How to rebuild Fuller 18 speed transmission

Rebuilding a Fuller 18 speed transmission. This is a short video showing off what it takes to completely rebuild a Fuller transmission back to original working standard that meets or exceeds the manufacturer's. We rebuild all heavy duty transmissions from all brands such as Eaton, Dana, Spicer, Rockwell, Meritor, ZF and many more, so if you have a question or need our services, please give us a call at 1-877-776-4600 or visit our website at www.progearandtransmission.com

[@eranjones5994]

Do us a favor, on your next video please leave out the Disco drum music. Do you really think people with an overhaul on the mind want to listen to this?

[@Sinister_Reaper]

Turn off the volume, problem solved

[@coreybrinson8171]

He does? And isn’t he doing the same thing?

[@pallee3971]

lol that top counter shaft is a little hard to get in with the pump gear installed ,but I have a tool for that :)

[@FirstLast-ze7sl]

that music doesn't just suck it really really sucks

[@yardlimit8695]

i couldn't have said it better..........

[@oldpete3153]

As a 47 yr's trucker/mechanic, I have no fucking idea what the point of this video was !! %$*&@$#% 😡

[@justinsalter3755]

amazing how the countershafts were laid in and as if by magic the main and counters were suddenly all set up ,coool

[@CosgroveNotts]

I agree. Lol

[@douglasfurlong1]

@@CosgroveNotts stupid title for a video..should have called it watch magically how a transmission rebuilds itself.

[@Watchyn_Yarwood]

Great video, glad my mute button works!

[@johnpetrov6602]

Orange paint adds a couple of horsepower.

[@dwhat6603]

That's not an 18 speed. It's a 13. Look at the shop knob, and you didn't even show how to build the main shaft, installing the roller beatings, timing it, or building the rear section. So you really didn't show a damn thing on how to rebuild.

[@TuffBurnOutTeam]

That's so true he didn't even show any one how to time it

[@davidwinfield730]

you didnt even show anything, you skipped most of it.

[@joeyboland3406]

What do you expect in 7 minutes?

[@yardlimit8695]

@@joeyboland3406 true,,,,,,,,,,,so then the video was a waste of time......not impressed at all.

[@joeyboland3406]

@@yardlimit8695 yes it was a waste of time. There is no point in putting together a 7 minute Fuller 18 rebuild video, unless you are just jam packing all of the important information (which obviously was not the idea here)

[@KL-df9ht]

oh come on, it showed him fighting a counter shaft and it showed him fighting the aux trans, lol

[@harrykrumpacker871]

WTF does ANYBODY go through the trouble of making a potentially informative video and totally SCREW IT UP by adding needless background NOISE?

[@PatrickBaptist]

This isn't a how to video, it's a video of you doing some work with some lame music. A how to video is when you are explaining how to do something.

[@bellidoify]

2:04 OUCH!! crushed fingers.

[@MrRingo359]

Watch those fingers! Looks good cleaned up and I'm pretty sure the PTO was the leading reason this trans went south to begin with. Nice advertisement for the shop.

[@markopolo286]

MrRingo359 why do u think that

[@spankyroberts685]

To bad that's a 13 speed I can tell by the air system 18 speeds don't have a 5/32 air fitting on the high side hose of the a-5000 valve. And he built that the hard way

[@joshuacrippen8425]

Spanky Roberts Right it so much easier to build it with the input shafts down . You don't run the risk of the counter shafts falling on your fingers.

[@g.jeu.2187]

As a DAF mecanic, I can tell you, he is not showing his secrets. He is not crazie, he will do it for you. Thats his job.

[@CosgroveNotts]

As a daf mechanic I don't miss these on the daf 2800 and 2600

[@yardlimit8695]

@@CosgroveNotts what is a daf mechanic

[@wanderingfido]

DAF is a British Cab-Over-Engine truck make like Volvo.

[@person440]

How about the 3 hour struggle with the main shaft and circus music ? lol

[@joshuayarbrough6269]

Fuck that gasket i guess

[@wackyninja9259]

Not really a "how to" if you don't explain anything and put music over the whole video

[@yardlimit8695]

RIGHT,,,,,,,,,,,so why bother watching this junk if you can't learn something.

[@chuckmarquart]

Cut the stupid music

[@signal44]

I don't think this was his first one , not even his first one that day.

[@dehuynh5483]

signal44

[@JazzyJasTruckingzz]

De Huynh

[@g.jeu.2187]

2.07 AUW... !!! Fuck..... I know how it feels.

[@kerryblair1068]

you guys do good work the video was not to show how ,,,,look forward to meeting you and dan bringing mine down from tn because of the quality work and getting it done right ,,

[@michaeldunagan7838]

Annoying background noise prevents me from giving a thumbs up. The seeing a rebuild keeps me from giving a thumbs down.

[@homen_6.6]

This video showed me how badly I don’t want to go to work on Monday cause I do this shit for a living and you skipped everything watching this vid sounds like I’m walking threw a strip club

[@eri197395]

Solo mete las piñas no explica cómo armarla paso a paso voló el mexicano el di dises paso por paso un maestro si yo entiendo que no le da tiempo por que es poco en el video pero que tiene se hacen tres videos

[@crusiethmaximuss]

This fuckin' music!!! 🤣🤣🤣

[@mailnegro677]

🤣🤣🤣

[@josesergiogomez2980]

En mexico se ajustan los trenes latrales de la trasmicion auxiliar por ke aki no se be el ajuste

[@rafiekahmed8568]

What a waste of time you didn't explain anything you could have at least explain how to set the timming on the two countershaft the music is inappropriate to this video

[@johnplatten8793]

It's almost been what 4 years since I've build one miss doing this stuff

[@donmunro144]

That wasn't a rebuild video. It was a bits and pieces assembly video

[@DamagedF0X]

You skipped the annoying part of putting in/timing the mainshaft.

[@mack_titan]

ok, I have to say this. 2:54 the gears are not seen and 2:56 all gear are installed? Why did you cut that important final gear assembly out?

[@douglasfurlong1]

you skipped some steps...if your going to make a video do it right!!

[@SuperVictordiego]

Very bad video because it is not shown when the transmission is synchronized

[@donkmeister]

I honestly thought an Eaton-Fuller transmission would be bigger than that - it looks like a very space-efficient design though. What are the yellow position marks on the gears for? Do they need to mesh at a specific point to make sure everything else meshes properly?

[@roundsm18]

Timing

[@eddiebartholomew9172]

Yes the countershafts have to be in time with the main drive gear.

[@tommyturner7858]

very nice. much respect to the builder.

[@carlawilkinson2098]

thats a 13

[@cabinfever7590]

+Carla Wilkinson Yep, you are correct, the high side main line (the big black line)., is "T'ed", 18 speed is not. I didn't see a good pic. of the aux. splitter gear but an 18 has a bearing and a 13 has a washer set up.

[@RC-Heli835]

If driving doesnt pan out for me Id love to build these big transmissions.😀

[@Grakmaw]

I been doing the same thing for years this guy is actually doing it wrong

[@awashbowler]

I wonder how this guys still has his fingers...

[@mistercheckdiesel1696]

buen video amigo!! aprovecho para decirte que te pases por mi canal salu2 :)

[@miguelangelvillacuraneira3698]

the porn music jajajaja

[@daleolson3506]

Music sucks

[@jameswyatt9472]

Liked it

[@egancraneriggingservicesin9142]

My hands hurt watching it

[@charlieabbot3649]

All these negative comments by Johnny Honeowers wanting to rebuild their 13s in a garage. Timing? Bearings? Learn your limitations. Drop the Damn thing off at this dude's shop or open your own shop. Great video showing how complex the operation is.

[@brenthill3241]

Nice trans. Third circle in hell for the sound engineer. Thumbahs down da da da da click click bada brrrr pip pip.

[@daviddownie3431]

Can’t understand why people think they need to put music in videos. Hell, even MTV don’t do that anymore.

[@danieldesart4210]

This is a different way of building an RTLO**913A transmission. I personally don't prefer to build them on end. The rookie mistakes in this video though 🤣

Video hay quá bác

[@pedropuenteortega107]

Disculpen mandé ajustar la transferencia de la 18 pero la pusimos y no entran las altas alguien me puede decir ya cambie el módulo del cambio y sigue igual

[@God-rw4xp]

Honestly, it depicts the purpose of the video if u only show the part everyone can do.

[@jorgeadalbertohernandezrey8119]

mal video no explicas como sincronisas los piñones de un solo saltas a armarla mal maestro

[@zsoltlukacs8438]

16 speed zf acosplit the very best.i drive one m.a.n. f2000 truck.zf trans rebuild 1600000km...100000miles...but not pull just 46000 lbs!pull 78000lbs load weight!

[@AmandaM-t9e]

This video is not a "How To Rebuild", more like "Watch me rebuild without instructions with russian music"

[@jesse1298]

If this guy is a good teacher I’m the king of England

[@RW-kd4gx]

Hack

[@wanderingfido]

Why doesn't Eaton use syncromesh (brass rings)?

[@nfarnell1]

you missed all the good stuff and the swearing, I'm guess that is the reason for the stupid music.

[@tuesday6433]

if i worked there all my fingernails would either be black and blue or gone, how that guy drops then countershafts in without sacrificing his fingers at the first knuckle is beyond me

[@garethifan1034]

Goodness-this was interesting even if only for the fact that we haven't seen this kind of Transmission in Europe for at least 25 years..

[@Bigmike3406E]

If you don’t time your gears right it will chew itself apart but quick!

[@CosgroveNotts]

Not seen or worked on one of these for 30 years thank goodness. Much prefer ZF AS tronic. Fit and forget and no clutch replacing either. Let's have an easy life instead of rolling about on the floor messing with primitive gearboxes, clutches and that stupid stick thing with 5/32 air pipes. Glad we've moved on.

[@romeomatadi-mushipe8946]

how does it work....especially on high/low range & splitter???

[@dannyyo7948]

i came here for the good beats!!!!!

[@apaulothegreat1581]

Not a very good video for how to put a f****** transmission together

[@gregorylopez7711]

HEY!! You did a good job body thanks for showed this video GOD bless you

[@upaginit]

Shouldn't say how to rebuild in title, should say this is what it looks like lol

[@shumcr]

now if he was listening to some speed metal he could have done it even faster

[@jasper1064]

What is this music? Wanna be deep house? smh.

[@campos.cpa.com.brsales8956]

Boa noite meus amigos que estão ai juntos neste momento maravilhoso e eu vou ter um imenso prazer em compartilhar com todos vocês. Um abraço e que Deus abençoe a todos.

[@mauricioglez8494]

Muy Bueno Gracias por compartir,,

[@loyd5171]

pinched your fingers didn't you?

[@wantapgt]

Pinches his finger and has to step away.

[@bushwacker3292]

Ya I was watching but miss the part about timing it ?

[@howofasttransmission5118]

好

[@CosgroveNotts]

Ancient engineering. You don't strip gearboxes anymore and no one uses fuller. Is this Murica and still in the flower power era?

[@andrewlynn5323]

cosgrove notts if they don't use Fuller, who do they use??

[@upaginit]

Shouldn’t say how to... lol should say watch me build a 13 speed

[@upaginit]

For a peterbuilt even lol

[@patrickcriswell9390]

i can improve your assembly times with a few tricks of what you did show. nice cleanup and paint job.

[@poppy-77]

Post a full vid of an eaton 18sp rebuild if u haven't

[@ronaldocardoso7084]

Pra começar ,uma amassada nos dedos ,pra ficar esperto

[@amdsemprom]

2:03 ouch, that hurts ;)

[@bellidoify]

Creepyguywithphone1324 haha!!

[@billsmith8739]

The music is annoying!!!

[@renzochoquena1382]

porque no pasas el armado completo

[@mitreswell]

Looks like a two man job to me.

[@lourivalteodoro7763]

Muito bom,só faltou mostrar como montar o conjunto Central ou conjunto de engrenagem móvel

[@solidgoldeazyaction]

I wonder how they get so clean

[@donvalharris9819]

Now that's precision engineering

[@jjsc4517]

como faz pra pôr no ponto as engrenagens?

[@rec5913]

Trasmisión 169-18 👌

[@2131400]

l have problems with the splitter on my 18 speed l can go hi to low and vice versa but I can't split the gears to get the full 18 any suggestions on what the problem could be thank you.

[@anthonybryant4107]

Take a look at the synchronizer in aux housing. Could be worn or damaged.

[@andrewlynn5323]

Columbus Christopher the splitter sliding clutch is worn out. That would be my guess

[@canadaking]

Music is so knowing

[@injecteurprecision]

he squeeze is fingers ha ha ha the shop look dirty

[@pardzthaga.crossing9059]

yes it is

[@redblue40rc33]

3:45 banged up gasket

[@marcostorressaavedra1868]

lo más entretenido fue cuando te apretarse los dedos.....y gracias por mostrar la puesta apuntó...poco educativo te pasaste 💅

[@bachirhamel1864]

شكرا

[@aggabus]

2:08 walk off..

[@ryanfahey7291]

art

[@howienyb4331]

Whats cost

[@twbcca]

missed a lot nof sreps

[@twbcca]

2 counter shafts one man

[@just1lifexx11]

deadly and good

[@justdiesel6153]

Male video no Elena nada

[@mauricioglez8494]

ok "

[@abidsulngi7942]

Hi

[@tjr7729]

I can build it faster and better , not to mention that's not an 18 speed it's a 13 .