How To Rebuild Truck Manual Transmission || Restoration Of Truck Gearbox

[@user-sw7kl5tk5e]

капитальный ремонт грузовика в полевых условиях. респект и уважуха этим ребятам работягам.

[@grimmw3632]

Здорово, когда не понимаешь, как должен происходить ремонт - кажется, что всё происходит по технологии и правильно. По факту на видео дикий колхоз, грязища и пыль. Судя по тому, как резво они это делают - делают они это не первый день, в этом случае не ясно, что мешает обзавестись хоть каким-то нормальным инструментом и - ВЕРСТАКОМ! Насаживать холодный подшипник молотком - тоже отличная идея! Менять колодки в тормозном барабане - да кому это надо! Грузовики после их ремонта видимо обратно к ним и возвращаются - далеко уехать не успевают.

[@Андрей1883]

Какие полевые условия?! Это элитное СТО и все работы проводятся в заводских условиях.

[@АндрейПар-т3о]

Это участь тех ,кто считает что может все сам и технологии нам не нужны!))

[@southerncross179]

I enjoyed watching these guys tear down the doohickey so effortlessly and then put the whatchamacallit back together again. Great job, fellas!

[@JavaMike71]

What is really cool to see is how they all step in to help and do their part with getting this done and get the truck back on the road. It obviously makes the job so much easier when you have all hands in on it. Quite impressive and they are all smiling while doing it.

[@johnparungao8481]

These people must be a family. They work in sync. They probably work better if they are provided with a work bench. Great job.

[@horstmuller7512]

Workbenches, tables, chairs and also toilet bowles are forbidden in Pakistan.

[@nunyabuziness8421]

Hard to say they all look the same 😆

[@Qusin111]

@@horstmuller7512 there is clearly a table in the background, I assume it is decorative ;)

[@horstmuller7512]

​@@Qusin111 Hm, tables are realy rare in Pakistan, just as toilet bowles. Maybe the uses it instead of it?

[@Одинокий-ц8э]

Надо коробки моторы тоже разукрашивать цветочками, тогда ломаться не будут

[@tancirevlexa1977]

Молодцы мужики,хорошая слаженная работа!!!Дай бог вам всем здоровья!

[@иваниванов-з8с1з]

какой то единый организм с количеством рук большим чем щупалец у осминога. У нас бы недели две делал самый шустрый сервис

[@and23229]

мне нравится,что там много пацанов и то с каким увлечением они няньчат железяки.

[@πςέ-ω5η]

Автосервис на коленке 😁😁😁

[@πςέ-ω5η]

@@иваниванов-з8с1з и тут также, просто сьёмка ускоренная!

[@Андрей1883]

Дай Бог водителю, который на этом поедет....

[@ALFAshizik]

Пакистанцев зауважал! 👍👍👍👍👍👍 Работаю слаженно дружно один затягивает другой наживляет как муравьи. 🙂🙂Красавчики!!!!👍👍👍👍👍👍👍👍👍👍

[@theawesomeskills63]

Thanks for coming on my video 😍 also thanks for your precious appreciation 🥰 visit again on my channel for more interesting video's 🥰 love from Pakistan 🌹♥️

[@bze8368]

Изумительно работают молотками. По железу. Феерично

[@senchoprosto8602]

прям миньйоны)

[@simonfuller7331]

Local Kenworth dealer: 'we might be able to take a look in about three weeks' These guys: 'hold my beer!' Just wonderful to watch this team work !

[@СергейСергей-щ8ж2о]

Ну вообще разборка и сборка на коленях без приспособлений вот это парни у нас тоже водители на трассе разбирают и собирают все механизмы и в мороз и в дождь на трассе всем парням здоровья и не ломаться

[@antoniomontana2232]

В коллективе все знают свои обязанности. Модель коробки удобна в сборке, разборке- первичный вал монтируется легко.

[@user-dw7bw3qz2q]

При ремонте коробки абразивная присадка в подарок😁

[@mitkasan8915]

Это притир такой))

[@waprobin]

Оооо, этот хруст песочка в масле...

[@НиколайШабалкин-г1п]

Молодцы и молодежь работает.Удачи вам........

[@giorgiobassi9078]

Sono. Atleti...👍💥💯👀🇮🇹🎉🎊👍

[@allen3272]

You men rock in my book! Great job. I rebuild transmissions here in the USA.

[@جبريلحمدهاديعاتي]

اصلاح ناقل الحركه بأدوات بسيطه بدون مفكات متطوره وبدون مكينة كبس عمل رائع جدا جدا اتمني لهم التوفيق

[@bernardpimentel8716]

Though they don't have the special tools ,i admire the way they do their jobs.

[@vadimjcb3cxmurmansk]

Какой то супер мастер все тряпкой протирает. Обычно с песка берут и вставляют

[@hoffmann646]

Да у них там по ходу все только на воле Аллаха и работает...

[@ivan_filimonoff]

то был обычный автосалон, а с тряпкой - это люксовый!

[@halopiotrmovie7623]

Naprawa polegała na rodzinnym myciu skrzyni?

[@Michael-en6mz]

Footage must’ve been shuffled, they clearly replaced that input shaft bearing retainer but the old one popped up towards the end. Amazing how clean the inside of that case got with some scrubbing. I always enjoy watching these guys work. The apprentices are always paying attention and everyone knows the drill.

[@Slimerancher69]

These guys work very hard I'd like to visit Pakistan someday.

[@theawesomeskills63]

Most welcome bro♥️🌹

[@chernoveugen]

Прогресс! На картонке работают, а не в песке

[@ЕвгенийКравченко-к3д]

У нас лучше что ли век бокса не видел Всю жизнь на улице в грязи по сей день

[@malcomx7115]

Sanki rusya daha iyi rusyda köpek gibi yaşiyorsunuz

[@EgoriyVlasov]

@@ЕвгенийКравченко-к3д, это ваш выбор, раз всю жизнь так работаете. И да, лучше.

[@garagegrunt8154]

Team “No Lube” for the win! On a serious note, this is impressive. Not a single snap on tool in sight, got to love the knowledge and skill here!

[@raymeus]

I love snap on but have been hearing negative stuff about hassles when tools are broken to get replacements and quality not as good as Mac tools.

[@АнтонПеревощиков-б3г]

Следующее видео, операция на открытом сердце, теми же людьми и теми же инструментами, автор? Не верю

[@Alexey381]

отличная работа☺️👍

[@dmitrijdudkin5433]

Хорошая работа!

[@ИльдусКильмухаметов-л6г]

AlhamduliLlah, from Russia. ✌👌

[@theawesomeskills63]

🌹🥰

[@davemark8684]

Amazing job guy!!! These are the type of mechanics we need here in Canada. Try telling mechanics here to tear down and rebuild a transmission with no power tools and no fully loaded, air conditioned shop to work in. The industry desperately needs more guys like these

[@theawesomeskills63]

Thanks for comment on my video😍 and ur precious appreciation for these hardworking boys,actually these mechanics belong to lower financial class families they do work day and night for the sake of just some food ,they are very honest with his work ,even they want to go other country like canada ,America but unfortunately they have no opportunity and financial support .

[@theawesomeskills63]

Thanks again and again for ur precious time visit again on my channel for more interesting videos😊🥰

[@ting2222]

Why would you want to go back to history? They have good working environment now with advance tools. Get the job done quickly, efficiently, hopefully with good pay. I am sure you want the same thing for you and your kids, if your son happens to be a mechanic. You don’t want to wipe your behind with newspaper, in the forest, right? Because million of people around the world still do that.

[@gordonwelcher9598]

So they have to overload the trucks to get the job, then drive a dangerous vehicle to make money. After that they have to pay for repairs. Not an ideal system.

[@Andrew-iq5ud]

Youre importing a million a year ensuring your children will grow up in a foreign country. Congrats bro!

[@PPPDCO]

Glad to see that at least on this project they are wearing their safety flip-flops.

[@richardcrowell284]

Budget repair, I could guarantee in the rest of the world that by the time the box was rebuilt it would have a parts list as long as your arm. Bearings, syncro rings, input shaft and housing etc etc. Don't forget the environmental levy and workshop consumables.

[@i7gabber]

14:39 динамометрический ключ )))

[@marceloevera2009]

lol

[@Скорняк-у9я]

- с каким моментом затянул? - да, моментально.

[@richarddawson7584]

Just goes to show that you don’t need a flash workshop to do a good job. Great work fellas.

[@whitefox9]

Don't make stupid remarks That's most probably a return job as dirt caused the bearing to pack up

[@jakelaughton683]

That gearbox isn’t going to last two minutes. There was a lock nut holding all of the gears on one of the shafts and they tightened it up with the end of a set of stilsons. It will be back in 6 months.

[@bobp6742]

​@@jakelaughton683 That's why they are so quick, they've done this gearbox 50 times before.

[@gordonwelcher9598]

I like the trucks painted in rainbow colors and that the employees are allowed to wear dresses.

[@bobp6742]

@@gordonwelcher9598 🤣🤣

[@ederroyo1207]

Muito bom o trabalho de vcs, com poucas ferramentas fizeram tudo acontecer. A união de todos é impressionante. Parabéns!

[@GordiansKnotHere]

I always admire the fact that they are practically barefoot, working around heavy machinery and it appears they still have all their toes...

[@theawesomeskills63]

Thanks for coming on my video 😍 and also thanks for your precious appreciation for these hardworking guys .. visit again on my channel for more interesting video's 🤗 love from Pakistan 🌹♥️

[@555KANAL]

Судя по звуку компрессор точно у них есть и он работает😆👍

[@ИльдусКильмухаметов-л6г]

As salamu aleikum, djamaat. ✋🤝 Love you, from Russia! 😉

[@simons5193]

Absolutely amazing. These guys are such a great team and work in sync so perfectly and so fast. It looks like they repaired that transmission in a matter of hours. I had to rebuilt my car's transmission here in the US and it took almost 4 weeks. I should have taken it to Pakistan and fixed there. It would have been much much quicker. Well done guys.

[@kashkot2572]

That's true Simon S. The truck didn't even lose that load.

[@vietvu129]

Same here... 4 weeks and counting. LoL

[@moto9618]

If you want to live, know how to spin. This is such a saying. Guys are definitely great!

[@gregjones3660]

This is West Texas one year after Biden “took” office…

[@1202burton]

This wasn't a rebuild, it was a repair. Only 1 or 2 balls of the bearing were destroyed, it's always the top bearing to go first as it's the 1 affected because of low oil ie; leaky transmission gasket caused this problem. And by the looks of it, it will more than likely fail again for the same reason. I build these every day, it doesn't take 4 weeks, 2 to 3 days at most and that is waiting on NEW parts, the actual labor to replace input bearing is 11 hours to remove trans, inspect trans, clean and reassemble and reinstall. If i had 5 helping me, it could easily be done in 2-3 hours. And you would get a warranty. 5 years /50,000 miles parts and labor on a rebuild, 10 year/100k on a new replacement. To all that commented " no need for all those fancy tools, lol, those fancy tools get it done right, bearing pullers and bearing installers are not a gimmick, and there are no substitutes, i doubt there is a dial indicator within 100 miles of this place, which is necessary for setting end-play and making sure races are installed right. Cleaning it in that way only makes it look good "kinda" i guarantee if i cleaned that same trans after they reassembled it, the magnet in my steamer would have at least half a teaspoon of fine metal shavings stuck to it. These guys are working with what they have"which is not much" but still the scraping of machined gasket surfaces with a knife leaving multiple scratch grooves "leak makers" hence the use of silicone as they ruined the machined gasket surfaces no torque wrench an not using a torque sequence and beating on bearings and bearing races with hardened steel is a big no no. We have a saying here, if you think an using a expert is expensive, wait until you use an amateur.

[@peter8488]

Please take care to keep your hands from contact with the cleaning solvents, please.

[@aagalani]

It's probably Kerosene. Not sure how harmful it is.

[@carbpumper]

Or gas

[@onlywatching6504]

Most likely diesel fuel. But i agree, i had my «dose» during the years. I’m glad im alive and kickin’

[@ЮраФатеев-ч8ь]

Похоже Карабас масла шибко много не видел.

[@ЕвгенийГусев-д6ы]

МУЖИКИ, с большой буквы!!! Просто . молодцы ребята!!! Здоровья ВАМ и ВАШИМ семьям!!!

[@Андрей1883]

И водителю, который на этом поедет😂😂😂

[@jbanuelos7388]

I like the way these guys work They work together! As a team.

[@theawesomeskills63]

🥀

[@HowDoYouVideos]

What is average or guess on price to fix there? Amazing work

[@gustavosoto8644]

I still love watching you guys work!! This is my morning coffee

[@theawesomeskills63]

Ahh😍thank u so much 🥀

[@keltar4071]

With all the extra parts that will be leftover they'll cast a whole new transmission.

[@kristoffscuba5466]

The way they beat the races in with a hammer is just incredible. We’ve seen you guys have large bottle jacks, we’ve seen you guys have stick welders and angle iron. Would someone, anyone, please weld up a basic 20 tonne press and stop pounding on bearings with a hammer!

[@lm4278]

They can't. They are brown people. They do not have the mental ability to freely think like that. They continue to docthings they are shown instead of innovate. In other words... they are not capable of higher thinking. They may be able to take this trans apart and put it back together.. but that's just repeating what you've been shown. Not the same. They need a White Aryan to show them and think for them.

[@andresbonet2011]

me gusta ver esos jóvenes trabajando con tanto entusiasmo 👍👍 Acá en Argentina los pibes prefieren mudarse a otro país antes que ensuciarse las manos

[@binladenalv]

Imajinese cuantos machuca es no se an dado en los dedos de los pies en muchos videos salen unos ke no tienen dedos por amputaciones bro unos zapatos de caskillo les resolvería la vida

[@rosanapascoal7747]

Admiro voces. Excelente trabalho

[@Vitoandolini13]

Amazing their tool box is neater than mine

[@MegaGQ1234]

Your guys are a genius god protected your all my brothers🙏🙏🙏👍👍👍

[@theawesomeskills63]

♥️

[@linsayhenry920]

Were any of the gears replaced. I noticed a few gears with wear.

[@raymeus]

Throw out bearing looked trashed , no steel toe work boots , amazing . Maybe driver was playing that song......Grind them if you can't find them. Lol

[@viktor2735]

.....накуя было разбирать всю коробку если было сразу видно что полетел подшипник первичного вала ??

[@skaileep]

Рекламация

[@jaleger2295]

Для красивого (нет) видео

[@nonconformist3039]

Ты в курсе, что такое ревизия механизмов.

[@АлексейКоляда-з3п]

Тут суко оправками запресовываешь подшипники, боясь на них чихнуть, а этот куярит по наружной обойме подшипника! Главное у них это помыть!

[@ЕвгенийОстровских-б3р]

Бронза дифицит

[@jaleger2295]

Абсолютно такие же мысли. Сразу видно, по вашему комментарию, что человек понимает о чем говорит. А не дилетанты тут в комментах, кто улюлюкает "какие молодцы" на это видео с ужасным ремонтом

[@ИванКорда-э4ы]

Может ты шибко кромка чихаешь .

[@АлександрТимофеев-м6с5м]

И ветошью протереть.

[@bmd1825]

Love watching these guy’s......👍🏻🇺🇸🇺🇸🇺🇸

[@theawesomeskills63]

♥️🌹

[@tjahyosubekti6519]

Good job, but you have to show to us what spare parts are to be replaced. Bravo

[@StevenSeagull6969]

Great video, but after all that work they didn't even show them installing it back into the truck. The best part would have been the truck driving off with its new rebuilt transmission.

[@hippielewis4768]

Didn’t like tighten bolt with pipe wrench-then what do I know

[@henningpieterjordan7416]

Nice workingshoes...!!!!

[@wwjoshdew]

very resourceful!!

[@alainroche1086]

Je suis impressionné, bravo à ces mécaniciens qui travaillent avec rien.

[@tonyb8660]

tripped me tf out when the munchkin voices came in. Unreal. Hard labor. Damn.

[@eliassousa7442]

são bons mecânicos mas só falta uma máquina pra soltar os parafusos mais rápidos

[@jimmydickson8854]

You get broken transmissions because they load their trucks up over weight ,but very skilled crew in repairs well done,though the repair area is a bit basic old jimmy Aust

[@АлександрСелезнев-к9э]

Если им продать ключи с трещетками, то они за ночь смогут полностью разбирать и собирать автомобили

[@НиколайД-е7й]

А толк? Поменяли только подшипник первичного вала.Стакан выжимного оставили сколотый,подшипники и шестерни с синхронизаторами тоже старые.Зачем разбирали всю коробку?Сняли бы стакан и вытащили первичный вал и все.

[@user-sk9hl7si7l]

@@НиколайД-е7й проверить всё

[@sikorik9964]

Far out man these guys talk just like the Minions😉

[@자운영-k2l]

👍대단합니다 korea

[@michaelboortz8927]

Hard working people always find a way!

[@soonerlon]

I really love watching these guys - they blow the hell out of "flat rate labor". Love to know what they charge for the repair - in the U.S. this would have been a $$$$$ repair.

[@jakelaughton683]

It might be economical in terms of cost to repair vs replace, but they gearbox isn’t going to last long at all. If you account for the time spent off the road, a replacement is probably cheaper. They did a lot of things wrong during assembly that will cause problems in service. They even dumped a tub of additive in it at the end to presumably cut down on noise and make it feel smooth for a while.

[@patring620]

They reused broken parts? That collet shaft sleeve (guessing at the name) in the bell housing was broken at the beginning and they are assembling it with it at the end. It looks solid, but surely stress, heat, or vibration will cause continued deterioration.

[@bobp6742]

Surprised not to see a handful of sawdust get thrown in as well, or it's done off camera

[@safeguard4854]

Палец - самый лучший толщиномер при нанесении герметика!😁😁😁

[@БакинецЛёха]

И шпатель

[@giorgiobassi9078]

Vero. 👍👍👍👍👍👍💯💥😎😁🇮🇹

[@onlywatching6504]

They have skills. And the work contitions are great. Good light, perfect temperature, perfect ventilation and no hysterical female «supervisor» running around and making life miserable.

[@fazelsheikhi6839]

thank you for video pls tell us which country are you and which city thankyou

[@theawesomeskills63]

Pakistan❤️ ,Punjab

[@joaquintrejo3714]

me gusta como trabajan en conjunto son unos chingones

[@leoleo9254]

У какого-то есть ключ с трещоткой, а в Пакистане есть куча людей рожковами ключами

[@ismaelbarba9384]

Son chingones esos mecanicos, aqui en mexico valen ver...son sirven para cobrar y muy caro y no arreglan nada....

[@mohamed.boudiafaberkane680]

هذو الرجال تاع الصاح قادرين اطلعو لبلاد يسحقو تقدير. والاعتراف. شكرا. الاكوم

[@broadsmilemissmagootewkesb5799]

It's those brilliant blokes in flip flop again.

[@ruicosta5765]

Pessoal de trabalho. Muita sorte

[@dwdhb9905]

Did it work then ??????

[@Greggg57]

Very impressive workers.

[@raymeus]

Thats how i used to wash parts in the solvent tank in the shipyards , no gloves , come to learn it was very toxic , goes to internal organs. My buddy worked in the prop shop , doing prop repairs , they used bondo to fill all the imperfections and he would grind away no mask on , he died of cancer , very young.

[@SanteyGarage]

Збс он вторичный вал разпрессовал😁

[@barrybray1839]

THESE GUY'S NEED TO BE GIVEN A CHANCE TO WORK WITH A FORMULA 1 TEAM...👍

[@stevenhird1837]

😂😂😂😂

[@davidpieratt]

How to repair a manual transmission on dirt

[@sukrudinc6347]

Parçaları yıkamak için bir fırçaları bile yok !takım eksikliği var ama yinede helal olsun büyük iş başarmışlar

[@OstapRK]

Как я понял замена подшипника первичного вала, много ручной работы голыми руками, подозреваю это бригада по ремонту кпп.

[@theawesomeskills63]

Yes, you are right it's team work.

[@theawesomeskills63]

Thanks for coming on my video, 😍 must visit again for more interesting videos 🥰🥰

[@ДмитрийАфонасьев-м7э]

3к подписчиков и 500к просмотров))

[@HafizurRahman-mw8bp]

There were no sequence when tightening the bolts There were no torque tightening there were no gasket and hardly used any manual proper tools.

[@a.b.__iii]

Doing all that they would soon go out of business

[@fazzrashid............2467]

This is the difference between books and experience.

[@fazzrashid............2467]

Doesn’t look like they will be going out off Buisness anytime soon,😂

[@mvcybron]

@@fazzrashid............2467 experience is not replacement for books. These gearboxes can not be designed by someone who has not read books. Need deep understand of mathematics and engineering to design. Repairing with premature tools and not following the right practice results in a sub standard product. Your comment explains why pakistan has not designed a single car. Designing and building world class cars require reading books for decades.

[@kevinaguilar2636]

Tf? Do You think they have the same money over there? they must work with whatever they have

[@ldegmtrainspotter]

Great work, super video! MEGA LIKE

[@pilihan_chanel]

Why transmision EM100 make in FM260 ranger?

[@dakar0323]

welignton ,david e filipe ,são os entendidos mesmo!

[@rogerswyer5357]

Fascinates me how they prefer to work on the ground.

[@Алекс-о2ж]

Самое главное всё хорошо помыть. Мытое - новое!)

[@ivan_filimonoff]

а литола пальцем намазать?! ручная работа!

[@PostApRU]

и накладки ручника приклепать, иль нах))))

[@leonidmoto5703]

Это не ремонт корбки, это мойка, поменяли только подшипник на первичном валу, и то поставили беушный, это что ремонт был?

[@HowtoMakeThings]

Step one: Find sandy or dusty environment to perform repair.

[@markcherriman6136]

Is that the new snap on tool tray he's got there ?.

[@warriordugan7236]

Many Snap-On items are overpriced Chinese crap.

[@Loustylz203]

I can’t believe they did all that work n didnt replace the clutch brake shoes 😂

[@FrostiTheRoadman]

That's what got me too 🤣

[@martinswiney2192]

Brakes? We dont need no stinkin brakes!

[@mvcybron]

That’s 2 extra dollars to spend. That’s like a years worth of salary for the child labours in pakistan.

[@mikeodonnell3492]

But that's not the actual clutch in the back. I was wondering what the function of that was.

[@martinswiney2192]

@@mvcybron children make great wheel chocks

[@guillermogalan5088]

2000 años de cultura los contemplan, ¿Estados Unidos?

[@PropperNaughtyGeezer]

Bei 19:01 und 20:14 müssten eigentlich die Lagerspiele eingestellt werden und der Schaft für das Ausrücklager scheint auch beschädigt zu sein.

[@scottmitchell497]

Would love to see elapsed time on all these rebuilds. They are all on super speed. How about real time clock at end of video?

[@UQRXD]

Air tools would make job faster. What's with working on the ground?