How To Professionally Spray Paint Doors with an Airless Sprayer. Artisons Painting and Remodeling.

[@parrot849]

Best “1st” time explanation to us DIYer’s I’ve ever seen showing how to properly spray paint one’s home doors, thank you very much

[@artisonspaintingremodeling]

happy to help

[@amorgan5844]

Finally someone who gets to the point and says what tip size to use for doors!! Thank you!

[@stevenbrown5210]

All I could hear was wanh wanh wanh wanh wanh because of the terrible echo

[@artisonspaintingremodeling]

@@stevenbrown5210 it was an echoie room

[@amorgan5844]

@@artisonspaintingremodeling that guy has never been on a job site in his life🤣 I heard everything perfectly fine, fuck the haters.

[@pawitrapadchana2]

Thats the best demonstration of how to spray doors ive seen.

[@artisonspaintingremodeling]

Thanks

[@karenstout8420]

I replaced all of my interior doors. I used a paint sprayer to paint them. After the prepping and masking the areas off, I was able to get the doors done quickly. I was pleasantly surprised at the results. I couldn’t have done it without your helpful instructions!!

[@artisonspaintingremodeling]

Great. I'm so happy to hear that.

[@อมลณัฐภู่รัตน์-ฤ1ฉ]

Great idea in setting up so many doors in 1 space. You make it look so easy.

[@artisonspaintingremodeling]

Thanks

[@pattygarver2830]

30 doors, 2 sides each = 60 sides. That’s 10 squats per door = 300 squats. Great workout! 😛BTW the doors look great 👍🏼

[@artisonspaintingremodeling]

Thanks, actually like 600 squats. Great workout, ladder work is even more involved.

[@Longbow06]

Thanks for the video, the best airless sprayer instructions I have watched for doors. Very real time savings

[@artisonspaintingremodeling]

Glad to hear it.

[@andy-pk3lq]

Nice to see you using enamel, not like most of the others using water based

[@artisonspaintingremodeling]

Yes, thanks. Enamel dries the hardest.

[@coloradorockies2258]

This is the beswt video I have seen on painting; right mix of tip, tricks, and demonstration!

[@artisonspaintingremodeling]

Thanks I appreciate it.

[@innercityunit2112]

Really great video...I run a painting and decorating business in the UK and airless spraying is part of the setup, mainly used on new build work and commercial refurbs..a Graco 495 and we tend to follow the American style of doors & trim, then walls and lastly ceilings, all water-based products when spraying..although sometimes we will leave all the pre-primed doors until everything else is fully completed, then mask a whole room off (or two) and then airless spray 2 coats of water based satin or gloss to all the doors..very quick and a great finish....I have watched lots of airless spray painting videos on youtube, connected with the building industry obviously, and I have to say yours is easily the best!...Very well explained, concise and to the point and for the first time in ages, a guy that can actually spray properly (walk the walk), professional and the proper technique and execution...a great job done sir! and very good advice given and your technique was so good, it was a pleasure to watch...believe me, I have seen many videos on this subject on youtube, that have been painful to watch, performed by people who simply haven't got a clue..sometimes I just can't believe what I'm witnessing.....anyway, you did a really professional job and the doors had a great finish with the first coat...such a refreshing change to see someone do a proper spray job!...I just subscribed

[@artisonspaintingremodeling]

Thank you very much. I appreciate it. God bless you and your business. Its amazing this day and age how we can all connect across the world and share our lives, talents and spirit with one another and encourage each other. Hopefully soon we can all ascend above primitive things like war and greed and come together as one, helping each other and our Earth in love and harmony.

[@simoncrewe5625]

I'm looking to set up myself here in UK. I just need few tips, where would I purchase that builders paper he uses and also the plastic sheeting to covering the doorways

[@artisonspaintingremodeling]

@@simoncrewe5625 online at zoro.com has lots of good tools, 3m masking plastic has a static cling to prevent it from blowing around

[@simoncrewe5625]

@@artisonspaintingremodeling ahh mate ya a top man thankyou much appreciated

[@artisonspaintingremodeling]

@@simoncrewe5625 no problem. You may be able to get the builder paper or rosin paper at a paint store or home building center near you but the internet may be the best way to get the plastic.

[@ristoheimonen7436]

Thanks for sharing! Instead of aquiring new doors you can paint them. And fast with the paint spray machine. Ill do it with our kitchen cabin doors as well. Thanks again. And Lord's blessings.

[@artisonspaintingremodeling]

Thanks, you too. Multiple light coats to start is best for beginners. God bless you and your family.

[@WillLeingang]

Thanks for the tip tip 😂 I tried using 515 & 315 and getting major runs and heavy holidays all over no matter how fast I moved. I’m going to try a 311 even though they say to use that for stain on the package. Wish me luck! Great work!

[@artisonspaintingremodeling]

Fine finish low pressure tips 308 even better

[@WillLeingang]

For BM Advance? I'll try that too, thanks!@@artisonspaintingremodeling

[@artisonspaintingremodeling]

@@WillLeingang advance and coronado door and cabinet paint are great

[@NormaDirks-hb6dq]

That's a great finish and you make it look so easy.

[@artisonspaintingremodeling]

Thanks

[@darrendouglas3704]

Got Airless & HVLP Spray units .For finish I prefer HVLP unit for Undercoat will use Airless.Takes seconds do a door it's setting up takes time If possible hang doors Use couple eye loops ,books & length chain For best finish but need space lay doors flat ,spray edges (inc top & bottom forms seal protect from water)

[@artisonspaintingremodeling]

You can also stack the doors on their sides up against each other to spray the tops in the bottoms and 1 shot first. In all the years I've been painting I'm never once had an issue with doors warping without having a tops and bottoms painted. This is the fastest method and most efficient to do a high number of doors. If you have the Room just do the accordion method

[@eddierobles2137]

Great demonstration . Highly professional . 👏👏

[@artisonspaintingremodeling]

Thanks, I appreciate it

[@davidherbert8657]

thank you for sharing your knowledge helps me avoid some mistakes

[@thedalz5308]

What we have ascertained here is that Joy is good with a hose, great video

[@carverdahlin2728]

I prefer my own personally made rotisserie and rack on-site setup so it's always the perfect angle for spraying. I don't like leaning them on the wall because sometimes it warps

[@artisonspaintingremodeling]

I've never had an issue

[@carverdahlin2728]

I've had it a few times with solid core doors that after the paint dried and took it off the wall the door was warped and curved

[@carolforestiere6677]

Beautiful job! Thank you. I needed this to get started on my doors.

[@artisonspaintingremodeling]

My pleasure. Multiple Light coats is key to prevent runs and sags.

[@adamrobinson5631]

Maybe try a .210 for the spines, less overspray, and a gun extension to save your knees and back. Thats just my preferred set up. .412 fflp is my go to tip for doors, .310 fflp for trim.

[@kak2tnt]

Thank you so much for the tips. I am not a pro but I am going to tackle some big home projects.You make it look so easy breezy which comes from much practice and having a great system.

[@artisonspaintingremodeling]

Michelle S anyone can do it, picture moving you hand like a machine and it takes a little practice but it's all in your mind. Just remember to keep your hand moving

[@djsconstruction9448]

Best video I ever see thanks again

[@artisonspaintingremodeling]

Thanks that means a lot. God bless

[@shure46]

good video , and thanks for getting the shot at an angle close up to see the finish , tons people don't do that , and ANYTHING looks good "head on from 6 feet away" in a video .... gotta get the close up , at the angle , seeing the light from the side .... That's how ya do it .... good vid ..... can't tell you how many videos I've seen where I KNOW those cabinets look like crap "up close at an angle" but the people say how wonderful they are and show a head on shot from a distance ..... I watched one gal just sloppin paint on with chip brushes and sponge brushes , then sayin how great it looks .... ya right .... lol

[@artisonspaintingremodeling]

Thanks

[@aydenerickson]

Joseph, Great video, thank you so much for sharing your knowledge and expertise with all of us. I own and operate a small painting company in Calgary Canada 🇨🇦. I will like to share a trick with you once spraying doors. I do it exactly the same way with the only difference that I use a heavy card board in top of the doors to prevent overspray on the ceilings. Stay blessed amigo!

[@artisonspaintingremodeling]

Great idea. Sometimes I use a swivel holder that mounts to an extension pole and you can by cardboard inserts. Once the cardboard gets trashed you can swap it out fast. We were painting the ceiling and walls in here so I wasn't concerned but great idea. Thanks for the encouragement and god bless you and your painting company. It's always great to share info and better each other, after all we are all brothers and sisters.

[@aydenerickson]

Artisons Painting & Remodeling I thought you might be painting the ceilings.

[@rorybellamy2533]

Get a flexible whip hose at the pistol and you'll have more flex and less cramp in your hand . Great paint job!

[@artisonspaintingremodeling]

Yes. This rig didnt have one hooked up but my other 4 have them.

[@franktrumble1529]

Thank you for mentioning that. Whip hose makes a huge difference in Comfort. Makes a huge difference when spraying full cabinets in and out.

[@craiggoldstein2461]

Great instructional and tips...About to buy my first airless for a home we just purchased and needs all the interior trim/doors painted. Your video was very helpful thank you!

[@artisonspaintingremodeling]

Glad to help.

[@crtrue6432]

Same here... I'm just in the researching phase of buying a an airless sprayer. I'm not sure what to buy, or even how to decide which one. I don't want a cheap one, but I also don't want to break the bank. I'm not a professional painter and I probably will only use it infrequently. But What I when I do use it, it will be for things I want to look great when the project is done. Like kitchen cabinets for example. I want them to look professionally done.

[@ger808]

@@crtrue6432 prob best buying something from Wagner then , go for the middle of the road machines as the cheaper ones literally were designed to break after a couple uses on a diyer so to make money off parts etc , and making them think it was there fault also when in fact the machines and parts were made from cheap shite ,they all do it even the major league giant I. Sprayers Graco

[@colosistvan]

Yeah, the doors were all perfect as they were, perfectly hard good wood, perfectly flat and smooth, no dents or damages, no need to pain stripping or repairs etc. Easy

[@artisonspaintingremodeling]

Yes. Stripping is a huge task.

[@campingalbertacanada248]

Great job here. I spray trim as well and I always love peoples videos who do it right. Thanks for video.

[@artisonspaintingremodeling]

Thanks for the compliment

[@Daniel-dp5gi]

Why are so many people jerks in the comments?? Life's too short to be a dick. Thanks for the video, and no matter what the method or the machine, it worked and I bet the customer was happy. Thanks for the tips.

[@artisonspaintingremodeling]

I agree, thanks

[@josepalomares997]

Man with good heart god bless your business

[@artisonspaintingremodeling]

Thanks, god bless you and your family too

[@andjunglepunkthirteen760]

Which god are we talking about here guys? I heard one of the Norse ones was pretty decent. Who are you guys using?

[@artisonspaintingremodeling]

@@andjunglepunkthirteen760 Odin did keep all his promises lol

[@joewynne3802]

Thanks Jody!!! You really helped me out with this video. Way better than than what I was planning to do

[@artisonspaintingremodeling]

More than happy to help. Rock on.

[@bmker5469]

Great informative video.. Ill be doing my doors at the weekend and after watching this I'm sure they'll turn out looking smooth and even, If not expect a phone call sir.

[@dougjones4987]

i love the door shapes it leaves on the wall too:)

[@artisonspaintingremodeling]

Walls were getting primed and painted with light sand so not an issue. If doing it in a finished space plastic on walls and ceiling

[@nothingsimpostleble1593]

You had mentioned that there's 30 doors in the room I can spray like 60 doors in less space and the Manpower it takes to set that room up is insane my way of the doors I stacked the doors against the wall and have my one door that gets sprayed suspended with a two-by-four about nine feet long and then I just lean the doors up stacked at an angle against the wall I can do this operation by myself

[@TeslaBoy123]

I smell u a sht talker like many other u have not idea what a professional paint work mean booooooo

[@hemang1112]

Awesome love your assembly line approach it's massive time saver

[@artisonspaintingremodeling]

Thanks.

[@อิศรานุวัฒน์แสงเพชรอ่อน-ซ8ญ]

Wow looks awesome

[@AZAdam33]

So satisfying to watch.

[@cloutchasers8101]

I like using a extension to spray with a 310 tip

[@andymerchant4776]

Hi Joseph, thanks for the great video.... Plan on buying a Graco X5 to do interior of house, would you still advise the 411 tip for doors and trim with this sprayer ? Also, what tip for the walls ? Thanks, Andy

[@artisonspaintingremodeling]

311 for doors and trim, 511 walls -513 or 515 and back roll right away. Honestly brush and roll walls is less messy.

[@saburius]

If you don't spray the sides but only the face, you can turn the doors around and then you can spray the sides.

[@TeslaBoy123]

Look easy when a professional done it but obviously isn't easy good work btw 👍

[@artisonspaintingremodeling]

Thanks. If you follow the method you can yield professional results.

[@TeslaBoy123]

@@artisonspaintingremodeling I'm a plumber I respect other tradesman hard work

[@artisonspaintingremodeling]

@@TeslaBoy123 same here. Olumbing is no easy thing. Great name bu the way. Merry Christmas

[@pujo28]

Is it ok to not take the doors off and spray them as they hang if I’m spraying the rest of the trim in the room?

[@artisonspaintingremodeling]

yes mask hinges and remove knobs

[@twsd]

You should try Graco's FFLP tips. With your approach you will achieve excellent results.

[@artisonspaintingremodeling]

I do use them. I find the 311 is faster and still has very good results. I use the FFLP tips like 310 on cabinets and other specialty items

[@sjd4532]

I have a white painted door which is satin finish and I want to paint it black, what should I do to prep the door before airless spray

[@artisonspaintingremodeling]

2 coats of Benjamin Moore paint should cover. Light sand and clean. If you're worried about adhesion use aura or spray a bonding primer first.

[@Carolina-yg8rv]

Great video. Thank you for sharing your experience.

[@artisonspaintingremodeling]

My pleasure.

[@pbaylis1]

Thanks for sharing. Nice clean and well-organised set up. Perfect technique and results.

[@tanyathongmak1660]

You make it look easy

[@artisonspaintingremodeling]

by.. I have lots of years of experience spraying.

[@hairystag]

Nice video mate thanks for sharing, from nz cheers

[@artisonspaintingremodeling]

Thanks. Its pretty cool how we can connect from across the world. God bless.

[@brentdahlstrom9555]

I think a better option for turning the pressure down to reduce overspray or maybe you are concerned about runs would be to use a smaller tip. A smaller tip with the pressure turned all the way up is what should be used. It works every time for me.

[@cloutchasers8101]

Yup a 310

[@ger808]

If you did that with my airless sprayer it would knock the door down... For jobs like that I really have to turn the machine right down but use a smaller tip and orpheus size too

[@ger808]

@@cloutchasers8101 correct perfect for spraying wood and furniture doors trim etc

[@fischerdrywall]

What sprayer and gun do you recommend for an entry level painter. I was thinking 390 with 2 finger gun ????

[@artisonspaintingremodeling]

yes 390 or 395 graco or titan 440 and any graco or titan gun is good

[@Carl-LaFong1618]

Thank you for the tips. I feel more confident now to spray my cabinets.

[@daniell8201]

Don’t forget to j roll the top and bottom. This is really important in bathrooms

[@artisonspaintingremodeling]

or you can stack doors first and spray tops and bottoms first

[@iamdad916]

Thank you for sharing!! Saved me so much time

[@artisonspaintingremodeling]

Glad to help

[@tanyathongmak303]

you did a perfect job painting my room.god bless you

[@JdubbJdubb]

What about the top and bottom edges of the door. Do you not apply paint to those surfaces.

[@artisonspaintingremodeling]

If they are not sealed you can. I've never seen them sealed and it's never an issue to be honest. Exterior door needs to be sealed due to climate.

[@JdubbJdubb]

@@artisonspaintingremodeling i guess when you think about it you will never see those surfaces anyway.

[@davidrodriguez5804]

thank

[@prophecynewschannel7398]

does the paint ever bridge to thee paint sticks either at the top or bottom?

[@artisonspaintingremodeling]

No

[@WSmith2024]

Good skills and good equipment, thanks for the video.

[@artisonspaintingremodeling]

Thanks for the compliment

[@joeregnier8535]

Great Job with the Video! God Bless and Keep You!

[@katydid4418]

Beautiful results with the spray painting technique.

[@youstheproinc8035]

Excellent job

[@herrehhh4628]

man that how professionals do it!!!

[@artisonspaintingremodeling]

Thanks

[@macbook12345]

Best to use the stack racks they avoid runs and the possibility of hitting the ceiling. Then you have to flip the doors so more hand contact. the Stack racks work well well.

[@artisonspaintingremodeling]

When we flip the doors we only touch the 5 gallon stick without touching the doors. Does the rack mar the door surface being it is still curing, I would imagine spraying 2 coats wouldn't allow the doors to be done in a day. We never have sag or run issues.

[@hmtrimworks7148]

Thanks, I’ll be getting the corner brackets

[@stevecendales7560]

Excellent instructions and advice. Really helpful and you touched on all the questions I had and more. Thanks.

[@seattleecho]

Thank you for excellent video, by the way Can I use HomeRight C800971 sprayer for room door Thanks

[@artisonspaintingremodeling]

I've never heard of that one. Check reviews and Graco x5 is fine too

[@michaeltrozera311]

Well done!

[@artisonspaintingremodeling]

Thanks, I appreciate it. God bless you.

[@holmesdec1]

Airless, but would use a whip hose to make it easier and prefer to use door stackersrather than stand the doors but good video and knows some spray technique.

[@bhagchand713]

Good worker

[@georgemelo5326]

Hi do you sand then before 2 coat?

[@artisonspaintingremodeling]

These didn't need it. If you need to make sure to vac floor and doors after sanding and use a tack cloth

[@mrcwoodworks4523]

You the best bro

[@nickchamp]

Damn. I really do need a paint sprayer.

[@ralphryan4999]

Great video👌

[@artisonspaintingremodeling]

Thanks, much appreciated.

[@MAGA1440-s2m]

Nice job, perfect finish like mirror! 👍

[@artisonspaintingremodeling]

Thanks

[@PedrazaArt1]

My brother your definitely A professional 👏 From one painter to the other Great work my friend ✨✨✨

[@artisonspaintingremodeling]

Thanks, I appreciate. God bless

[@kengarza5955]

Good job buddy

[@artisonspaintingremodeling]

Thanks brother

[@gilguzman8359]

Great job Sir!

[@artisonspaintingremodeling]

Thanks

[@yellowflower3945]

You make it look so easy. How much is a sprayer?

[@artisonspaintingremodeling]

The ones we use are roughly 1000-1,200. Our larger ones are about 5,000 with 2 guns.

[@shawnrudkin2864]

Thank you. Nicely done.

[@artisonspaintingremodeling]

Thanks, a man of fine taste I see.

[@Kleiminc]

Good video bro! Thanks

[@artisonspaintingremodeling]

Thanks, I appreciate it

[@scottsaustin]

That's not an HVLP machine, that's an airless gun you're using and it sounds like my Titan 440 airless rig. In my experience I've found that airless gives a superior finish to HVLP when spraying thick viscous coatings like enamels & latex even with a wet extender added HVLP dries it too fast causing a sandpaper finish, so you're using the right tool-just the wrong title

[@artisonspaintingremodeling]

scottsaustin It is a Graco FinishPro II 395 PC Air-assisted Airless Sprayer. It has an HVLP on the unit and also an airless 395 sprayer. For this video I'm using the airless at a low pressure with a 311 tip. I agree about liking the airless finish for enamel and latex paints. The best for cabinets are rac x fine finish 310 tips and I like the output of the 311 for doors and trim.

[@scottsaustin]

oh, ok, gotcha not familiar with that product, but I just acquired a FinishPro HVLP 9.5 for pre-cats with cabinets. I checked out the Graco vid on the 395 and have to say I'm a bit envioius, kind of feel like I should've bought that instead-but-still-looks like you've got a use more product with that machine to prime the pump & line and get the coating to the gun than a cup attached HVLP unit, so I'll stick with it, but I see the value in the 395 none the less and will probably be selling off my 440 and other airless rigs for one of those soon ;) And yes, I like using the Rac X FFLP green tips, but the last job I used a FFLP 208 on the cabinents and a 210 on a some narrow baseboards and the rest of the door frames and sills in the rest of the house, the 14 doors I shot with a FFLP 310 and I shot the ceilings with a Titan 517 (I've got so many brand new ones lying around that came with guns) and primed the drywall & texture in a bathroom with a Rac X 515

[@artisonspaintingremodeling]

I like the fine finish tips and the rac x last longer than the rac v tips. I sprayed 350 cabinet doors for Owens Corning's labs and the tip still works great and uses a minimum amount of paint.

[@MrRealpainter]

Dude i have a 395,,,and ur full of shit,by still talking HVLP!

[@yosoydpfknr2855]

Kevlux86 You are correct and you know wt you talking about.100 agreed with you.They have the wrong title

[@Ramdodge582]

good you know half the meaning of tip #'s first # - double it to get the width of pattern in inches second 2 #- the hole size in thousands of inches so 411 is 8" wide with 0.011" hole

[@dull_boy_274]

Great video thanks for sharing

[@lindaferpozzi6323]

Wow, you've made that look so simple, but I'm sure it's an art! Not sure I'm brave enough to attempt this myself.

[@artisonspaintingremodeling]

Thanks, I appreciate it. Practice makes perfect.

[@ger808]

Go for it ...the key to all this is the prep the spraying is the easy part ...what he failed to mention a d what's a crucial point to any good sprayer is the speed of your passes and also another crucial factor is the product your going to use , some of them finished are not suitable for spraying so always make sure to ask at your supplier of paint,is this product suitable for spray finishing with an airless type sprayer ! Also sometimes there is a requirement to thin your paint slightly so it passes through the machine easier . But what they never tell you is when you use a solvent to thin your paint like white spirit , it actually sets the dry time off way quicker , which in itself can be a great thing, the downfall to this it effect the overall look or finish of the paint so it can reduces the sheen slightly , a pro would notice that the normal Joe may not so if it's a high gloss finish your after I suggest using an additive instead of the spirit like using owatrol oil , you will maintain that glassy look using that , and the same with the softer looks like satin or eggshell

[@robchurchill1368]

nice work. thanks!!!!

[@artisonspaintingremodeling]

Thanks, I appreciate it

[@ger808]

Can you ask the guy spraying what pressure on the machine is he using to achieve that perfect finish as he puts it himself ...I'm sure that's a pretty important factor too

[@artisonspaintingremodeling]

You dial up the pressure until there are no longer 2 lines on either side of the spray pattern

[@dh737]

Great job

[@artisonspaintingremodeling]

Thanks

[@humbertomedina4231]

Loved this...Doors looking good. Great set up. Thank you for this

[@TheYooToob2000]

Very cool to watch. What model sprayer would you recommend for a homeowner doing the occasional project, like painting trim and doors?

[@ireshdilshan9371]

Please show what type of paint, how to mix or prepare it and spray machine set up. Everything before spraying and tips and recommendations.

[@artisonspaintingremodeling]

There are other videos on set up, prep, priming the paint. Get a clean 5 gallon bucket and pour the paint through a strainer so there are not any chunks. Have the paint supplier shake it prior to painting. Use a 311 or 310 fine finish tip from graco. Use a semigloss or satin enamel paint and spray 2 light coats

[@marammahmoud528]

I like it great job👍🏻

[@artisonspaintingremodeling]

Thanks it means a lot.

[@homehackshowtos]

Thanks for the video. Cool to randomly find someone on KZbin that shops at JC licht. I go to the Wheaton one. God bless

[@artisonspaintingremodeling]

It's a small world.

[@manuelsantos8213]

Great video

[@artisonspaintingremodeling]

Thanks. God bless

[@MilwaukeeMaker]

Thanks for a great video ! Simple and smooth!

[@artisonspaintingremodeling]

My pleasure

[@ronmortimer252]

Good video. Imagine if you had to paint all those doors with say a 2 inch brush and a 4 inch roller - an undercoat and 2 topcoats. If you're getting that kind of work these spray guns pay for themselves in a few months don't they? You have to learn how to use them of course. And the finish, beautiful.

[@artisonspaintingremodeling]

True.

[@brianmckenzie9171]

Time saving is big but the smooth finish is the main reason I use airless for spraying door. I recently bought a nice 15 year old house that had all the interior trim sprayed. But for some crazy reason the previous owner decided to repaint the metal front door with a brush. Painting a wood grain door with a brush can look ok if one uses a good brush and only paint with the wood grain. But painting a flat metal door with a brush, no matter how expensive the brush, can only turn out ugly to my eyes. So I sanded the door down to remove the brush lines and sprayed it. Now the first impression given by the front door matches the smooth spray finish of the interior trim and doors.

[@Normambo]

Wow! That was an impressive job. Informative!

[@artisonspaintingremodeling]

Thanks

[@eschrader]

Any tips on spraying 3 interior doors outside that were stripped and sanded to bare wood?

[@artisonspaintingremodeling]

Use a good exterior oil primer or hig quality water baser primer like Stix, light sand, clean, spray 2 coats premium exterior gloss or soft gloss Benjamin Moore aura or mooreglo. If interior use Benjamin Moore advamce semigloss allow to dry 16 hours between coats.

[@eschrader]

@@artisonspaintingremodeling awesome tips! Thank you! I had to rush 2 coats of Bullseye 123 using a 12" HVLP sprayer, too wide of a tip but its all HD had to rent. Waited 12 hours then did the last 2 final coats of satin enamel ~2 hours apart for the final coat. Wish I sanded after primer and had a smaller tip. Setting the doors up next to each other was way better than flipping them on a sawhorse. Do it.

[@artisonspaintingremodeling]

@@eschrader true that

[@rvingmontanezway103]

Nice job man great idea I’m starting my new painting small business here in Florida this will definitely help thanks for sharing God Bless you 🙏 I have subscribed

[@artisonspaintingremodeling]

Thanks. God bless you too in all things and your business

[@rvingmontanezway103]

Artisons Painting & Remodeling Thanks brother 🙏👍🇺🇸

[@jimmysullivan6118]

Good job looks good

[@artisonspaintingremodeling]

Thanks

[@fabrigasan2150]

Ci fosse in italiano ve ne saremmo grati saluti ai colleghi pittori 👋🏻👋🏻