How To Properly Disassemble A PSP 1000

[@danilodalessandro2423]

Really really thank you! After a lot of year this video helped me a lot. I once changed a display on this model, and although it may sound stupid, I reversed the screws and the longer one pierced the display..this time thanks to your video and description of the screws I prevented it from happening, thank you very much!

[@TotalKommando]

Glad it was helpful : )

[@Arayadavido]

I love how sony forced their engineers to make us a harder time to dissamble their products. At least it's enjoyable haha. Keep going I'll more than pleased to se the PSP smokey mod

[@TotalKommando]

I think they were being extra careful with their first handheld, its not that bad but its also pretty old. 2000/3000 became much simpler in terms of how all the parts are sandwiched together.

[@justincredible5406]

Phenomenal video! So much care and fine detail explanation! Thank you for your motor skills, patience and presentation! :)

[@theironscorpion2128]

Thank you this really helped me when I had grease my UMD.

[@darleqin]

thank you for these useful videos!!!!!!!!!!!!

[@TotalKommando]

Part 2 - Shell Swap Video Is Out: kzbin.info/www/bejne/r4W5eIBsg9GlapIsi=vl_jjzQ-w_pTTJwM ( Part Cleaning, Reassembly & Third Party Shell Tweak )

[@huutidang7662]

keep it up, bro

[@xroyal2179]

That is way too hard

[@RzVa317]

"If you don't have those... I honestly don't know" :D

[@demijebus6831]

Quick tip for tweezers slipping. Dip the tips on an extra set in plasti dip or flex seal. Just make sure to rough up the tip for adhesion and clean in a degreasor or 99% iso before dipping.

[@TotalKommando]

That would be the optimal way, I personally would have just threw on some shrink tube, but the idea behind the tutorial accessibility. Not everyone has shrinktube or plastidip laying around.

[@demijebus6831]

@TotalKommando absolutely. It is just something that I did a while back to some of my tools, and it has been tremendously helpful for me when building computers, models, or just trying to prevent marking up surfaces. I thought I would share.

[@TotalKommando]

100% not discouraging you at all, I actually have been wanting to buy plastidip spray or in liquid can form for a while, sadly where im at atm its no where to be found, i tried flexi but found it to suck lol

[@demijebus6831]

@TotalKommando all good. That sucks that you can't get it where you are. Thanks for all your awesome videos. They are very helpful.

[@ians_parks]

Is that smoke grey/black shell matte? I have one for the 3000 which is glossy and extremely prone to scratching. Would love to find an after market smoke shell with a matte finish.

[@TotalKommando]

Yea, sadly its no longer being sold, I bought it year ago, and now I gotta repair mine since some of the screw points were weak

[@muhdazrin3038]

For psp model 2000 also have ?

[@HD_6350]

Awesome video, you convinced me to but a clear shell and try to fix my old psp 1000. Just a question, because I miss the metal clip which holds the R button you remove at 4:28. Can I buy it somewhere? Because I managed to find some missing components from aliexpress and ebay, but not this one

[@TotalKommando]

Now that you mention it, I have never seen that part being sold, you can get away without it, you could try to secure it into place with tape on the edge : ) Good luck

[@HD_6350]

@@TotalKommando The button works without the tape, so yeah, that metal piece is not needed. But now I have another problem. I've purchased a new power board. I connected it to the board with the ribbon cable, but when I try to plug the ac adapter and push the switch the system doesn't turn on. If I short some pins near the mechanical switch I can see the green led, but the system doesn't turn on. Could it be defective?

[@TotalKommando]

try adding a thin piece of tape on the ribbon, it may need extra pressure or its just defective : |

[@DivineShadowWalker]

Great video, im curious if this video applies to the psp 3000 model as well, im completely new to modding anything but picked up a psp 3000 yesterday

[@TotalKommando]

Its very different but I will have a video covering it sometime in the future

[@DivineShadowWalker]

@@TotalKommando wow thank you for the fast reply! Loving your videos even if some of them aren't relevant to my system. Very well made and can tell the time you take to put out videos you are proud of. Subscribing for sure!

[@stevexanny]

Watching this a second time, I'm surprised a video of this quality has less than 1000 views! I got 2 questions: Can i use triggers from a psp 2000 or 3000 on the 1000 model? I can only find triggers in black for those 2 newer models Also, the silver frame that goes around the psp, would i be able to remove that after only removing the subframe? Thinking of buying another frame and spraypainting it back to give the PSP an all black look

[@TotalKommando]

Yea : ( Triggers no, slim ones will not fit, I will have a video in the future show casing how to paint both the triggers and outline. I too want a black trim for the 1000 lol To avoid breaking anything, remove it after you remove the motherboard and power switch board. The top trim will be the finicky one

[@stevexanny]

I'm excited! Hopefully the videos are all out by august so I can take my PSP on vacation with me lol :) but i think the screen mod will be enough at first and the triggers/frame can be done at a later time@@TotalKommando

[@TotalKommando]

@@stevexanny Yea Im trying really hard to release one video a week, hoping to double the production next month once I take my "vacay" the ips one im working on as we speak is one of the most time consuming ones.

[@viridianpixel]

This is such a phenomenal video, thank you. I’ll be disassembling a PSP for the first time soon. Quick question, will my iFixit screwdriver kit be adequate for this project or will I have to invest in something extra tools?

[@TotalKommando]

The only thing you will have to worry about is not having a long tip for the right side back screws, otherwise any kit with a good selection of Philips will do just fine. again as long as the tips can reach

[@viridianpixel]

@@TotalKommando Thanks!

[@DiyaJeewan]

Can you show how to disassembled the psp street

[@TotalKommando]

Planned : )

[@DiyaJeewan]

@@TotalKommando any luck so far with the psp street please show me how to replace the bottom part the buttons because years ago I put glue to stick the sticker down then like it got hard and when I removed the sticker there's nothing 😳😳😳so please help😤❤️🥹👋

[@TotalKommando]

@@DiyaJeewan This is something I also wanna figure out too, i will have a disassembly video and maybe a repair video for the media buttons, i got one thats also broken

[@DiyaJeewan]

@@TotalKommando thanks bro you the best❤️

[@DiyaJeewan]

@@TotalKommando do you have ig maybe I can show you a Pic of my psp

[@Jr-ff2tq]

Can you please show a video where you put the housing clear case on it. It will really be usefull for me thanks😊

[@TotalKommando]

kzbin.info/www/bejne/r4W5eIBsg9GlapIsi=vl_jjzQ-w_pTTJwM : )

[@austinrichard8046]

8:18 lolll this is a funny clip

[@TotalKommando]

yay someone finally found it funny enough to point it out lol