How to Refill CANON 045, 045H, 046, 046H Cartridges

Compatibility: Canon LBP611Cn, LBP612Cdw, LBP613Cdw, LBP653Cdw, LBP654Cdw, LBP654Cx, MF632Cdw, MF634Cdw, MF731Cdw, MF732Cdw, MF733Cdw, MF734Cdw, MF735Cdw, MF735Cx
Cartridge list: CANON 045, 045H, 046, 046H
Learn how to refill your CANON cartridges to save up to 80% on your printing costs.

[@insideurgirl]

God bless you sir. thank you

[@ramtek2702]

Wouldn't it be great if you furnished links to your products. What a concept!!!

[@JiggityWombat]

How much do you use for Canon 055 Starter cartridge for MF743cdw.

[@TheBigb1973]

step 1. make a hole. step 2 empty out what's in there. step 3. fill it. step 4. seal it. step 5 make another hole. step 6 empty what's in there. step 7. seal it again. is this correct?? I'm asking because I didn't see your 1st hole when you mentioned it.

[@kennexkasoka1675]

Explain it properly

[@Andrewsfgg]

How much toner is needed to fill cartridges. The whole bottle?

[@InkOwldotcom]

Yes, you will use the whole bottle. For Canon 045/045H, we supply 35g of black and 30g of color. For Canon 046/046H, we supply 60g of each color.

[@jimmyduong08]

hi, do these steps apply to the 054H toners as well?

[@InkOwldotcom]

Yes, the procedure is the same for 054H

[@jimgerlv1]

The photo of your cartridge does not look like mine. How do I know where to put the hole for the toner?

[@InkOwldotcom]

If your cartridge is not an original CANON, it may look slightly different. If you bought a toner refill kit from us, please contact us directly for tech support at [e-mail]

[@djfjfjfrench4770]

How can I burchase InkOwl Toner Refill Kitt ?

[@InkOwldotcom]

The refill kits are available at www.inkowl.com

[@grnatalii]

Canon i-SENSYS MF635Cx MF-635Cx Can I do this work with that printer???

[@InkOwldotcom]

Yes, this will work on that model!

[@camelCased]

Isn't there any way to open the cartridge without burning a hole in it?

[@InkOwldotcom]

Technically there are ways to get the cartridge open without making a hole, but it requires complete disassembly and is generally reserved for refill shops and professional remanufacturers of cartridges. You can look for "remanufacturing" instructions. As our products are targeted towards users and not professional refill shops, the methods we recommend are always a compromise between quality and ease of use. In our opinion, any marginal gain in quality from fully disassembling and cleaning out the cartridge simply does not justify the vastly more complex procedure and increased risk of error.

[@reneromero8135]

one time the chip is used, i can print anyway with the same chip after refill or this printer dont allow to print with the same ? i reffer to 054h or 054 sorry

[@InkOwldotcom]

You can print with the old chip as long as you want! You never need to change the chips on this printer

[@quiglag]

How many times can a cartridge be refilled?

[@InkOwldotcom]

CANON color laser cartridges can typically be refilled 3-5 times while maintaining an acceptable print quality. However, it's not the act of refilling itself that degrades the cartridge, but rather the printing thousands and thousands of pages. If the print quality was still satisfactory before the cartridge went empty, you can refill it another time!

[@WorldravenNevar]

What was that second hole thing about?

[@InkOwldotcom]

The second hole is for the "excess toner" or "waste toner" compartment. This compartment gradually fills up with use, and eventually it will fill up completely and the cartridge will stop working. So, to avoid this, we do recommend emptying this compartment out with every refill.

[@WorldravenNevar]

inkowl.com Gotcha. Thanks

[@angelawilson8062]

inkowl.com after you have refilled once, can you reuse the toner that comes out of the "waste" compartment?

[@CoolKoon]

@@angelawilson8062 You should never reuse waste toner. It's contaminated with dust and debris which you DON'T want to bring inside the toner feed mechanism.

[@lamatech5340]

to empty to old waste toner

[@sreshtagorrepati9427]

Can we able to refil mf631cn?

[@InkOwldotcom]

Yes, this video also applies to the MF631cn which uses 045/045H cartridges.

[@Dark-jn2pg]

How many grams of powder should I use to fill LBP612Cdw, LBP613Cdw model? Thank you so much

[@InkOwldotcom]

For this model, we recommend 35 grams of black or 30 grams of color.

[@Dark-jn2pg]

@@InkOwldotcom Thank you very much for your answer

[@dingirz8524]

Hi, it is not clear how to bypass the chip. do I have to cover it? thank you

[@InkOwldotcom]

No, there's no need to cover it or do anything, in fact, simply continue printing. The toner level won't be displayed, but the printer will print normally.

[@adamn7516]

@@InkOwldotcom So basically we have to just wait until we start to see printouts start to fade before we will know its getting low.

[@debbyfohr331]

What is the tool and where do you get it?

[@InkOwldotcom]

The toner holemaking tool can be purchased here: www.inkowl.com/laser/laser-refill-tools/hole-in-one-toner-cartridge-hole-making-tool-120v-for-north-america/P241/