001-2006: amzn.to/3shwbMV
EWK Camshaft Timing Chain Cam Locking Tool for Mini Cooper S N14 R55 R56: amzn.to/3jTo84W
4. Electric ratchet
Milwaukee 2457-20 M12 Cordless 3/8" Sub-Compact 35 ft-Lbs 250 RPM Ratchet w/ Variable Speed Trigger : amzn.to/330QtiO
Milwaukee (2-Pack) 48-11-2420 M12 REDLITHIUM 2.0 Compact Battery Packs: amzn.to/3lWfNis
Milwaukee Genuine OEM 48-59-2401 M12 Lithium Ion 12 Volt Battery Charger w/LED Indicating, Red: amzn.to/2GsxhCQ
5. Hose clamp pliers
Hose clamp pliers: amzn.to/2QZ0HKW
Cable type hose clamp pliers: amzn.to/3lSRW3l
6. Thin wall spark plug sockets
OSOF 14mm & 16mm Spark Plug Socket Thin Wall 12-Point Removal Tool 3/8 inch Square Drive Set: amzn.to/2QYBrED
7. Torx bits
GEARDRIVER 23-Piece Torx Bit Socket and External Torx Socket Set, Premium S2 and Cr-V Steel Made, Tamper Proof Bit Sockets, Storage Case Included: amzn.to/2FbgKCy
- commission earned above -
As an Amazon Associate I earn from qualifying purchases

[@ProjectMini]

- Facebook groups - Mini Cooper R53 Enthusiasts: facebook.com/groups/164990851647892/?ref=share R56 Mini Cooper S enthusiasts: facebook.com/groups/729821991242039/?ref=share Mini Cooper DIY: facebook.com/groups/518907605479579/?ref=share

[@srtowner]

Another great video man. I have a small block chevy distributor with the cam gear turned down that I use for oil priming older small block chevy motors. Keep up the awesome work you do with these videos.

[@buddy36788]

Good stuff. Thanks for your videos.

[@olipessino6294]

Great video man thanks

[@lisan.5453]

The Facebook group is great! Learned so much from it

[@ProjectMini]

Thank you for being a member 👍

[@lisan.5453]

@@ProjectMini pretty much the only reason I check my Facebook lol. Learned so much about MINIs

[@minimanadam]

Oooo black turbo ! Whst different about that turbo ? I just did an upgraded k04 and almost done

[@xavierm.9265]

Great video with the fuse! Need your help if you will please! I installed a new turbo, sport cat, changed both turbo oil lines, primed the turbo, spinned the turbo blade but no oil was fed so the oil was pooled. Tightened it up and started the car, got smoke likely from the turbo. I turned off the car immediately within 5 seconds. I detached the turbo oil line to inspect and I definitely had engine oil. Nothing special was mention in my instruction. My mini is a F55 S

[@Cmelo9621]

I disconnected my charge line to access a bolt on the tensioner. I took the charge out & connected everything back reverse. Made sure all sensors and hose were attached properly. When i tried to start the car it kinda acted weak and turned off i tried to get it to start 2 more times and it was acting weak like trying to start but turning real slow then shutting off. Will this work for me since my turbo isn’t new , technically will i have to do this to get the charge up and running ??

[@gretre4560]

Can you do a forge R56 turbo blanket installation video

[@ProjectMini]

Yes, very soon 💪

[@gretre4560]

@@ProjectMini Awesome! I just bought it. For the price, the Forge blanket for the stock R56 s and jcw turbo is unbeatable for sure.

[@godzillar5665]

What turbo is that? Hybrid?

[@ProjectMini]

Its a JMTC S42, Mario Palza sells them. His contact info is in the description of the video

[@chief470]

Can I do it without putting oil ?

[@ProjectMini]

No