How To Professionally Detail Car Rims/Wheels Part 1-Washing & Decontaminating

‪@CarCraftAutoDetailing‬ 👍Please Like the Video 🔔 Subscribe 😀Enjoy
If you’d like to support this channel and future content please consider buying me a coffee at:
☕️ www.buymeacoffee.com/CCAD
Visit the CCAD Amazon Storefront for my top detailing products:
www.amazon.com/shop/carcrafta...
Products used in video: (items may be updated to what I currently use/recommend)
🇺🇸U.S.A. 🇨🇦Canada 🇪🇺Europe Links:
Tyre Cleaner: bit.ly/3SQOdmB
Wheel Cleaner: bit.ly/3e3b7bz
Wash Bucket/Grit Guards: amzn.to/3Ct6IqG
Pressure Washer: amzn.to/3RSDGpT
Pressure Washer Gun: amzn.to/3VPEdw3
Pressure washer wand: amzn.to/3To64Sv
Tyre Brush: amzn.to/3rQDvkp
Detailing Wheel/Trim Brush: bit.ly/3C9wJLk
Wheel Mitt: bit.ly/3fQZZPy
Wash Detergent: amzn.to/3Tez4LY
Tornador Black: amzn.to/3MvlL7W
Iron Remover: amzn.to/3yC5iZK
Tar Remover: amzn.to/3emgW4d
Clay Bar: amzn.to/3CKJpZv
Clay Lube: ebay.us/ZNOAoT
Drying Towel: amzn.to/3Tkw5Sq
Car Air Blower/Vac: amzn.to/3TNIAGK
IPA Panel Wipe: amzn.to/3Vhi21H
Towels For IPA Wipe: amzn.to/3zzzR2S
Great Nitrile Detailing Gloves: ebay.us/Ewr3rz
🇦🇺 Australia Links:
Tyre Cleaner: www.waxit.com.au/products/shi...
Wheel Cleaner: www.waxit.com.au/products/nv-...
Wash Bucket/Grit Guards: www.waxit.com.au/products/eco...
Pressure Washer: ebay.us/Q0Ohes
Pressure Washer Gun: amzn.to/3Tp7Ti5
Pressure Washer Wand: amzn.to/3sjYnkc
Tyre Brush: amzn.to/3EAbKUX
Wheel Barrel Brushes: www.waxit.com.au/products/con...
Detailing/Wheel Brush: www.waxit.com.au/products/car...
Wheel Mitt: www.waxit.com.au/products/cas...
Wash Detergent: www.waxit.com.au/products/nv-...
Tornador Black: www.waxit.com.au/products/tor...
Iron Remover: www.waxit.com.au/products/nv-...
Tar Remover: www.waxit.com.au/products/car...
Clay Bar: www.waxit.com.au/products/sch...
Clay Lube: www.waxit.com.au/products/car...
IPA Panel Wipe: www.waxit.com.au/products/car...
Towels For IPA Wipe:www.waxit.com.au/products/bre...
Great Nitrile Detailing Gloves: www.waxit.com.au/products/gri...
ℹ️ Some listed products in the description box contain Amazon and other affiliate links. By clicking these links I’ll receive a small commission on purchases made without any additional cost to you. If you purchase through my affiliate links it greatly helps support this channel and future content so thank you in advance❣️
#wheelcleaner #wheelcleaning #carcraftautodetailing
0:00 Introduction
0:14 HOW TO PROFESSIONALLY DETAIL RIMS
3:16 OPTIMUM POWER CLEAN
4:40 TORNADOR BLACK
6:01 TYRE BRUSH
6:54 SWISSVAX
7:17 MICROFIBRE
8:30 CARPRO TR.IX
9:29 PUMP ACTION SPRAY BOTTLE
9:57 CARPRO ULTRA FINE
10:03 CARPRO ECHO2
11:57 CARPRO ERASER

[@TomaOvidiu]

The most well maintained Alfa in the world. You're simply amazing how you take care about every single detail. Cheers Sandro

[@michelnarbonne3979]

That what I call detailing, like I said before your video are very well explained, for sure I will do the same detailing on my 2013 mustang wheels. Thanks again for the great video.

[@thetraindriver01]

Nice vid Sandro, looking forward to the next one mate👌

[@RenoveAutoService]

I will test the trix product from Carpro Interesting to have a tar and iron remover at the same time Thanks for sharing your job

[@steverabbits]

Wow, now that is thorough! Fantastic video mate, I've been looking for an in depth one of detailing gloss black alloys for months! I'm about to do the ones on my Jaguar XK. Off to watch part 2 now!

[@CarCraftAutoDetailing]

Thanks and I hope this two part series helps you out!

[@steverabbits]

@@CarCraftAutoDetailing 100% it has Sandro! I struggled to find it though and I've just figured out why. I searched alloys which is not in the title. We don't tend to say rims here in the UK. It's the best video on this subject on KZbin by far mate, deserves many more views

[@smilecraftdentistry7809]

great job Sandro! can concrete be removed from rims through claying? I had some fresh concrete splash on to my rims recently and I dint realise now it's set hard and has left lots of splash marks

[@777AndrewR]

Yes thanks. So a clay mitt is a bit better because it's more heavy duty or it covers more area without dropping it on ground? Just trying to see the benefits of clay mitt you mentioned. Do you use clay mitts?

[@777AndrewR]

Great video! Is the clay you use in this video considered light duty, medium or heavy duty? I have been claying a 7 year old car that's never been clayed and been pulling off junk for days I noticed some areas are super smooth and others are still a bit rough so can you recommend a stronger clay or should I keep claying or machine polish it? Thanks

[@jmt4288]

Sandro, first off, thanks for all the great videos! I know this particular vid is a bit old, and not sure if you still monitor the posts, but was curious whether you've dealt with removing wheel weight adhesive. I've seen difference sources recommend WD-40, Goo Gone, 3M Adhesive Remover, and even an eraser wheel, but wanted to get your take on how to tackle this issue. Thanks!

[@CarCraftAutoDetailing]

I’ll tend to use a heat gun to soften the glue and then try and pick off the majority of the backing tape/adhesive. Then I’ll tend to use a tar/adhesive remover like Carpro Tar-X - apply it, work it over with a cloth and continue doing that till it all breaks down and wipes off.

[@om3973]

Whst would charge to do that service no with out polish ?

[@jasonhester1489]

Where did you get the foaming trigger sprayer

[@tomatoindustriesdetailing2955]

www.tensens.com.au/OATPB_dash_007/Canyon-Foaming-Spray-Trigger-225mm-White/pd.php www.ebay.com.au/itm/ILOT-Foaming-Trigger-Sprayer-For-Various-Cleaning-White-2pcs-pack-/201772667553?hash=item2efa9692a1:g:vFkAAOSwZQRYbQoW www.ebay.com.au/itm/Mondial-Foaming-Trigger-Spray-Head-Use-With-Meguiars-Valet-Pro-Bilberry-Etc-/261759173991

[@jamiec9866]

Hey Sandro, I hear from a very good source it's much better to get alloys powder coated than painted, I don't know if that'll help you?

[@jamiec9866]

Car Craft Auto Detailing One of my girlfriend's brothers (She has six brothers lol) is a mechanic, owns his own garage & is a car nut. I know a few mechanics & he's the best of them. It was his advice, you still need to find a good one though. Luckily he has a lot of contacts & knows a guy. Happy to help YOU for once lol ;-)

[@OiDavoMate]

where do you get that foaming head from?

[@OiDavoMate]

thanks !

[@saulmtz7309]

Where can I find a frame to hold the tire?

[@CarCraftAutoDetailing]

They are panel stands, you’ll find them on EBay or at a local auto paint supply store.

[@Jnaszty559]

Damn sounds like you have shitty amateur powder coaters where you live. I have really good powder coaters here in California.

[@777AndrewR]

Yes thanks. So a clay mitt is a bit better because it's more heavy duty or it covers more area without dropping it on ground? Just trying to see the benefits of clay mitt you mentioned. Do you use clay mitts?