HOW TO REBUILD A YAMAHA BLASTER TOP END

In today's video we rebuilt the top end on my Yamaha blaster. if you want to enter the giveaway then make sure you leave a like and comment of this weeks video. Ends this Monday!!! New videos every Tuesday!!!!
Make sure you leave a like and comment!!!!🦞
Spread the word BUFF DUCK RACING to 2k🦆
Check us out on instagram @buffduckracing 🐢
Buff Duck apparel in stock! DM me on instagram 🦧
Music by my homie Cheef Phantom, show him some love!!! 🐘kzbin.info/door/x0J...

[@thequadrnner6734]

Great timing! Out I’m my shed right now with position in hand!

[@buffduckracing7721]

Hahah😂. Glad to help!

[@toast250r6]

Out of all 2 strokes ive had, the blaster is the hardest to put back on a pipe getting the damn hole lined up haha great video guys! 2k cannot believe it man great tutorial blasters are just so easy to do a top end on! Can't wait for the next video. Soon you will be celebrating 3k you just wait!

[@buffduckracing7721]

Haha yes they are! Thanks so much dude! Love the support!🦆

[@4mul]

there is no way that you only have 2.81 subs! i never looked at your sub count and i thought you were a big youtuber. Your vids are well put together and fun to watch. Big things are coming and i know it bro.

[@buffduckracing7721]

Thanks so much man! That means a ton! Much more to come💪🏽🦆

[@manny.9273]

Let's gooo! Ya did it🦆

[@buffduckracing7721]

Yes!!!!

[@justinleland7461]

Man i love that 88 and how well you keep er in good shape. Recent sub, been catching up on your Blaster vids. Excellent content

[@buffduckracing7721]

Thanks man!! I Appreciate the feedback and follow! 🦆

[@ricobrown1748]

U DA GOAT FOR THIS ☝️

[@jberk6719]

I have an 88 blaster myself and these videos are a blast to watch!

[@buffduckracing7721]

Thank so much dude!!

[@jberk6719]

@@buffduckracing7721 This video was a great help

[@kidd1378]

Haha get it? Blast, like blaster

[@bruhbray147]

Congrats on 2k

[@buffduckracing7721]

Thanks man!

[@DIRTVLOG]

Hey, love your video buddy good luck on your KZbin journey

[@buffduckracing7721]

Thanks so much man!!

[@trinivill3065]

Blaster content love it .. keep sending her 💫💫💫 just got with my blaster.. wish I could ride with you

[@buffduckracing7721]

Sweet dude! I’d love to do a quad meet sometime!

[@natedog2167]

Love you man your vids are lit

[@buffduckracing7721]

Thanks dude!

[@amietester205]

i love your videos on the blaster

[@owenkrupa9985]

Love the blaster

[@meganwest3973]

Love watching your videos

[@buffduckracing7721]

Thank you!!🦆

[@daveyiop6604]

Blaster is looking clean

[@buffduckracing7721]

Thank ya!

[@coopershuart6753]

About to do mine soon, nice job

[@buffduckracing7721]

Thanks man! Have fun!

[@anthonycyr6903]

I really enjoy the Blaster content!!!

[@buffduckracing7721]

Thanks man!!

[@kidd1378]

Im about to do this to my brother's blaster plus some. Guy before used rtf and it plugged the ports. Gotta rebuild entire top end and get a new crank/crank bearing

[@buffduckracing7721]

Dang dude! Have fun! They are so cool

[@kidd1378]

@@buffduckracing7721 it rode nice the 2 hours it ran lol

[@colindefreece2601]

I just bought some a soil dominator the other day and it made my blaster so mush more snappy than maxima super m oil.

[@buffduckracing7721]

Dang!!! That’s awesome, might have to try that!

[@censoredaccess7429]

Thanks for the knowledge!

[@buffduckracing7721]

No problem man!

[@BTR2018]

Sick video.

[@buffduckracing7721]

Thanks man!

[@poolfixer]

Great video guys!

[@buffduckracing7721]

Thanks man!!! 🦆

[@lukehand9438]

i love that blaster!

[@buffduckracing7721]

Let’s gooooo

[@ianpierce2212]

Love the videos

[@buffduckracing7721]

Thanks dude!🤟🏽🦆

[@andyhiginbotham2052]

🐐

[@buffduckracing7721]

🦆

[@williambrennan7168]

I’m giving the give away a shot. Congrats on the deer too!

[@buffduckracing7721]

Thanks man!! You’re in!

[@NRASUPPORTER1911]

What brand was the cylinder head/jug you used thank you! Was it a eBay head if so I’m going to order one I didn’t know if they are good or not

[@billjensen9122]

Thank you for recording

[@edochoa3452]

Blaster thanks for all the love and support!

[@buffduckracing7721]

lets goo. Thanks Ed!! 🦆

[@deceasedlaugh6421]

Congrats

[@buffduckracing7721]

Thanks dude!

[@ClewLess1]

Don't have a blaster but just picked up a Warrior 👏🏿👏🏿

[@buffduckracing7721]

Nice man! Those are sick!

[@geoffnelson64]

I want that knife lol cheers to 2k

[@buffduckracing7721]

Thanks dude!! Entered!

[@lookaround.3423]

Just bought a blaster.. it's old and beat up but it rips... I want to learn how to rebuild it and make it run & look sexy. Thanks for the videos

[@buffduckracing7721]

That’s awesome dude!!

[@jonathanoutlaw8925]

@@buffduckracing7721 do u glue the gasket on or just let it sit

[@sawyergribble7108]

Hi your a under rated KZbinr and really cool

[@buffduckracing7721]

Thanks man! The means a lot!

[@ant9867]

Good it needed it

[@buffduckracing7721]

Haha. Yeah dude!

[@davey2k237]

Keep the work up

[@buffduckracing7721]

Will do man! Thank

[@jeffcox8261]

Cool stuff

[@buffduckracing7721]

Thanks dude!

[@erikbowman9557]

i have a 93 yamaha blaster and its awesome

[@buffduckracing7721]

That’s sweet dude!!

[@brianrobinson7069]

Hey do you know where to get a 2004 blaster stator that is 4 wire ? Or are they 5 wires . I have got 2 that don't work . Any links on where to get one from buffduckracing ?

[@buffduckracing7721]

Ooooo. I’m not too sure on that. It can be hard to find parts but I have gotten a lot of mine from e bay

[@owenkrupa9985]

Great video

[@buffduckracing7721]

Thanks dude!

[@jonathanoutlaw8925]

Do u have to glue the gasket down with sealant

[@stockproductions7991]

I bought a 66mm Wiseco piston for my blaster and it is too small by .5 but my cylinder head still reads 66mm so a stock bore piston should fit right. So idk what I did Wrong

[@505fastlife6]

Is there a trick to putting the wrist pin clips in I can’t get it?

[@bikelife6998]

Good vid I need to do a top end on my 03 blaster

[@buffduckracing7721]

Thanks man!

[@logan250r]

I frikin love my blaster.

[@buffduckracing7721]

Haha. Sick man!

[@Kyle_gallegher]

Where did you get the new head and cylinder

[@generallegend0761]

My blaster is finally running

[@buffduckracing7721]

Sick dude!

[@romanvitucci8449]

Same I got mine running 2 days ago

[@kevinfitzgerald7340]

Planning on buying a blaster soon

[@buffduckracing7721]

Sweet!!!!

[@carpcarpenter2069]

Benchmade is where it's at fr. Quality and worth the price they cost!

[@buffduckracing7721]

Definitely dude! Love them!

[@davidcarrillo4804]

Nice blaster

[@buffduckracing7721]

Thanks dude!

[@randomvideos4939]

good job on getting a Wesco never get china pistons

[@tayloratwell4205]

Getting ready to show my 13yr old how to put in a new top end in his Blaster. He would like the knife 😁

[@buffduckracing7721]

Haha. Sweet dude!! You’re entered!

[@buffduckracing7721]

Congratulations man! You won the Benchmade mini-griptilian! If possible please dm me on Instagram “@buffduckracing” so I can get your shipping information. 💪🏽🦆

[@jonhenthorn1309]

I love blasters

[@buffduckracing7721]

Me too🦆

[@2strokeatvbro630]

Hey 👋 buffduck Ive been pondering 🤔 if you can just compress air into the cylinder will that make a differenceor make it worse I’ve seen people do it

[@buffduckracing7721]

Hmmm. I have never personally done it before

[@2strokeatvbro630]

@@buffduckracing7721 guess what happened today so I was starting my Yamaha blaster and I pull the choke out so it starts hitting the rev limiter until I popped it into gear ⚙️ even the kill switch would not work now I’m scared 😱 to ride it what should I do?

[@TayParks]

I have a question I have a blaster that’s not cranking .. rewirted everything need reeds cleaned the carbs and new sparks plug but it’s still not cranking ... the comp. test says 119 is that good comp. or do I need to do my top in also

[@buffduckracing7721]

119 is a little low but it should definitely run like that. 150 is where you should be at. I would make sure everything is clean, make sure you have spark and fresh gas. Keep me updated🤟🏽🦆

[@hondaguy425able]

Thats really low the book says 140-160 psi.

[@TayParks]

It was the top end … I blew it up again tho

[@johnnhhvjghjjiiiiv]

How did you do your heat cycle?

[@derrickkulesa4554]

Just did mine!

[@buffduckracing7721]

Awesome dude!

[@kaidenyt7056]

I hope you respond do you need gasket maker for a top end rebuild

[@buffduckracing7721]

I do not need any. Thank you though!! My top end rebuild went well

[@owenkrupa9985]

Gobble gobble

[@anthonyduffy9205]

Hi u r the best

[@buffduckracing7721]

Thanks duden

[@cameronmetz2283]

Yep my four wheelers queefing now I need new rings

[@hollister12598]

I’m rebuilding the top end to my blaster as well

[@buffduckracing7721]

Sweet man!!

[@scotthall8850]

Blaster!

[@colestella7856]

How often do you replace the top end of a blaster?

[@buffduckracing7721]

Whenever the compression is low and it’s hard to start

[@marytroyer3423]

heck yeah buddy buff duck on tik tok

[@randomvideos4939]

do you have oem or chinA CARB THERE?

[@buffduckracing7721]

It’s a China carb but she runs pretty solid!

[@greasemonkeygarage1896]

Remove the carb remove the exhaust remove the coil wire and the 4 cylinder base bolts... boom. Pull the top end out as an assembly.

[@joelboyd8302]

If there is a large gap would it rattle?

[@buffduckracing7721]

No, it just won’t have good compression making it lack power.

[@nicholasgreenslade8854]

I’m getting a 2001 blaster next weekend.

[@buffduckracing7721]

No way!! Sick dude!

[@nicholasgreenslade8854]

@@buffduckracing7721 thanks man

[@austint5672]

Tomorrows project for me

[@buffduckracing7721]

Nice dude! Have fun!

[@robertwinkler3985]

Just did a top end rebuild on my ktm 150

[@buffduckracing7721]

Sweet dude!! Those bike are so cool

[@jadenboeke696]

I just finished a top end rebuiltnon my blaster

[@buffduckracing7721]

Sweet!!

[@jberk6719]

Those griptilians are so reliable I was told

[@buffduckracing7721]

Yes! They are super nice!

[@kevinpriego8967]

What type of engine oil you use for your blaster ?

[@buffduckracing7721]

yamalube 10w-40

[@kevinpriego8967]

@@buffduckracing7721 i used valvoline 10w 30 full synthetic oil. I did some research and a few people said synthetic oil bad for the clutch. Is that true ? I rode the blaster for two days straight with it. I just got it running because it had a blow top end. I put in a wiseco piston and she rides like a beast but I’m worried about the engine oil I put in her :(

[@jillfinton1702]

Big fan from tik tok

[@buffduckracing7721]

No way!! Thanks man!

[@jermiahtroyer8494]

hell yeah buff duck on tik tok go now

[@juanser6873]

Great info..👍 is that an eBay cheap carb

[@buffduckracing7721]

thank you! Its not the stock carb but I'm not too sure where exactly it came from, Its world really good though

[@mikeg6247]

I just fixed my blaster to

[@buffduckracing7721]

Nice man!

[@lil_wheelie6599]

Let’s go 2k subs

[@buffduckracing7721]

Let’s goooo

[@ReaperJM]

I gotta do this on the weekend to mine (im13)

[@buffduckracing7721]

Awesome dude!!! Have fun 🦆

[@bruhbray147]

I need that knife !!

[@buffduckracing7721]

Entered!

[@timmykuebler13]

We need some videos on the 125 and kx100 (entering giveaway)

[@buffduckracing7721]

Yessssss. Soon soon. Entered!

[@strongberrygaming1532]

Bet

[@buffduckracing7721]

Big bet

[@garretttaylor9671]

Tacos and pizza are good

[@buffduckracing7721]

Oh yesss

[@gavinsmith82]

Yo I’ve been here since day one so I think I should get a knife. And I’ve shouted you guys out on insta.😂

[@buffduckracing7721]

Haha. You’re entered to the giveaway!

[@shawnlewis5772]

What motor oil did you guys use?

[@buffduckracing7721]

Yamalube 10w-40

[@shawnlewis5772]

@@buffduckracing7721 2 stroke right?

[@matthewlepage1788]

I'm about to get a blaster to race

[@matthewlepage1788]

Love the videos man

[@buffduckracing7721]

Sick dude!!

[@calebgeers3690]

you completely forgot talk about put the studs on the new cylinder, other wise good vid

[@joehuff2292]

Can't really see it moving but definitely can hear it smacking the wall.

[@angellambert4741]

Need to be dropping link to the parts you get or use

[@sullivangrott3041]

Just rebuilt my top end on my bike lol 😂

[@buffduckracing7721]

Sick dude!

[@travelguy1564]

That knife looks like it came from the dollar store!

[@life_ck1251]

You guys forgot to do the leak down test , it' probably got a air leak.

[@buffduckracing7721]

Hmmmm. I did not do that. She runs pretty solid right now though!🦆

[@mike9740]

I've never done a leak down test on my 97 or 03 blasters when rebuilding top end and no issues I only do it if rebuild bottom end or split cases

[@swift6540]

Yo if I could get that knife that would be sick

[@buffduckracing7721]

Entered!

[@clellwhite2957]

My new rings look a little to loose

[@gavinsmith82]

We should race blasters

[@buffduckracing7721]

Yesssss

[@jacoblotz1309]

I'm rebuilding a Yamaha blaster top end lol

[@buffduckracing7721]

Sick dude!

[@natedog2167]

Slobby gobbie

[@jamieconklin4946]

I have a 1989 Yamaha blaster I hope I win

[@buffduckracing7721]

Let’s goooo!! Entered

[@ridemachines9741]

Bro i need you to help me get mines goin frfr

[@buffduckracing7721]

You got this man!💪🏽🦆

[@ridemachines9741]

Bro I'm trying to get my KZbin going i have account already man just subscribe for me