How to rebuild cylinder head at home K20 iVtec

[@applesyo]

Best tutorials on KZbin hands down

[@UNIQUEGrills]

Apples yo Thank you. I’m trying..

[@bseries8826]

Thanks for taking the time to share with us. Excellent job by the way

[@papergatorzfedducca7998]

Anymore 3.6 builds left??😂😂😂 I loved that series!!!

[@UNIQUEGrills]

Long gone 😂🤷🏽‍♂️

[@papergatorzfedducca7998]

@@UNIQUEGrills I just changed my timing chains, phasers, oil pump, crankshaft, rod and main bearings, but I didn’t change the pick up tube seal and it’s giving me low oil pressure.🤦🏿‍♂️🤦🏿‍♂️🤦🏿‍♂️ i reused the old pick up tube seal so I have to drop the oil pan and change the pick up tube!!! My oil pressure is at about 5 psi and the lowest spec is 10 psi. I BOUGHT THE CAR FOR $2000 with rod knock. It’s a 2010 Camaro.

[@UNIQUEGrills]

@@papergatorzfedducca7998 you gotta fix it asap.

[@papergatorzfedducca7998]

@@UNIQUEGrills ok thank you bro!!! I had been letting my wife drive it up the street to work and back until I can get to it this week. You think I will end up damaging the crankshaft again? I probably need to stop her from driving it until I can change the seal right??? Do you think the seal is what’s giving me that much low oil pressure?

[@UNIQUEGrills]

@@papergatorzfedducca7998 you can start with seal. But you need to stop driving it for sure. You can damage everything.

[@HarryPNess-lu1lf]

damn i look forward to these vids! keep it my dude!

[@chasedunk3278]

Bad ass video I really enjoyed it thanks for the info

[@UNIQUEGrills]

Thank you

[@sabz_bhp]

Quality man

[@gregorybutcher9555]

Great video and very intuitive 🙏🏽 but just the music ruins it

[@UNIQUEGrills]

It’s almost impossible to find music everyone likes.

[@caseyholder5850]

A little heavy on the lapping, but otherwise a great tutorial.

[@seanpacheco6121]

I got question, intake valve spring is taller than exhausted valve spring right?

[@allegedlystock3033]

Was this on a stock motor? Would you not recommend reusing valve/springs and retainers on modified cars that will be driven harder?

[@UNIQUEGrills]

Bone stock. Only recommend to modify springs and retainers if you use big aftermarket cams.

[@alitoroganan2442]

@@UNIQUEGrills what about stock cams just boosting the car, do i need to upgrade the valve springs

[@UNIQUEGrills]

@@alitoroganan2442 Yes. Please upgrade

[@rayclaudio4141]

You're awesome 👌

[@TooDiffRell]

Hey what grit where u using to port?? And what u used to clean the side of the head gasket

[@Kasvain]

subscribed, great videos

[@eghatchsosa]

Hey whats up bud did you really end up selling your hatch? Did you get a new car? Im guessing you going k series now.

[@UNIQUEGrills]

Hatch sold. I got no plan yet but I bought nice stock CRX that I will be restoring. So will see what happens.

[@vtecbrown]

What are you using at 7:20 to resurface the bottom of the cylinder head?

[@sabz_bhp]

Leak test using gas but you use water? What's wrong with using water

[@UNIQUEGrills]

Gas is thinner

[@sabz_bhp]

@@UNIQUEGrills gas as in petrol right? Sorry lol UK over here

[@UNIQUEGrills]

@@sabz_bhp Yes

[@victorortega5158]

Nice good job ..

[@chayneyshuck5503]

Followed exactly and it still leaked. It leaked less but still leaked. Any tips?

[@UNIQUEGrills]

Try again. Take your time

[@chayneyshuck5503]

@@UNIQUEGrills Will do! Thanks for the reply. You got a new subscriber!

[@enjoytheride_cz]

What did you use at 7:10 for flanch?

[@UNIQUEGrills]

It called Norton Machine Knife Stone

[@enjoytheride_cz]

@@UNIQUEGrills Thank you very much!

[@rayclaudio4141]

Lol how much to rebuild my f22c1 head 😄

[@UNIQUEGrills]

You can do it

[@rayclaudio4141]

Bro you need to post more!!!!!!

[@rayclaudio4141]

Dude you really know how to keep us entertained and we learn alot from you...

[@chriswheeler5150]

Music sucks